1 // SPDX-License-Identifier: GPL-2.0 2 // 3 // Copyright (c) 2011 Samsung Electronics Co., Ltd. 4 // http://www.samsung.com 5 // 6 // Copyright 2008 Openmoko, Inc. 7 // Copyright 2008 Simtec Electronics 8 // Ben Dooks <ben@simtec.co.uk> 9 // http://armlinux.simtec.co.uk/ 10 // 11 // Common Codes for S3C64XX machines 12 13 /* 14 * NOTE: Code in this file is not used when booting with Device Tree support. 15 */ 16 17 #include <linux/kernel.h> 18 #include <linux/init.h> 19 #include <linux/module.h> 20 #include <linux/interrupt.h> 21 #include <linux/ioport.h> 22 #include <linux/serial_core.h> 23 #include <linux/serial_s3c.h> 24 #include <linux/platform_device.h> 25 #include <linux/reboot.h> 26 #include <linux/io.h> 27 #include <linux/clk/samsung.h> 28 #include <linux/dma-mapping.h> 29 #include <linux/irq.h> 30 #include <linux/gpio.h> 31 #include <linux/irqchip/arm-vic.h> 32 #include <clocksource/samsung_pwm.h> 33 34 #include <asm/mach/arch.h> 35 #include <asm/mach/map.h> 36 #include <asm/system_misc.h> 37 38 #include "map.h" 39 #include "irqs.h" 40 #include "regs-gpio.h" 41 #include "gpio-samsung.h" 42 43 #include "cpu.h" 44 #include "devs.h" 45 #include "pm.h" 46 #include "gpio-cfg.h" 47 #include "pwm-core.h" 48 #include "regs-irqtype.h" 49 #include "s3c64xx.h" 50 #include "irq-uart-s3c64xx.h" 51 52 /* External clock frequency */ 53 static unsigned long xtal_f __ro_after_init = 12000000; 54 static unsigned long xusbxti_f __ro_after_init = 48000000; 55 56 void __init s3c64xx_set_xtal_freq(unsigned long freq) 57 { 58 xtal_f = freq; 59 } 60 61 void __init s3c64xx_set_xusbxti_freq(unsigned long freq) 62 { 63 xusbxti_f = freq; 64 } 65 66 /* uart registration process */ 67 68 static void __init s3c64xx_init_uarts(struct s3c2410_uartcfg *cfg, int no) 69 { 70 s3c24xx_init_uartdevs("s3c6400-uart", s3c64xx_uart_resources, cfg, no); 71 } 72 73 /* table of supported CPUs */ 74 75 static const char name_s3c6410[] = "S3C6410"; 76 77 static struct cpu_table cpu_ids[] __initdata = { 78 { 79 .idcode = S3C6410_CPU_ID, 80 .idmask = S3C64XX_CPU_MASK, 81 .map_io = s3c6410_map_io, 82 .init_uarts = s3c64xx_init_uarts, 83 .init = s3c6410_init, 84 .name = name_s3c6410, 85 }, 86 }; 87 88 /* minimal IO mapping */ 89 90 /* 91 * note, for the boot process to work we have to keep the UART 92 * virtual address aligned to an 1MiB boundary for the L1 93 * mapping the head code makes. We keep the UART virtual address 94 * aligned and add in the offset when we load the value here. 95 */ 96 #define UART_OFFS (S3C_PA_UART & 0xfffff) 97 98 static struct map_desc s3c_iodesc[] __initdata = { 99 { 100 .virtual = (unsigned long)S3C_VA_SYS, 101 .pfn = __phys_to_pfn(S3C64XX_PA_SYSCON), 102 .length = SZ_4K, 103 .type = MT_DEVICE, 104 }, { 105 .virtual = (unsigned long)S3C_VA_MEM, 106 .pfn = __phys_to_pfn(S3C64XX_PA_SROM), 107 .length = SZ_4K, 108 .type = MT_DEVICE, 109 }, { 110 .virtual = (unsigned long)(S3C_VA_UART + UART_OFFS), 111 .pfn = __phys_to_pfn(S3C_PA_UART), 112 .length = SZ_4K, 113 .type = MT_DEVICE, 114 }, { 115 .virtual = (unsigned long)VA_VIC0, 116 .pfn = __phys_to_pfn(S3C64XX_PA_VIC0), 117 .length = SZ_16K, 118 .type = MT_DEVICE, 119 }, { 120 .virtual = (unsigned long)VA_VIC1, 121 .pfn = __phys_to_pfn(S3C64XX_PA_VIC1), 122 .length = SZ_16K, 123 .type = MT_DEVICE, 124 }, { 125 .virtual = (unsigned long)S3C_VA_TIMER, 126 .pfn = __phys_to_pfn(S3C_PA_TIMER), 127 .length = SZ_16K, 128 .type = MT_DEVICE, 129 }, { 130 .virtual = (unsigned long)S3C64XX_VA_GPIO, 131 .pfn = __phys_to_pfn(S3C64XX_PA_GPIO), 132 .length = SZ_4K, 133 .type = MT_DEVICE, 134 }, { 135 .virtual = (unsigned long)S3C64XX_VA_MODEM, 136 .pfn = __phys_to_pfn(S3C64XX_PA_MODEM), 137 .length = SZ_4K, 138 .type = MT_DEVICE, 139 }, { 140 .virtual = (unsigned long)S3C_VA_WATCHDOG, 141 .pfn = __phys_to_pfn(S3C64XX_PA_WATCHDOG), 142 .length = SZ_4K, 143 .type = MT_DEVICE, 144 }, { 145 .virtual = (unsigned long)S3C_VA_USB_HSPHY, 146 .pfn = __phys_to_pfn(S3C64XX_PA_USB_HSPHY), 147 .length = SZ_1K, 148 .type = MT_DEVICE, 149 }, 150 }; 151 152 static struct bus_type s3c64xx_subsys = { 153 .name = "s3c64xx-core", 154 .dev_name = "s3c64xx-core", 155 }; 156 157 static struct device s3c64xx_dev = { 158 .bus = &s3c64xx_subsys, 159 }; 160 161 static struct samsung_pwm_variant s3c64xx_pwm_variant = { 162 .bits = 32, 163 .div_base = 0, 164 .has_tint_cstat = true, 165 .tclk_mask = (1 << 7) | (1 << 6) | (1 << 5), 166 }; 167 168 void __init s3c64xx_set_timer_source(enum s3c64xx_timer_mode event, 169 enum s3c64xx_timer_mode source) 170 { 171 s3c64xx_pwm_variant.output_mask = BIT(SAMSUNG_PWM_NUM) - 1; 172 s3c64xx_pwm_variant.output_mask &= ~(BIT(event) | BIT(source)); 173 } 174 175 void __init s3c64xx_timer_init(void) 176 { 177 unsigned int timer_irqs[SAMSUNG_PWM_NUM] = { 178 IRQ_TIMER0_VIC, IRQ_TIMER1_VIC, IRQ_TIMER2_VIC, 179 IRQ_TIMER3_VIC, IRQ_TIMER4_VIC, 180 }; 181 182 samsung_pwm_clocksource_init(S3C_VA_TIMER, 183 timer_irqs, &s3c64xx_pwm_variant); 184 } 185 186 /* read cpu identification code */ 187 188 void __init s3c64xx_init_io(struct map_desc *mach_desc, int size) 189 { 190 /* initialise the io descriptors we need for initialisation */ 191 iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc)); 192 iotable_init(mach_desc, size); 193 194 /* detect cpu id */ 195 s3c64xx_init_cpu(); 196 197 s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids)); 198 199 samsung_pwm_set_platdata(&s3c64xx_pwm_variant); 200 } 201 202 static __init int s3c64xx_dev_init(void) 203 { 204 /* Not applicable when using DT. */ 205 if (of_have_populated_dt() || !soc_is_s3c64xx()) 206 return 0; 207 208 subsys_system_register(&s3c64xx_subsys, NULL); 209 return device_register(&s3c64xx_dev); 210 } 211 core_initcall(s3c64xx_dev_init); 212 213 /* 214 * setup the sources the vic should advertise resume 215 * for, even though it is not doing the wake 216 * (set_irq_wake needs to be valid) 217 */ 218 #define IRQ_VIC0_RESUME (1 << (IRQ_RTC_TIC - IRQ_VIC0_BASE)) 219 #define IRQ_VIC1_RESUME (1 << (IRQ_RTC_ALARM - IRQ_VIC1_BASE) | \ 220 1 << (IRQ_PENDN - IRQ_VIC1_BASE) | \ 221 1 << (IRQ_HSMMC0 - IRQ_VIC1_BASE) | \ 222 1 << (IRQ_HSMMC1 - IRQ_VIC1_BASE) | \ 223 1 << (IRQ_HSMMC2 - IRQ_VIC1_BASE)) 224 225 void __init s3c64xx_init_irq(u32 vic0_valid, u32 vic1_valid) 226 { 227 s3c64xx_clk_init(NULL, xtal_f, xusbxti_f, soc_is_s3c6400(), S3C_VA_SYS); 228 229 printk(KERN_DEBUG "%s: initialising interrupts\n", __func__); 230 231 /* initialise the pair of VICs */ 232 vic_init(VA_VIC0, IRQ_VIC0_BASE, vic0_valid, IRQ_VIC0_RESUME); 233 vic_init(VA_VIC1, IRQ_VIC1_BASE, vic1_valid, IRQ_VIC1_RESUME); 234 } 235 236 #define eint_offset(irq) ((irq) - IRQ_EINT(0)) 237 #define eint_irq_to_bit(irq) ((u32)(1 << eint_offset(irq))) 238 239 static inline void s3c_irq_eint_mask(struct irq_data *data) 240 { 241 u32 mask; 242 243 mask = __raw_readl(S3C64XX_EINT0MASK); 244 mask |= (u32)data->chip_data; 245 __raw_writel(mask, S3C64XX_EINT0MASK); 246 } 247 248 static void s3c_irq_eint_unmask(struct irq_data *data) 249 { 250 u32 mask; 251 252 mask = __raw_readl(S3C64XX_EINT0MASK); 253 mask &= ~((u32)data->chip_data); 254 __raw_writel(mask, S3C64XX_EINT0MASK); 255 } 256 257 static inline void s3c_irq_eint_ack(struct irq_data *data) 258 { 259 __raw_writel((u32)data->chip_data, S3C64XX_EINT0PEND); 260 } 261 262 static void s3c_irq_eint_maskack(struct irq_data *data) 263 { 264 /* compiler should in-line these */ 265 s3c_irq_eint_mask(data); 266 s3c_irq_eint_ack(data); 267 } 268 269 static int s3c_irq_eint_set_type(struct irq_data *data, unsigned int type) 270 { 271 int offs = eint_offset(data->irq); 272 int pin, pin_val; 273 int shift; 274 u32 ctrl, mask; 275 u32 newvalue = 0; 276 void __iomem *reg; 277 278 if (offs > 27) 279 return -EINVAL; 280 281 if (offs <= 15) 282 reg = S3C64XX_EINT0CON0; 283 else 284 reg = S3C64XX_EINT0CON1; 285 286 switch (type) { 287 case IRQ_TYPE_NONE: 288 printk(KERN_WARNING "No edge setting!\n"); 289 break; 290 291 case IRQ_TYPE_EDGE_RISING: 292 newvalue = S3C2410_EXTINT_RISEEDGE; 293 break; 294 295 case IRQ_TYPE_EDGE_FALLING: 296 newvalue = S3C2410_EXTINT_FALLEDGE; 297 break; 298 299 case IRQ_TYPE_EDGE_BOTH: 300 newvalue = S3C2410_EXTINT_BOTHEDGE; 301 break; 302 303 case IRQ_TYPE_LEVEL_LOW: 304 newvalue = S3C2410_EXTINT_LOWLEV; 305 break; 306 307 case IRQ_TYPE_LEVEL_HIGH: 308 newvalue = S3C2410_EXTINT_HILEV; 309 break; 310 311 default: 312 printk(KERN_ERR "No such irq type %d", type); 313 return -1; 314 } 315 316 if (offs <= 15) 317 shift = (offs / 2) * 4; 318 else 319 shift = ((offs - 16) / 2) * 4; 320 mask = 0x7 << shift; 321 322 ctrl = __raw_readl(reg); 323 ctrl &= ~mask; 324 ctrl |= newvalue << shift; 325 __raw_writel(ctrl, reg); 326 327 /* set the GPIO pin appropriately */ 328 329 if (offs < 16) { 330 pin = S3C64XX_GPN(offs); 331 pin_val = S3C_GPIO_SFN(2); 332 } else if (offs < 23) { 333 pin = S3C64XX_GPL(offs + 8 - 16); 334 pin_val = S3C_GPIO_SFN(3); 335 } else { 336 pin = S3C64XX_GPM(offs - 23); 337 pin_val = S3C_GPIO_SFN(3); 338 } 339 340 s3c_gpio_cfgpin(pin, pin_val); 341 342 return 0; 343 } 344 345 static struct irq_chip s3c_irq_eint = { 346 .name = "s3c-eint", 347 .irq_mask = s3c_irq_eint_mask, 348 .irq_unmask = s3c_irq_eint_unmask, 349 .irq_mask_ack = s3c_irq_eint_maskack, 350 .irq_ack = s3c_irq_eint_ack, 351 .irq_set_type = s3c_irq_eint_set_type, 352 .irq_set_wake = s3c_irqext_wake, 353 }; 354 355 /* s3c_irq_demux_eint 356 * 357 * This function demuxes the IRQ from the group0 external interrupts, 358 * from IRQ_EINT(0) to IRQ_EINT(27). It is designed to be inlined into 359 * the specific handlers s3c_irq_demux_eintX_Y. 360 */ 361 static inline void s3c_irq_demux_eint(unsigned int start, unsigned int end) 362 { 363 u32 status = __raw_readl(S3C64XX_EINT0PEND); 364 u32 mask = __raw_readl(S3C64XX_EINT0MASK); 365 unsigned int irq; 366 367 status &= ~mask; 368 status >>= start; 369 status &= (1 << (end - start + 1)) - 1; 370 371 for (irq = IRQ_EINT(start); irq <= IRQ_EINT(end); irq++) { 372 if (status & 1) 373 generic_handle_irq(irq); 374 375 status >>= 1; 376 } 377 } 378 379 static void s3c_irq_demux_eint0_3(struct irq_desc *desc) 380 { 381 s3c_irq_demux_eint(0, 3); 382 } 383 384 static void s3c_irq_demux_eint4_11(struct irq_desc *desc) 385 { 386 s3c_irq_demux_eint(4, 11); 387 } 388 389 static void s3c_irq_demux_eint12_19(struct irq_desc *desc) 390 { 391 s3c_irq_demux_eint(12, 19); 392 } 393 394 static void s3c_irq_demux_eint20_27(struct irq_desc *desc) 395 { 396 s3c_irq_demux_eint(20, 27); 397 } 398 399 static int __init s3c64xx_init_irq_eint(void) 400 { 401 int irq; 402 403 /* On DT-enabled systems EINTs are handled by pinctrl-s3c64xx driver. */ 404 if (of_have_populated_dt() || !soc_is_s3c64xx()) 405 return -ENODEV; 406 407 for (irq = IRQ_EINT(0); irq <= IRQ_EINT(27); irq++) { 408 irq_set_chip_and_handler(irq, &s3c_irq_eint, handle_level_irq); 409 irq_set_chip_data(irq, (void *)eint_irq_to_bit(irq)); 410 irq_clear_status_flags(irq, IRQ_NOREQUEST); 411 } 412 413 irq_set_chained_handler(IRQ_EINT0_3, s3c_irq_demux_eint0_3); 414 irq_set_chained_handler(IRQ_EINT4_11, s3c_irq_demux_eint4_11); 415 irq_set_chained_handler(IRQ_EINT12_19, s3c_irq_demux_eint12_19); 416 irq_set_chained_handler(IRQ_EINT20_27, s3c_irq_demux_eint20_27); 417 418 return 0; 419 } 420 arch_initcall(s3c64xx_init_irq_eint); 421 422 #ifndef CONFIG_COMPILE_TEST 423 #pragma message "The platform is deprecated and scheduled for removal. " \ 424 "Please reach to the maintainers of the platform " \ 425 "and linux-samsung-soc@vger.kernel.org if you still use it." \ 426 "Without such feedback, the platform will be removed after 2024." 427 #endif 428