xref: /openbmc/linux/arch/arm/mm/proc-macros.S (revision fe7498ef) 
1/* SPDX-License-Identifier: GPL-2.0 */
2/*
3 * We need constants.h for:
4 *  VMA_VM_MM
5 *  VMA_VM_FLAGS
6 *  VM_EXEC
7 */
8#include <asm/asm-offsets.h>
9#include <asm/thread_info.h>
10
11#ifdef CONFIG_CPU_V7M
12#include <asm/v7m.h>
13#endif
14
15/*
16 * vma_vm_mm - get mm pointer from vma pointer (vma->vm_mm)
17 */
18	.macro	vma_vm_mm, rd, rn
19	ldr	\rd, [\rn, #VMA_VM_MM]
20	.endm
21
22/*
23 * vma_vm_flags - get vma->vm_flags
24 */
25	.macro	vma_vm_flags, rd, rn
26	ldr	\rd, [\rn, #VMA_VM_FLAGS]
27	.endm
28
29/*
30 * act_mm - get current->active_mm
31 */
32	.macro	act_mm, rd
33	get_current \rd
34	.if (TSK_ACTIVE_MM > IMM12_MASK)
35	add	\rd, \rd, #TSK_ACTIVE_MM & ~IMM12_MASK
36	.endif
37	ldr	\rd, [\rd, #TSK_ACTIVE_MM & IMM12_MASK]
38	.endm
39
40/*
41 * mmid - get context id from mm pointer (mm->context.id)
42 * note, this field is 64bit, so in big-endian the two words are swapped too.
43 */
44	.macro	mmid, rd, rn
45#ifdef __ARMEB__
46	ldr	\rd, [\rn, #MM_CONTEXT_ID + 4 ]
47#else
48	ldr	\rd, [\rn, #MM_CONTEXT_ID]
49#endif
50	.endm
51
52/*
53 * mask_asid - mask the ASID from the context ID
54 */
55	.macro	asid, rd, rn
56	and	\rd, \rn, #255
57	.endm
58
59	.macro	crval, clear, mmuset, ucset
60#ifdef CONFIG_MMU
61	.word	\clear
62	.word	\mmuset
63#else
64	.word	\clear
65	.word	\ucset
66#endif
67	.endm
68
69/*
70 * dcache_line_size - get the minimum D-cache line size from the CTR register
71 * on ARMv7.
72 */
73	.macro	dcache_line_size, reg, tmp
74#ifdef CONFIG_CPU_V7M
75	movw	\tmp, #:lower16:BASEADDR_V7M_SCB + V7M_SCB_CTR
76	movt	\tmp, #:upper16:BASEADDR_V7M_SCB + V7M_SCB_CTR
77	ldr     \tmp, [\tmp]
78#else
79	mrc	p15, 0, \tmp, c0, c0, 1		@ read ctr
80#endif
81	lsr	\tmp, \tmp, #16
82	and	\tmp, \tmp, #0xf		@ cache line size encoding
83	mov	\reg, #4			@ bytes per word
84	mov	\reg, \reg, lsl \tmp		@ actual cache line size
85	.endm
86
87/*
88 * icache_line_size - get the minimum I-cache line size from the CTR register
89 * on ARMv7.
90 */
91	.macro	icache_line_size, reg, tmp
92#ifdef CONFIG_CPU_V7M
93	movw	\tmp, #:lower16:BASEADDR_V7M_SCB + V7M_SCB_CTR
94	movt	\tmp, #:upper16:BASEADDR_V7M_SCB + V7M_SCB_CTR
95	ldr     \tmp, [\tmp]
96#else
97	mrc	p15, 0, \tmp, c0, c0, 1		@ read ctr
98#endif
99	and	\tmp, \tmp, #0xf		@ cache line size encoding
100	mov	\reg, #4			@ bytes per word
101	mov	\reg, \reg, lsl \tmp		@ actual cache line size
102	.endm
103
104/*
105 * Sanity check the PTE configuration for the code below - which makes
106 * certain assumptions about how these bits are laid out.
107 */
108#ifdef CONFIG_MMU
109#if L_PTE_SHARED != PTE_EXT_SHARED
110#error PTE shared bit mismatch
111#endif
112#if !defined (CONFIG_ARM_LPAE) && \
113	(L_PTE_XN+L_PTE_USER+L_PTE_RDONLY+L_PTE_DIRTY+L_PTE_YOUNG+\
114	 L_PTE_PRESENT) > L_PTE_SHARED
115#error Invalid Linux PTE bit settings
116#endif
117#endif	/* CONFIG_MMU */
118
119/*
120 * The ARMv6 and ARMv7 set_pte_ext translation function.
121 *
122 * Permission translation:
123 *  YUWD  APX AP1 AP0	SVC	User
124 *  0xxx   0   0   0	no acc	no acc
125 *  100x   1   0   1	r/o	no acc
126 *  10x0   1   0   1	r/o	no acc
127 *  1011   0   0   1	r/w	no acc
128 *  110x   1   1   1	r/o	r/o
129 *  11x0   1   1   1	r/o	r/o
130 *  1111   0   1   1	r/w	r/w
131 */
132	.macro	armv6_mt_table pfx
133\pfx\()_mt_table:
134	.long	0x00						@ L_PTE_MT_UNCACHED
135	.long	PTE_EXT_TEX(1)					@ L_PTE_MT_BUFFERABLE
136	.long	PTE_CACHEABLE					@ L_PTE_MT_WRITETHROUGH
137	.long	PTE_CACHEABLE | PTE_BUFFERABLE			@ L_PTE_MT_WRITEBACK
138	.long	PTE_BUFFERABLE					@ L_PTE_MT_DEV_SHARED
139	.long	0x00						@ unused
140	.long	0x00						@ L_PTE_MT_MINICACHE (not present)
141	.long	PTE_EXT_TEX(1) | PTE_CACHEABLE | PTE_BUFFERABLE	@ L_PTE_MT_WRITEALLOC
142	.long	0x00						@ unused
143	.long	PTE_EXT_TEX(1)					@ L_PTE_MT_DEV_WC
144	.long	0x00						@ unused
145	.long	PTE_CACHEABLE | PTE_BUFFERABLE			@ L_PTE_MT_DEV_CACHED
146	.long	PTE_EXT_TEX(2)					@ L_PTE_MT_DEV_NONSHARED
147	.long	0x00						@ unused
148	.long	0x00						@ unused
149	.long	PTE_CACHEABLE | PTE_BUFFERABLE | PTE_EXT_APX	@ L_PTE_MT_VECTORS
150	.endm
151
152	.macro	armv6_set_pte_ext pfx
153	str	r1, [r0], #2048			@ linux version
154
155	bic	r3, r1, #0x000003fc
156	bic	r3, r3, #PTE_TYPE_MASK
157	orr	r3, r3, r2
158	orr	r3, r3, #PTE_EXT_AP0 | 2
159
160	adr	ip, \pfx\()_mt_table
161	and	r2, r1, #L_PTE_MT_MASK
162	ldr	r2, [ip, r2]
163
164	eor	r1, r1, #L_PTE_DIRTY
165	tst	r1, #L_PTE_DIRTY|L_PTE_RDONLY
166	orrne	r3, r3, #PTE_EXT_APX
167
168	tst	r1, #L_PTE_USER
169	orrne	r3, r3, #PTE_EXT_AP1
170	tstne	r3, #PTE_EXT_APX
171
172	@ user read-only -> kernel read-only
173	bicne	r3, r3, #PTE_EXT_AP0
174
175	tst	r1, #L_PTE_XN
176	orrne	r3, r3, #PTE_EXT_XN
177
178	eor	r3, r3, r2
179
180	tst	r1, #L_PTE_YOUNG
181	tstne	r1, #L_PTE_PRESENT
182	moveq	r3, #0
183	tstne	r1, #L_PTE_NONE
184	movne	r3, #0
185
186	str	r3, [r0]
187	mcr	p15, 0, r0, c7, c10, 1		@ flush_pte
188	.endm
189
190
191/*
192 * The ARMv3, ARMv4 and ARMv5 set_pte_ext translation function,
193 * covering most CPUs except Xscale and Xscale 3.
194 *
195 * Permission translation:
196 *  YUWD   AP	SVC	User
197 *  0xxx  0x00	no acc	no acc
198 *  100x  0x00	r/o	no acc
199 *  10x0  0x00	r/o	no acc
200 *  1011  0x55	r/w	no acc
201 *  110x  0xaa	r/w	r/o
202 *  11x0  0xaa	r/w	r/o
203 *  1111  0xff	r/w	r/w
204 */
205	.macro	armv3_set_pte_ext wc_disable=1
206	str	r1, [r0], #2048			@ linux version
207
208	eor	r3, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY
209
210	bic	r2, r1, #PTE_SMALL_AP_MASK	@ keep C, B bits
211	bic	r2, r2, #PTE_TYPE_MASK
212	orr	r2, r2, #PTE_TYPE_SMALL
213
214	tst	r3, #L_PTE_USER			@ user?
215	orrne	r2, r2, #PTE_SMALL_AP_URO_SRW
216
217	tst	r3, #L_PTE_RDONLY | L_PTE_DIRTY	@ write and dirty?
218	orreq	r2, r2, #PTE_SMALL_AP_UNO_SRW
219
220	tst	r3, #L_PTE_PRESENT | L_PTE_YOUNG	@ present and young?
221	movne	r2, #0
222
223	.if	\wc_disable
224#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
225	tst	r2, #PTE_CACHEABLE
226	bicne	r2, r2, #PTE_BUFFERABLE
227#endif
228	.endif
229	str	r2, [r0]		@ hardware version
230	.endm
231
232
233/*
234 * Xscale set_pte_ext translation, split into two halves to cope
235 * with work-arounds.  r3 must be preserved by code between these
236 * two macros.
237 *
238 * Permission translation:
239 *  YUWD  AP	SVC	User
240 *  0xxx  00	no acc	no acc
241 *  100x  00	r/o	no acc
242 *  10x0  00	r/o	no acc
243 *  1011  01	r/w	no acc
244 *  110x  10	r/w	r/o
245 *  11x0  10	r/w	r/o
246 *  1111  11	r/w	r/w
247 */
248	.macro	xscale_set_pte_ext_prologue
249	str	r1, [r0]			@ linux version
250
251	eor	r3, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY
252
253	bic	r2, r1, #PTE_SMALL_AP_MASK	@ keep C, B bits
254	orr	r2, r2, #PTE_TYPE_EXT		@ extended page
255
256	tst	r3, #L_PTE_USER			@ user?
257	orrne	r2, r2, #PTE_EXT_AP_URO_SRW	@ yes -> user r/o, system r/w
258
259	tst	r3, #L_PTE_RDONLY | L_PTE_DIRTY	@ write and dirty?
260	orreq	r2, r2, #PTE_EXT_AP_UNO_SRW	@ yes -> user n/a, system r/w
261						@ combined with user -> user r/w
262	.endm
263
264	.macro	xscale_set_pte_ext_epilogue
265	tst	r3, #L_PTE_PRESENT | L_PTE_YOUNG	@ present and young?
266	movne	r2, #0				@ no -> fault
267
268	str	r2, [r0, #2048]!		@ hardware version
269	mov	ip, #0
270	mcr	p15, 0, r0, c7, c10, 1		@ clean L1 D line
271	mcr	p15, 0, ip, c7, c10, 4		@ data write barrier
272	.endm
273
274.macro define_processor_functions name:req, dabort:req, pabort:req, nommu=0, suspend=0, bugs=0
275/*
276 * If we are building for big.Little with branch predictor hardening,
277 * we need the processor function tables to remain available after boot.
278 */
279#if defined(CONFIG_BIG_LITTLE) && defined(CONFIG_HARDEN_BRANCH_PREDICTOR)
280	.section ".rodata"
281#endif
282	.type	\name\()_processor_functions, #object
283	.align 2
284ENTRY(\name\()_processor_functions)
285	.word	\dabort
286	.word	\pabort
287	.word	cpu_\name\()_proc_init
288	.word	\bugs
289	.word	cpu_\name\()_proc_fin
290	.word	cpu_\name\()_reset
291	.word	cpu_\name\()_do_idle
292	.word	cpu_\name\()_dcache_clean_area
293	.word	cpu_\name\()_switch_mm
294
295	.if \nommu
296	.word	0
297	.else
298	.word	cpu_\name\()_set_pte_ext
299	.endif
300
301	.if \suspend
302	.word	cpu_\name\()_suspend_size
303#ifdef CONFIG_ARM_CPU_SUSPEND
304	.word	cpu_\name\()_do_suspend
305	.word	cpu_\name\()_do_resume
306#else
307	.word	0
308	.word	0
309#endif
310	.else
311	.word	0
312	.word	0
313	.word	0
314	.endif
315
316	.size	\name\()_processor_functions, . - \name\()_processor_functions
317#if defined(CONFIG_BIG_LITTLE) && defined(CONFIG_HARDEN_BRANCH_PREDICTOR)
318	.previous
319#endif
320.endm
321
322.macro define_cache_functions name:req
323	.align 2
324	.type	\name\()_cache_fns, #object
325ENTRY(\name\()_cache_fns)
326	.long	\name\()_flush_icache_all
327	.long	\name\()_flush_kern_cache_all
328	.long   \name\()_flush_kern_cache_louis
329	.long	\name\()_flush_user_cache_all
330	.long	\name\()_flush_user_cache_range
331	.long	\name\()_coherent_kern_range
332	.long	\name\()_coherent_user_range
333	.long	\name\()_flush_kern_dcache_area
334	.long	\name\()_dma_map_area
335	.long	\name\()_dma_unmap_area
336	.long	\name\()_dma_flush_range
337	.size	\name\()_cache_fns, . - \name\()_cache_fns
338.endm
339
340.macro define_tlb_functions name:req, flags_up:req, flags_smp
341	.type	\name\()_tlb_fns, #object
342	.align 2
343ENTRY(\name\()_tlb_fns)
344	.long	\name\()_flush_user_tlb_range
345	.long	\name\()_flush_kern_tlb_range
346	.ifnb \flags_smp
347		ALT_SMP(.long	\flags_smp )
348		ALT_UP(.long	\flags_up )
349	.else
350		.long	\flags_up
351	.endif
352	.size	\name\()_tlb_fns, . - \name\()_tlb_fns
353.endm
354
355.macro globl_equ x, y
356	.globl	\x
357	.equ	\x, \y
358.endm
359
360.macro	initfn, func, base
361	.long	\func - \base
362.endm
363
364	/*
365	 * Macro to calculate the log2 size for the protection region
366	 * registers. This calculates rd = log2(size) - 1.  tmp must
367	 * not be the same register as rd.
368	 */
369.macro	pr_sz, rd, size, tmp
370	mov	\tmp, \size, lsr #12
371	mov	\rd, #11
3721:	movs	\tmp, \tmp, lsr #1
373	addne	\rd, \rd, #1
374	bne	1b
375.endm
376
377	/*
378	 * Macro to generate a protection region register value
379	 * given a pre-masked address, size, and enable bit.
380	 * Corrupts size.
381	 */
382.macro	pr_val, dest, addr, size, enable
383	pr_sz	\dest, \size, \size		@ calculate log2(size) - 1
384	orr	\dest, \addr, \dest, lsl #1	@ mask in the region size
385	orr	\dest, \dest, \enable
386.endm
387