xref: /openbmc/linux/arch/arm/mm/cache-uniphier.c (revision f3539c12)
1 /*
2  * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
3  *
4  * This program is free software; you can redistribute it and/or modify
5  * it under the terms of the GNU General Public License as published by
6  * the Free Software Foundation; either version 2 of the License, or
7  * (at your option) any later version.
8  *
9  * This program is distributed in the hope that it will be useful,
10  * but WITHOUT ANY WARRANTY; without even the implied warranty of
11  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
12  * GNU General Public License for more details.
13  */
14 
15 #define pr_fmt(fmt)		"uniphier: " fmt
16 
17 #include <linux/init.h>
18 #include <linux/io.h>
19 #include <linux/log2.h>
20 #include <linux/of_address.h>
21 #include <linux/slab.h>
22 #include <asm/hardware/cache-uniphier.h>
23 #include <asm/outercache.h>
24 
25 /* control registers */
26 #define UNIPHIER_SSCC		0x0	/* Control Register */
27 #define    UNIPHIER_SSCC_BST			BIT(20)	/* UCWG burst read */
28 #define    UNIPHIER_SSCC_ACT			BIT(19)	/* Inst-Data separate */
29 #define    UNIPHIER_SSCC_WTG			BIT(18)	/* WT gathering on */
30 #define    UNIPHIER_SSCC_PRD			BIT(17)	/* enable pre-fetch */
31 #define    UNIPHIER_SSCC_ON			BIT(0)	/* enable cache */
32 #define UNIPHIER_SSCLPDAWCR	0x30	/* Unified/Data Active Way Control */
33 #define UNIPHIER_SSCLPIAWCR	0x34	/* Instruction Active Way Control */
34 
35 /* revision registers */
36 #define UNIPHIER_SSCID		0x0	/* ID Register */
37 
38 /* operation registers */
39 #define UNIPHIER_SSCOPE		0x244	/* Cache Operation Primitive Entry */
40 #define    UNIPHIER_SSCOPE_CM_INV		0x0	/* invalidate */
41 #define    UNIPHIER_SSCOPE_CM_CLEAN		0x1	/* clean */
42 #define    UNIPHIER_SSCOPE_CM_FLUSH		0x2	/* flush */
43 #define    UNIPHIER_SSCOPE_CM_SYNC		0x8	/* sync (drain bufs) */
44 #define    UNIPHIER_SSCOPE_CM_FLUSH_PREFETCH	0x9	/* flush p-fetch buf */
45 #define UNIPHIER_SSCOQM		0x248	/* Cache Operation Queue Mode */
46 #define    UNIPHIER_SSCOQM_TID_MASK		(0x3 << 21)
47 #define    UNIPHIER_SSCOQM_TID_LRU_DATA		(0x0 << 21)
48 #define    UNIPHIER_SSCOQM_TID_LRU_INST		(0x1 << 21)
49 #define    UNIPHIER_SSCOQM_TID_WAY		(0x2 << 21)
50 #define    UNIPHIER_SSCOQM_S_MASK		(0x3 << 17)
51 #define    UNIPHIER_SSCOQM_S_RANGE		(0x0 << 17)
52 #define    UNIPHIER_SSCOQM_S_ALL		(0x1 << 17)
53 #define    UNIPHIER_SSCOQM_S_WAY		(0x2 << 17)
54 #define    UNIPHIER_SSCOQM_CE			BIT(15)	/* notify completion */
55 #define    UNIPHIER_SSCOQM_CM_INV		0x0	/* invalidate */
56 #define    UNIPHIER_SSCOQM_CM_CLEAN		0x1	/* clean */
57 #define    UNIPHIER_SSCOQM_CM_FLUSH		0x2	/* flush */
58 #define    UNIPHIER_SSCOQM_CM_PREFETCH		0x3	/* prefetch to cache */
59 #define    UNIPHIER_SSCOQM_CM_PREFETCH_BUF	0x4	/* prefetch to pf-buf */
60 #define    UNIPHIER_SSCOQM_CM_TOUCH		0x5	/* touch */
61 #define    UNIPHIER_SSCOQM_CM_TOUCH_ZERO	0x6	/* touch to zero */
62 #define    UNIPHIER_SSCOQM_CM_TOUCH_DIRTY	0x7	/* touch with dirty */
63 #define UNIPHIER_SSCOQAD	0x24c	/* Cache Operation Queue Address */
64 #define UNIPHIER_SSCOQSZ	0x250	/* Cache Operation Queue Size */
65 #define UNIPHIER_SSCOQMASK	0x254	/* Cache Operation Queue Address Mask */
66 #define UNIPHIER_SSCOQWN	0x258	/* Cache Operation Queue Way Number */
67 #define UNIPHIER_SSCOPPQSEF	0x25c	/* Cache Operation Queue Set Complete*/
68 #define    UNIPHIER_SSCOPPQSEF_FE		BIT(1)
69 #define    UNIPHIER_SSCOPPQSEF_OE		BIT(0)
70 #define UNIPHIER_SSCOLPQS	0x260	/* Cache Operation Queue Status */
71 #define    UNIPHIER_SSCOLPQS_EF			BIT(2)
72 #define    UNIPHIER_SSCOLPQS_EST		BIT(1)
73 #define    UNIPHIER_SSCOLPQS_QST		BIT(0)
74 
75 /* Is the touch/pre-fetch destination specified by ways? */
76 #define UNIPHIER_SSCOQM_TID_IS_WAY(op) \
77 		((op & UNIPHIER_SSCOQM_TID_MASK) == UNIPHIER_SSCOQM_TID_WAY)
78 /* Is the operation region specified by address range? */
79 #define UNIPHIER_SSCOQM_S_IS_RANGE(op) \
80 		((op & UNIPHIER_SSCOQM_S_MASK) == UNIPHIER_SSCOQM_S_RANGE)
81 
82 /**
83  * uniphier_cache_data - UniPhier outer cache specific data
84  *
85  * @ctrl_base: virtual base address of control registers
86  * @rev_base: virtual base address of revision registers
87  * @op_base: virtual base address of operation registers
88  * @way_present_mask: each bit specifies if the way is present
89  * @way_locked_mask: each bit specifies if the way is locked
90  * @nsets: number of associativity sets
91  * @line_size: line size in bytes
92  * @range_op_max_size: max size that can be handled by a single range operation
93  * @list: list node to include this level in the whole cache hierarchy
94  */
95 struct uniphier_cache_data {
96 	void __iomem *ctrl_base;
97 	void __iomem *rev_base;
98 	void __iomem *op_base;
99 	void __iomem *way_ctrl_base;
100 	u32 way_present_mask;
101 	u32 way_locked_mask;
102 	u32 nsets;
103 	u32 line_size;
104 	u32 range_op_max_size;
105 	struct list_head list;
106 };
107 
108 /*
109  * List of the whole outer cache hierarchy.  This list is only modified during
110  * the early boot stage, so no mutex is taken for the access to the list.
111  */
112 static LIST_HEAD(uniphier_cache_list);
113 
114 /**
115  * __uniphier_cache_sync - perform a sync point for a particular cache level
116  *
117  * @data: cache controller specific data
118  */
119 static void __uniphier_cache_sync(struct uniphier_cache_data *data)
120 {
121 	/* This sequence need not be atomic.  Do not disable IRQ. */
122 	writel_relaxed(UNIPHIER_SSCOPE_CM_SYNC,
123 		       data->op_base + UNIPHIER_SSCOPE);
124 	/* need a read back to confirm */
125 	readl_relaxed(data->op_base + UNIPHIER_SSCOPE);
126 }
127 
128 /**
129  * __uniphier_cache_maint_common - run a queue operation for a particular level
130  *
131  * @data: cache controller specific data
132  * @start: start address of range operation (don't care for "all" operation)
133  * @size: data size of range operation (don't care for "all" operation)
134  * @operation: flags to specify the desired cache operation
135  */
136 static void __uniphier_cache_maint_common(struct uniphier_cache_data *data,
137 					  unsigned long start,
138 					  unsigned long size,
139 					  u32 operation)
140 {
141 	unsigned long flags;
142 
143 	/*
144 	 * No spin lock is necessary here because:
145 	 *
146 	 * [1] This outer cache controller is able to accept maintenance
147 	 * operations from multiple CPUs at a time in an SMP system; if a
148 	 * maintenance operation is under way and another operation is issued,
149 	 * the new one is stored in the queue.  The controller performs one
150 	 * operation after another.  If the queue is full, the status register,
151 	 * UNIPHIER_SSCOPPQSEF, indicates that the queue registration has
152 	 * failed.  The status registers, UNIPHIER_{SSCOPPQSEF, SSCOLPQS}, have
153 	 * different instances for each CPU, i.e. each CPU can track the status
154 	 * of the maintenance operations triggered by itself.
155 	 *
156 	 * [2] The cache command registers, UNIPHIER_{SSCOQM, SSCOQAD, SSCOQSZ,
157 	 * SSCOQWN}, are shared between multiple CPUs, but the hardware still
158 	 * guarantees the registration sequence is atomic; the write access to
159 	 * them are arbitrated by the hardware.  The first accessor to the
160 	 * register, UNIPHIER_SSCOQM, holds the access right and it is released
161 	 * by reading the status register, UNIPHIER_SSCOPPQSEF.  While one CPU
162 	 * is holding the access right, other CPUs fail to register operations.
163 	 * One CPU should not hold the access right for a long time, so local
164 	 * IRQs should be disabled while the following sequence.
165 	 */
166 	local_irq_save(flags);
167 
168 	/* clear the complete notification flag */
169 	writel_relaxed(UNIPHIER_SSCOLPQS_EF, data->op_base + UNIPHIER_SSCOLPQS);
170 
171 	do {
172 		/* set cache operation */
173 		writel_relaxed(UNIPHIER_SSCOQM_CE | operation,
174 			       data->op_base + UNIPHIER_SSCOQM);
175 
176 		/* set address range if needed */
177 		if (likely(UNIPHIER_SSCOQM_S_IS_RANGE(operation))) {
178 			writel_relaxed(start, data->op_base + UNIPHIER_SSCOQAD);
179 			writel_relaxed(size, data->op_base + UNIPHIER_SSCOQSZ);
180 		}
181 
182 		/* set target ways if needed */
183 		if (unlikely(UNIPHIER_SSCOQM_TID_IS_WAY(operation)))
184 			writel_relaxed(data->way_locked_mask,
185 				       data->op_base + UNIPHIER_SSCOQWN);
186 	} while (unlikely(readl_relaxed(data->op_base + UNIPHIER_SSCOPPQSEF) &
187 			  (UNIPHIER_SSCOPPQSEF_FE | UNIPHIER_SSCOPPQSEF_OE)));
188 
189 	/* wait until the operation is completed */
190 	while (likely(readl_relaxed(data->op_base + UNIPHIER_SSCOLPQS) !=
191 		      UNIPHIER_SSCOLPQS_EF))
192 		cpu_relax();
193 
194 	local_irq_restore(flags);
195 }
196 
197 static void __uniphier_cache_maint_all(struct uniphier_cache_data *data,
198 				       u32 operation)
199 {
200 	__uniphier_cache_maint_common(data, 0, 0,
201 				      UNIPHIER_SSCOQM_S_ALL | operation);
202 
203 	__uniphier_cache_sync(data);
204 }
205 
206 static void __uniphier_cache_maint_range(struct uniphier_cache_data *data,
207 					 unsigned long start, unsigned long end,
208 					 u32 operation)
209 {
210 	unsigned long size;
211 
212 	/*
213 	 * If the start address is not aligned,
214 	 * perform a cache operation for the first cache-line
215 	 */
216 	start = start & ~(data->line_size - 1);
217 
218 	size = end - start;
219 
220 	if (unlikely(size >= (unsigned long)(-data->line_size))) {
221 		/* this means cache operation for all range */
222 		__uniphier_cache_maint_all(data, operation);
223 		return;
224 	}
225 
226 	/*
227 	 * If the end address is not aligned,
228 	 * perform a cache operation for the last cache-line
229 	 */
230 	size = ALIGN(size, data->line_size);
231 
232 	while (size) {
233 		unsigned long chunk_size = min_t(unsigned long, size,
234 						 data->range_op_max_size);
235 
236 		__uniphier_cache_maint_common(data, start, chunk_size,
237 					UNIPHIER_SSCOQM_S_RANGE | operation);
238 
239 		start += chunk_size;
240 		size -= chunk_size;
241 	}
242 
243 	__uniphier_cache_sync(data);
244 }
245 
246 static void __uniphier_cache_enable(struct uniphier_cache_data *data, bool on)
247 {
248 	u32 val = 0;
249 
250 	if (on)
251 		val = UNIPHIER_SSCC_WTG | UNIPHIER_SSCC_PRD | UNIPHIER_SSCC_ON;
252 
253 	writel_relaxed(val, data->ctrl_base + UNIPHIER_SSCC);
254 }
255 
256 static void __init __uniphier_cache_set_locked_ways(
257 					struct uniphier_cache_data *data,
258 					u32 way_mask)
259 {
260 	unsigned int cpu;
261 
262 	data->way_locked_mask = way_mask & data->way_present_mask;
263 
264 	for_each_possible_cpu(cpu)
265 		writel_relaxed(~data->way_locked_mask & data->way_present_mask,
266 			       data->way_ctrl_base + 4 * cpu);
267 }
268 
269 static void uniphier_cache_maint_range(unsigned long start, unsigned long end,
270 				       u32 operation)
271 {
272 	struct uniphier_cache_data *data;
273 
274 	list_for_each_entry(data, &uniphier_cache_list, list)
275 		__uniphier_cache_maint_range(data, start, end, operation);
276 }
277 
278 static void uniphier_cache_maint_all(u32 operation)
279 {
280 	struct uniphier_cache_data *data;
281 
282 	list_for_each_entry(data, &uniphier_cache_list, list)
283 		__uniphier_cache_maint_all(data, operation);
284 }
285 
286 static void uniphier_cache_inv_range(unsigned long start, unsigned long end)
287 {
288 	uniphier_cache_maint_range(start, end, UNIPHIER_SSCOQM_CM_INV);
289 }
290 
291 static void uniphier_cache_clean_range(unsigned long start, unsigned long end)
292 {
293 	uniphier_cache_maint_range(start, end, UNIPHIER_SSCOQM_CM_CLEAN);
294 }
295 
296 static void uniphier_cache_flush_range(unsigned long start, unsigned long end)
297 {
298 	uniphier_cache_maint_range(start, end, UNIPHIER_SSCOQM_CM_FLUSH);
299 }
300 
301 static void __init uniphier_cache_inv_all(void)
302 {
303 	uniphier_cache_maint_all(UNIPHIER_SSCOQM_CM_INV);
304 }
305 
306 static void uniphier_cache_flush_all(void)
307 {
308 	uniphier_cache_maint_all(UNIPHIER_SSCOQM_CM_FLUSH);
309 }
310 
311 static void uniphier_cache_disable(void)
312 {
313 	struct uniphier_cache_data *data;
314 
315 	list_for_each_entry_reverse(data, &uniphier_cache_list, list)
316 		__uniphier_cache_enable(data, false);
317 
318 	uniphier_cache_flush_all();
319 }
320 
321 static void __init uniphier_cache_enable(void)
322 {
323 	struct uniphier_cache_data *data;
324 
325 	uniphier_cache_inv_all();
326 
327 	list_for_each_entry(data, &uniphier_cache_list, list) {
328 		__uniphier_cache_enable(data, true);
329 		__uniphier_cache_set_locked_ways(data, 0);
330 	}
331 }
332 
333 static void uniphier_cache_sync(void)
334 {
335 	struct uniphier_cache_data *data;
336 
337 	list_for_each_entry(data, &uniphier_cache_list, list)
338 		__uniphier_cache_sync(data);
339 }
340 
341 int __init uniphier_cache_l2_is_enabled(void)
342 {
343 	struct uniphier_cache_data *data;
344 
345 	data = list_first_entry_or_null(&uniphier_cache_list,
346 					struct uniphier_cache_data, list);
347 	if (!data)
348 		return 0;
349 
350 	return !!(readl_relaxed(data->ctrl_base + UNIPHIER_SSCC) &
351 		  UNIPHIER_SSCC_ON);
352 }
353 
354 void __init uniphier_cache_l2_touch_range(unsigned long start,
355 					  unsigned long end)
356 {
357 	struct uniphier_cache_data *data;
358 
359 	data = list_first_entry_or_null(&uniphier_cache_list,
360 					struct uniphier_cache_data, list);
361 	if (data)
362 		__uniphier_cache_maint_range(data, start, end,
363 					     UNIPHIER_SSCOQM_TID_WAY |
364 					     UNIPHIER_SSCOQM_CM_TOUCH);
365 }
366 
367 void __init uniphier_cache_l2_set_locked_ways(u32 way_mask)
368 {
369 	struct uniphier_cache_data *data;
370 
371 	data = list_first_entry_or_null(&uniphier_cache_list,
372 					struct uniphier_cache_data, list);
373 	if (data)
374 		__uniphier_cache_set_locked_ways(data, way_mask);
375 }
376 
377 static const struct of_device_id uniphier_cache_match[] __initconst = {
378 	{
379 		.compatible = "socionext,uniphier-system-cache",
380 	},
381 	{ /* sentinel */ }
382 };
383 
384 static int __init __uniphier_cache_init(struct device_node *np,
385 					unsigned int *cache_level)
386 {
387 	struct uniphier_cache_data *data;
388 	u32 level, cache_size;
389 	struct device_node *next_np;
390 	int ret = 0;
391 
392 	if (!of_match_node(uniphier_cache_match, np)) {
393 		pr_err("L%d: not compatible with uniphier cache\n",
394 		       *cache_level);
395 		return -EINVAL;
396 	}
397 
398 	if (of_property_read_u32(np, "cache-level", &level)) {
399 		pr_err("L%d: cache-level is not specified\n", *cache_level);
400 		return -EINVAL;
401 	}
402 
403 	if (level != *cache_level) {
404 		pr_err("L%d: cache-level is unexpected value %d\n",
405 		       *cache_level, level);
406 		return -EINVAL;
407 	}
408 
409 	if (!of_property_read_bool(np, "cache-unified")) {
410 		pr_err("L%d: cache-unified is not specified\n", *cache_level);
411 		return -EINVAL;
412 	}
413 
414 	data = kzalloc(sizeof(*data), GFP_KERNEL);
415 	if (!data)
416 		return -ENOMEM;
417 
418 	if (of_property_read_u32(np, "cache-line-size", &data->line_size) ||
419 	    !is_power_of_2(data->line_size)) {
420 		pr_err("L%d: cache-line-size is unspecified or invalid\n",
421 		       *cache_level);
422 		ret = -EINVAL;
423 		goto err;
424 	}
425 
426 	if (of_property_read_u32(np, "cache-sets", &data->nsets) ||
427 	    !is_power_of_2(data->nsets)) {
428 		pr_err("L%d: cache-sets is unspecified or invalid\n",
429 		       *cache_level);
430 		ret = -EINVAL;
431 		goto err;
432 	}
433 
434 	if (of_property_read_u32(np, "cache-size", &cache_size) ||
435 	    cache_size == 0 || cache_size % (data->nsets * data->line_size)) {
436 		pr_err("L%d: cache-size is unspecified or invalid\n",
437 		       *cache_level);
438 		ret = -EINVAL;
439 		goto err;
440 	}
441 
442 	data->way_present_mask =
443 		((u32)1 << cache_size / data->nsets / data->line_size) - 1;
444 
445 	data->ctrl_base = of_iomap(np, 0);
446 	if (!data->ctrl_base) {
447 		pr_err("L%d: failed to map control register\n", *cache_level);
448 		ret = -ENOMEM;
449 		goto err;
450 	}
451 
452 	data->rev_base = of_iomap(np, 1);
453 	if (!data->rev_base) {
454 		pr_err("L%d: failed to map revision register\n", *cache_level);
455 		ret = -ENOMEM;
456 		goto err;
457 	}
458 
459 	data->op_base = of_iomap(np, 2);
460 	if (!data->op_base) {
461 		pr_err("L%d: failed to map operation register\n", *cache_level);
462 		ret = -ENOMEM;
463 		goto err;
464 	}
465 
466 	data->way_ctrl_base = data->ctrl_base + 0xc00;
467 
468 	if (*cache_level == 2) {
469 		u32 revision = readl(data->rev_base + UNIPHIER_SSCID);
470 		/*
471 		 * The size of range operation is limited to (1 << 22) or less
472 		 * for PH-sLD8 or older SoCs.
473 		 */
474 		if (revision <= 0x16)
475 			data->range_op_max_size = (u32)1 << 22;
476 
477 		/*
478 		 * Unfortunatly, the offset address of active way control base
479 		 * varies from SoC to SoC.
480 		 */
481 		switch (revision) {
482 		case 0x11:	/* sLD3 */
483 			data->way_ctrl_base = data->ctrl_base + 0x870;
484 			break;
485 		case 0x12:	/* LD4 */
486 		case 0x16:	/* sld8 */
487 			data->way_ctrl_base = data->ctrl_base + 0x840;
488 			break;
489 		default:
490 			break;
491 		}
492 	}
493 
494 	data->range_op_max_size -= data->line_size;
495 
496 	INIT_LIST_HEAD(&data->list);
497 	list_add_tail(&data->list, &uniphier_cache_list); /* no mutex */
498 
499 	/*
500 	 * OK, this level has been successfully initialized.  Look for the next
501 	 * level cache.  Do not roll back even if the initialization of the
502 	 * next level cache fails because we want to continue with available
503 	 * cache levels.
504 	 */
505 	next_np = of_find_next_cache_node(np);
506 	if (next_np) {
507 		(*cache_level)++;
508 		ret = __uniphier_cache_init(next_np, cache_level);
509 	}
510 	of_node_put(next_np);
511 
512 	return ret;
513 err:
514 	iounmap(data->op_base);
515 	iounmap(data->rev_base);
516 	iounmap(data->ctrl_base);
517 	kfree(data);
518 
519 	return ret;
520 }
521 
522 int __init uniphier_cache_init(void)
523 {
524 	struct device_node *np = NULL;
525 	unsigned int cache_level;
526 	int ret = 0;
527 
528 	/* look for level 2 cache */
529 	while ((np = of_find_matching_node(np, uniphier_cache_match)))
530 		if (!of_property_read_u32(np, "cache-level", &cache_level) &&
531 		    cache_level == 2)
532 			break;
533 
534 	if (!np)
535 		return -ENODEV;
536 
537 	ret = __uniphier_cache_init(np, &cache_level);
538 	of_node_put(np);
539 
540 	if (ret) {
541 		/*
542 		 * Error out iif L2 initialization fails.  Continue with any
543 		 * error on L3 or outer because they are optional.
544 		 */
545 		if (cache_level == 2) {
546 			pr_err("failed to initialize L2 cache\n");
547 			return ret;
548 		}
549 
550 		cache_level--;
551 		ret = 0;
552 	}
553 
554 	outer_cache.inv_range = uniphier_cache_inv_range;
555 	outer_cache.clean_range = uniphier_cache_clean_range;
556 	outer_cache.flush_range = uniphier_cache_flush_range;
557 	outer_cache.flush_all = uniphier_cache_flush_all;
558 	outer_cache.disable = uniphier_cache_disable;
559 	outer_cache.sync = uniphier_cache_sync;
560 
561 	uniphier_cache_enable();
562 
563 	pr_info("enabled outer cache (cache level: %d)\n", cache_level);
564 
565 	return ret;
566 }
567