xref: /openbmc/linux/arch/arm/mach-tegra/board-paz00.c (revision d1890d4d)

/*
 * arch/arm/mach-tegra/board-paz00.c
 *
 * Copyright (C) 2011 Marc Dietrich <marvin24@gmx.de>
 *
 * Based on board-harmony.c
 * Copyright (C) 2010 Google, Inc.
 *
 * This software is licensed under the terms of the GNU General Public
 * License version 2, as published by the Free Software Foundation, and
 * may be copied, distributed, and modified under those terms.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 */

#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/serial_8250.h>
#include <linux/clk.h>
#include <linux/dma-mapping.h>
#include <linux/pda_power.h>
#include <linux/io.h>
#include <linux/i2c.h>
#include <linux/i2c-tegra.h>
#include <linux/platform_data/tegra_usb.h>

#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <asm/setup.h>

#include <mach/iomap.h>
#include <mach/irqs.h>
#include <mach/sdhci.h>
#include <mach/usb_phy.h>
#include <mach/gpio.h>

#include "board.h"
#include "board-paz00.h"
#include "clock.h"
#include "devices.h"
#include "gpio-names.h"

static struct plat_serial8250_port debug_uart_platform_data[] = {
	{
		.membase	= IO_ADDRESS(TEGRA_UARTD_BASE),
		.mapbase	= TEGRA_UARTD_BASE,
		.irq		= INT_UARTD,
		.flags		= UPF_BOOT_AUTOCONF,
		.iotype		= UPIO_MEM,
		.regshift	= 2,
		.uartclk	= 216000000,
	}, {
		.flags		= 0
	}
};

static struct platform_device debug_uart = {
	.name = "serial8250",
	.id = PLAT8250_DEV_PLATFORM,
	.dev = {
		.platform_data = debug_uart_platform_data,
	},
};

static struct platform_device *paz00_devices[] __initdata = {
	&debug_uart,
	&tegra_sdhci_device1,
	&tegra_sdhci_device4,
};

static struct tegra_i2c_platform_data paz00_i2c1_platform_data = {
	.bus_clk_rate   = 400000,
};

static struct tegra_i2c_platform_data paz00_i2c2_platform_data = {
	.bus_clk_rate   = 400000,
};

static struct tegra_i2c_platform_data paz00_dvc_platform_data = {
	.bus_clk_rate   = 400000,
};

static void paz00_i2c_init(void)
{
	tegra_i2c_device1.dev.platform_data = &paz00_i2c1_platform_data;
	tegra_i2c_device2.dev.platform_data = &paz00_i2c2_platform_data;
	tegra_i2c_device4.dev.platform_data = &paz00_dvc_platform_data;

	platform_device_register(&tegra_i2c_device1);
	platform_device_register(&tegra_i2c_device2);
	platform_device_register(&tegra_i2c_device4);
}

static struct tegra_ulpi_config ulpi_phy_config = {
		.reset_gpio = TEGRA_ULPI_RST,
		.clk = "cdev2",
};

static struct tegra_ehci_platform_data tegra_ehci_pdata[] = {
		[0] = {
			.operating_mode = TEGRA_USB_OTG,
			.power_down_on_bus_suspend = 1,
		},
		[1] = {
			.phy_config = &ulpi_phy_config,
			.operating_mode = TEGRA_USB_HOST,
			.power_down_on_bus_suspend = 1,
		},
		[2] = {
			.operating_mode = TEGRA_USB_HOST,
			.power_down_on_bus_suspend = 1,
		},
};

static void paz00_usb_init(void)
{
	tegra_ehci2_device.dev.platform_data = &tegra_ehci_pdata[1];
	tegra_ehci3_device.dev.platform_data = &tegra_ehci_pdata[2];

	platform_device_register(&tegra_ehci2_device);
	platform_device_register(&tegra_ehci3_device);
}

static void __init tegra_paz00_fixup(struct machine_desc *desc,
	struct tag *tags, char **cmdline, struct meminfo *mi)
{
	mi->nr_banks = 1;
	mi->bank[0].start = PHYS_OFFSET;
	mi->bank[0].size = 448 * SZ_1M;
}

static __initdata struct tegra_clk_init_table paz00_clk_init_table[] = {
	/* name		parent		rate		enabled */
	{ "uartd",	"pll_p",	216000000,	true },
	{ NULL,		NULL,		0,		0},
};

static struct tegra_sdhci_platform_data sdhci_pdata1 = {
	.cd_gpio	= TEGRA_GPIO_SD1_CD,
	.wp_gpio	= TEGRA_GPIO_SD1_WP,
	.power_gpio	= TEGRA_GPIO_SD1_POWER,
};

static struct tegra_sdhci_platform_data sdhci_pdata4 = {
	.cd_gpio	= -1,
	.wp_gpio	= -1,
	.power_gpio	= -1,
	.is_8bit	= 1,
};

static void __init tegra_paz00_init(void)
{
	tegra_clk_init_from_table(paz00_clk_init_table);

	paz00_pinmux_init();

	tegra_sdhci_device1.dev.platform_data = &sdhci_pdata1;
	tegra_sdhci_device4.dev.platform_data = &sdhci_pdata4;

	platform_add_devices(paz00_devices, ARRAY_SIZE(paz00_devices));

	paz00_i2c_init();
	paz00_usb_init();
}

MACHINE_START(PAZ00, "Toshiba AC100 / Dynabook AZ")
	.boot_params	= 0x00000100,
	.fixup		= tegra_paz00_fixup,
	.map_io         = tegra_map_common_io,
	.init_early	= tegra_init_early,
	.init_irq       = tegra_init_irq,
	.timer          = &tegra_timer,
	.init_machine   = tegra_paz00_init,
MACHINE_END