1/*
2 * Copyright (c) 2012, NVIDIA Corporation. All rights reserved.
3 *
4 * This program is free software; you can redistribute it and/or modify it
5 * under the terms and conditions of the GNU General Public License,
6 * version 2, as published by the Free Software Foundation.
7 *
8 * This program is distributed in the hope it will be useful, but WITHOUT
9 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
10 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
11 * more details.
12 *
13 * You should have received a copy of the GNU General Public License
14 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
15 */
16
17#include <linux/init.h>
18#include <linux/linkage.h>
19
20#include <soc/tegra/flowctrl.h>
21#include <soc/tegra/fuse.h>
22
23#include <asm/asm-offsets.h>
24#include <asm/cache.h>
25
26#include "iomap.h"
27#include "reset.h"
28#include "sleep.h"
29
30#define PMC_SCRATCH41	0x140
31
32#define RESET_DATA(x)	((TEGRA_RESET_##x)*4)
33
34#ifdef CONFIG_PM_SLEEP
35/*
36 *	tegra_resume
37 *
38 *	  CPU boot vector when restarting the a CPU following
39 *	  an LP2 transition. Also branched to by LP0 and LP1 resume after
40 *	  re-enabling sdram.
41 *
42 *	r6: SoC ID
43 *	r8: CPU part number
44 */
45ENTRY(tegra_resume)
46	check_cpu_part_num 0xc09, r8, r9
47	bleq	v7_invalidate_l1
48
49	cpu_id	r0
50	cmp	r0, #0				@ CPU0?
51 THUMB(	it	ne )
52	bne	cpu_resume			@ no
53
54	tegra_get_soc_id TEGRA_APB_MISC_BASE, r6
55	/* Are we on Tegra20? */
56	cmp	r6, #TEGRA20
57	beq	1f				@ Yes
58	/* Clear the flow controller flags for this CPU. */
59	cpu_to_csr_reg r1, r0
60	mov32	r2, TEGRA_FLOW_CTRL_BASE
61	ldr	r1, [r2, r1]
62	/* Clear event & intr flag */
63	orr	r1, r1, \
64		#FLOW_CTRL_CSR_INTR_FLAG | FLOW_CTRL_CSR_EVENT_FLAG
65	movw	r0, #0x3FFD	@ enable, cluster_switch, immed, bitmaps
66				@ & ext flags for CPU power mgnt
67	bic	r1, r1, r0
68	str	r1, [r2]
691:
70
71	mov32	r9, 0xc09
72	cmp	r8, r9
73	bne	end_ca9_scu_l2_resume
74#ifdef CONFIG_HAVE_ARM_SCU
75	/* enable SCU */
76	mov32	r0, TEGRA_ARM_PERIF_BASE
77	ldr	r1, [r0]
78	orr	r1, r1, #1
79	str	r1, [r0]
80#endif
81
82#ifdef CONFIG_CACHE_L2X0
83	/* L2 cache resume & re-enable */
84	bl	l2c310_early_resume
85#endif
86end_ca9_scu_l2_resume:
87	mov32	r9, 0xc0f
88	cmp	r8, r9
89	bleq	tegra_init_l2_for_a15
90
91	b	cpu_resume
92ENDPROC(tegra_resume)
93#endif
94
95	.align L1_CACHE_SHIFT
96ENTRY(__tegra_cpu_reset_handler_start)
97
98/*
99 * __tegra_cpu_reset_handler:
100 *
101 * Common handler for all CPU reset events.
102 *
103 * Register usage within the reset handler:
104 *
105 *      Others: scratch
106 *      R6  = SoC ID
107 *      R7  = CPU present (to the OS) mask
108 *      R8  = CPU in LP1 state mask
109 *      R9  = CPU in LP2 state mask
110 *      R10 = CPU number
111 *      R11 = CPU mask
112 *      R12 = pointer to reset handler data
113 *
114 * NOTE: This code is copied to IRAM. All code and data accesses
115 *       must be position-independent.
116 */
117
118	.align L1_CACHE_SHIFT
119ENTRY(__tegra_cpu_reset_handler)
120
121	cpsid	aif, 0x13			@ SVC mode, interrupts disabled
122
123	tegra_get_soc_id TEGRA_APB_MISC_BASE, r6
124#ifdef CONFIG_ARCH_TEGRA_2x_SOC
125t20_check:
126	cmp	r6, #TEGRA20
127	bne	after_t20_check
128t20_errata:
129	# Tegra20 is a Cortex-A9 r1p1
130	mrc	p15, 0, r0, c1, c0, 0   @ read system control register
131	orr	r0, r0, #1 << 14        @ erratum 716044
132	mcr	p15, 0, r0, c1, c0, 0   @ write system control register
133	mrc	p15, 0, r0, c15, c0, 1  @ read diagnostic register
134	orr	r0, r0, #1 << 4         @ erratum 742230
135	orr	r0, r0, #1 << 11        @ erratum 751472
136	mcr	p15, 0, r0, c15, c0, 1  @ write diagnostic register
137	b	after_errata
138after_t20_check:
139#endif
140#ifdef CONFIG_ARCH_TEGRA_3x_SOC
141t30_check:
142	cmp	r6, #TEGRA30
143	bne	after_t30_check
144t30_errata:
145	# Tegra30 is a Cortex-A9 r2p9
146	mrc	p15, 0, r0, c15, c0, 1  @ read diagnostic register
147	orr	r0, r0, #1 << 6         @ erratum 743622
148	orr	r0, r0, #1 << 11        @ erratum 751472
149	mcr	p15, 0, r0, c15, c0, 1  @ write diagnostic register
150	b	after_errata
151after_t30_check:
152#endif
153after_errata:
154	mrc	p15, 0, r10, c0, c0, 5		@ MPIDR
155	and	r10, r10, #0x3			@ R10 = CPU number
156	mov	r11, #1
157	mov	r11, r11, lsl r10  		@ R11 = CPU mask
158	adr	r12, __tegra_cpu_reset_handler_data
159
160#ifdef CONFIG_SMP
161	/* Does the OS know about this CPU? */
162	ldr	r7, [r12, #RESET_DATA(MASK_PRESENT)]
163	tst	r7, r11 			@ if !present
164	bleq	__die				@ CPU not present (to OS)
165#endif
166
167#ifdef CONFIG_ARCH_TEGRA_2x_SOC
168	/* Are we on Tegra20? */
169	cmp	r6, #TEGRA20
170	bne	1f
171	/* If not CPU0, don't let CPU0 reset CPU1 now that CPU1 is coming up. */
172	mov32	r5, TEGRA_IRAM_BASE + TEGRA_IRAM_RESET_HANDLER_OFFSET
173	mov	r0, #CPU_NOT_RESETTABLE
174	cmp	r10, #0
175	strbne	r0, [r5, #__tegra20_cpu1_resettable_status_offset]
1761:
177#endif
178
179	/* Waking up from LP1? */
180	ldr	r8, [r12, #RESET_DATA(MASK_LP1)]
181	tst	r8, r11				@ if in_lp1
182	beq	__is_not_lp1
183	cmp	r10, #0
184	bne	__die				@ only CPU0 can be here
185	ldr	lr, [r12, #RESET_DATA(STARTUP_LP1)]
186	cmp	lr, #0
187	bleq	__die				@ no LP1 startup handler
188 THUMB(	add	lr, lr, #1 )			@ switch to Thumb mode
189	bx	lr
190__is_not_lp1:
191
192	/* Waking up from LP2? */
193	ldr	r9, [r12, #RESET_DATA(MASK_LP2)]
194	tst	r9, r11				@ if in_lp2
195	beq	__is_not_lp2
196	ldr	lr, [r12, #RESET_DATA(STARTUP_LP2)]
197	cmp	lr, #0
198	bleq	__die				@ no LP2 startup handler
199	bx	lr
200
201__is_not_lp2:
202
203#ifdef CONFIG_SMP
204	/*
205	 * Can only be secondary boot (initial or hotplug)
206	 * CPU0 can't be here for Tegra20/30
207	 */
208	cmp	r6, #TEGRA114
209	beq	__no_cpu0_chk
210	cmp	r10, #0
211	bleq	__die				@ CPU0 cannot be here
212__no_cpu0_chk:
213	ldr	lr, [r12, #RESET_DATA(STARTUP_SECONDARY)]
214	cmp	lr, #0
215	bleq	__die				@ no secondary startup handler
216	bx	lr
217#endif
218
219/*
220 * We don't know why the CPU reset. Just kill it.
221 * The LR register will contain the address we died at + 4.
222 */
223
224__die:
225	sub	lr, lr, #4
226	mov32	r7, TEGRA_PMC_BASE
227	str	lr, [r7, #PMC_SCRATCH41]
228
229	mov32	r7, TEGRA_CLK_RESET_BASE
230
231	/* Are we on Tegra20? */
232	cmp	r6, #TEGRA20
233	bne	1f
234
235#ifdef CONFIG_ARCH_TEGRA_2x_SOC
236	mov32	r0, 0x1111
237	mov	r1, r0, lsl r10
238	str	r1, [r7, #0x340]		@ CLK_RST_CPU_CMPLX_SET
239#endif
2401:
241#ifdef CONFIG_ARCH_TEGRA_3x_SOC
242	mov32	r6, TEGRA_FLOW_CTRL_BASE
243
244	cmp	r10, #0
245	moveq	r1, #FLOW_CTRL_HALT_CPU0_EVENTS
246	moveq	r2, #FLOW_CTRL_CPU0_CSR
247	movne	r1, r10, lsl #3
248	addne	r2, r1, #(FLOW_CTRL_CPU1_CSR-8)
249	addne	r1, r1, #(FLOW_CTRL_HALT_CPU1_EVENTS-8)
250
251	/* Clear CPU "event" and "interrupt" flags and power gate
252	   it when halting but not before it is in the "WFI" state. */
253	ldr	r0, [r6, +r2]
254	orr	r0, r0, #FLOW_CTRL_CSR_INTR_FLAG | FLOW_CTRL_CSR_EVENT_FLAG
255	orr	r0, r0, #FLOW_CTRL_CSR_ENABLE
256	str	r0, [r6, +r2]
257
258	/* Unconditionally halt this CPU */
259	mov	r0, #FLOW_CTRL_WAITEVENT
260	str	r0, [r6, +r1]
261	ldr	r0, [r6, +r1]			@ memory barrier
262
263	dsb
264	isb
265	wfi					@ CPU should be power gated here
266
267	/* If the CPU didn't power gate above just kill it's clock. */
268
269	mov	r0, r11, lsl #8
270	str	r0, [r7, #348]			@ CLK_CPU_CMPLX_SET
271#endif
272
273	/* If the CPU still isn't dead, just spin here. */
274	b	.
275ENDPROC(__tegra_cpu_reset_handler)
276
277	.align L1_CACHE_SHIFT
278	.type	__tegra_cpu_reset_handler_data, %object
279	.globl	__tegra_cpu_reset_handler_data
280__tegra_cpu_reset_handler_data:
281	.rept	TEGRA_RESET_DATA_SIZE
282	.long	0
283	.endr
284	.globl	__tegra20_cpu1_resettable_status_offset
285	.equ	__tegra20_cpu1_resettable_status_offset, \
286					. - __tegra_cpu_reset_handler_start
287	.byte	0
288	.align L1_CACHE_SHIFT
289
290ENTRY(__tegra_cpu_reset_handler_end)
291