1 /* 2 * arch/arm/plat-spear/time.c 3 * 4 * Copyright (C) 2010 ST Microelectronics 5 * Shiraz Hashim<shiraz.hashim@st.com> 6 * 7 * This file is licensed under the terms of the GNU General Public 8 * License version 2. This program is licensed "as is" without any 9 * warranty of any kind, whether express or implied. 10 */ 11 12 #include <linux/clk.h> 13 #include <linux/clockchips.h> 14 #include <linux/clocksource.h> 15 #include <linux/err.h> 16 #include <linux/init.h> 17 #include <linux/interrupt.h> 18 #include <linux/ioport.h> 19 #include <linux/io.h> 20 #include <linux/kernel.h> 21 #include <linux/of_irq.h> 22 #include <linux/of_address.h> 23 #include <linux/time.h> 24 #include <linux/irq.h> 25 #include <asm/mach/time.h> 26 #include "generic.h" 27 28 /* 29 * We would use TIMER0 and TIMER1 as clockevent and clocksource. 30 * Timer0 and Timer1 both belong to same gpt block in cpu subbsystem. Further 31 * they share same functional clock. Any change in one's functional clock will 32 * also affect other timer. 33 */ 34 35 #define CLKEVT 0 /* gpt0, channel0 as clockevent */ 36 #define CLKSRC 1 /* gpt0, channel1 as clocksource */ 37 38 /* Register offsets, x is channel number */ 39 #define CR(x) ((x) * 0x80 + 0x80) 40 #define IR(x) ((x) * 0x80 + 0x84) 41 #define LOAD(x) ((x) * 0x80 + 0x88) 42 #define COUNT(x) ((x) * 0x80 + 0x8C) 43 44 /* Reg bit definitions */ 45 #define CTRL_INT_ENABLE 0x0100 46 #define CTRL_ENABLE 0x0020 47 #define CTRL_ONE_SHOT 0x0010 48 49 #define CTRL_PRESCALER1 0x0 50 #define CTRL_PRESCALER2 0x1 51 #define CTRL_PRESCALER4 0x2 52 #define CTRL_PRESCALER8 0x3 53 #define CTRL_PRESCALER16 0x4 54 #define CTRL_PRESCALER32 0x5 55 #define CTRL_PRESCALER64 0x6 56 #define CTRL_PRESCALER128 0x7 57 #define CTRL_PRESCALER256 0x8 58 59 #define INT_STATUS 0x1 60 61 /* 62 * Minimum clocksource/clockevent timer range in seconds 63 */ 64 #define SPEAR_MIN_RANGE 4 65 66 static __iomem void *gpt_base; 67 static struct clk *gpt_clk; 68 69 static void clockevent_set_mode(enum clock_event_mode mode, 70 struct clock_event_device *clk_event_dev); 71 static int clockevent_next_event(unsigned long evt, 72 struct clock_event_device *clk_event_dev); 73 74 static void spear_clocksource_init(void) 75 { 76 u32 tick_rate; 77 u16 val; 78 79 /* program the prescaler (/256)*/ 80 writew(CTRL_PRESCALER256, gpt_base + CR(CLKSRC)); 81 82 /* find out actual clock driving Timer */ 83 tick_rate = clk_get_rate(gpt_clk); 84 tick_rate >>= CTRL_PRESCALER256; 85 86 writew(0xFFFF, gpt_base + LOAD(CLKSRC)); 87 88 val = readw(gpt_base + CR(CLKSRC)); 89 val &= ~CTRL_ONE_SHOT; /* autoreload mode */ 90 val |= CTRL_ENABLE ; 91 writew(val, gpt_base + CR(CLKSRC)); 92 93 /* register the clocksource */ 94 clocksource_mmio_init(gpt_base + COUNT(CLKSRC), "tmr1", tick_rate, 95 200, 16, clocksource_mmio_readw_up); 96 } 97 98 static struct clock_event_device clkevt = { 99 .name = "tmr0", 100 .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, 101 .set_mode = clockevent_set_mode, 102 .set_next_event = clockevent_next_event, 103 .shift = 0, /* to be computed */ 104 }; 105 106 static void clockevent_set_mode(enum clock_event_mode mode, 107 struct clock_event_device *clk_event_dev) 108 { 109 u32 period; 110 u16 val; 111 112 /* stop the timer */ 113 val = readw(gpt_base + CR(CLKEVT)); 114 val &= ~CTRL_ENABLE; 115 writew(val, gpt_base + CR(CLKEVT)); 116 117 switch (mode) { 118 case CLOCK_EVT_MODE_PERIODIC: 119 period = clk_get_rate(gpt_clk) / HZ; 120 period >>= CTRL_PRESCALER16; 121 writew(period, gpt_base + LOAD(CLKEVT)); 122 123 val = readw(gpt_base + CR(CLKEVT)); 124 val &= ~CTRL_ONE_SHOT; 125 val |= CTRL_ENABLE | CTRL_INT_ENABLE; 126 writew(val, gpt_base + CR(CLKEVT)); 127 128 break; 129 case CLOCK_EVT_MODE_ONESHOT: 130 val = readw(gpt_base + CR(CLKEVT)); 131 val |= CTRL_ONE_SHOT; 132 writew(val, gpt_base + CR(CLKEVT)); 133 134 break; 135 case CLOCK_EVT_MODE_UNUSED: 136 case CLOCK_EVT_MODE_SHUTDOWN: 137 case CLOCK_EVT_MODE_RESUME: 138 139 break; 140 default: 141 pr_err("Invalid mode requested\n"); 142 break; 143 } 144 } 145 146 static int clockevent_next_event(unsigned long cycles, 147 struct clock_event_device *clk_event_dev) 148 { 149 u16 val = readw(gpt_base + CR(CLKEVT)); 150 151 if (val & CTRL_ENABLE) 152 writew(val & ~CTRL_ENABLE, gpt_base + CR(CLKEVT)); 153 154 writew(cycles, gpt_base + LOAD(CLKEVT)); 155 156 val |= CTRL_ENABLE | CTRL_INT_ENABLE; 157 writew(val, gpt_base + CR(CLKEVT)); 158 159 return 0; 160 } 161 162 static irqreturn_t spear_timer_interrupt(int irq, void *dev_id) 163 { 164 struct clock_event_device *evt = &clkevt; 165 166 writew(INT_STATUS, gpt_base + IR(CLKEVT)); 167 168 evt->event_handler(evt); 169 170 return IRQ_HANDLED; 171 } 172 173 static struct irqaction spear_timer_irq = { 174 .name = "timer", 175 .flags = IRQF_DISABLED | IRQF_TIMER, 176 .handler = spear_timer_interrupt 177 }; 178 179 static void __init spear_clockevent_init(int irq) 180 { 181 u32 tick_rate; 182 183 /* program the prescaler */ 184 writew(CTRL_PRESCALER16, gpt_base + CR(CLKEVT)); 185 186 tick_rate = clk_get_rate(gpt_clk); 187 tick_rate >>= CTRL_PRESCALER16; 188 189 clkevt.cpumask = cpumask_of(0); 190 191 clockevents_config_and_register(&clkevt, tick_rate, 3, 0xfff0); 192 193 setup_irq(irq, &spear_timer_irq); 194 } 195 196 const static struct of_device_id timer_of_match[] __initconst = { 197 { .compatible = "st,spear-timer", }, 198 { }, 199 }; 200 201 void __init spear_setup_of_timer(void) 202 { 203 struct device_node *np; 204 int irq, ret; 205 206 np = of_find_matching_node(NULL, timer_of_match); 207 if (!np) { 208 pr_err("%s: No timer passed via DT\n", __func__); 209 return; 210 } 211 212 irq = irq_of_parse_and_map(np, 0); 213 if (!irq) { 214 pr_err("%s: No irq passed for timer via DT\n", __func__); 215 return; 216 } 217 218 gpt_base = of_iomap(np, 0); 219 if (!gpt_base) { 220 pr_err("%s: of iomap failed\n", __func__); 221 return; 222 } 223 224 gpt_clk = clk_get_sys("gpt0", NULL); 225 if (!gpt_clk) { 226 pr_err("%s:couldn't get clk for gpt\n", __func__); 227 goto err_iomap; 228 } 229 230 ret = clk_prepare_enable(gpt_clk); 231 if (ret < 0) { 232 pr_err("%s:couldn't prepare-enable gpt clock\n", __func__); 233 goto err_prepare_enable_clk; 234 } 235 236 spear_clockevent_init(irq); 237 spear_clocksource_init(); 238 239 return; 240 241 err_prepare_enable_clk: 242 clk_put(gpt_clk); 243 err_iomap: 244 iounmap(gpt_base); 245 } 246