xref: /openbmc/linux/arch/arm/mm/cache-v6.S (revision d5e7cafd)
1/*
2 *  linux/arch/arm/mm/cache-v6.S
3 *
4 *  Copyright (C) 2001 Deep Blue Solutions Ltd.
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
9 *
10 *  This is the "shell" of the ARMv6 processor support.
11 */
12#include <linux/linkage.h>
13#include <linux/init.h>
14#include <asm/assembler.h>
15#include <asm/errno.h>
16#include <asm/unwind.h>
17
18#include "proc-macros.S"
19
20#define HARVARD_CACHE
21#define CACHE_LINE_SIZE		32
22#define D_CACHE_LINE_SIZE	32
23#define BTB_FLUSH_SIZE		8
24
25/*
26 *	v6_flush_icache_all()
27 *
28 *	Flush the whole I-cache.
29 *
30 *	ARM1136 erratum 411920 - Invalidate Instruction Cache operation can fail.
31 *	This erratum is present in 1136, 1156 and 1176. It does not affect the
32 *	MPCore.
33 *
34 *	Registers:
35 *	r0 - set to 0
36 *	r1 - corrupted
37 */
38ENTRY(v6_flush_icache_all)
39	mov	r0, #0
40#ifdef CONFIG_ARM_ERRATA_411920
41	mrs	r1, cpsr
42	cpsid	ifa				@ disable interrupts
43	mcr	p15, 0, r0, c7, c5, 0		@ invalidate entire I-cache
44	mcr	p15, 0, r0, c7, c5, 0		@ invalidate entire I-cache
45	mcr	p15, 0, r0, c7, c5, 0		@ invalidate entire I-cache
46	mcr	p15, 0, r0, c7, c5, 0		@ invalidate entire I-cache
47	msr	cpsr_cx, r1			@ restore interrupts
48	.rept	11				@ ARM Ltd recommends at least
49	nop					@ 11 NOPs
50	.endr
51#else
52	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I-cache
53#endif
54	ret	lr
55ENDPROC(v6_flush_icache_all)
56
57/*
58 *	v6_flush_cache_all()
59 *
60 *	Flush the entire cache.
61 *
62 *	It is assumed that:
63 */
64ENTRY(v6_flush_kern_cache_all)
65	mov	r0, #0
66#ifdef HARVARD_CACHE
67	mcr	p15, 0, r0, c7, c14, 0		@ D cache clean+invalidate
68#ifndef CONFIG_ARM_ERRATA_411920
69	mcr	p15, 0, r0, c7, c5, 0		@ I+BTB cache invalidate
70#else
71	b	v6_flush_icache_all
72#endif
73#else
74	mcr	p15, 0, r0, c7, c15, 0		@ Cache clean+invalidate
75#endif
76	ret	lr
77
78/*
79 *	v6_flush_cache_all()
80 *
81 *	Flush all TLB entries in a particular address space
82 *
83 *	- mm    - mm_struct describing address space
84 */
85ENTRY(v6_flush_user_cache_all)
86	/*FALLTHROUGH*/
87
88/*
89 *	v6_flush_cache_range(start, end, flags)
90 *
91 *	Flush a range of TLB entries in the specified address space.
92 *
93 *	- start - start address (may not be aligned)
94 *	- end   - end address (exclusive, may not be aligned)
95 *	- flags	- vm_area_struct flags describing address space
96 *
97 *	It is assumed that:
98 *	- we have a VIPT cache.
99 */
100ENTRY(v6_flush_user_cache_range)
101	ret	lr
102
103/*
104 *	v6_coherent_kern_range(start,end)
105 *
106 *	Ensure that the I and D caches are coherent within specified
107 *	region.  This is typically used when code has been written to
108 *	a memory region, and will be executed.
109 *
110 *	- start   - virtual start address of region
111 *	- end     - virtual end address of region
112 *
113 *	It is assumed that:
114 *	- the Icache does not read data from the write buffer
115 */
116ENTRY(v6_coherent_kern_range)
117	/* FALLTHROUGH */
118
119/*
120 *	v6_coherent_user_range(start,end)
121 *
122 *	Ensure that the I and D caches are coherent within specified
123 *	region.  This is typically used when code has been written to
124 *	a memory region, and will be executed.
125 *
126 *	- start   - virtual start address of region
127 *	- end     - virtual end address of region
128 *
129 *	It is assumed that:
130 *	- the Icache does not read data from the write buffer
131 */
132ENTRY(v6_coherent_user_range)
133 UNWIND(.fnstart		)
134#ifdef HARVARD_CACHE
135	bic	r0, r0, #CACHE_LINE_SIZE - 1
1361:
137 USER(	mcr	p15, 0, r0, c7, c10, 1	)	@ clean D line
138	add	r0, r0, #CACHE_LINE_SIZE
139	cmp	r0, r1
140	blo	1b
141#endif
142	mov	r0, #0
143#ifdef HARVARD_CACHE
144	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer
145#ifndef CONFIG_ARM_ERRATA_411920
146	mcr	p15, 0, r0, c7, c5, 0		@ I+BTB cache invalidate
147#else
148	b	v6_flush_icache_all
149#endif
150#else
151	mcr	p15, 0, r0, c7, c5, 6		@ invalidate BTB
152#endif
153	ret	lr
154
155/*
156 * Fault handling for the cache operation above. If the virtual address in r0
157 * isn't mapped, fail with -EFAULT.
158 */
1599001:
160	mov	r0, #-EFAULT
161	ret	lr
162 UNWIND(.fnend		)
163ENDPROC(v6_coherent_user_range)
164ENDPROC(v6_coherent_kern_range)
165
166/*
167 *	v6_flush_kern_dcache_area(void *addr, size_t size)
168 *
169 *	Ensure that the data held in the page kaddr is written back
170 *	to the page in question.
171 *
172 *	- addr	- kernel address
173 *	- size	- region size
174 */
175ENTRY(v6_flush_kern_dcache_area)
176	add	r1, r0, r1
177	bic	r0, r0, #D_CACHE_LINE_SIZE - 1
1781:
179#ifdef HARVARD_CACHE
180	mcr	p15, 0, r0, c7, c14, 1		@ clean & invalidate D line
181#else
182	mcr	p15, 0, r0, c7, c15, 1		@ clean & invalidate unified line
183#endif
184	add	r0, r0, #D_CACHE_LINE_SIZE
185	cmp	r0, r1
186	blo	1b
187#ifdef HARVARD_CACHE
188	mov	r0, #0
189	mcr	p15, 0, r0, c7, c10, 4
190#endif
191	ret	lr
192
193
194/*
195 *	v6_dma_inv_range(start,end)
196 *
197 *	Invalidate the data cache within the specified region; we will
198 *	be performing a DMA operation in this region and we want to
199 *	purge old data in the cache.
200 *
201 *	- start   - virtual start address of region
202 *	- end     - virtual end address of region
203 */
204v6_dma_inv_range:
205#ifdef CONFIG_DMA_CACHE_RWFO
206	ldrb	r2, [r0]			@ read for ownership
207	strb	r2, [r0]			@ write for ownership
208#endif
209	tst	r0, #D_CACHE_LINE_SIZE - 1
210	bic	r0, r0, #D_CACHE_LINE_SIZE - 1
211#ifdef HARVARD_CACHE
212	mcrne	p15, 0, r0, c7, c10, 1		@ clean D line
213#else
214	mcrne	p15, 0, r0, c7, c11, 1		@ clean unified line
215#endif
216	tst	r1, #D_CACHE_LINE_SIZE - 1
217#ifdef CONFIG_DMA_CACHE_RWFO
218	ldrneb	r2, [r1, #-1]			@ read for ownership
219	strneb	r2, [r1, #-1]			@ write for ownership
220#endif
221	bic	r1, r1, #D_CACHE_LINE_SIZE - 1
222#ifdef HARVARD_CACHE
223	mcrne	p15, 0, r1, c7, c14, 1		@ clean & invalidate D line
224#else
225	mcrne	p15, 0, r1, c7, c15, 1		@ clean & invalidate unified line
226#endif
2271:
228#ifdef HARVARD_CACHE
229	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D line
230#else
231	mcr	p15, 0, r0, c7, c7, 1		@ invalidate unified line
232#endif
233	add	r0, r0, #D_CACHE_LINE_SIZE
234	cmp	r0, r1
235#ifdef CONFIG_DMA_CACHE_RWFO
236	ldrlo	r2, [r0]			@ read for ownership
237	strlo	r2, [r0]			@ write for ownership
238#endif
239	blo	1b
240	mov	r0, #0
241	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer
242	ret	lr
243
244/*
245 *	v6_dma_clean_range(start,end)
246 *	- start   - virtual start address of region
247 *	- end     - virtual end address of region
248 */
249v6_dma_clean_range:
250	bic	r0, r0, #D_CACHE_LINE_SIZE - 1
2511:
252#ifdef CONFIG_DMA_CACHE_RWFO
253	ldr	r2, [r0]			@ read for ownership
254#endif
255#ifdef HARVARD_CACHE
256	mcr	p15, 0, r0, c7, c10, 1		@ clean D line
257#else
258	mcr	p15, 0, r0, c7, c11, 1		@ clean unified line
259#endif
260	add	r0, r0, #D_CACHE_LINE_SIZE
261	cmp	r0, r1
262	blo	1b
263	mov	r0, #0
264	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer
265	ret	lr
266
267/*
268 *	v6_dma_flush_range(start,end)
269 *	- start   - virtual start address of region
270 *	- end     - virtual end address of region
271 */
272ENTRY(v6_dma_flush_range)
273#ifdef CONFIG_DMA_CACHE_RWFO
274	ldrb	r2, [r0]		@ read for ownership
275	strb	r2, [r0]		@ write for ownership
276#endif
277	bic	r0, r0, #D_CACHE_LINE_SIZE - 1
2781:
279#ifdef HARVARD_CACHE
280	mcr	p15, 0, r0, c7, c14, 1		@ clean & invalidate D line
281#else
282	mcr	p15, 0, r0, c7, c15, 1		@ clean & invalidate line
283#endif
284	add	r0, r0, #D_CACHE_LINE_SIZE
285	cmp	r0, r1
286#ifdef CONFIG_DMA_CACHE_RWFO
287	ldrlob	r2, [r0]			@ read for ownership
288	strlob	r2, [r0]			@ write for ownership
289#endif
290	blo	1b
291	mov	r0, #0
292	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer
293	ret	lr
294
295/*
296 *	dma_map_area(start, size, dir)
297 *	- start	- kernel virtual start address
298 *	- size	- size of region
299 *	- dir	- DMA direction
300 */
301ENTRY(v6_dma_map_area)
302	add	r1, r1, r0
303	teq	r2, #DMA_FROM_DEVICE
304	beq	v6_dma_inv_range
305#ifndef CONFIG_DMA_CACHE_RWFO
306	b	v6_dma_clean_range
307#else
308	teq	r2, #DMA_TO_DEVICE
309	beq	v6_dma_clean_range
310	b	v6_dma_flush_range
311#endif
312ENDPROC(v6_dma_map_area)
313
314/*
315 *	dma_unmap_area(start, size, dir)
316 *	- start	- kernel virtual start address
317 *	- size	- size of region
318 *	- dir	- DMA direction
319 */
320ENTRY(v6_dma_unmap_area)
321#ifndef CONFIG_DMA_CACHE_RWFO
322	add	r1, r1, r0
323	teq	r2, #DMA_TO_DEVICE
324	bne	v6_dma_inv_range
325#endif
326	ret	lr
327ENDPROC(v6_dma_unmap_area)
328
329	.globl	v6_flush_kern_cache_louis
330	.equ	v6_flush_kern_cache_louis, v6_flush_kern_cache_all
331
332	__INITDATA
333
334	@ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
335	define_cache_functions v6
336