xref: /openbmc/linux/arch/arm/mach-sa1100/collie.c (revision 615c36f5)
1 /*
2  * linux/arch/arm/mach-sa1100/collie.c
3  *
4  * May be copied or modified under the terms of the GNU General Public
5  * License.  See linux/COPYING for more information.
6  *
7  * This file contains all Collie-specific tweaks.
8  *
9  * This program is free software; you can redistribute it and/or modify
10  * it under the terms of the GNU General Public License version 2 as
11  * published by the Free Software Foundation.
12  *
13  * ChangeLog:
14  *  2006 Pavel Machek <pavel@ucw.cz>
15  *  03-06-2004 John Lenz <lenz@cs.wisc.edu>
16  *  06-04-2002 Chris Larson <kergoth@digitalnemesis.net>
17  *  04-16-2001 Lineo Japan,Inc. ...
18  */
19 
20 #include <linux/init.h>
21 #include <linux/kernel.h>
22 #include <linux/tty.h>
23 #include <linux/delay.h>
24 #include <linux/platform_device.h>
25 #include <linux/mtd/mtd.h>
26 #include <linux/mtd/partitions.h>
27 #include <linux/timer.h>
28 #include <linux/gpio.h>
29 #include <linux/pda_power.h>
30 
31 #include <mach/hardware.h>
32 #include <asm/mach-types.h>
33 #include <asm/irq.h>
34 #include <asm/page.h>
35 #include <asm/setup.h>
36 #include <mach/collie.h>
37 
38 #include <asm/mach/arch.h>
39 #include <asm/mach/flash.h>
40 #include <asm/mach/map.h>
41 #include <asm/mach/serial_sa1100.h>
42 
43 #include <asm/hardware/scoop.h>
44 #include <asm/mach/sharpsl_param.h>
45 #include <asm/hardware/locomo.h>
46 #include <mach/mcp.h>
47 
48 #include "generic.h"
49 
50 static struct resource collie_scoop_resources[] = {
51 	[0] = {
52 		.start		= 0x40800000,
53 		.end		= 0x40800fff,
54 		.flags		= IORESOURCE_MEM,
55 	},
56 };
57 
58 static struct scoop_config collie_scoop_setup = {
59 	.io_dir 	= COLLIE_SCOOP_IO_DIR,
60 	.io_out		= COLLIE_SCOOP_IO_OUT,
61 	.gpio_base	= COLLIE_SCOOP_GPIO_BASE,
62 };
63 
64 struct platform_device colliescoop_device = {
65 	.name		= "sharp-scoop",
66 	.id		= -1,
67 	.dev		= {
68  		.platform_data	= &collie_scoop_setup,
69 	},
70 	.num_resources	= ARRAY_SIZE(collie_scoop_resources),
71 	.resource	= collie_scoop_resources,
72 };
73 
74 static struct scoop_pcmcia_dev collie_pcmcia_scoop[] = {
75 	{
76 	.dev		= &colliescoop_device.dev,
77 	.irq		= COLLIE_IRQ_GPIO_CF_IRQ,
78 	.cd_irq		= COLLIE_IRQ_GPIO_CF_CD,
79 	.cd_irq_str	= "PCMCIA0 CD",
80 	},
81 };
82 
83 static struct scoop_pcmcia_config collie_pcmcia_config = {
84 	.devs		= &collie_pcmcia_scoop[0],
85 	.num_devs	= 1,
86 };
87 
88 static struct mcp_plat_data collie_mcp_data = {
89 	.mccr0		= MCCR0_ADM | MCCR0_ExtClk,
90 	.sclk_rate	= 9216000,
91 	.gpio_base	= COLLIE_TC35143_GPIO_BASE,
92 };
93 
94 /*
95  * Collie AC IN
96  */
97 static int collie_power_init(struct device *dev)
98 {
99 	int ret = gpio_request(COLLIE_GPIO_AC_IN, "ac in");
100 	if (ret)
101 		goto err_gpio_req;
102 
103 	ret = gpio_direction_input(COLLIE_GPIO_AC_IN);
104 	if (ret)
105 		goto err_gpio_in;
106 
107 	return 0;
108 
109 err_gpio_in:
110 	gpio_free(COLLIE_GPIO_AC_IN);
111 err_gpio_req:
112 	return ret;
113 }
114 
115 static void collie_power_exit(struct device *dev)
116 {
117 	gpio_free(COLLIE_GPIO_AC_IN);
118 }
119 
120 static int collie_power_ac_online(void)
121 {
122 	return gpio_get_value(COLLIE_GPIO_AC_IN) == 2;
123 }
124 
125 static char *collie_ac_supplied_to[] = {
126 	"main-battery",
127 	"backup-battery",
128 };
129 
130 static struct pda_power_pdata collie_power_data = {
131 	.init			= collie_power_init,
132 	.is_ac_online		= collie_power_ac_online,
133 	.exit			= collie_power_exit,
134 	.supplied_to		= collie_ac_supplied_to,
135 	.num_supplicants	= ARRAY_SIZE(collie_ac_supplied_to),
136 };
137 
138 static struct resource collie_power_resource[] = {
139 	{
140 		.name		= "ac",
141 		.start		= gpio_to_irq(COLLIE_GPIO_AC_IN),
142 		.end		= gpio_to_irq(COLLIE_GPIO_AC_IN),
143 		.flags		= IORESOURCE_IRQ |
144 				  IORESOURCE_IRQ_HIGHEDGE |
145 				  IORESOURCE_IRQ_LOWEDGE,
146 	},
147 };
148 
149 static struct platform_device collie_power_device = {
150 	.name			= "pda-power",
151 	.id			= -1,
152 	.dev.platform_data	= &collie_power_data,
153 	.resource		= collie_power_resource,
154 	.num_resources		= ARRAY_SIZE(collie_power_resource),
155 };
156 
157 #ifdef CONFIG_SHARP_LOCOMO
158 /*
159  * low-level UART features.
160  */
161 struct platform_device collie_locomo_device;
162 
163 static void collie_uart_set_mctrl(struct uart_port *port, u_int mctrl)
164 {
165 	if (mctrl & TIOCM_RTS)
166 		locomo_gpio_write(&collie_locomo_device.dev, LOCOMO_GPIO_RTS, 0);
167 	else
168 		locomo_gpio_write(&collie_locomo_device.dev, LOCOMO_GPIO_RTS, 1);
169 
170 	if (mctrl & TIOCM_DTR)
171 		locomo_gpio_write(&collie_locomo_device.dev, LOCOMO_GPIO_DTR, 0);
172 	else
173 		locomo_gpio_write(&collie_locomo_device.dev, LOCOMO_GPIO_DTR, 1);
174 }
175 
176 static u_int collie_uart_get_mctrl(struct uart_port *port)
177 {
178 	int ret = TIOCM_CD;
179 	unsigned int r;
180 
181 	r = locomo_gpio_read_output(&collie_locomo_device.dev, LOCOMO_GPIO_CTS & LOCOMO_GPIO_DSR);
182 	if (r == -ENODEV)
183 		return ret;
184 	if (r & LOCOMO_GPIO_CTS)
185 		ret |= TIOCM_CTS;
186 	if (r & LOCOMO_GPIO_DSR)
187 		ret |= TIOCM_DSR;
188 
189 	return ret;
190 }
191 
192 static struct sa1100_port_fns collie_port_fns __initdata = {
193 	.set_mctrl	= collie_uart_set_mctrl,
194 	.get_mctrl	= collie_uart_get_mctrl,
195 };
196 
197 static int collie_uart_probe(struct locomo_dev *dev)
198 {
199 	return 0;
200 }
201 
202 static int collie_uart_remove(struct locomo_dev *dev)
203 {
204 	return 0;
205 }
206 
207 static struct locomo_driver collie_uart_driver = {
208 	.drv = {
209 		.name = "collie_uart",
210 	},
211 	.devid	= LOCOMO_DEVID_UART,
212 	.probe	= collie_uart_probe,
213 	.remove	= collie_uart_remove,
214 };
215 
216 static int __init collie_uart_init(void)
217 {
218 	return locomo_driver_register(&collie_uart_driver);
219 }
220 device_initcall(collie_uart_init);
221 
222 #endif
223 
224 
225 static struct resource locomo_resources[] = {
226 	[0] = {
227 		.start		= 0x40000000,
228 		.end		= 0x40001fff,
229 		.flags		= IORESOURCE_MEM,
230 	},
231 	[1] = {
232 		.start		= IRQ_GPIO25,
233 		.end		= IRQ_GPIO25,
234 		.flags		= IORESOURCE_IRQ,
235 	},
236 };
237 
238 static struct locomo_platform_data locomo_info = {
239 	.irq_base	= IRQ_BOARD_START,
240 };
241 
242 struct platform_device collie_locomo_device = {
243 	.name		= "locomo",
244 	.id		= 0,
245 	.dev		= {
246 		.platform_data	= &locomo_info,
247 	},
248 	.num_resources	= ARRAY_SIZE(locomo_resources),
249 	.resource	= locomo_resources,
250 };
251 
252 static struct platform_device *devices[] __initdata = {
253 	&collie_locomo_device,
254 	&colliescoop_device,
255 	&collie_power_device,
256 };
257 
258 static struct mtd_partition collie_partitions[] = {
259 	{
260 		.name		= "bootloader",
261 		.offset 	= 0,
262 		.size		= 0x000C0000,
263 		.mask_flags	= MTD_WRITEABLE
264 	}, {
265 		.name		= "kernel",
266 		.offset 	= MTDPART_OFS_APPEND,
267 		.size		= 0x00100000,
268 	}, {
269 		.name		= "rootfs",
270 		.offset 	= MTDPART_OFS_APPEND,
271 		.size		= 0x00e20000,
272 	}
273 };
274 
275 static int collie_flash_init(void)
276 {
277 	int rc = gpio_request(COLLIE_GPIO_VPEN, "flash Vpp enable");
278 	if (rc)
279 		return rc;
280 
281 	rc = gpio_direction_output(COLLIE_GPIO_VPEN, 1);
282 	if (rc)
283 		gpio_free(COLLIE_GPIO_VPEN);
284 
285 	return rc;
286 }
287 
288 static void collie_set_vpp(int vpp)
289 {
290 	gpio_set_value(COLLIE_GPIO_VPEN, vpp);
291 }
292 
293 static void collie_flash_exit(void)
294 {
295 	gpio_free(COLLIE_GPIO_VPEN);
296 }
297 
298 static struct flash_platform_data collie_flash_data = {
299 	.map_name	= "cfi_probe",
300 	.init		= collie_flash_init,
301 	.set_vpp	= collie_set_vpp,
302 	.exit		= collie_flash_exit,
303 	.parts		= collie_partitions,
304 	.nr_parts	= ARRAY_SIZE(collie_partitions),
305 };
306 
307 static struct resource collie_flash_resources[] = {
308 	{
309 		.start	= SA1100_CS0_PHYS,
310 		.end	= SA1100_CS0_PHYS + SZ_32M - 1,
311 		.flags	= IORESOURCE_MEM,
312 	}
313 };
314 
315 static void __init collie_init(void)
316 {
317 	int ret = 0;
318 
319 	/* cpu initialize */
320 	GAFR = GPIO_SSP_TXD | GPIO_SSP_SCLK | GPIO_SSP_SFRM | GPIO_SSP_CLK |
321 		GPIO_MCP_CLK | GPIO_32_768kHz;
322 
323 	GPDR = GPIO_LDD8 | GPIO_LDD9 | GPIO_LDD10 | GPIO_LDD11 | GPIO_LDD12 |
324 		GPIO_LDD13 | GPIO_LDD14 | GPIO_LDD15 | GPIO_SSP_TXD |
325 		GPIO_SSP_SCLK | GPIO_SSP_SFRM | GPIO_SDLC_SCLK |
326 		_COLLIE_GPIO_UCB1x00_RESET | _COLLIE_GPIO_nMIC_ON |
327 		_COLLIE_GPIO_nREMOCON_ON | GPIO_32_768kHz;
328 
329 	PPDR = PPC_LDD0 | PPC_LDD1 | PPC_LDD2 | PPC_LDD3 | PPC_LDD4 | PPC_LDD5 |
330 		PPC_LDD6 | PPC_LDD7 | PPC_L_PCLK | PPC_L_LCLK | PPC_L_FCLK | PPC_L_BIAS |
331 		PPC_TXD1 | PPC_TXD2 | PPC_TXD3 | PPC_TXD4 | PPC_SCLK | PPC_SFRM;
332 
333 	PWER = _COLLIE_GPIO_AC_IN | _COLLIE_GPIO_CO | _COLLIE_GPIO_ON_KEY |
334 		_COLLIE_GPIO_WAKEUP | _COLLIE_GPIO_nREMOCON_INT | PWER_RTC;
335 
336 	PGSR = _COLLIE_GPIO_nREMOCON_ON;
337 
338 	PSDR = PPC_RXD1 | PPC_RXD2 | PPC_RXD3 | PPC_RXD4;
339 
340 	PCFR = PCFR_OPDE;
341 
342 	GPSR |= _COLLIE_GPIO_UCB1x00_RESET;
343 
344 
345 	platform_scoop_config = &collie_pcmcia_config;
346 
347 	ret = platform_add_devices(devices, ARRAY_SIZE(devices));
348 	if (ret) {
349 		printk(KERN_WARNING "collie: Unable to register LoCoMo device\n");
350 	}
351 
352 	sa11x0_register_mtd(&collie_flash_data, collie_flash_resources,
353 			    ARRAY_SIZE(collie_flash_resources));
354 	sa11x0_register_mcp(&collie_mcp_data);
355 
356 	sharpsl_save_param();
357 }
358 
359 static struct map_desc collie_io_desc[] __initdata = {
360 	{	/* 32M main flash (cs0) */
361 		.virtual	= 0xe8000000,
362 		.pfn		= __phys_to_pfn(0x00000000),
363 		.length		= 0x02000000,
364 		.type		= MT_DEVICE
365 	}, {	/* 32M boot flash (cs1) */
366 		.virtual	= 0xea000000,
367 		.pfn		= __phys_to_pfn(0x08000000),
368 		.length		= 0x02000000,
369 		.type		= MT_DEVICE
370 	}
371 };
372 
373 static void __init collie_map_io(void)
374 {
375 	sa1100_map_io();
376 	iotable_init(collie_io_desc, ARRAY_SIZE(collie_io_desc));
377 
378 #ifdef CONFIG_SHARP_LOCOMO
379 	sa1100_register_uart_fns(&collie_port_fns);
380 #endif
381 	sa1100_register_uart(0, 3);
382 	sa1100_register_uart(1, 1);
383 }
384 
385 MACHINE_START(COLLIE, "Sharp-Collie")
386 	.map_io		= collie_map_io,
387 	.init_irq	= sa1100_init_irq,
388 	.timer		= &sa1100_timer,
389 	.init_machine	= collie_init,
390 MACHINE_END
391