xref: /openbmc/linux/arch/arm/mm/proc-arm922.S (revision 384740dc)
1/*
2 *  linux/arch/arm/mm/proc-arm922.S: MMU functions for ARM922
3 *
4 *  Copyright (C) 1999,2000 ARM Limited
5 *  Copyright (C) 2000 Deep Blue Solutions Ltd.
6 *  Copyright (C) 2001 Altera Corporation
7 *  hacked for non-paged-MM by Hyok S. Choi, 2003.
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License as published by
11 * the Free Software Foundation; either version 2 of the License, or
12 * (at your option) any later version.
13 *
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
17 * GNU General Public License for more details.
18 *
19 * You should have received a copy of the GNU General Public License
20 * along with this program; if not, write to the Free Software
21 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
22 *
23 *
24 * These are the low level assembler for performing cache and TLB
25 * functions on the arm922.
26 *
27 *  CONFIG_CPU_ARM922_CPU_IDLE -> nohlt
28 */
29#include <linux/linkage.h>
30#include <linux/init.h>
31#include <asm/assembler.h>
32#include <asm/elf.h>
33#include <asm/pgtable-hwdef.h>
34#include <asm/pgtable.h>
35#include <asm/page.h>
36#include <asm/ptrace.h>
37#include "proc-macros.S"
38
39/*
40 * The size of one data cache line.
41 */
42#define CACHE_DLINESIZE	32
43
44/*
45 * The number of data cache segments.
46 */
47#define CACHE_DSEGMENTS	4
48
49/*
50 * The number of lines in a cache segment.
51 */
52#define CACHE_DENTRIES	64
53
54/*
55 * This is the size at which it becomes more efficient to
56 * clean the whole cache, rather than using the individual
57 * cache line maintainence instructions.  (I think this should
58 * be 32768).
59 */
60#define CACHE_DLIMIT	8192
61
62
63	.text
64/*
65 * cpu_arm922_proc_init()
66 */
67ENTRY(cpu_arm922_proc_init)
68	mov	pc, lr
69
70/*
71 * cpu_arm922_proc_fin()
72 */
73ENTRY(cpu_arm922_proc_fin)
74	stmfd	sp!, {lr}
75	mov	ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
76	msr	cpsr_c, ip
77#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
78	bl	arm922_flush_kern_cache_all
79#else
80	bl	v4wt_flush_kern_cache_all
81#endif
82	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
83	bic	r0, r0, #0x1000			@ ...i............
84	bic	r0, r0, #0x000e			@ ............wca.
85	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
86	ldmfd	sp!, {pc}
87
88/*
89 * cpu_arm922_reset(loc)
90 *
91 * Perform a soft reset of the system.  Put the CPU into the
92 * same state as it would be if it had been reset, and branch
93 * to what would be the reset vector.
94 *
95 * loc: location to jump to for soft reset
96 */
97	.align	5
98ENTRY(cpu_arm922_reset)
99	mov	ip, #0
100	mcr	p15, 0, ip, c7, c7, 0		@ invalidate I,D caches
101	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
102#ifdef CONFIG_MMU
103	mcr	p15, 0, ip, c8, c7, 0		@ invalidate I & D TLBs
104#endif
105	mrc	p15, 0, ip, c1, c0, 0		@ ctrl register
106	bic	ip, ip, #0x000f			@ ............wcam
107	bic	ip, ip, #0x1100			@ ...i...s........
108	mcr	p15, 0, ip, c1, c0, 0		@ ctrl register
109	mov	pc, r0
110
111/*
112 * cpu_arm922_do_idle()
113 */
114	.align	5
115ENTRY(cpu_arm922_do_idle)
116	mcr	p15, 0, r0, c7, c0, 4		@ Wait for interrupt
117	mov	pc, lr
118
119
120#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
121
122/*
123 *	flush_user_cache_all()
124 *
125 *	Clean and invalidate all cache entries in a particular
126 *	address space.
127 */
128ENTRY(arm922_flush_user_cache_all)
129	/* FALLTHROUGH */
130
131/*
132 *	flush_kern_cache_all()
133 *
134 *	Clean and invalidate the entire cache.
135 */
136ENTRY(arm922_flush_kern_cache_all)
137	mov	r2, #VM_EXEC
138	mov	ip, #0
139__flush_whole_cache:
140	mov	r1, #(CACHE_DSEGMENTS - 1) << 5	@ 8 segments
1411:	orr	r3, r1, #(CACHE_DENTRIES - 1) << 26 @ 64 entries
1422:	mcr	p15, 0, r3, c7, c14, 2		@ clean+invalidate D index
143	subs	r3, r3, #1 << 26
144	bcs	2b				@ entries 63 to 0
145	subs	r1, r1, #1 << 5
146	bcs	1b				@ segments 7 to 0
147	tst	r2, #VM_EXEC
148	mcrne	p15, 0, ip, c7, c5, 0		@ invalidate I cache
149	mcrne	p15, 0, ip, c7, c10, 4		@ drain WB
150	mov	pc, lr
151
152/*
153 *	flush_user_cache_range(start, end, flags)
154 *
155 *	Clean and invalidate a range of cache entries in the
156 *	specified address range.
157 *
158 *	- start	- start address (inclusive)
159 *	- end	- end address (exclusive)
160 *	- flags	- vm_flags describing address space
161 */
162ENTRY(arm922_flush_user_cache_range)
163	mov	ip, #0
164	sub	r3, r1, r0			@ calculate total size
165	cmp	r3, #CACHE_DLIMIT
166	bhs	__flush_whole_cache
167
1681:	mcr	p15, 0, r0, c7, c14, 1		@ clean+invalidate D entry
169	tst	r2, #VM_EXEC
170	mcrne	p15, 0, r0, c7, c5, 1		@ invalidate I entry
171	add	r0, r0, #CACHE_DLINESIZE
172	cmp	r0, r1
173	blo	1b
174	tst	r2, #VM_EXEC
175	mcrne	p15, 0, ip, c7, c10, 4		@ drain WB
176	mov	pc, lr
177
178/*
179 *	coherent_kern_range(start, end)
180 *
181 *	Ensure coherency between the Icache and the Dcache in the
182 *	region described by start, end.  If you have non-snooping
183 *	Harvard caches, you need to implement this function.
184 *
185 *	- start	- virtual start address
186 *	- end	- virtual end address
187 */
188ENTRY(arm922_coherent_kern_range)
189	/* FALLTHROUGH */
190
191/*
192 *	coherent_user_range(start, end)
193 *
194 *	Ensure coherency between the Icache and the Dcache in the
195 *	region described by start, end.  If you have non-snooping
196 *	Harvard caches, you need to implement this function.
197 *
198 *	- start	- virtual start address
199 *	- end	- virtual end address
200 */
201ENTRY(arm922_coherent_user_range)
202	bic	r0, r0, #CACHE_DLINESIZE - 1
2031:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
204	mcr	p15, 0, r0, c7, c5, 1		@ invalidate I entry
205	add	r0, r0, #CACHE_DLINESIZE
206	cmp	r0, r1
207	blo	1b
208	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
209	mov	pc, lr
210
211/*
212 *	flush_kern_dcache_page(void *page)
213 *
214 *	Ensure no D cache aliasing occurs, either with itself or
215 *	the I cache
216 *
217 *	- addr	- page aligned address
218 */
219ENTRY(arm922_flush_kern_dcache_page)
220	add	r1, r0, #PAGE_SZ
2211:	mcr	p15, 0, r0, c7, c14, 1		@ clean+invalidate D entry
222	add	r0, r0, #CACHE_DLINESIZE
223	cmp	r0, r1
224	blo	1b
225	mov	r0, #0
226	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
227	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
228	mov	pc, lr
229
230/*
231 *	dma_inv_range(start, end)
232 *
233 *	Invalidate (discard) the specified virtual address range.
234 *	May not write back any entries.  If 'start' or 'end'
235 *	are not cache line aligned, those lines must be written
236 *	back.
237 *
238 *	- start	- virtual start address
239 *	- end	- virtual end address
240 *
241 * (same as v4wb)
242 */
243ENTRY(arm922_dma_inv_range)
244	tst	r0, #CACHE_DLINESIZE - 1
245	bic	r0, r0, #CACHE_DLINESIZE - 1
246	mcrne	p15, 0, r0, c7, c10, 1		@ clean D entry
247	tst	r1, #CACHE_DLINESIZE - 1
248	mcrne	p15, 0, r1, c7, c10, 1		@ clean D entry
2491:	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D entry
250	add	r0, r0, #CACHE_DLINESIZE
251	cmp	r0, r1
252	blo	1b
253	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
254	mov	pc, lr
255
256/*
257 *	dma_clean_range(start, end)
258 *
259 *	Clean the specified virtual address range.
260 *
261 *	- start	- virtual start address
262 *	- end	- virtual end address
263 *
264 * (same as v4wb)
265 */
266ENTRY(arm922_dma_clean_range)
267	bic	r0, r0, #CACHE_DLINESIZE - 1
2681:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
269	add	r0, r0, #CACHE_DLINESIZE
270	cmp	r0, r1
271	blo	1b
272	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
273	mov	pc, lr
274
275/*
276 *	dma_flush_range(start, end)
277 *
278 *	Clean and invalidate the specified virtual address range.
279 *
280 *	- start	- virtual start address
281 *	- end	- virtual end address
282 */
283ENTRY(arm922_dma_flush_range)
284	bic	r0, r0, #CACHE_DLINESIZE - 1
2851:	mcr	p15, 0, r0, c7, c14, 1		@ clean+invalidate D entry
286	add	r0, r0, #CACHE_DLINESIZE
287	cmp	r0, r1
288	blo	1b
289	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
290	mov	pc, lr
291
292ENTRY(arm922_cache_fns)
293	.long	arm922_flush_kern_cache_all
294	.long	arm922_flush_user_cache_all
295	.long	arm922_flush_user_cache_range
296	.long	arm922_coherent_kern_range
297	.long	arm922_coherent_user_range
298	.long	arm922_flush_kern_dcache_page
299	.long	arm922_dma_inv_range
300	.long	arm922_dma_clean_range
301	.long	arm922_dma_flush_range
302
303#endif
304
305
306ENTRY(cpu_arm922_dcache_clean_area)
307#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
3081:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
309	add	r0, r0, #CACHE_DLINESIZE
310	subs	r1, r1, #CACHE_DLINESIZE
311	bhi	1b
312#endif
313	mov	pc, lr
314
315/* =============================== PageTable ============================== */
316
317/*
318 * cpu_arm922_switch_mm(pgd)
319 *
320 * Set the translation base pointer to be as described by pgd.
321 *
322 * pgd: new page tables
323 */
324	.align	5
325ENTRY(cpu_arm922_switch_mm)
326#ifdef CONFIG_MMU
327	mov	ip, #0
328#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
329	mcr	p15, 0, ip, c7, c6, 0		@ invalidate D cache
330#else
331@ && 'Clean & Invalidate whole DCache'
332@ && Re-written to use Index Ops.
333@ && Uses registers r1, r3 and ip
334
335	mov	r1, #(CACHE_DSEGMENTS - 1) << 5	@ 4 segments
3361:	orr	r3, r1, #(CACHE_DENTRIES - 1) << 26 @ 64 entries
3372:	mcr	p15, 0, r3, c7, c14, 2		@ clean & invalidate D index
338	subs	r3, r3, #1 << 26
339	bcs	2b				@ entries 63 to 0
340	subs	r1, r1, #1 << 5
341	bcs	1b				@ segments 7 to 0
342#endif
343	mcr	p15, 0, ip, c7, c5, 0		@ invalidate I cache
344	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
345	mcr	p15, 0, r0, c2, c0, 0		@ load page table pointer
346	mcr	p15, 0, ip, c8, c7, 0		@ invalidate I & D TLBs
347#endif
348	mov	pc, lr
349
350/*
351 * cpu_arm922_set_pte_ext(ptep, pte, ext)
352 *
353 * Set a PTE and flush it out
354 */
355	.align	5
356ENTRY(cpu_arm922_set_pte_ext)
357#ifdef CONFIG_MMU
358	str	r1, [r0], #-2048		@ linux version
359
360	eor	r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
361
362	bic	r2, r1, #PTE_SMALL_AP_MASK
363	bic	r2, r2, #PTE_TYPE_MASK
364	orr	r2, r2, #PTE_TYPE_SMALL
365
366	tst	r1, #L_PTE_USER			@ User?
367	orrne	r2, r2, #PTE_SMALL_AP_URO_SRW
368
369	tst	r1, #L_PTE_WRITE | L_PTE_DIRTY	@ Write and Dirty?
370	orreq	r2, r2, #PTE_SMALL_AP_UNO_SRW
371
372	tst	r1, #L_PTE_PRESENT | L_PTE_YOUNG	@ Present and Young?
373	movne	r2, #0
374
375#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
376	eor	r3, r2, #0x0a			@ C & small page?
377	tst	r3, #0x0b
378	biceq	r2, r2, #4
379#endif
380	str	r2, [r0]			@ hardware version
381	mov	r0, r0
382	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
383	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
384#endif /* CONFIG_MMU */
385	mov	pc, lr
386
387	__INIT
388
389	.type	__arm922_setup, #function
390__arm922_setup:
391	mov	r0, #0
392	mcr	p15, 0, r0, c7, c7		@ invalidate I,D caches on v4
393	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer on v4
394#ifdef CONFIG_MMU
395	mcr	p15, 0, r0, c8, c7		@ invalidate I,D TLBs on v4
396#endif
397	adr	r5, arm922_crval
398	ldmia	r5, {r5, r6}
399	mrc	p15, 0, r0, c1, c0		@ get control register v4
400	bic	r0, r0, r5
401	orr	r0, r0, r6
402	mov	pc, lr
403	.size	__arm922_setup, . - __arm922_setup
404
405	/*
406	 *  R
407	 * .RVI ZFRS BLDP WCAM
408	 * ..11 0001 ..11 0101
409	 *
410	 */
411	.type	arm922_crval, #object
412arm922_crval:
413	crval	clear=0x00003f3f, mmuset=0x00003135, ucset=0x00001130
414
415	__INITDATA
416
417/*
418 * Purpose : Function pointers used to access above functions - all calls
419 *	     come through these
420 */
421	.type	arm922_processor_functions, #object
422arm922_processor_functions:
423	.word	v4t_early_abort
424	.word	pabort_noifar
425	.word	cpu_arm922_proc_init
426	.word	cpu_arm922_proc_fin
427	.word	cpu_arm922_reset
428	.word   cpu_arm922_do_idle
429	.word	cpu_arm922_dcache_clean_area
430	.word	cpu_arm922_switch_mm
431	.word	cpu_arm922_set_pte_ext
432	.size	arm922_processor_functions, . - arm922_processor_functions
433
434	.section ".rodata"
435
436	.type	cpu_arch_name, #object
437cpu_arch_name:
438	.asciz	"armv4t"
439	.size	cpu_arch_name, . - cpu_arch_name
440
441	.type	cpu_elf_name, #object
442cpu_elf_name:
443	.asciz	"v4"
444	.size	cpu_elf_name, . - cpu_elf_name
445
446	.type	cpu_arm922_name, #object
447cpu_arm922_name:
448	.asciz	"ARM922T"
449	.size	cpu_arm922_name, . - cpu_arm922_name
450
451	.align
452
453	.section ".proc.info.init", #alloc, #execinstr
454
455	.type	__arm922_proc_info,#object
456__arm922_proc_info:
457	.long	0x41009220
458	.long	0xff00fff0
459	.long   PMD_TYPE_SECT | \
460		PMD_SECT_BUFFERABLE | \
461		PMD_SECT_CACHEABLE | \
462		PMD_BIT4 | \
463		PMD_SECT_AP_WRITE | \
464		PMD_SECT_AP_READ
465	.long   PMD_TYPE_SECT | \
466		PMD_BIT4 | \
467		PMD_SECT_AP_WRITE | \
468		PMD_SECT_AP_READ
469	b	__arm922_setup
470	.long	cpu_arch_name
471	.long	cpu_elf_name
472	.long	HWCAP_SWP | HWCAP_HALF | HWCAP_THUMB
473	.long	cpu_arm922_name
474	.long	arm922_processor_functions
475	.long	v4wbi_tlb_fns
476	.long	v4wb_user_fns
477#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
478	.long	arm922_cache_fns
479#else
480	.long	v4wt_cache_fns
481#endif
482	.size	__arm922_proc_info, . - __arm922_proc_info
483