1# SPDX-License-Identifier: GPL-2.0-only 2if ARCH_SA1100 3 4menu "SA11x0 Implementations" 5 6config SA1100_ASSABET 7 bool "Assabet" 8 select ARM_SA1110_CPUFREQ 9 select GPIO_REG 10 select LEDS_GPIO_REGISTER 11 select REGULATOR 12 select REGULATOR_FIXED_VOLTAGE 13 help 14 Say Y here if you are using the Intel(R) StrongARM(R) SA-1110 15 Microprocessor Development Board (also known as the Assabet). 16 17config ASSABET_NEPONSET 18 bool "Include support for Neponset" 19 depends on SA1100_ASSABET 20 select SA1111 21 help 22 Say Y here if you are using the Intel(R) StrongARM(R) SA-1110 23 Microprocessor Development Board (Assabet) with the SA-1111 24 Development Board (Nepon). 25 26config SA1100_CERF 27 bool "CerfBoard" 28 select ARM_SA1110_CPUFREQ 29 select LEDS_GPIO_REGISTER 30 help 31 The Intrinsyc CerfBoard is based on the StrongARM 1110 (Discontinued). 32 More information is available at: 33 <http://www.intrinsyc.com/products/cerfboard/>. 34 35 Say Y if configuring for an Intrinsyc CerfBoard. 36 Say N otherwise. 37 38choice 39 prompt "Cerf Flash available" 40 depends on SA1100_CERF 41 default SA1100_CERF_FLASH_8MB 42 43config SA1100_CERF_FLASH_8MB 44 bool "8MB" 45 46config SA1100_CERF_FLASH_16MB 47 bool "16MB" 48 49config SA1100_CERF_FLASH_32MB 50 bool "32MB" 51 52endchoice 53 54config SA1100_COLLIE 55 bool "Sharp Zaurus SL5500" 56 # FIXME: select ARM_SA11x0_CPUFREQ 57 select SHARP_LOCOMO 58 select SHARP_PARAM 59 select SHARP_SCOOP 60 help 61 Say Y here to support the Sharp Zaurus SL5500 PDAs. 62 63config SA1100_H3100 64 bool "Compaq iPAQ H3100" 65 select ARM_SA1110_CPUFREQ 66 select HTC_EGPIO 67 select MFD_IPAQ_MICRO 68 help 69 Say Y here if you intend to run this kernel on the Compaq iPAQ 70 H3100 handheld computer. 71 72config SA1100_H3600 73 bool "Compaq iPAQ H3600/H3700" 74 select ARM_SA1110_CPUFREQ 75 select HTC_EGPIO 76 select MFD_IPAQ_MICRO 77 help 78 Say Y here if you intend to run this kernel on the Compaq iPAQ 79 H3600 and H3700 handheld computers. 80 81config SA1100_BADGE4 82 bool "HP Labs BadgePAD 4" 83 select ARM_SA1100_CPUFREQ 84 select SA1111 85 help 86 Say Y here if you want to build a kernel for the HP Laboratories 87 BadgePAD 4. 88 89config SA1100_JORNADA720 90 bool "HP Jornada 720" 91 # FIXME: select ARM_SA11x0_CPUFREQ 92 select SA1111 93 help 94 Say Y here if you want to build a kernel for the HP Jornada 720 95 handheld computer. See 96 <http://h10025.www1.hp.com/ewfrf/wc/product?product=61677&cc=us&lc=en&dlc=en&product=61677#> 97 98config SA1100_JORNADA720_SSP 99 bool "HP Jornada 720 Extended SSP driver" 100 depends on SA1100_JORNADA720 101 select SA1100_SSP 102 help 103 Say Y here if you have a HP Jornada 7xx handheld computer and you 104 want to access devices connected to the MCU. Those include the 105 keyboard, touchscreen, backlight and battery. This driver also activates 106 the generic SSP which it extends. 107 108config SA1100_HACKKIT 109 bool "HackKit Core CPU Board" 110 select ARM_SA1100_CPUFREQ 111 help 112 Say Y here to support the HackKit Core CPU Board 113 <http://hackkit.eletztrick.de>; 114 115config SA1100_LART 116 bool "LART" 117 select ARM_SA1100_CPUFREQ 118 help 119 Say Y here if you are using the Linux Advanced Radio Terminal 120 (also known as the LART). See <http://www.lartmaker.nl/> for 121 information on the LART. 122 123config SA1100_NANOENGINE 124 bool "nanoEngine" 125 select ARM_SA1110_CPUFREQ 126 select FORCE_PCI 127 select PCI_NANOENGINE 128 help 129 Say Y here if you are using the Bright Star Engineering nanoEngine. 130 See <http://www.brightstareng.com/arm/nanoeng.htm> for information 131 on the BSE nanoEngine. 132 133config SA1100_PLEB 134 bool "PLEB" 135 select ARM_SA1100_CPUFREQ 136 help 137 Say Y here if you are using version 1 of the Portable Linux 138 Embedded Board (also known as PLEB). 139 See <http://www.disy.cse.unsw.edu.au/Hardware/PLEB/> 140 for more information. 141 142config SA1100_SHANNON 143 bool "Shannon" 144 select ARM_SA1100_CPUFREQ 145 select REGULATOR 146 select REGULATOR_FIXED_VOLTAGE 147 help 148 The Shannon (also known as a Tuxscreen, and also as a IS2630) was a 149 limited edition webphone produced by Philips. The Shannon is a SA1100 150 platform with a 640x480 LCD, touchscreen, CIR keyboard, PCMCIA slots, 151 and a telco interface. 152 153config SA1100_SIMPAD 154 bool "Simpad" 155 select ARM_SA1110_CPUFREQ 156 help 157 The SIEMENS webpad SIMpad is based on the StrongARM 1110. There 158 are two different versions CL4 and SL4. CL4 has 32MB RAM and 16MB 159 FLASH. The SL4 version got 64 MB RAM and 32 MB FLASH and a 160 PCMCIA-Slot. The version for the Germany Telecom (DTAG) is the same 161 like CL4 in additional it has a PCMCIA-Slot. For more information 162 visit <http://www.usa.siemens.com/> or <http://www.siemens.ch/>. 163 164config SA1100_SSP 165 tristate "Generic PIO SSP" 166 help 167 Say Y here to enable support for the generic PIO SSP driver. 168 This isn't for audio support, but for attached sensors and 169 other devices, eg for BadgePAD 4 sensor support. 170 171endmenu 172 173endif 174 175