1/* SPDX-License-Identifier: GPL-2.0-only */ 2/* 3 * linux/arch/arm/mm/arm940.S: utility functions for ARM940T 4 * 5 * Copyright (C) 2004-2006 Hyok S. Choi (hyok.choi@samsung.com) 6 */ 7#include <linux/linkage.h> 8#include <linux/init.h> 9#include <asm/assembler.h> 10#include <asm/hwcap.h> 11#include <asm/pgtable-hwdef.h> 12#include <asm/pgtable.h> 13#include <asm/ptrace.h> 14#include "proc-macros.S" 15 16/* ARM940T has a 4KB DCache comprising 256 lines of 4 words */ 17#define CACHE_DLINESIZE 16 18#define CACHE_DSEGMENTS 4 19#define CACHE_DENTRIES 64 20 21 .text 22/* 23 * cpu_arm940_proc_init() 24 * cpu_arm940_switch_mm() 25 * 26 * These are not required. 27 */ 28ENTRY(cpu_arm940_proc_init) 29ENTRY(cpu_arm940_switch_mm) 30 ret lr 31 32/* 33 * cpu_arm940_proc_fin() 34 */ 35ENTRY(cpu_arm940_proc_fin) 36 mrc p15, 0, r0, c1, c0, 0 @ ctrl register 37 bic r0, r0, #0x00001000 @ i-cache 38 bic r0, r0, #0x00000004 @ d-cache 39 mcr p15, 0, r0, c1, c0, 0 @ disable caches 40 ret lr 41 42/* 43 * cpu_arm940_reset(loc) 44 * Params : r0 = address to jump to 45 * Notes : This sets up everything for a reset 46 */ 47 .pushsection .idmap.text, "ax" 48ENTRY(cpu_arm940_reset) 49 mov ip, #0 50 mcr p15, 0, ip, c7, c5, 0 @ flush I cache 51 mcr p15, 0, ip, c7, c6, 0 @ flush D cache 52 mcr p15, 0, ip, c7, c10, 4 @ drain WB 53 mrc p15, 0, ip, c1, c0, 0 @ ctrl register 54 bic ip, ip, #0x00000005 @ .............c.p 55 bic ip, ip, #0x00001000 @ i-cache 56 mcr p15, 0, ip, c1, c0, 0 @ ctrl register 57 ret r0 58ENDPROC(cpu_arm940_reset) 59 .popsection 60 61/* 62 * cpu_arm940_do_idle() 63 */ 64 .align 5 65ENTRY(cpu_arm940_do_idle) 66 mcr p15, 0, r0, c7, c0, 4 @ Wait for interrupt 67 ret lr 68 69/* 70 * flush_icache_all() 71 * 72 * Unconditionally clean and invalidate the entire icache. 73 */ 74ENTRY(arm940_flush_icache_all) 75 mov r0, #0 76 mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache 77 ret lr 78ENDPROC(arm940_flush_icache_all) 79 80/* 81 * flush_user_cache_all() 82 */ 83ENTRY(arm940_flush_user_cache_all) 84 /* FALLTHROUGH */ 85 86/* 87 * flush_kern_cache_all() 88 * 89 * Clean and invalidate the entire cache. 90 */ 91ENTRY(arm940_flush_kern_cache_all) 92 mov r2, #VM_EXEC 93 /* FALLTHROUGH */ 94 95/* 96 * flush_user_cache_range(start, end, flags) 97 * 98 * There is no efficient way to flush a range of cache entries 99 * in the specified address range. Thus, flushes all. 100 * 101 * - start - start address (inclusive) 102 * - end - end address (exclusive) 103 * - flags - vm_flags describing address space 104 */ 105ENTRY(arm940_flush_user_cache_range) 106 mov ip, #0 107#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH 108 mcr p15, 0, ip, c7, c6, 0 @ flush D cache 109#else 110 mov r1, #(CACHE_DSEGMENTS - 1) << 4 @ 4 segments 1111: orr r3, r1, #(CACHE_DENTRIES - 1) << 26 @ 64 entries 1122: mcr p15, 0, r3, c7, c14, 2 @ clean/flush D index 113 subs r3, r3, #1 << 26 114 bcs 2b @ entries 63 to 0 115 subs r1, r1, #1 << 4 116 bcs 1b @ segments 3 to 0 117#endif 118 tst r2, #VM_EXEC 119 mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache 120 mcrne p15, 0, ip, c7, c10, 4 @ drain WB 121 ret lr 122 123/* 124 * coherent_kern_range(start, end) 125 * 126 * Ensure coherency between the Icache and the Dcache in the 127 * region described by start, end. If you have non-snooping 128 * Harvard caches, you need to implement this function. 129 * 130 * - start - virtual start address 131 * - end - virtual end address 132 */ 133ENTRY(arm940_coherent_kern_range) 134 /* FALLTHROUGH */ 135 136/* 137 * coherent_user_range(start, end) 138 * 139 * Ensure coherency between the Icache and the Dcache in the 140 * region described by start, end. If you have non-snooping 141 * Harvard caches, you need to implement this function. 142 * 143 * - start - virtual start address 144 * - end - virtual end address 145 */ 146ENTRY(arm940_coherent_user_range) 147 /* FALLTHROUGH */ 148 149/* 150 * flush_kern_dcache_area(void *addr, size_t size) 151 * 152 * Ensure no D cache aliasing occurs, either with itself or 153 * the I cache 154 * 155 * - addr - kernel address 156 * - size - region size 157 */ 158ENTRY(arm940_flush_kern_dcache_area) 159 mov r0, #0 160 mov r1, #(CACHE_DSEGMENTS - 1) << 4 @ 4 segments 1611: orr r3, r1, #(CACHE_DENTRIES - 1) << 26 @ 64 entries 1622: mcr p15, 0, r3, c7, c14, 2 @ clean/flush D index 163 subs r3, r3, #1 << 26 164 bcs 2b @ entries 63 to 0 165 subs r1, r1, #1 << 4 166 bcs 1b @ segments 7 to 0 167 mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache 168 mcr p15, 0, r0, c7, c10, 4 @ drain WB 169 ret lr 170 171/* 172 * dma_inv_range(start, end) 173 * 174 * There is no efficient way to invalidate a specifid virtual 175 * address range. Thus, invalidates all. 176 * 177 * - start - virtual start address 178 * - end - virtual end address 179 */ 180arm940_dma_inv_range: 181 mov ip, #0 182 mov r1, #(CACHE_DSEGMENTS - 1) << 4 @ 4 segments 1831: orr r3, r1, #(CACHE_DENTRIES - 1) << 26 @ 64 entries 1842: mcr p15, 0, r3, c7, c6, 2 @ flush D entry 185 subs r3, r3, #1 << 26 186 bcs 2b @ entries 63 to 0 187 subs r1, r1, #1 << 4 188 bcs 1b @ segments 7 to 0 189 mcr p15, 0, ip, c7, c10, 4 @ drain WB 190 ret lr 191 192/* 193 * dma_clean_range(start, end) 194 * 195 * There is no efficient way to clean a specifid virtual 196 * address range. Thus, cleans all. 197 * 198 * - start - virtual start address 199 * - end - virtual end address 200 */ 201arm940_dma_clean_range: 202ENTRY(cpu_arm940_dcache_clean_area) 203 mov ip, #0 204#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH 205 mov r1, #(CACHE_DSEGMENTS - 1) << 4 @ 4 segments 2061: orr r3, r1, #(CACHE_DENTRIES - 1) << 26 @ 64 entries 2072: mcr p15, 0, r3, c7, c10, 2 @ clean D entry 208 subs r3, r3, #1 << 26 209 bcs 2b @ entries 63 to 0 210 subs r1, r1, #1 << 4 211 bcs 1b @ segments 7 to 0 212#endif 213 mcr p15, 0, ip, c7, c10, 4 @ drain WB 214 ret lr 215 216/* 217 * dma_flush_range(start, end) 218 * 219 * There is no efficient way to clean and invalidate a specifid 220 * virtual address range. 221 * 222 * - start - virtual start address 223 * - end - virtual end address 224 */ 225ENTRY(arm940_dma_flush_range) 226 mov ip, #0 227 mov r1, #(CACHE_DSEGMENTS - 1) << 4 @ 4 segments 2281: orr r3, r1, #(CACHE_DENTRIES - 1) << 26 @ 64 entries 2292: 230#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH 231 mcr p15, 0, r3, c7, c14, 2 @ clean/flush D entry 232#else 233 mcr p15, 0, r3, c7, c6, 2 @ invalidate D entry 234#endif 235 subs r3, r3, #1 << 26 236 bcs 2b @ entries 63 to 0 237 subs r1, r1, #1 << 4 238 bcs 1b @ segments 7 to 0 239 mcr p15, 0, ip, c7, c10, 4 @ drain WB 240 ret lr 241 242/* 243 * dma_map_area(start, size, dir) 244 * - start - kernel virtual start address 245 * - size - size of region 246 * - dir - DMA direction 247 */ 248ENTRY(arm940_dma_map_area) 249 add r1, r1, r0 250 cmp r2, #DMA_TO_DEVICE 251 beq arm940_dma_clean_range 252 bcs arm940_dma_inv_range 253 b arm940_dma_flush_range 254ENDPROC(arm940_dma_map_area) 255 256/* 257 * dma_unmap_area(start, size, dir) 258 * - start - kernel virtual start address 259 * - size - size of region 260 * - dir - DMA direction 261 */ 262ENTRY(arm940_dma_unmap_area) 263 ret lr 264ENDPROC(arm940_dma_unmap_area) 265 266 .globl arm940_flush_kern_cache_louis 267 .equ arm940_flush_kern_cache_louis, arm940_flush_kern_cache_all 268 269 @ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S) 270 define_cache_functions arm940 271 272 .type __arm940_setup, #function 273__arm940_setup: 274 mov r0, #0 275 mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache 276 mcr p15, 0, r0, c7, c6, 0 @ invalidate D cache 277 mcr p15, 0, r0, c7, c10, 4 @ drain WB 278 279 mcr p15, 0, r0, c6, c3, 0 @ disable data area 3~7 280 mcr p15, 0, r0, c6, c4, 0 281 mcr p15, 0, r0, c6, c5, 0 282 mcr p15, 0, r0, c6, c6, 0 283 mcr p15, 0, r0, c6, c7, 0 284 285 mcr p15, 0, r0, c6, c3, 1 @ disable instruction area 3~7 286 mcr p15, 0, r0, c6, c4, 1 287 mcr p15, 0, r0, c6, c5, 1 288 mcr p15, 0, r0, c6, c6, 1 289 mcr p15, 0, r0, c6, c7, 1 290 291 mov r0, #0x0000003F @ base = 0, size = 4GB 292 mcr p15, 0, r0, c6, c0, 0 @ set area 0, default 293 mcr p15, 0, r0, c6, c0, 1 294 295 ldr r0, =(CONFIG_DRAM_BASE & 0xFFFFF000) @ base[31:12] of RAM 296 ldr r7, =CONFIG_DRAM_SIZE >> 12 @ size of RAM (must be >= 4KB) 297 pr_val r3, r0, r7, #1 298 mcr p15, 0, r3, c6, c1, 0 @ set area 1, RAM 299 mcr p15, 0, r3, c6, c1, 1 300 301 ldr r0, =(CONFIG_FLASH_MEM_BASE & 0xFFFFF000) @ base[31:12] of FLASH 302 ldr r7, =CONFIG_FLASH_SIZE @ size of FLASH (must be >= 4KB) 303 pr_val r3, r0, r6, #1 304 mcr p15, 0, r3, c6, c2, 0 @ set area 2, ROM/FLASH 305 mcr p15, 0, r3, c6, c2, 1 306 307 mov r0, #0x06 308 mcr p15, 0, r0, c2, c0, 0 @ Region 1&2 cacheable 309 mcr p15, 0, r0, c2, c0, 1 310#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH 311 mov r0, #0x00 @ disable whole write buffer 312#else 313 mov r0, #0x02 @ Region 1 write bufferred 314#endif 315 mcr p15, 0, r0, c3, c0, 0 316 317 mov r0, #0x10000 318 sub r0, r0, #1 @ r0 = 0xffff 319 mcr p15, 0, r0, c5, c0, 0 @ all read/write access 320 mcr p15, 0, r0, c5, c0, 1 321 322 mrc p15, 0, r0, c1, c0 @ get control register 323 orr r0, r0, #0x00001000 @ I-cache 324 orr r0, r0, #0x00000005 @ MPU/D-cache 325 326 ret lr 327 328 .size __arm940_setup, . - __arm940_setup 329 330 __INITDATA 331 332 @ define struct processor (see <asm/proc-fns.h> and proc-macros.S) 333 define_processor_functions arm940, dabort=nommu_early_abort, pabort=legacy_pabort, nommu=1 334 335 .section ".rodata" 336 337 string cpu_arch_name, "armv4t" 338 string cpu_elf_name, "v4" 339 string cpu_arm940_name, "ARM940T" 340 341 .align 342 343 .section ".proc.info.init", "a" 344 345 .type __arm940_proc_info,#object 346__arm940_proc_info: 347 .long 0x41009400 348 .long 0xff00fff0 349 .long 0 350 initfn __arm940_setup, __arm940_proc_info 351 .long cpu_arch_name 352 .long cpu_elf_name 353 .long HWCAP_SWP | HWCAP_HALF | HWCAP_THUMB 354 .long cpu_arm940_name 355 .long arm940_processor_functions 356 .long 0 357 .long 0 358 .long arm940_cache_fns 359 .size __arm940_proc_info, . - __arm940_proc_info 360 361