1 /* 2 * arch/arm/plat-spear/time.c 3 * 4 * Copyright (C) 2010 ST Microelectronics 5 * Shiraz Hashim<shiraz.linux.kernel@gmail.com> 6 * 7 * This file is licensed under the terms of the GNU General Public 8 * License version 2. This program is licensed "as is" without any 9 * warranty of any kind, whether express or implied. 10 */ 11 12 #include <linux/clk.h> 13 #include <linux/clockchips.h> 14 #include <linux/clocksource.h> 15 #include <linux/err.h> 16 #include <linux/init.h> 17 #include <linux/interrupt.h> 18 #include <linux/ioport.h> 19 #include <linux/io.h> 20 #include <linux/kernel.h> 21 #include <linux/of_irq.h> 22 #include <linux/of_address.h> 23 #include <linux/time.h> 24 #include <linux/irq.h> 25 #include <asm/mach/time.h> 26 #include "generic.h" 27 28 /* 29 * We would use TIMER0 and TIMER1 as clockevent and clocksource. 30 * Timer0 and Timer1 both belong to same gpt block in cpu subbsystem. Further 31 * they share same functional clock. Any change in one's functional clock will 32 * also affect other timer. 33 */ 34 35 #define CLKEVT 0 /* gpt0, channel0 as clockevent */ 36 #define CLKSRC 1 /* gpt0, channel1 as clocksource */ 37 38 /* Register offsets, x is channel number */ 39 #define CR(x) ((x) * 0x80 + 0x80) 40 #define IR(x) ((x) * 0x80 + 0x84) 41 #define LOAD(x) ((x) * 0x80 + 0x88) 42 #define COUNT(x) ((x) * 0x80 + 0x8C) 43 44 /* Reg bit definitions */ 45 #define CTRL_INT_ENABLE 0x0100 46 #define CTRL_ENABLE 0x0020 47 #define CTRL_ONE_SHOT 0x0010 48 49 #define CTRL_PRESCALER1 0x0 50 #define CTRL_PRESCALER2 0x1 51 #define CTRL_PRESCALER4 0x2 52 #define CTRL_PRESCALER8 0x3 53 #define CTRL_PRESCALER16 0x4 54 #define CTRL_PRESCALER32 0x5 55 #define CTRL_PRESCALER64 0x6 56 #define CTRL_PRESCALER128 0x7 57 #define CTRL_PRESCALER256 0x8 58 59 #define INT_STATUS 0x1 60 61 /* 62 * Minimum clocksource/clockevent timer range in seconds 63 */ 64 #define SPEAR_MIN_RANGE 4 65 66 static __iomem void *gpt_base; 67 static struct clk *gpt_clk; 68 69 static int clockevent_next_event(unsigned long evt, 70 struct clock_event_device *clk_event_dev); 71 72 static void __init spear_clocksource_init(void) 73 { 74 u32 tick_rate; 75 u16 val; 76 77 /* program the prescaler (/256)*/ 78 writew(CTRL_PRESCALER256, gpt_base + CR(CLKSRC)); 79 80 /* find out actual clock driving Timer */ 81 tick_rate = clk_get_rate(gpt_clk); 82 tick_rate >>= CTRL_PRESCALER256; 83 84 writew(0xFFFF, gpt_base + LOAD(CLKSRC)); 85 86 val = readw(gpt_base + CR(CLKSRC)); 87 val &= ~CTRL_ONE_SHOT; /* autoreload mode */ 88 val |= CTRL_ENABLE ; 89 writew(val, gpt_base + CR(CLKSRC)); 90 91 /* register the clocksource */ 92 clocksource_mmio_init(gpt_base + COUNT(CLKSRC), "tmr1", tick_rate, 93 200, 16, clocksource_mmio_readw_up); 94 } 95 96 static inline void timer_shutdown(struct clock_event_device *evt) 97 { 98 u16 val = readw(gpt_base + CR(CLKEVT)); 99 100 /* stop the timer */ 101 val &= ~CTRL_ENABLE; 102 writew(val, gpt_base + CR(CLKEVT)); 103 } 104 105 static int spear_shutdown(struct clock_event_device *evt) 106 { 107 timer_shutdown(evt); 108 109 return 0; 110 } 111 112 static int spear_set_oneshot(struct clock_event_device *evt) 113 { 114 u16 val; 115 116 /* stop the timer */ 117 timer_shutdown(evt); 118 119 val = readw(gpt_base + CR(CLKEVT)); 120 val |= CTRL_ONE_SHOT; 121 writew(val, gpt_base + CR(CLKEVT)); 122 123 return 0; 124 } 125 126 static int spear_set_periodic(struct clock_event_device *evt) 127 { 128 u32 period; 129 u16 val; 130 131 /* stop the timer */ 132 timer_shutdown(evt); 133 134 period = clk_get_rate(gpt_clk) / HZ; 135 period >>= CTRL_PRESCALER16; 136 writew(period, gpt_base + LOAD(CLKEVT)); 137 138 val = readw(gpt_base + CR(CLKEVT)); 139 val &= ~CTRL_ONE_SHOT; 140 val |= CTRL_ENABLE | CTRL_INT_ENABLE; 141 writew(val, gpt_base + CR(CLKEVT)); 142 143 return 0; 144 } 145 146 static struct clock_event_device clkevt = { 147 .name = "tmr0", 148 .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, 149 .set_state_shutdown = spear_shutdown, 150 .set_state_periodic = spear_set_periodic, 151 .set_state_oneshot = spear_set_oneshot, 152 .tick_resume = spear_shutdown, 153 .set_next_event = clockevent_next_event, 154 .shift = 0, /* to be computed */ 155 }; 156 157 static int clockevent_next_event(unsigned long cycles, 158 struct clock_event_device *clk_event_dev) 159 { 160 u16 val = readw(gpt_base + CR(CLKEVT)); 161 162 if (val & CTRL_ENABLE) 163 writew(val & ~CTRL_ENABLE, gpt_base + CR(CLKEVT)); 164 165 writew(cycles, gpt_base + LOAD(CLKEVT)); 166 167 val |= CTRL_ENABLE | CTRL_INT_ENABLE; 168 writew(val, gpt_base + CR(CLKEVT)); 169 170 return 0; 171 } 172 173 static irqreturn_t spear_timer_interrupt(int irq, void *dev_id) 174 { 175 struct clock_event_device *evt = &clkevt; 176 177 writew(INT_STATUS, gpt_base + IR(CLKEVT)); 178 179 evt->event_handler(evt); 180 181 return IRQ_HANDLED; 182 } 183 184 static void __init spear_clockevent_init(int irq) 185 { 186 u32 tick_rate; 187 188 /* program the prescaler */ 189 writew(CTRL_PRESCALER16, gpt_base + CR(CLKEVT)); 190 191 tick_rate = clk_get_rate(gpt_clk); 192 tick_rate >>= CTRL_PRESCALER16; 193 194 clkevt.cpumask = cpumask_of(0); 195 196 clockevents_config_and_register(&clkevt, tick_rate, 3, 0xfff0); 197 198 if (request_irq(irq, spear_timer_interrupt, IRQF_TIMER, "timer", NULL)) 199 pr_err("Failed to request irq %d (timer)\n", irq); 200 } 201 202 static const struct of_device_id timer_of_match[] __initconst = { 203 { .compatible = "st,spear-timer", }, 204 { }, 205 }; 206 207 void __init spear_setup_of_timer(void) 208 { 209 struct device_node *np; 210 int irq, ret; 211 212 np = of_find_matching_node(NULL, timer_of_match); 213 if (!np) { 214 pr_err("%s: No timer passed via DT\n", __func__); 215 return; 216 } 217 218 irq = irq_of_parse_and_map(np, 0); 219 if (!irq) { 220 pr_err("%s: No irq passed for timer via DT\n", __func__); 221 return; 222 } 223 224 gpt_base = of_iomap(np, 0); 225 if (!gpt_base) { 226 pr_err("%s: of iomap failed\n", __func__); 227 return; 228 } 229 230 gpt_clk = clk_get_sys("gpt0", NULL); 231 if (IS_ERR(gpt_clk)) { 232 pr_err("%s:couldn't get clk for gpt\n", __func__); 233 goto err_iomap; 234 } 235 236 ret = clk_prepare_enable(gpt_clk); 237 if (ret < 0) { 238 pr_err("%s:couldn't prepare-enable gpt clock\n", __func__); 239 goto err_prepare_enable_clk; 240 } 241 242 spear_clockevent_init(irq); 243 spear_clocksource_init(); 244 245 return; 246 247 err_prepare_enable_clk: 248 clk_put(gpt_clk); 249 err_iomap: 250 iounmap(gpt_base); 251 } 252