1if ARCH_SA1100 2 3menu "SA11x0 Implementations" 4 5config SA1100_ASSABET 6 bool "Assabet" 7 select ARM_SA1110_CPUFREQ 8 select GPIO_REG 9 help 10 Say Y here if you are using the Intel(R) StrongARM(R) SA-1110 11 Microprocessor Development Board (also known as the Assabet). 12 13config ASSABET_NEPONSET 14 bool "Include support for Neponset" 15 depends on SA1100_ASSABET 16 select SA1111 17 help 18 Say Y here if you are using the Intel(R) StrongARM(R) SA-1110 19 Microprocessor Development Board (Assabet) with the SA-1111 20 Development Board (Nepon). 21 22config SA1100_CERF 23 bool "CerfBoard" 24 select ARM_SA1110_CPUFREQ 25 help 26 The Intrinsyc CerfBoard is based on the StrongARM 1110 (Discontinued). 27 More information is available at: 28 <http://www.intrinsyc.com/products/cerfboard/>. 29 30 Say Y if configuring for an Intrinsyc CerfBoard. 31 Say N otherwise. 32 33choice 34 prompt "Cerf Flash available" 35 depends on SA1100_CERF 36 default SA1100_CERF_FLASH_8MB 37 38config SA1100_CERF_FLASH_8MB 39 bool "8MB" 40 41config SA1100_CERF_FLASH_16MB 42 bool "16MB" 43 44config SA1100_CERF_FLASH_32MB 45 bool "32MB" 46 47endchoice 48 49config SA1100_COLLIE 50 bool "Sharp Zaurus SL5500" 51 # FIXME: select ARM_SA11x0_CPUFREQ 52 select SHARP_LOCOMO 53 select SHARP_PARAM 54 select SHARP_SCOOP 55 help 56 Say Y here to support the Sharp Zaurus SL5500 PDAs. 57 58config SA1100_H3100 59 bool "Compaq iPAQ H3100" 60 select ARM_SA1110_CPUFREQ 61 select HTC_EGPIO 62 select MFD_IPAQ_MICRO 63 help 64 Say Y here if you intend to run this kernel on the Compaq iPAQ 65 H3100 handheld computer. 66 67config SA1100_H3600 68 bool "Compaq iPAQ H3600/H3700" 69 select ARM_SA1110_CPUFREQ 70 select HTC_EGPIO 71 select MFD_IPAQ_MICRO 72 help 73 Say Y here if you intend to run this kernel on the Compaq iPAQ 74 H3600 and H3700 handheld computers. 75 76config SA1100_BADGE4 77 bool "HP Labs BadgePAD 4" 78 select ARM_SA1100_CPUFREQ 79 select SA1111 80 help 81 Say Y here if you want to build a kernel for the HP Laboratories 82 BadgePAD 4. 83 84config SA1100_JORNADA720 85 bool "HP Jornada 720" 86 # FIXME: select ARM_SA11x0_CPUFREQ 87 select SA1111 88 help 89 Say Y here if you want to build a kernel for the HP Jornada 720 90 handheld computer. See 91 <http://h10025.www1.hp.com/ewfrf/wc/product?product=61677&cc=us&lc=en&dlc=en&product=61677#> 92 93config SA1100_JORNADA720_SSP 94 bool "HP Jornada 720 Extended SSP driver" 95 depends on SA1100_JORNADA720 96 select SA1100_SSP 97 help 98 Say Y here if you have a HP Jornada 7xx handheld computer and you 99 want to access devices connected to the MCU. Those include the 100 keyboard, touchscreen, backlight and battery. This driver also activates 101 the generic SSP which it extends. 102 103config SA1100_HACKKIT 104 bool "HackKit Core CPU Board" 105 select ARM_SA1100_CPUFREQ 106 help 107 Say Y here to support the HackKit Core CPU Board 108 <http://hackkit.eletztrick.de>; 109 110config SA1100_LART 111 bool "LART" 112 select ARM_SA1100_CPUFREQ 113 help 114 Say Y here if you are using the Linux Advanced Radio Terminal 115 (also known as the LART). See <http://www.lartmaker.nl/> for 116 information on the LART. 117 118config SA1100_NANOENGINE 119 bool "nanoEngine" 120 select ARM_SA1110_CPUFREQ 121 select PCI 122 select PCI_NANOENGINE 123 help 124 Say Y here if you are using the Bright Star Engineering nanoEngine. 125 See <http://www.brightstareng.com/arm/nanoeng.htm> for information 126 on the BSE nanoEngine. 127 128config SA1100_PLEB 129 bool "PLEB" 130 select ARM_SA1100_CPUFREQ 131 help 132 Say Y here if you are using version 1 of the Portable Linux 133 Embedded Board (also known as PLEB). 134 See <http://www.disy.cse.unsw.edu.au/Hardware/PLEB/> 135 for more information. 136 137config SA1100_SHANNON 138 bool "Shannon" 139 select ARM_SA1100_CPUFREQ 140 help 141 The Shannon (also known as a Tuxscreen, and also as a IS2630) was a 142 limited edition webphone produced by Philips. The Shannon is a SA1100 143 platform with a 640x480 LCD, touchscreen, CIR keyboard, PCMCIA slots, 144 and a telco interface. 145 146config SA1100_SIMPAD 147 bool "Simpad" 148 select ARM_SA1110_CPUFREQ 149 help 150 The SIEMENS webpad SIMpad is based on the StrongARM 1110. There 151 are two different versions CL4 and SL4. CL4 has 32MB RAM and 16MB 152 FLASH. The SL4 version got 64 MB RAM and 32 MB FLASH and a 153 PCMCIA-Slot. The version for the Germany Telecom (DTAG) is the same 154 like CL4 in additional it has a PCMCIA-Slot. For more information 155 visit <http://www.usa.siemens.com/> or <http://www.siemens.ch/>. 156 157config SA1100_SSP 158 tristate "Generic PIO SSP" 159 help 160 Say Y here to enable support for the generic PIO SSP driver. 161 This isn't for audio support, but for attached sensors and 162 other devices, eg for BadgePAD 4 sensor support. 163 164endmenu 165 166endif 167 168