1 /**
2  *  arch/arm/mac-sa1100/jornada720_ssp.c
3  *
4  *  Copyright (C) 2006/2007 Kristoffer Ericson <Kristoffer.Ericson@gmail.com>
5  *   Copyright (C) 2006 Filip Zyzniewski <filip.zyzniewski@tefnet.pl>
6  *
7  * This program is free software; you can redistribute it and/or modify
8  * it under the terms of the GNU General Public License version 2 as
9  * published by the Free Software Foundation.
10  *
11  *  SSP driver for the HP Jornada 710/720/728
12  */
13 
14 #include <linux/delay.h>
15 #include <linux/errno.h>
16 #include <linux/init.h>
17 #include <linux/kernel.h>
18 #include <linux/module.h>
19 #include <linux/platform_device.h>
20 #include <linux/sched.h>
21 #include <linux/io.h>
22 
23 #include <mach/hardware.h>
24 #include <mach/jornada720.h>
25 #include <asm/hardware/ssp.h>
26 
27 static DEFINE_SPINLOCK(jornada_ssp_lock);
28 static unsigned long jornada_ssp_flags;
29 
30 /**
31  * jornada_ssp_reverse - reverses input byte
32  *
33  * we need to reverse all data we receive from the mcu due to its physical location
34  * returns : 01110111 -> 11101110
35  */
36 inline u8 jornada_ssp_reverse(u8 byte)
37 {
38 	return
39 		((0x80 & byte) >> 7) |
40 		((0x40 & byte) >> 5) |
41 		((0x20 & byte) >> 3) |
42 		((0x10 & byte) >> 1) |
43 		((0x08 & byte) << 1) |
44 		((0x04 & byte) << 3) |
45 		((0x02 & byte) << 5) |
46 		((0x01 & byte) << 7);
47 };
48 EXPORT_SYMBOL(jornada_ssp_reverse);
49 
50 /**
51  * jornada_ssp_byte - waits for ready ssp bus and sends byte
52  *
53  * waits for fifo buffer to clear and then transmits, if it doesn't then we will
54  * timeout after <timeout> rounds. Needs mcu running before its called.
55  *
56  * returns : %mcu output on success
57  *	   : %-ETIMEDOUT on timeout
58  */
59 int jornada_ssp_byte(u8 byte)
60 {
61 	int timeout = 400000;
62 	u16 ret;
63 
64 	while ((GPLR & GPIO_GPIO10)) {
65 		if (!--timeout) {
66 			printk(KERN_WARNING "SSP: timeout while waiting for transmit\n");
67 			return -ETIMEDOUT;
68 		}
69 		cpu_relax();
70 	}
71 
72 	ret = jornada_ssp_reverse(byte) << 8;
73 
74 	ssp_write_word(ret);
75 	ssp_read_word(&ret);
76 
77 	return jornada_ssp_reverse(ret);
78 };
79 EXPORT_SYMBOL(jornada_ssp_byte);
80 
81 /**
82  * jornada_ssp_inout - decide if input is command or trading byte
83  *
84  * returns : (jornada_ssp_byte(byte)) on success
85  *         : %-ETIMEDOUT on timeout failure
86  */
87 int jornada_ssp_inout(u8 byte)
88 {
89 	int ret, i;
90 
91 	/* true means command byte */
92 	if (byte != TXDUMMY) {
93 		ret = jornada_ssp_byte(byte);
94 		/* Proper return to commands is TxDummy */
95 		if (ret != TXDUMMY) {
96 			for (i = 0; i < 256; i++)/* flushing bus */
97 				if (jornada_ssp_byte(TXDUMMY) == -1)
98 					break;
99 			return -ETIMEDOUT;
100 		}
101 	} else /* Exchange TxDummy for data */
102 		ret = jornada_ssp_byte(TXDUMMY);
103 
104 	return ret;
105 };
106 EXPORT_SYMBOL(jornada_ssp_inout);
107 
108 /**
109  * jornada_ssp_start - enable mcu
110  *
111  */
112 void jornada_ssp_start(void)
113 {
114 	spin_lock_irqsave(&jornada_ssp_lock, jornada_ssp_flags);
115 	GPCR = GPIO_GPIO25;
116 	udelay(50);
117 	return;
118 };
119 EXPORT_SYMBOL(jornada_ssp_start);
120 
121 /**
122  * jornada_ssp_end - disable mcu and turn off lock
123  *
124  */
125 void jornada_ssp_end(void)
126 {
127 	GPSR = GPIO_GPIO25;
128 	spin_unlock_irqrestore(&jornada_ssp_lock, jornada_ssp_flags);
129 	return;
130 };
131 EXPORT_SYMBOL(jornada_ssp_end);
132 
133 static int jornada_ssp_probe(struct platform_device *dev)
134 {
135 	int ret;
136 
137 	GPSR = GPIO_GPIO25;
138 
139 	ret = ssp_init();
140 
141 	/* worked fine, lets not bother with anything else */
142 	if (!ret) {
143 		printk(KERN_INFO "SSP: device initialized with irq\n");
144 		return ret;
145 	}
146 
147 	printk(KERN_WARNING "SSP: initialization failed, trying non-irq solution \n");
148 
149 	/* init of Serial 4 port */
150 	Ser4MCCR0 = 0;
151 	Ser4SSCR0 = 0x0387;
152 	Ser4SSCR1 = 0x18;
153 
154 	/* clear out any left over data */
155 	ssp_flush();
156 
157 	/* enable MCU */
158 	jornada_ssp_start();
159 
160 	/* see if return value makes sense */
161 	ret = jornada_ssp_inout(GETBRIGHTNESS);
162 
163 	/* seems like it worked, just feed it with TxDummy to get rid of data */
164 	if (ret == TXDUMMY)
165 		jornada_ssp_inout(TXDUMMY);
166 
167 	jornada_ssp_end();
168 
169 	/* failed, lets just kill everything */
170 	if (ret == -ETIMEDOUT) {
171 		printk(KERN_WARNING "SSP: attempts failed, bailing\n");
172 		ssp_exit();
173 		return -ENODEV;
174 	}
175 
176 	/* all fine */
177 	printk(KERN_INFO "SSP: device initialized\n");
178 	return 0;
179 };
180 
181 static int jornada_ssp_remove(struct platform_device *dev)
182 {
183 	/* Note that this doesn't actually remove the driver, since theres nothing to remove
184 	 * It just makes sure everything is turned off */
185 	GPSR = GPIO_GPIO25;
186 	ssp_exit();
187 	return 0;
188 };
189 
190 struct platform_driver jornadassp_driver = {
191 	.probe	= jornada_ssp_probe,
192 	.remove	= jornada_ssp_remove,
193 	.driver	= {
194 		.name	= "jornada_ssp",
195 	},
196 };
197 
198 static int __init jornada_ssp_init(void)
199 {
200 	return platform_driver_register(&jornadassp_driver);
201 }
202 
203 module_init(jornada_ssp_init);
204