1# SPDX-License-Identifier: GPL-2.0-only 2menuconfig ARCH_SA1100 3 bool "SA11x0 Implementations" 4 depends on ARCH_MULTI_V4 && !(ARCH_MULTI_V4T || ARCH_MULTI_V5) 5 depends on !(ARCH_MOXART || ARCH_GEMINI) 6 depends on ATAGS 7 depends on CPU_LITTLE_ENDIAN 8 depends on MMU 9 select ARCH_NO_SG_CHAIN 10 select ARCH_MTD_XIP 11 select CLKSRC_MMIO 12 select CLKSRC_PXA 13 select CPU_FREQ 14 select CPU_SA1100 15 select GPIOLIB 16 select IRQ_DOMAIN 17 select ISA 18 select NEED_MACH_MEMORY_H 19 help 20 Support for StrongARM 11x0 based boards. 21 22if ARCH_SA1100 23 24config SA1100_ASSABET 25 bool "Assabet" 26 select ARM_SA1110_CPUFREQ 27 select GPIO_REG 28 select LEDS_GPIO_REGISTER 29 select REGULATOR 30 select REGULATOR_FIXED_VOLTAGE 31 help 32 Say Y here if you are using the Intel(R) StrongARM(R) SA-1110 33 Microprocessor Development Board (also known as the Assabet). 34 35config ASSABET_NEPONSET 36 bool "Include support for Neponset" 37 depends on SA1100_ASSABET 38 select SA1111 39 help 40 Say Y here if you are using the Intel(R) StrongARM(R) SA-1110 41 Microprocessor Development Board (Assabet) with the SA-1111 42 Development Board (Nepon). 43 44config SA1100_CERF 45 bool "CerfBoard" 46 depends on UNUSED_BOARD_FILES 47 select ARM_SA1110_CPUFREQ 48 select LEDS_GPIO_REGISTER 49 help 50 The Intrinsyc CerfBoard is based on the StrongARM 1110 (Discontinued). 51 More information is available at: 52 <http://www.intrinsyc.com/products/cerfboard/>. 53 54 Say Y if configuring for an Intrinsyc CerfBoard. 55 Say N otherwise. 56 57choice 58 prompt "Cerf Flash available" 59 depends on SA1100_CERF 60 default SA1100_CERF_FLASH_8MB 61 62config SA1100_CERF_FLASH_8MB 63 bool "8MB" 64 65config SA1100_CERF_FLASH_16MB 66 bool "16MB" 67 68config SA1100_CERF_FLASH_32MB 69 bool "32MB" 70 71endchoice 72 73config SA1100_COLLIE 74 bool "Sharp Zaurus SL5500" 75 # FIXME: select ARM_SA11x0_CPUFREQ 76 select SHARP_LOCOMO 77 select SHARP_PARAM 78 select SHARP_SCOOP 79 help 80 Say Y here to support the Sharp Zaurus SL5500 PDAs. 81 82config SA1100_H3100 83 bool "Compaq iPAQ H3100" 84 depends on UNUSED_BOARD_FILES 85 select ARM_SA1110_CPUFREQ 86 select HTC_EGPIO 87 select MFD_IPAQ_MICRO 88 help 89 Say Y here if you intend to run this kernel on the Compaq iPAQ 90 H3100 handheld computer. 91 92config SA1100_H3600 93 bool "Compaq iPAQ H3600/H3700" 94 select ARM_SA1110_CPUFREQ 95 select HTC_EGPIO 96 select MFD_IPAQ_MICRO 97 help 98 Say Y here if you intend to run this kernel on the Compaq iPAQ 99 H3600 and H3700 handheld computers. 100 101config SA1100_BADGE4 102 bool "HP Labs BadgePAD 4" 103 depends on UNUSED_BOARD_FILES 104 select ARM_SA1100_CPUFREQ 105 select SA1111 106 help 107 Say Y here if you want to build a kernel for the HP Laboratories 108 BadgePAD 4. 109 110config SA1100_JORNADA720 111 bool "HP Jornada 720" 112 depends on UNUSED_BOARD_FILES 113 # FIXME: select ARM_SA11x0_CPUFREQ 114 select SA1111 115 help 116 Say Y here if you want to build a kernel for the HP Jornada 720 117 handheld computer. See 118 <http://h10025.www1.hp.com/ewfrf/wc/product?product=61677&cc=us&lc=en&dlc=en&product=61677#> 119 120config SA1100_JORNADA720_SSP 121 bool "HP Jornada 720 Extended SSP driver" 122 depends on SA1100_JORNADA720 123 select SA1100_SSP 124 help 125 Say Y here if you have a HP Jornada 7xx handheld computer and you 126 want to access devices connected to the MCU. Those include the 127 keyboard, touchscreen, backlight and battery. This driver also activates 128 the generic SSP which it extends. 129 130config SA1100_HACKKIT 131 bool "HackKit Core CPU Board" 132 depends on UNUSED_BOARD_FILES 133 select ARM_SA1100_CPUFREQ 134 help 135 Say Y here to support the HackKit Core CPU Board 136 <http://hackkit.eletztrick.de>; 137 138config SA1100_LART 139 bool "LART" 140 depends on UNUSED_BOARD_FILES 141 select ARM_SA1100_CPUFREQ 142 help 143 Say Y here if you are using the Linux Advanced Radio Terminal 144 (also known as the LART). See <http://www.lartmaker.nl/> for 145 information on the LART. 146 147config SA1100_NANOENGINE 148 bool "nanoEngine" 149 depends on UNUSED_BOARD_FILES 150 select ARM_SA1110_CPUFREQ 151 select FORCE_PCI 152 select PCI_NANOENGINE 153 help 154 Say Y here if you are using the Bright Star Engineering nanoEngine. 155 See <http://www.brightstareng.com/arm/nanoeng.htm> for information 156 on the BSE nanoEngine. 157 158config SA1100_PLEB 159 bool "PLEB" 160 depends on UNUSED_BOARD_FILES 161 select ARM_SA1100_CPUFREQ 162 help 163 Say Y here if you are using version 1 of the Portable Linux 164 Embedded Board (also known as PLEB). 165 See <http://www.disy.cse.unsw.edu.au/Hardware/PLEB/> 166 for more information. 167 168config SA1100_SHANNON 169 bool "Shannon" 170 depends on UNUSED_BOARD_FILES 171 select ARM_SA1100_CPUFREQ 172 select REGULATOR 173 select REGULATOR_FIXED_VOLTAGE 174 help 175 The Shannon (also known as a Tuxscreen, and also as a IS2630) was a 176 limited edition webphone produced by Philips. The Shannon is a SA1100 177 platform with a 640x480 LCD, touchscreen, CIR keyboard, PCMCIA slots, 178 and a telco interface. 179 180config SA1100_SIMPAD 181 bool "Simpad" 182 depends on UNUSED_BOARD_FILES 183 select ARM_SA1110_CPUFREQ 184 help 185 The SIEMENS webpad SIMpad is based on the StrongARM 1110. There 186 are two different versions CL4 and SL4. CL4 has 32MB RAM and 16MB 187 FLASH. The SL4 version got 64 MB RAM and 32 MB FLASH and a 188 PCMCIA-Slot. The version for the Germany Telecom (DTAG) is the same 189 like CL4 in additional it has a PCMCIA-Slot. For more information 190 visit <http://www.usa.siemens.com/> or <http://www.siemens.ch/>. 191 192config SA1100_SSP 193 tristate "Generic PIO SSP" 194 depends on UNUSED_BOARD_FILES 195 help 196 Say Y here to enable support for the generic PIO SSP driver. 197 This isn't for audio support, but for attached sensors and 198 other devices, eg for BadgePAD 4 sensor support. 199 200endif 201