xref: /openbmc/linux/arch/arm/mm/proc-fa526.S (revision 95e9fd10) 
1/*
2 *  linux/arch/arm/mm/proc-fa526.S: MMU functions for FA526
3 *
4 *  Written by : Luke Lee
5 *  Copyright (C) 2005 Faraday Corp.
6 *  Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or
11 * (at your option) any later version.
12 *
13 *
14 * These are the low level assembler for performing cache and TLB
15 * functions on the fa526.
16 */
17#include <linux/linkage.h>
18#include <linux/init.h>
19#include <asm/assembler.h>
20#include <asm/hwcap.h>
21#include <asm/pgtable-hwdef.h>
22#include <asm/pgtable.h>
23#include <asm/page.h>
24#include <asm/ptrace.h>
25
26#include "proc-macros.S"
27
28#define CACHE_DLINESIZE	16
29
30	.text
31/*
32 * cpu_fa526_proc_init()
33 */
34ENTRY(cpu_fa526_proc_init)
35	mov	pc, lr
36
37/*
38 * cpu_fa526_proc_fin()
39 */
40ENTRY(cpu_fa526_proc_fin)
41	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
42	bic	r0, r0, #0x1000			@ ...i............
43	bic	r0, r0, #0x000e			@ ............wca.
44	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
45	nop
46	nop
47	mov	pc, lr
48
49/*
50 * cpu_fa526_reset(loc)
51 *
52 * Perform a soft reset of the system.  Put the CPU into the
53 * same state as it would be if it had been reset, and branch
54 * to what would be the reset vector.
55 *
56 * loc: location to jump to for soft reset
57 */
58	.align	4
59	.pushsection	.idmap.text, "ax"
60ENTRY(cpu_fa526_reset)
61/* TODO: Use CP8 if possible... */
62	mov	ip, #0
63	mcr	p15, 0, ip, c7, c7, 0		@ invalidate I,D caches
64	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
65#ifdef CONFIG_MMU
66	mcr	p15, 0, ip, c8, c7, 0		@ invalidate I & D TLBs
67#endif
68	mrc	p15, 0, ip, c1, c0, 0		@ ctrl register
69	bic	ip, ip, #0x000f			@ ............wcam
70	bic	ip, ip, #0x1100			@ ...i...s........
71	bic	ip, ip, #0x0800			@ BTB off
72	mcr	p15, 0, ip, c1, c0, 0		@ ctrl register
73	nop
74	nop
75	mov	pc, r0
76ENDPROC(cpu_fa526_reset)
77	.popsection
78
79/*
80 * cpu_fa526_do_idle()
81 */
82	.align	4
83ENTRY(cpu_fa526_do_idle)
84	mcr	p15, 0, r0, c7, c0, 4		@ Wait for interrupt
85	mov	pc, lr
86
87
88ENTRY(cpu_fa526_dcache_clean_area)
891:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
90	add	r0, r0, #CACHE_DLINESIZE
91	subs	r1, r1, #CACHE_DLINESIZE
92	bhi	1b
93	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
94	mov	pc, lr
95
96/* =============================== PageTable ============================== */
97
98/*
99 * cpu_fa526_switch_mm(pgd)
100 *
101 * Set the translation base pointer to be as described by pgd.
102 *
103 * pgd: new page tables
104 */
105	.align	4
106ENTRY(cpu_fa526_switch_mm)
107#ifdef CONFIG_MMU
108	mov	ip, #0
109#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
110	mcr	p15, 0, ip, c7, c6, 0		@ invalidate D cache
111#else
112	mcr	p15, 0, ip, c7, c14, 0		@ clean and invalidate whole D cache
113#endif
114	mcr	p15, 0, ip, c7, c5, 0		@ invalidate I cache
115	mcr	p15, 0, ip, c7, c5, 6		@ invalidate BTB since mm changed
116	mcr	p15, 0, ip, c7, c10, 4		@ data write barrier
117	mcr	p15, 0, ip, c7, c5, 4		@ prefetch flush
118	mcr	p15, 0, r0, c2, c0, 0		@ load page table pointer
119	mcr	p15, 0, ip, c8, c7, 0		@ invalidate UTLB
120#endif
121	mov	pc, lr
122
123/*
124 * cpu_fa526_set_pte_ext(ptep, pte, ext)
125 *
126 * Set a PTE and flush it out
127 */
128	.align	4
129ENTRY(cpu_fa526_set_pte_ext)
130#ifdef CONFIG_MMU
131	armv3_set_pte_ext
132	mov	r0, r0
133	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
134	mov	r0, #0
135	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
136#endif
137	mov	pc, lr
138
139	__CPUINIT
140
141	.type	__fa526_setup, #function
142__fa526_setup:
143	/* On return of this routine, r0 must carry correct flags for CFG register */
144	mov	r0, #0
145	mcr	p15, 0, r0, c7, c7		@ invalidate I,D caches on v4
146	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer on v4
147#ifdef CONFIG_MMU
148	mcr	p15, 0, r0, c8, c7		@ invalidate I,D TLBs on v4
149#endif
150	mcr	p15, 0, r0, c7, c5, 5		@ invalidate IScratchpad RAM
151
152	mov	r0, #1
153	mcr	p15, 0, r0, c1, c1, 0		@ turn-on ECR
154
155	mov	r0, #0
156	mcr	p15, 0, r0, c7, c5, 6		@ invalidate BTB All
157	mcr	p15, 0, r0, c7, c10, 4		@ data write barrier
158	mcr	p15, 0, r0, c7, c5, 4		@ prefetch flush
159
160	mov	r0, #0x1f			@ Domains 0, 1 = manager, 2 = client
161	mcr	p15, 0, r0, c3, c0		@ load domain access register
162
163	mrc	p15, 0, r0, c1, c0		@ get control register v4
164	ldr	r5, fa526_cr1_clear
165	bic	r0, r0, r5
166	ldr	r5, fa526_cr1_set
167	orr	r0, r0, r5
168	mov	pc, lr
169	.size	__fa526_setup, . - __fa526_setup
170
171	/*
172	 * .RVI ZFRS BLDP WCAM
173	 * ..11 1001 .111 1101
174	 *
175	 */
176	.type	fa526_cr1_clear, #object
177	.type	fa526_cr1_set, #object
178fa526_cr1_clear:
179	.word	0x3f3f
180fa526_cr1_set:
181	.word	0x397D
182
183	__INITDATA
184
185	@ define struct processor (see <asm/proc-fns.h> and proc-macros.S)
186	define_processor_functions fa526, dabort=v4_early_abort, pabort=legacy_pabort
187
188	.section ".rodata"
189
190	string	cpu_arch_name, "armv4"
191	string	cpu_elf_name, "v4"
192	string	cpu_fa526_name, "FA526"
193
194	.align
195
196	.section ".proc.info.init", #alloc, #execinstr
197
198	.type	__fa526_proc_info,#object
199__fa526_proc_info:
200	.long	0x66015261
201	.long	0xff01fff1
202	.long   PMD_TYPE_SECT | \
203		PMD_SECT_BUFFERABLE | \
204		PMD_SECT_CACHEABLE | \
205		PMD_BIT4 | \
206		PMD_SECT_AP_WRITE | \
207		PMD_SECT_AP_READ
208	.long   PMD_TYPE_SECT | \
209		PMD_BIT4 | \
210		PMD_SECT_AP_WRITE | \
211		PMD_SECT_AP_READ
212	b	__fa526_setup
213	.long	cpu_arch_name
214	.long	cpu_elf_name
215	.long	HWCAP_SWP | HWCAP_HALF
216	.long	cpu_fa526_name
217	.long	fa526_processor_functions
218	.long	fa_tlb_fns
219	.long	fa_user_fns
220	.long	fa_cache_fns
221	.size	__fa526_proc_info, . - __fa526_proc_info
222