1/* SPDX-License-Identifier: GPL-2.0-or-later */ 2/* 3 * linux/arch/arm/mm/proc-mohawk.S: MMU functions for Marvell PJ1 core 4 * 5 * PJ1 (codename Mohawk) is a hybrid of the xscale3 and Marvell's own core. 6 * 7 * Heavily based on proc-arm926.S and proc-xsc3.S 8 */ 9 10#include <linux/linkage.h> 11#include <linux/init.h> 12#include <asm/assembler.h> 13#include <asm/hwcap.h> 14#include <asm/pgtable-hwdef.h> 15#include <asm/pgtable.h> 16#include <asm/page.h> 17#include <asm/ptrace.h> 18#include "proc-macros.S" 19 20/* 21 * This is the maximum size of an area which will be flushed. If the 22 * area is larger than this, then we flush the whole cache. 23 */ 24#define CACHE_DLIMIT 32768 25 26/* 27 * The cache line size of the L1 D cache. 28 */ 29#define CACHE_DLINESIZE 32 30 31/* 32 * cpu_mohawk_proc_init() 33 */ 34ENTRY(cpu_mohawk_proc_init) 35 ret lr 36 37/* 38 * cpu_mohawk_proc_fin() 39 */ 40ENTRY(cpu_mohawk_proc_fin) 41 mrc p15, 0, r0, c1, c0, 0 @ ctrl register 42 bic r0, r0, #0x1800 @ ...iz........... 43 bic r0, r0, #0x0006 @ .............ca. 44 mcr p15, 0, r0, c1, c0, 0 @ disable caches 45 ret lr 46 47/* 48 * cpu_mohawk_reset(loc) 49 * 50 * Perform a soft reset of the system. Put the CPU into the 51 * same state as it would be if it had been reset, and branch 52 * to what would be the reset vector. 53 * 54 * loc: location to jump to for soft reset 55 * 56 * (same as arm926) 57 */ 58 .align 5 59 .pushsection .idmap.text, "ax" 60ENTRY(cpu_mohawk_reset) 61 mov ip, #0 62 mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches 63 mcr p15, 0, ip, c7, c10, 4 @ drain WB 64 mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs 65 mrc p15, 0, ip, c1, c0, 0 @ ctrl register 66 bic ip, ip, #0x0007 @ .............cam 67 bic ip, ip, #0x1100 @ ...i...s........ 68 mcr p15, 0, ip, c1, c0, 0 @ ctrl register 69 ret r0 70ENDPROC(cpu_mohawk_reset) 71 .popsection 72 73/* 74 * cpu_mohawk_do_idle() 75 * 76 * Called with IRQs disabled 77 */ 78 .align 5 79ENTRY(cpu_mohawk_do_idle) 80 mov r0, #0 81 mcr p15, 0, r0, c7, c10, 4 @ drain write buffer 82 mcr p15, 0, r0, c7, c0, 4 @ wait for interrupt 83 ret lr 84 85/* 86 * flush_icache_all() 87 * 88 * Unconditionally clean and invalidate the entire icache. 89 */ 90ENTRY(mohawk_flush_icache_all) 91 mov r0, #0 92 mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache 93 ret lr 94ENDPROC(mohawk_flush_icache_all) 95 96/* 97 * flush_user_cache_all() 98 * 99 * Clean and invalidate all cache entries in a particular 100 * address space. 101 */ 102ENTRY(mohawk_flush_user_cache_all) 103 /* FALLTHROUGH */ 104 105/* 106 * flush_kern_cache_all() 107 * 108 * Clean and invalidate the entire cache. 109 */ 110ENTRY(mohawk_flush_kern_cache_all) 111 mov r2, #VM_EXEC 112 mov ip, #0 113__flush_whole_cache: 114 mcr p15, 0, ip, c7, c14, 0 @ clean & invalidate all D cache 115 tst r2, #VM_EXEC 116 mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache 117 mcrne p15, 0, ip, c7, c10, 0 @ drain write buffer 118 ret lr 119 120/* 121 * flush_user_cache_range(start, end, flags) 122 * 123 * Clean and invalidate a range of cache entries in the 124 * specified address range. 125 * 126 * - start - start address (inclusive) 127 * - end - end address (exclusive) 128 * - flags - vm_flags describing address space 129 * 130 * (same as arm926) 131 */ 132ENTRY(mohawk_flush_user_cache_range) 133 mov ip, #0 134 sub r3, r1, r0 @ calculate total size 135 cmp r3, #CACHE_DLIMIT 136 bgt __flush_whole_cache 1371: tst r2, #VM_EXEC 138 mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D entry 139 mcrne p15, 0, r0, c7, c5, 1 @ invalidate I entry 140 add r0, r0, #CACHE_DLINESIZE 141 mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D entry 142 mcrne p15, 0, r0, c7, c5, 1 @ invalidate I entry 143 add r0, r0, #CACHE_DLINESIZE 144 cmp r0, r1 145 blo 1b 146 tst r2, #VM_EXEC 147 mcrne p15, 0, ip, c7, c10, 4 @ drain WB 148 ret lr 149 150/* 151 * coherent_kern_range(start, end) 152 * 153 * Ensure coherency between the Icache and the Dcache in the 154 * region described by start, end. If you have non-snooping 155 * Harvard caches, you need to implement this function. 156 * 157 * - start - virtual start address 158 * - end - virtual end address 159 */ 160ENTRY(mohawk_coherent_kern_range) 161 /* FALLTHROUGH */ 162 163/* 164 * coherent_user_range(start, end) 165 * 166 * Ensure coherency between the Icache and the Dcache in the 167 * region described by start, end. If you have non-snooping 168 * Harvard caches, you need to implement this function. 169 * 170 * - start - virtual start address 171 * - end - virtual end address 172 * 173 * (same as arm926) 174 */ 175ENTRY(mohawk_coherent_user_range) 176 bic r0, r0, #CACHE_DLINESIZE - 1 1771: mcr p15, 0, r0, c7, c10, 1 @ clean D entry 178 mcr p15, 0, r0, c7, c5, 1 @ invalidate I entry 179 add r0, r0, #CACHE_DLINESIZE 180 cmp r0, r1 181 blo 1b 182 mcr p15, 0, r0, c7, c10, 4 @ drain WB 183 mov r0, #0 184 ret lr 185 186/* 187 * flush_kern_dcache_area(void *addr, size_t size) 188 * 189 * Ensure no D cache aliasing occurs, either with itself or 190 * the I cache 191 * 192 * - addr - kernel address 193 * - size - region size 194 */ 195ENTRY(mohawk_flush_kern_dcache_area) 196 add r1, r0, r1 1971: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry 198 add r0, r0, #CACHE_DLINESIZE 199 cmp r0, r1 200 blo 1b 201 mov r0, #0 202 mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache 203 mcr p15, 0, r0, c7, c10, 4 @ drain WB 204 ret lr 205 206/* 207 * dma_inv_range(start, end) 208 * 209 * Invalidate (discard) the specified virtual address range. 210 * May not write back any entries. If 'start' or 'end' 211 * are not cache line aligned, those lines must be written 212 * back. 213 * 214 * - start - virtual start address 215 * - end - virtual end address 216 * 217 * (same as v4wb) 218 */ 219mohawk_dma_inv_range: 220 tst r0, #CACHE_DLINESIZE - 1 221 mcrne p15, 0, r0, c7, c10, 1 @ clean D entry 222 tst r1, #CACHE_DLINESIZE - 1 223 mcrne p15, 0, r1, c7, c10, 1 @ clean D entry 224 bic r0, r0, #CACHE_DLINESIZE - 1 2251: mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry 226 add r0, r0, #CACHE_DLINESIZE 227 cmp r0, r1 228 blo 1b 229 mcr p15, 0, r0, c7, c10, 4 @ drain WB 230 ret lr 231 232/* 233 * dma_clean_range(start, end) 234 * 235 * Clean the specified virtual address range. 236 * 237 * - start - virtual start address 238 * - end - virtual end address 239 * 240 * (same as v4wb) 241 */ 242mohawk_dma_clean_range: 243 bic r0, r0, #CACHE_DLINESIZE - 1 2441: mcr p15, 0, r0, c7, c10, 1 @ clean D entry 245 add r0, r0, #CACHE_DLINESIZE 246 cmp r0, r1 247 blo 1b 248 mcr p15, 0, r0, c7, c10, 4 @ drain WB 249 ret lr 250 251/* 252 * dma_flush_range(start, end) 253 * 254 * Clean and invalidate the specified virtual address range. 255 * 256 * - start - virtual start address 257 * - end - virtual end address 258 */ 259ENTRY(mohawk_dma_flush_range) 260 bic r0, r0, #CACHE_DLINESIZE - 1 2611: 262 mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry 263 add r0, r0, #CACHE_DLINESIZE 264 cmp r0, r1 265 blo 1b 266 mcr p15, 0, r0, c7, c10, 4 @ drain WB 267 ret lr 268 269/* 270 * dma_map_area(start, size, dir) 271 * - start - kernel virtual start address 272 * - size - size of region 273 * - dir - DMA direction 274 */ 275ENTRY(mohawk_dma_map_area) 276 add r1, r1, r0 277 cmp r2, #DMA_TO_DEVICE 278 beq mohawk_dma_clean_range 279 bcs mohawk_dma_inv_range 280 b mohawk_dma_flush_range 281ENDPROC(mohawk_dma_map_area) 282 283/* 284 * dma_unmap_area(start, size, dir) 285 * - start - kernel virtual start address 286 * - size - size of region 287 * - dir - DMA direction 288 */ 289ENTRY(mohawk_dma_unmap_area) 290 ret lr 291ENDPROC(mohawk_dma_unmap_area) 292 293 .globl mohawk_flush_kern_cache_louis 294 .equ mohawk_flush_kern_cache_louis, mohawk_flush_kern_cache_all 295 296 @ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S) 297 define_cache_functions mohawk 298 299ENTRY(cpu_mohawk_dcache_clean_area) 3001: mcr p15, 0, r0, c7, c10, 1 @ clean D entry 301 add r0, r0, #CACHE_DLINESIZE 302 subs r1, r1, #CACHE_DLINESIZE 303 bhi 1b 304 mcr p15, 0, r0, c7, c10, 4 @ drain WB 305 ret lr 306 307/* 308 * cpu_mohawk_switch_mm(pgd) 309 * 310 * Set the translation base pointer to be as described by pgd. 311 * 312 * pgd: new page tables 313 */ 314 .align 5 315ENTRY(cpu_mohawk_switch_mm) 316 mov ip, #0 317 mcr p15, 0, ip, c7, c14, 0 @ clean & invalidate all D cache 318 mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache 319 mcr p15, 0, ip, c7, c10, 4 @ drain WB 320 orr r0, r0, #0x18 @ cache the page table in L2 321 mcr p15, 0, r0, c2, c0, 0 @ load page table pointer 322 mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs 323 ret lr 324 325/* 326 * cpu_mohawk_set_pte_ext(ptep, pte, ext) 327 * 328 * Set a PTE and flush it out 329 */ 330 .align 5 331ENTRY(cpu_mohawk_set_pte_ext) 332#ifdef CONFIG_MMU 333 armv3_set_pte_ext 334 mov r0, r0 335 mcr p15, 0, r0, c7, c10, 1 @ clean D entry 336 mcr p15, 0, r0, c7, c10, 4 @ drain WB 337 ret lr 338#endif 339 340.globl cpu_mohawk_suspend_size 341.equ cpu_mohawk_suspend_size, 4 * 6 342#ifdef CONFIG_ARM_CPU_SUSPEND 343ENTRY(cpu_mohawk_do_suspend) 344 stmfd sp!, {r4 - r9, lr} 345 mrc p14, 0, r4, c6, c0, 0 @ clock configuration, for turbo mode 346 mrc p15, 0, r5, c15, c1, 0 @ CP access reg 347 mrc p15, 0, r6, c13, c0, 0 @ PID 348 mrc p15, 0, r7, c3, c0, 0 @ domain ID 349 mrc p15, 0, r8, c1, c0, 1 @ auxiliary control reg 350 mrc p15, 0, r9, c1, c0, 0 @ control reg 351 bic r4, r4, #2 @ clear frequency change bit 352 stmia r0, {r4 - r9} @ store cp regs 353 ldmia sp!, {r4 - r9, pc} 354ENDPROC(cpu_mohawk_do_suspend) 355 356ENTRY(cpu_mohawk_do_resume) 357 ldmia r0, {r4 - r9} @ load cp regs 358 mov ip, #0 359 mcr p15, 0, ip, c7, c7, 0 @ invalidate I & D caches, BTB 360 mcr p15, 0, ip, c7, c10, 4 @ drain write (&fill) buffer 361 mcr p15, 0, ip, c7, c5, 4 @ flush prefetch buffer 362 mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs 363 mcr p14, 0, r4, c6, c0, 0 @ clock configuration, turbo mode. 364 mcr p15, 0, r5, c15, c1, 0 @ CP access reg 365 mcr p15, 0, r6, c13, c0, 0 @ PID 366 mcr p15, 0, r7, c3, c0, 0 @ domain ID 367 orr r1, r1, #0x18 @ cache the page table in L2 368 mcr p15, 0, r1, c2, c0, 0 @ translation table base addr 369 mcr p15, 0, r8, c1, c0, 1 @ auxiliary control reg 370 mov r0, r9 @ control register 371 b cpu_resume_mmu 372ENDPROC(cpu_mohawk_do_resume) 373#endif 374 375 .type __mohawk_setup, #function 376__mohawk_setup: 377 mov r0, #0 378 mcr p15, 0, r0, c7, c7 @ invalidate I,D caches 379 mcr p15, 0, r0, c7, c10, 4 @ drain write buffer 380 mcr p15, 0, r0, c8, c7 @ invalidate I,D TLBs 381 orr r4, r4, #0x18 @ cache the page table in L2 382 mcr p15, 0, r4, c2, c0, 0 @ load page table pointer 383 384 mov r0, #0 @ don't allow CP access 385 mcr p15, 0, r0, c15, c1, 0 @ write CP access register 386 387 adr r5, mohawk_crval 388 ldmia r5, {r5, r6} 389 mrc p15, 0, r0, c1, c0 @ get control register 390 bic r0, r0, r5 391 orr r0, r0, r6 392 ret lr 393 394 .size __mohawk_setup, . - __mohawk_setup 395 396 /* 397 * R 398 * .RVI ZFRS BLDP WCAM 399 * .011 1001 ..00 0101 400 * 401 */ 402 .type mohawk_crval, #object 403mohawk_crval: 404 crval clear=0x00007f3f, mmuset=0x00003905, ucset=0x00001134 405 406 __INITDATA 407 408 @ define struct processor (see <asm/proc-fns.h> and proc-macros.S) 409 define_processor_functions mohawk, dabort=v5t_early_abort, pabort=legacy_pabort 410 411 .section ".rodata" 412 413 string cpu_arch_name, "armv5te" 414 string cpu_elf_name, "v5" 415 string cpu_mohawk_name, "Marvell 88SV331x" 416 417 .align 418 419 .section ".proc.info.init", #alloc 420 421 .type __88sv331x_proc_info,#object 422__88sv331x_proc_info: 423 .long 0x56158000 @ Marvell 88SV331x (MOHAWK) 424 .long 0xfffff000 425 .long PMD_TYPE_SECT | \ 426 PMD_SECT_BUFFERABLE | \ 427 PMD_SECT_CACHEABLE | \ 428 PMD_BIT4 | \ 429 PMD_SECT_AP_WRITE | \ 430 PMD_SECT_AP_READ 431 .long PMD_TYPE_SECT | \ 432 PMD_BIT4 | \ 433 PMD_SECT_AP_WRITE | \ 434 PMD_SECT_AP_READ 435 initfn __mohawk_setup, __88sv331x_proc_info 436 .long cpu_arch_name 437 .long cpu_elf_name 438 .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP 439 .long cpu_mohawk_name 440 .long mohawk_processor_functions 441 .long v4wbi_tlb_fns 442 .long v4wb_user_fns 443 .long mohawk_cache_fns 444 .size __88sv331x_proc_info, . - __88sv331x_proc_info 445