xref: /openbmc/linux/arch/arm/mm/proc-macros.S (revision 48cc39c3) 
1/* SPDX-License-Identifier: GPL-2.0 */
2/*
3 * We need constants.h for:
4 *  VMA_VM_MM
5 *  VMA_VM_FLAGS
6 *  VM_EXEC
7 */
8#include <asm/asm-offsets.h>
9#include <asm/thread_info.h>
10
11#ifdef CONFIG_CPU_V7M
12#include <asm/v7m.h>
13#endif
14
15/*
16 * vma_vm_mm - get mm pointer from vma pointer (vma->vm_mm)
17 */
18	.macro	vma_vm_mm, rd, rn
19	ldr	\rd, [\rn, #VMA_VM_MM]
20	.endm
21
22/*
23 * vma_vm_flags - get vma->vm_flags
24 */
25	.macro	vma_vm_flags, rd, rn
26	ldr	\rd, [\rn, #VMA_VM_FLAGS]
27	.endm
28
29/*
30 * act_mm - get current->active_mm
31 */
32	.macro	act_mm, rd
33	get_thread_info \rd
34	ldr	\rd, [\rd, #TI_TASK]
35	.if (TSK_ACTIVE_MM > IMM12_MASK)
36	add	\rd, \rd, #TSK_ACTIVE_MM & ~IMM12_MASK
37	.endif
38	ldr	\rd, [\rd, #TSK_ACTIVE_MM & IMM12_MASK]
39	.endm
40
41/*
42 * mmid - get context id from mm pointer (mm->context.id)
43 * note, this field is 64bit, so in big-endian the two words are swapped too.
44 */
45	.macro	mmid, rd, rn
46#ifdef __ARMEB__
47	ldr	\rd, [\rn, #MM_CONTEXT_ID + 4 ]
48#else
49	ldr	\rd, [\rn, #MM_CONTEXT_ID]
50#endif
51	.endm
52
53/*
54 * mask_asid - mask the ASID from the context ID
55 */
56	.macro	asid, rd, rn
57	and	\rd, \rn, #255
58	.endm
59
60	.macro	crval, clear, mmuset, ucset
61#ifdef CONFIG_MMU
62	.word	\clear
63	.word	\mmuset
64#else
65	.word	\clear
66	.word	\ucset
67#endif
68	.endm
69
70/*
71 * dcache_line_size - get the minimum D-cache line size from the CTR register
72 * on ARMv7.
73 */
74	.macro	dcache_line_size, reg, tmp
75#ifdef CONFIG_CPU_V7M
76	movw	\tmp, #:lower16:BASEADDR_V7M_SCB + V7M_SCB_CTR
77	movt	\tmp, #:upper16:BASEADDR_V7M_SCB + V7M_SCB_CTR
78	ldr     \tmp, [\tmp]
79#else
80	mrc	p15, 0, \tmp, c0, c0, 1		@ read ctr
81#endif
82	lsr	\tmp, \tmp, #16
83	and	\tmp, \tmp, #0xf		@ cache line size encoding
84	mov	\reg, #4			@ bytes per word
85	mov	\reg, \reg, lsl \tmp		@ actual cache line size
86	.endm
87
88/*
89 * icache_line_size - get the minimum I-cache line size from the CTR register
90 * on ARMv7.
91 */
92	.macro	icache_line_size, reg, tmp
93#ifdef CONFIG_CPU_V7M
94	movw	\tmp, #:lower16:BASEADDR_V7M_SCB + V7M_SCB_CTR
95	movt	\tmp, #:upper16:BASEADDR_V7M_SCB + V7M_SCB_CTR
96	ldr     \tmp, [\tmp]
97#else
98	mrc	p15, 0, \tmp, c0, c0, 1		@ read ctr
99#endif
100	and	\tmp, \tmp, #0xf		@ cache line size encoding
101	mov	\reg, #4			@ bytes per word
102	mov	\reg, \reg, lsl \tmp		@ actual cache line size
103	.endm
104
105/*
106 * Sanity check the PTE configuration for the code below - which makes
107 * certain assumptions about how these bits are laid out.
108 */
109#ifdef CONFIG_MMU
110#if L_PTE_SHARED != PTE_EXT_SHARED
111#error PTE shared bit mismatch
112#endif
113#if !defined (CONFIG_ARM_LPAE) && \
114	(L_PTE_XN+L_PTE_USER+L_PTE_RDONLY+L_PTE_DIRTY+L_PTE_YOUNG+\
115	 L_PTE_PRESENT) > L_PTE_SHARED
116#error Invalid Linux PTE bit settings
117#endif
118#endif	/* CONFIG_MMU */
119
120/*
121 * The ARMv6 and ARMv7 set_pte_ext translation function.
122 *
123 * Permission translation:
124 *  YUWD  APX AP1 AP0	SVC	User
125 *  0xxx   0   0   0	no acc	no acc
126 *  100x   1   0   1	r/o	no acc
127 *  10x0   1   0   1	r/o	no acc
128 *  1011   0   0   1	r/w	no acc
129 *  110x   1   1   1	r/o	r/o
130 *  11x0   1   1   1	r/o	r/o
131 *  1111   0   1   1	r/w	r/w
132 */
133	.macro	armv6_mt_table pfx
134\pfx\()_mt_table:
135	.long	0x00						@ L_PTE_MT_UNCACHED
136	.long	PTE_EXT_TEX(1)					@ L_PTE_MT_BUFFERABLE
137	.long	PTE_CACHEABLE					@ L_PTE_MT_WRITETHROUGH
138	.long	PTE_CACHEABLE | PTE_BUFFERABLE			@ L_PTE_MT_WRITEBACK
139	.long	PTE_BUFFERABLE					@ L_PTE_MT_DEV_SHARED
140	.long	0x00						@ unused
141	.long	0x00						@ L_PTE_MT_MINICACHE (not present)
142	.long	PTE_EXT_TEX(1) | PTE_CACHEABLE | PTE_BUFFERABLE	@ L_PTE_MT_WRITEALLOC
143	.long	0x00						@ unused
144	.long	PTE_EXT_TEX(1)					@ L_PTE_MT_DEV_WC
145	.long	0x00						@ unused
146	.long	PTE_CACHEABLE | PTE_BUFFERABLE			@ L_PTE_MT_DEV_CACHED
147	.long	PTE_EXT_TEX(2)					@ L_PTE_MT_DEV_NONSHARED
148	.long	0x00						@ unused
149	.long	0x00						@ unused
150	.long	PTE_CACHEABLE | PTE_BUFFERABLE | PTE_EXT_APX	@ L_PTE_MT_VECTORS
151	.endm
152
153	.macro	armv6_set_pte_ext pfx
154	str	r1, [r0], #2048			@ linux version
155
156	bic	r3, r1, #0x000003fc
157	bic	r3, r3, #PTE_TYPE_MASK
158	orr	r3, r3, r2
159	orr	r3, r3, #PTE_EXT_AP0 | 2
160
161	adr	ip, \pfx\()_mt_table
162	and	r2, r1, #L_PTE_MT_MASK
163	ldr	r2, [ip, r2]
164
165	eor	r1, r1, #L_PTE_DIRTY
166	tst	r1, #L_PTE_DIRTY|L_PTE_RDONLY
167	orrne	r3, r3, #PTE_EXT_APX
168
169	tst	r1, #L_PTE_USER
170	orrne	r3, r3, #PTE_EXT_AP1
171	tstne	r3, #PTE_EXT_APX
172
173	@ user read-only -> kernel read-only
174	bicne	r3, r3, #PTE_EXT_AP0
175
176	tst	r1, #L_PTE_XN
177	orrne	r3, r3, #PTE_EXT_XN
178
179	eor	r3, r3, r2
180
181	tst	r1, #L_PTE_YOUNG
182	tstne	r1, #L_PTE_PRESENT
183	moveq	r3, #0
184	tstne	r1, #L_PTE_NONE
185	movne	r3, #0
186
187	str	r3, [r0]
188	mcr	p15, 0, r0, c7, c10, 1		@ flush_pte
189	.endm
190
191
192/*
193 * The ARMv3, ARMv4 and ARMv5 set_pte_ext translation function,
194 * covering most CPUs except Xscale and Xscale 3.
195 *
196 * Permission translation:
197 *  YUWD   AP	SVC	User
198 *  0xxx  0x00	no acc	no acc
199 *  100x  0x00	r/o	no acc
200 *  10x0  0x00	r/o	no acc
201 *  1011  0x55	r/w	no acc
202 *  110x  0xaa	r/w	r/o
203 *  11x0  0xaa	r/w	r/o
204 *  1111  0xff	r/w	r/w
205 */
206	.macro	armv3_set_pte_ext wc_disable=1
207	str	r1, [r0], #2048			@ linux version
208
209	eor	r3, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY
210
211	bic	r2, r1, #PTE_SMALL_AP_MASK	@ keep C, B bits
212	bic	r2, r2, #PTE_TYPE_MASK
213	orr	r2, r2, #PTE_TYPE_SMALL
214
215	tst	r3, #L_PTE_USER			@ user?
216	orrne	r2, r2, #PTE_SMALL_AP_URO_SRW
217
218	tst	r3, #L_PTE_RDONLY | L_PTE_DIRTY	@ write and dirty?
219	orreq	r2, r2, #PTE_SMALL_AP_UNO_SRW
220
221	tst	r3, #L_PTE_PRESENT | L_PTE_YOUNG	@ present and young?
222	movne	r2, #0
223
224	.if	\wc_disable
225#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
226	tst	r2, #PTE_CACHEABLE
227	bicne	r2, r2, #PTE_BUFFERABLE
228#endif
229	.endif
230	str	r2, [r0]		@ hardware version
231	.endm
232
233
234/*
235 * Xscale set_pte_ext translation, split into two halves to cope
236 * with work-arounds.  r3 must be preserved by code between these
237 * two macros.
238 *
239 * Permission translation:
240 *  YUWD  AP	SVC	User
241 *  0xxx  00	no acc	no acc
242 *  100x  00	r/o	no acc
243 *  10x0  00	r/o	no acc
244 *  1011  01	r/w	no acc
245 *  110x  10	r/w	r/o
246 *  11x0  10	r/w	r/o
247 *  1111  11	r/w	r/w
248 */
249	.macro	xscale_set_pte_ext_prologue
250	str	r1, [r0]			@ linux version
251
252	eor	r3, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY
253
254	bic	r2, r1, #PTE_SMALL_AP_MASK	@ keep C, B bits
255	orr	r2, r2, #PTE_TYPE_EXT		@ extended page
256
257	tst	r3, #L_PTE_USER			@ user?
258	orrne	r2, r2, #PTE_EXT_AP_URO_SRW	@ yes -> user r/o, system r/w
259
260	tst	r3, #L_PTE_RDONLY | L_PTE_DIRTY	@ write and dirty?
261	orreq	r2, r2, #PTE_EXT_AP_UNO_SRW	@ yes -> user n/a, system r/w
262						@ combined with user -> user r/w
263	.endm
264
265	.macro	xscale_set_pte_ext_epilogue
266	tst	r3, #L_PTE_PRESENT | L_PTE_YOUNG	@ present and young?
267	movne	r2, #0				@ no -> fault
268
269	str	r2, [r0, #2048]!		@ hardware version
270	mov	ip, #0
271	mcr	p15, 0, r0, c7, c10, 1		@ clean L1 D line
272	mcr	p15, 0, ip, c7, c10, 4		@ data write barrier
273	.endm
274
275.macro define_processor_functions name:req, dabort:req, pabort:req, nommu=0, suspend=0, bugs=0
276/*
277 * If we are building for big.Little with branch predictor hardening,
278 * we need the processor function tables to remain available after boot.
279 */
280#if defined(CONFIG_BIG_LITTLE) && defined(CONFIG_HARDEN_BRANCH_PREDICTOR)
281	.section ".rodata"
282#endif
283	.type	\name\()_processor_functions, #object
284	.align 2
285ENTRY(\name\()_processor_functions)
286	.word	\dabort
287	.word	\pabort
288	.word	cpu_\name\()_proc_init
289	.word	\bugs
290	.word	cpu_\name\()_proc_fin
291	.word	cpu_\name\()_reset
292	.word	cpu_\name\()_do_idle
293	.word	cpu_\name\()_dcache_clean_area
294	.word	cpu_\name\()_switch_mm
295
296	.if \nommu
297	.word	0
298	.else
299	.word	cpu_\name\()_set_pte_ext
300	.endif
301
302	.if \suspend
303	.word	cpu_\name\()_suspend_size
304#ifdef CONFIG_ARM_CPU_SUSPEND
305	.word	cpu_\name\()_do_suspend
306	.word	cpu_\name\()_do_resume
307#else
308	.word	0
309	.word	0
310#endif
311	.else
312	.word	0
313	.word	0
314	.word	0
315	.endif
316
317	.size	\name\()_processor_functions, . - \name\()_processor_functions
318#if defined(CONFIG_BIG_LITTLE) && defined(CONFIG_HARDEN_BRANCH_PREDICTOR)
319	.previous
320#endif
321.endm
322
323.macro define_cache_functions name:req
324	.align 2
325	.type	\name\()_cache_fns, #object
326ENTRY(\name\()_cache_fns)
327	.long	\name\()_flush_icache_all
328	.long	\name\()_flush_kern_cache_all
329	.long   \name\()_flush_kern_cache_louis
330	.long	\name\()_flush_user_cache_all
331	.long	\name\()_flush_user_cache_range
332	.long	\name\()_coherent_kern_range
333	.long	\name\()_coherent_user_range
334	.long	\name\()_flush_kern_dcache_area
335	.long	\name\()_dma_map_area
336	.long	\name\()_dma_unmap_area
337	.long	\name\()_dma_flush_range
338	.size	\name\()_cache_fns, . - \name\()_cache_fns
339.endm
340
341.macro define_tlb_functions name:req, flags_up:req, flags_smp
342	.type	\name\()_tlb_fns, #object
343ENTRY(\name\()_tlb_fns)
344	.long	\name\()_flush_user_tlb_range
345	.long	\name\()_flush_kern_tlb_range
346	.ifnb \flags_smp
347		ALT_SMP(.long	\flags_smp )
348		ALT_UP(.long	\flags_up )
349	.else
350		.long	\flags_up
351	.endif
352	.size	\name\()_tlb_fns, . - \name\()_tlb_fns
353.endm
354
355.macro globl_equ x, y
356	.globl	\x
357	.equ	\x, \y
358.endm
359
360.macro	initfn, func, base
361	.long	\func - \base
362.endm
363
364	/*
365	 * Macro to calculate the log2 size for the protection region
366	 * registers. This calculates rd = log2(size) - 1.  tmp must
367	 * not be the same register as rd.
368	 */
369.macro	pr_sz, rd, size, tmp
370	mov	\tmp, \size, lsr #12
371	mov	\rd, #11
3721:	movs	\tmp, \tmp, lsr #1
373	addne	\rd, \rd, #1
374	bne	1b
375.endm
376
377	/*
378	 * Macro to generate a protection region register value
379	 * given a pre-masked address, size, and enable bit.
380	 * Corrupts size.
381	 */
382.macro	pr_val, dest, addr, size, enable
383	pr_sz	\dest, \size, \size		@ calculate log2(size) - 1
384	orr	\dest, \addr, \dest, lsl #1	@ mask in the region size
385	orr	\dest, \dest, \enable
386.endm
387