1/* SPDX-License-Identifier: GPL-2.0-only */
2/*
3 * Copyright (c) 2012, NVIDIA Corporation. All rights reserved.
4 */
5
6#include <linux/init.h>
7#include <linux/linkage.h>
8
9#include <soc/tegra/flowctrl.h>
10#include <soc/tegra/fuse.h>
11
12#include <asm/assembler.h>
13#include <asm/asm-offsets.h>
14#include <asm/cache.h>
15
16#include "iomap.h"
17#include "reset.h"
18#include "sleep.h"
19
20#define PMC_SCRATCH41	0x140
21
22#ifdef CONFIG_PM_SLEEP
23/*
24 *	tegra_resume
25 *
26 *	  CPU boot vector when restarting the a CPU following
27 *	  an LP2 transition. Also branched to by LP0 and LP1 resume after
28 *	  re-enabling sdram.
29 *
30 *	r6: SoC ID
31 *	r8: CPU part number
32 */
33ENTRY(tegra_resume)
34	check_cpu_part_num 0xc09, r8, r9
35	bleq	v7_invalidate_l1
36
37	cpu_id	r0
38	cmp	r0, #0				@ CPU0?
39 THUMB(	it	ne )
40	bne	cpu_resume			@ no
41
42	tegra_get_soc_id TEGRA_APB_MISC_BASE, r6
43	/* Are we on Tegra20? */
44	cmp	r6, #TEGRA20
45	beq	1f				@ Yes
46	/* Clear the flow controller flags for this CPU. */
47	cpu_to_csr_reg r3, r0
48	mov32	r2, TEGRA_FLOW_CTRL_BASE
49	ldr	r1, [r2, r3]
50	/* Clear event & intr flag */
51	orr	r1, r1, \
52		#FLOW_CTRL_CSR_INTR_FLAG | FLOW_CTRL_CSR_EVENT_FLAG
53	movw	r0, #0x3FFD	@ enable, cluster_switch, immed, bitmaps
54				@ & ext flags for CPU power mgnt
55	bic	r1, r1, r0
56	str	r1, [r2, r3]
571:
58
59	mov32	r9, 0xc09
60	cmp	r8, r9
61	bne	end_ca9_scu_l2_resume
62#ifdef CONFIG_HAVE_ARM_SCU
63	/* enable SCU */
64	mov32	r0, TEGRA_ARM_PERIF_BASE
65	ldr	r1, [r0]
66	orr	r1, r1, #1
67	str	r1, [r0]
68#endif
69	bl	tegra_resume_trusted_foundations
70
71#ifdef CONFIG_CACHE_L2X0
72	/* L2 cache resume & re-enable */
73	bl	l2c310_early_resume
74#endif
75end_ca9_scu_l2_resume:
76	mov32	r9, 0xc0f
77	cmp	r8, r9
78	bleq	tegra_init_l2_for_a15
79
80	b	cpu_resume
81ENDPROC(tegra_resume)
82
83/*
84 *	tegra_resume_trusted_foundations
85 *
86 *	  Trusted Foundations firmware initialization.
87 *
88 *	Doesn't return if firmware presents.
89 *	Corrupted registers: r1, r2
90 */
91ENTRY(tegra_resume_trusted_foundations)
92	/* Check whether Trusted Foundations firmware presents. */
93	mov32	r2, TEGRA_IRAM_BASE + TEGRA_IRAM_RESET_HANDLER_OFFSET
94	ldr	r1, =__tegra_cpu_reset_handler_data_offset + \
95							RESET_DATA(TF_PRESENT)
96	ldr	r1, [r2, r1]
97	cmp	r1, #0
98	reteq	lr
99
100 .arch_extension sec
101	/* First call after suspend wakes firmware. No arguments required. */
102	smc	#0
103
104	b	cpu_resume
105ENDPROC(tegra_resume_trusted_foundations)
106#endif
107
108	.align L1_CACHE_SHIFT
109ENTRY(__tegra_cpu_reset_handler_start)
110
111/*
112 * __tegra_cpu_reset_handler:
113 *
114 * Common handler for all CPU reset events.
115 *
116 * Register usage within the reset handler:
117 *
118 *      Others: scratch
119 *      R6  = SoC ID
120 *      R7  = CPU present (to the OS) mask
121 *      R8  = CPU in LP1 state mask
122 *      R9  = CPU in LP2 state mask
123 *      R10 = CPU number
124 *      R11 = CPU mask
125 *      R12 = pointer to reset handler data
126 *
127 * NOTE: This code is copied to IRAM. All code and data accesses
128 *       must be position-independent.
129 */
130
131	.arm
132	.align L1_CACHE_SHIFT
133ENTRY(__tegra_cpu_reset_handler)
134
135	cpsid	aif, 0x13			@ SVC mode, interrupts disabled
136
137	tegra_get_soc_id TEGRA_APB_MISC_BASE, r6
138
139	adr	r12, __tegra_cpu_reset_handler_data
140	ldr	r5, [r12, #RESET_DATA(TF_PRESENT)]
141	cmp	r5, #0
142	bne	after_errata
143
144#ifdef CONFIG_ARCH_TEGRA_2x_SOC
145t20_check:
146	cmp	r6, #TEGRA20
147	bne	after_t20_check
148t20_errata:
149	# Tegra20 is a Cortex-A9 r1p1
150	mrc	p15, 0, r0, c1, c0, 0   @ read system control register
151	orr	r0, r0, #1 << 14        @ erratum 716044
152	mcr	p15, 0, r0, c1, c0, 0   @ write system control register
153	mrc	p15, 0, r0, c15, c0, 1  @ read diagnostic register
154	orr	r0, r0, #1 << 4         @ erratum 742230
155	orr	r0, r0, #1 << 11        @ erratum 751472
156	mcr	p15, 0, r0, c15, c0, 1  @ write diagnostic register
157	b	after_errata
158after_t20_check:
159#endif
160#ifdef CONFIG_ARCH_TEGRA_3x_SOC
161t30_check:
162	cmp	r6, #TEGRA30
163	bne	after_t30_check
164t30_errata:
165	# Tegra30 is a Cortex-A9 r2p9
166	mrc	p15, 0, r0, c15, c0, 1  @ read diagnostic register
167	orr	r0, r0, #1 << 6         @ erratum 743622
168	orr	r0, r0, #1 << 11        @ erratum 751472
169	mcr	p15, 0, r0, c15, c0, 1  @ write diagnostic register
170	b	after_errata
171after_t30_check:
172#endif
173after_errata:
174	mrc	p15, 0, r10, c0, c0, 5		@ MPIDR
175	and	r10, r10, #0x3			@ R10 = CPU number
176	mov	r11, #1
177	mov	r11, r11, lsl r10  		@ R11 = CPU mask
178
179#ifdef CONFIG_SMP
180	/* Does the OS know about this CPU? */
181	ldr	r7, [r12, #RESET_DATA(MASK_PRESENT)]
182	tst	r7, r11 			@ if !present
183	bleq	__die				@ CPU not present (to OS)
184#endif
185
186#ifdef CONFIG_ARCH_TEGRA_2x_SOC
187	/* Are we on Tegra20? */
188	cmp	r6, #TEGRA20
189	bne	1f
190	/* If not CPU0, don't let CPU0 reset CPU1 now that CPU1 is coming up. */
191	mov	r0, #CPU_NOT_RESETTABLE
192	cmp	r10, #0
193	strbne	r0, [r12, #RESET_DATA(RESETTABLE_STATUS)]
1941:
195#endif
196
197	/* Waking up from LP1? */
198	ldr	r8, [r12, #RESET_DATA(MASK_LP1)]
199	tst	r8, r11				@ if in_lp1
200	beq	__is_not_lp1
201	cmp	r10, #0
202	bne	__die				@ only CPU0 can be here
203	ldr	lr, [r12, #RESET_DATA(STARTUP_LP1)]
204	cmp	lr, #0
205	bleq	__die				@ no LP1 startup handler
206 THUMB(	add	lr, lr, #1 )			@ switch to Thumb mode
207	bx	lr
208__is_not_lp1:
209
210	/* Waking up from LP2? */
211	ldr	r9, [r12, #RESET_DATA(MASK_LP2)]
212	tst	r9, r11				@ if in_lp2
213	beq	__is_not_lp2
214	ldr	lr, [r12, #RESET_DATA(STARTUP_LP2)]
215	cmp	lr, #0
216	bleq	__die				@ no LP2 startup handler
217	bx	lr
218
219__is_not_lp2:
220
221#ifdef CONFIG_SMP
222	/*
223	 * Can only be secondary boot (initial or hotplug)
224	 * CPU0 can't be here for Tegra20/30
225	 */
226	cmp	r6, #TEGRA114
227	beq	__no_cpu0_chk
228	cmp	r10, #0
229	bleq	__die				@ CPU0 cannot be here
230__no_cpu0_chk:
231	ldr	lr, [r12, #RESET_DATA(STARTUP_SECONDARY)]
232	cmp	lr, #0
233	bleq	__die				@ no secondary startup handler
234	bx	lr
235#endif
236
237/*
238 * We don't know why the CPU reset. Just kill it.
239 * The LR register will contain the address we died at + 4.
240 */
241
242__die:
243	sub	lr, lr, #4
244	mov32	r7, TEGRA_PMC_BASE
245	str	lr, [r7, #PMC_SCRATCH41]
246
247	mov32	r7, TEGRA_CLK_RESET_BASE
248
249	/* Are we on Tegra20? */
250	cmp	r6, #TEGRA20
251	bne	1f
252
253#ifdef CONFIG_ARCH_TEGRA_2x_SOC
254	mov32	r0, 0x1111
255	mov	r1, r0, lsl r10
256	str	r1, [r7, #0x340]		@ CLK_RST_CPU_CMPLX_SET
257#endif
2581:
259#ifdef CONFIG_ARCH_TEGRA_3x_SOC
260	mov32	r6, TEGRA_FLOW_CTRL_BASE
261
262	cmp	r10, #0
263	moveq	r1, #FLOW_CTRL_HALT_CPU0_EVENTS
264	moveq	r2, #FLOW_CTRL_CPU0_CSR
265	movne	r1, r10, lsl #3
266	addne	r2, r1, #(FLOW_CTRL_CPU1_CSR-8)
267	addne	r1, r1, #(FLOW_CTRL_HALT_CPU1_EVENTS-8)
268
269	/* Clear CPU "event" and "interrupt" flags and power gate
270	   it when halting but not before it is in the "WFI" state. */
271	ldr	r0, [r6, +r2]
272	orr	r0, r0, #FLOW_CTRL_CSR_INTR_FLAG | FLOW_CTRL_CSR_EVENT_FLAG
273	orr	r0, r0, #FLOW_CTRL_CSR_ENABLE
274	str	r0, [r6, +r2]
275
276	/* Unconditionally halt this CPU */
277	mov	r0, #FLOW_CTRL_WAITEVENT
278	str	r0, [r6, +r1]
279	ldr	r0, [r6, +r1]			@ memory barrier
280
281	dsb
282	isb
283	wfi					@ CPU should be power gated here
284
285	/* If the CPU didn't power gate above just kill it's clock. */
286
287	mov	r0, r11, lsl #8
288	str	r0, [r7, #348]			@ CLK_CPU_CMPLX_SET
289#endif
290
291	/* If the CPU still isn't dead, just spin here. */
292	b	.
293ENDPROC(__tegra_cpu_reset_handler)
294
295	.align L1_CACHE_SHIFT
296	.type	__tegra_cpu_reset_handler_data, %object
297	.globl	__tegra_cpu_reset_handler_data
298	.globl	__tegra_cpu_reset_handler_data_offset
299	.equ	__tegra_cpu_reset_handler_data_offset, \
300					. - __tegra_cpu_reset_handler_start
301__tegra_cpu_reset_handler_data:
302	.rept   TEGRA_RESET_DATA_SIZE
303	.long   0
304	.endr
305	.align L1_CACHE_SHIFT
306
307ENTRY(__tegra_cpu_reset_handler_end)
308