1 /* 2 * linux/arch/arm/mach-sa1100/jornada720.c 3 * 4 * HP Jornada720 init code 5 * 6 * Copyright (C) 2007 Kristoffer Ericson <Kristoffer.Ericson@gmail.com> 7 * Copyright (C) 2006 Filip Zyzniewski <filip.zyzniewski@tefnet.pl> 8 * Copyright (C) 2005 Michael Gernoth <michael@gernoth.net> 9 * 10 * This program is free software; you can redistribute it and/or modify 11 * it under the terms of the GNU General Public License version 2 as 12 * published by the Free Software Foundation. 13 * 14 */ 15 16 #include <linux/init.h> 17 #include <linux/kernel.h> 18 #include <linux/tty.h> 19 #include <linux/delay.h> 20 #include <linux/platform_device.h> 21 #include <linux/ioport.h> 22 #include <linux/mtd/mtd.h> 23 #include <linux/mtd/partitions.h> 24 #include <video/s1d13xxxfb.h> 25 26 #include <mach/hardware.h> 27 #include <asm/hardware/sa1111.h> 28 #include <asm/irq.h> 29 #include <asm/page.h> 30 #include <asm/mach-types.h> 31 #include <asm/setup.h> 32 #include <asm/mach/arch.h> 33 #include <asm/mach/flash.h> 34 #include <asm/mach/map.h> 35 #include <asm/mach/serial_sa1100.h> 36 37 #include "generic.h" 38 39 /* 40 * HP Documentation referred in this file: 41 * http://www.jlime.com/downloads/development/docs/jornada7xx/jornada720.txt 42 */ 43 44 /* line 110 of HP's doc */ 45 #define TUCR_VAL 0x20000400 46 47 /* memory space (line 52 of HP's doc) */ 48 #define SA1111REGSTART 0x40000000 49 #define SA1111REGLEN 0x00001fff 50 #define EPSONREGSTART 0x48000000 51 #define EPSONREGLEN 0x00100000 52 #define EPSONFBSTART 0x48200000 53 /* 512kB framebuffer */ 54 #define EPSONFBLEN 512*1024 55 56 static struct s1d13xxxfb_regval s1d13xxxfb_initregs[] = { 57 /* line 344 of HP's doc */ 58 {0x0001,0x00}, // Miscellaneous Register 59 {0x01FC,0x00}, // Display Mode Register 60 {0x0004,0x00}, // General IO Pins Configuration Register 0 61 {0x0005,0x00}, // General IO Pins Configuration Register 1 62 {0x0008,0x00}, // General IO Pins Control Register 0 63 {0x0009,0x00}, // General IO Pins Control Register 1 64 {0x0010,0x01}, // Memory Clock Configuration Register 65 {0x0014,0x11}, // LCD Pixel Clock Configuration Register 66 {0x0018,0x01}, // CRT/TV Pixel Clock Configuration Register 67 {0x001C,0x01}, // MediaPlug Clock Configuration Register 68 {0x001E,0x01}, // CPU To Memory Wait State Select Register 69 {0x0020,0x00}, // Memory Configuration Register 70 {0x0021,0x45}, // DRAM Refresh Rate Register 71 {0x002A,0x01}, // DRAM Timings Control Register 0 72 {0x002B,0x03}, // DRAM Timings Control Register 1 73 {0x0030,0x1c}, // Panel Type Register 74 {0x0031,0x00}, // MOD Rate Register 75 {0x0032,0x4F}, // LCD Horizontal Display Width Register 76 {0x0034,0x07}, // LCD Horizontal Non-Display Period Register 77 {0x0035,0x01}, // TFT FPLINE Start Position Register 78 {0x0036,0x0B}, // TFT FPLINE Pulse Width Register 79 {0x0038,0xEF}, // LCD Vertical Display Height Register 0 80 {0x0039,0x00}, // LCD Vertical Display Height Register 1 81 {0x003A,0x13}, // LCD Vertical Non-Display Period Register 82 {0x003B,0x0B}, // TFT FPFRAME Start Position Register 83 {0x003C,0x01}, // TFT FPFRAME Pulse Width Register 84 {0x0040,0x05}, // LCD Display Mode Register (2:4bpp,3:8bpp,5:16bpp) 85 {0x0041,0x00}, // LCD Miscellaneous Register 86 {0x0042,0x00}, // LCD Display Start Address Register 0 87 {0x0043,0x00}, // LCD Display Start Address Register 1 88 {0x0044,0x00}, // LCD Display Start Address Register 2 89 {0x0046,0x80}, // LCD Memory Address Offset Register 0 90 {0x0047,0x02}, // LCD Memory Address Offset Register 1 91 {0x0048,0x00}, // LCD Pixel Panning Register 92 {0x004A,0x00}, // LCD Display FIFO High Threshold Control Register 93 {0x004B,0x00}, // LCD Display FIFO Low Threshold Control Register 94 {0x0050,0x4F}, // CRT/TV Horizontal Display Width Register 95 {0x0052,0x13}, // CRT/TV Horizontal Non-Display Period Register 96 {0x0053,0x01}, // CRT/TV HRTC Start Position Register 97 {0x0054,0x0B}, // CRT/TV HRTC Pulse Width Register 98 {0x0056,0xDF}, // CRT/TV Vertical Display Height Register 0 99 {0x0057,0x01}, // CRT/TV Vertical Display Height Register 1 100 {0x0058,0x2B}, // CRT/TV Vertical Non-Display Period Register 101 {0x0059,0x09}, // CRT/TV VRTC Start Position Register 102 {0x005A,0x01}, // CRT/TV VRTC Pulse Width Register 103 {0x005B,0x10}, // TV Output Control Register 104 {0x0060,0x03}, // CRT/TV Display Mode Register (2:4bpp,3:8bpp,5:16bpp) 105 {0x0062,0x00}, // CRT/TV Display Start Address Register 0 106 {0x0063,0x00}, // CRT/TV Display Start Address Register 1 107 {0x0064,0x00}, // CRT/TV Display Start Address Register 2 108 {0x0066,0x40}, // CRT/TV Memory Address Offset Register 0 109 {0x0067,0x01}, // CRT/TV Memory Address Offset Register 1 110 {0x0068,0x00}, // CRT/TV Pixel Panning Register 111 {0x006A,0x00}, // CRT/TV Display FIFO High Threshold Control Register 112 {0x006B,0x00}, // CRT/TV Display FIFO Low Threshold Control Register 113 {0x0070,0x00}, // LCD Ink/Cursor Control Register 114 {0x0071,0x01}, // LCD Ink/Cursor Start Address Register 115 {0x0072,0x00}, // LCD Cursor X Position Register 0 116 {0x0073,0x00}, // LCD Cursor X Position Register 1 117 {0x0074,0x00}, // LCD Cursor Y Position Register 0 118 {0x0075,0x00}, // LCD Cursor Y Position Register 1 119 {0x0076,0x00}, // LCD Ink/Cursor Blue Color 0 Register 120 {0x0077,0x00}, // LCD Ink/Cursor Green Color 0 Register 121 {0x0078,0x00}, // LCD Ink/Cursor Red Color 0 Register 122 {0x007A,0x1F}, // LCD Ink/Cursor Blue Color 1 Register 123 {0x007B,0x3F}, // LCD Ink/Cursor Green Color 1 Register 124 {0x007C,0x1F}, // LCD Ink/Cursor Red Color 1 Register 125 {0x007E,0x00}, // LCD Ink/Cursor FIFO Threshold Register 126 {0x0080,0x00}, // CRT/TV Ink/Cursor Control Register 127 {0x0081,0x01}, // CRT/TV Ink/Cursor Start Address Register 128 {0x0082,0x00}, // CRT/TV Cursor X Position Register 0 129 {0x0083,0x00}, // CRT/TV Cursor X Position Register 1 130 {0x0084,0x00}, // CRT/TV Cursor Y Position Register 0 131 {0x0085,0x00}, // CRT/TV Cursor Y Position Register 1 132 {0x0086,0x00}, // CRT/TV Ink/Cursor Blue Color 0 Register 133 {0x0087,0x00}, // CRT/TV Ink/Cursor Green Color 0 Register 134 {0x0088,0x00}, // CRT/TV Ink/Cursor Red Color 0 Register 135 {0x008A,0x1F}, // CRT/TV Ink/Cursor Blue Color 1 Register 136 {0x008B,0x3F}, // CRT/TV Ink/Cursor Green Color 1 Register 137 {0x008C,0x1F}, // CRT/TV Ink/Cursor Red Color 1 Register 138 {0x008E,0x00}, // CRT/TV Ink/Cursor FIFO Threshold Register 139 {0x0100,0x00}, // BitBlt Control Register 0 140 {0x0101,0x00}, // BitBlt Control Register 1 141 {0x0102,0x00}, // BitBlt ROP Code/Color Expansion Register 142 {0x0103,0x00}, // BitBlt Operation Register 143 {0x0104,0x00}, // BitBlt Source Start Address Register 0 144 {0x0105,0x00}, // BitBlt Source Start Address Register 1 145 {0x0106,0x00}, // BitBlt Source Start Address Register 2 146 {0x0108,0x00}, // BitBlt Destination Start Address Register 0 147 {0x0109,0x00}, // BitBlt Destination Start Address Register 1 148 {0x010A,0x00}, // BitBlt Destination Start Address Register 2 149 {0x010C,0x00}, // BitBlt Memory Address Offset Register 0 150 {0x010D,0x00}, // BitBlt Memory Address Offset Register 1 151 {0x0110,0x00}, // BitBlt Width Register 0 152 {0x0111,0x00}, // BitBlt Width Register 1 153 {0x0112,0x00}, // BitBlt Height Register 0 154 {0x0113,0x00}, // BitBlt Height Register 1 155 {0x0114,0x00}, // BitBlt Background Color Register 0 156 {0x0115,0x00}, // BitBlt Background Color Register 1 157 {0x0118,0x00}, // BitBlt Foreground Color Register 0 158 {0x0119,0x00}, // BitBlt Foreground Color Register 1 159 {0x01E0,0x00}, // Look-Up Table Mode Register 160 {0x01E2,0x00}, // Look-Up Table Address Register 161 /* not sure, wouldn't like to mess with the driver */ 162 {0x01E4,0x00}, // Look-Up Table Data Register 163 /* jornada doc says 0x00, but I trust the driver */ 164 {0x01F0,0x10}, // Power Save Configuration Register 165 {0x01F1,0x00}, // Power Save Status Register 166 {0x01F4,0x00}, // CPU-to-Memory Access Watchdog Timer Register 167 {0x01FC,0x01}, // Display Mode Register(0x01:LCD, 0x02:CRT, 0x03:LCD&CRT) 168 }; 169 170 static struct s1d13xxxfb_pdata s1d13xxxfb_data = { 171 .initregs = s1d13xxxfb_initregs, 172 .initregssize = ARRAY_SIZE(s1d13xxxfb_initregs), 173 .platform_init_video = NULL 174 }; 175 176 static struct resource s1d13xxxfb_resources[] = { 177 [0] = { 178 .start = EPSONFBSTART, 179 .end = EPSONFBSTART + EPSONFBLEN, 180 .flags = IORESOURCE_MEM, 181 }, 182 [1] = { 183 .start = EPSONREGSTART, 184 .end = EPSONREGSTART + EPSONREGLEN, 185 .flags = IORESOURCE_MEM, 186 } 187 }; 188 189 static struct platform_device s1d13xxxfb_device = { 190 .name = S1D_DEVICENAME, 191 .id = 0, 192 .dev = { 193 .platform_data = &s1d13xxxfb_data, 194 }, 195 .num_resources = ARRAY_SIZE(s1d13xxxfb_resources), 196 .resource = s1d13xxxfb_resources, 197 }; 198 199 static struct resource sa1111_resources[] = { 200 [0] = { 201 .start = SA1111REGSTART, 202 .end = SA1111REGSTART + SA1111REGLEN, 203 .flags = IORESOURCE_MEM, 204 }, 205 [1] = { 206 .start = IRQ_GPIO1, 207 .end = IRQ_GPIO1, 208 .flags = IORESOURCE_IRQ, 209 }, 210 }; 211 212 static struct sa1111_platform_data sa1111_info = { 213 .irq_base = IRQ_BOARD_END, 214 }; 215 216 static u64 sa1111_dmamask = 0xffffffffUL; 217 218 static struct platform_device sa1111_device = { 219 .name = "sa1111", 220 .id = 0, 221 .dev = { 222 .dma_mask = &sa1111_dmamask, 223 .coherent_dma_mask = 0xffffffff, 224 .platform_data = &sa1111_info, 225 }, 226 .num_resources = ARRAY_SIZE(sa1111_resources), 227 .resource = sa1111_resources, 228 }; 229 230 static struct platform_device jornada_ssp_device = { 231 .name = "jornada_ssp", 232 .id = -1, 233 }; 234 235 static struct platform_device jornada_kbd_device = { 236 .name = "jornada720_kbd", 237 .id = -1, 238 }; 239 240 static struct platform_device jornada_ts_device = { 241 .name = "jornada_ts", 242 .id = -1, 243 }; 244 245 static struct platform_device *devices[] __initdata = { 246 &sa1111_device, 247 &jornada_ssp_device, 248 &s1d13xxxfb_device, 249 &jornada_kbd_device, 250 &jornada_ts_device, 251 }; 252 253 static int __init jornada720_init(void) 254 { 255 int ret = -ENODEV; 256 257 if (machine_is_jornada720()) { 258 /* we want to use gpio20 as input to drive the clock of our uart 3 */ 259 GPDR |= GPIO_GPIO20; /* Clear gpio20 pin as input */ 260 TUCR = TUCR_VAL; 261 GPSR = GPIO_GPIO20; /* start gpio20 pin */ 262 udelay(1); 263 GPCR = GPIO_GPIO20; /* stop gpio20 */ 264 udelay(1); 265 GPSR = GPIO_GPIO20; /* restart gpio20 */ 266 udelay(20); /* give it some time to restart */ 267 268 ret = platform_add_devices(devices, ARRAY_SIZE(devices)); 269 } 270 271 return ret; 272 } 273 274 arch_initcall(jornada720_init); 275 276 static struct map_desc jornada720_io_desc[] __initdata = { 277 { /* Epson registers */ 278 .virtual = 0xf0000000, 279 .pfn = __phys_to_pfn(EPSONREGSTART), 280 .length = EPSONREGLEN, 281 .type = MT_DEVICE 282 }, { /* Epson frame buffer */ 283 .virtual = 0xf1000000, 284 .pfn = __phys_to_pfn(EPSONFBSTART), 285 .length = EPSONFBLEN, 286 .type = MT_DEVICE 287 }, { /* SA-1111 */ 288 .virtual = 0xf4000000, 289 .pfn = __phys_to_pfn(SA1111REGSTART), 290 .length = SA1111REGLEN, 291 .type = MT_DEVICE 292 } 293 }; 294 295 static void __init jornada720_map_io(void) 296 { 297 sa1100_map_io(); 298 iotable_init(jornada720_io_desc, ARRAY_SIZE(jornada720_io_desc)); 299 300 sa1100_register_uart(0, 3); 301 sa1100_register_uart(1, 1); 302 } 303 304 static struct mtd_partition jornada720_partitions[] = { 305 { 306 .name = "JORNADA720 boot firmware", 307 .size = 0x00040000, 308 .offset = 0, 309 .mask_flags = MTD_WRITEABLE, /* force read-only */ 310 }, { 311 .name = "JORNADA720 kernel", 312 .size = 0x000c0000, 313 .offset = 0x00040000, 314 }, { 315 .name = "JORNADA720 params", 316 .size = 0x00040000, 317 .offset = 0x00100000, 318 }, { 319 .name = "JORNADA720 initrd", 320 .size = 0x00100000, 321 .offset = 0x00140000, 322 }, { 323 .name = "JORNADA720 root cramfs", 324 .size = 0x00300000, 325 .offset = 0x00240000, 326 }, { 327 .name = "JORNADA720 usr cramfs", 328 .size = 0x00800000, 329 .offset = 0x00540000, 330 }, { 331 .name = "JORNADA720 usr local", 332 .size = 0, /* will expand to the end of the flash */ 333 .offset = 0x00d00000, 334 } 335 }; 336 337 static void jornada720_set_vpp(int vpp) 338 { 339 if (vpp) 340 /* enabling flash write (line 470 of HP's doc) */ 341 PPSR |= PPC_LDD7; 342 else 343 /* disabling flash write (line 470 of HP's doc) */ 344 PPSR &= ~PPC_LDD7; 345 PPDR |= PPC_LDD7; 346 } 347 348 static struct flash_platform_data jornada720_flash_data = { 349 .map_name = "cfi_probe", 350 .set_vpp = jornada720_set_vpp, 351 .parts = jornada720_partitions, 352 .nr_parts = ARRAY_SIZE(jornada720_partitions), 353 }; 354 355 static struct resource jornada720_flash_resource = { 356 .start = SA1100_CS0_PHYS, 357 .end = SA1100_CS0_PHYS + SZ_32M - 1, 358 .flags = IORESOURCE_MEM, 359 }; 360 361 static void __init jornada720_mach_init(void) 362 { 363 sa11x0_register_mtd(&jornada720_flash_data, &jornada720_flash_resource, 1); 364 } 365 366 MACHINE_START(JORNADA720, "HP Jornada 720") 367 /* Maintainer: Kristoffer Ericson <Kristoffer.Ericson@gmail.com> */ 368 .atag_offset = 0x100, 369 .map_io = jornada720_map_io, 370 .init_irq = sa1100_init_irq, 371 .timer = &sa1100_timer, 372 .init_machine = jornada720_mach_init, 373 #ifdef CONFIG_SA1111 374 .dma_zone_size = SZ_1M, 375 #endif 376 MACHINE_END 377