xref: /openbmc/linux/arch/arm/mach-qcom/platsmp.c (revision b830f94f)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  *  Copyright (C) 2002 ARM Ltd.
4  *  All Rights Reserved
5  *  Copyright (c) 2010, Code Aurora Forum. All rights reserved.
6  *  Copyright (c) 2014 The Linux Foundation. All rights reserved.
7  */
8 
9 #include <linux/init.h>
10 #include <linux/errno.h>
11 #include <linux/delay.h>
12 #include <linux/device.h>
13 #include <linux/of.h>
14 #include <linux/of_address.h>
15 #include <linux/smp.h>
16 #include <linux/io.h>
17 #include <linux/qcom_scm.h>
18 
19 #include <asm/smp_plat.h>
20 
21 
22 #define VDD_SC1_ARRAY_CLAMP_GFS_CTL	0x35a0
23 #define SCSS_CPU1CORE_RESET		0x2d80
24 #define SCSS_DBG_STATUS_CORE_PWRDUP	0x2e64
25 
26 #define APCS_CPU_PWR_CTL	0x04
27 #define PLL_CLAMP		BIT(8)
28 #define CORE_PWRD_UP		BIT(7)
29 #define COREPOR_RST		BIT(5)
30 #define CORE_RST		BIT(4)
31 #define L2DT_SLP		BIT(3)
32 #define CLAMP			BIT(0)
33 
34 #define APC_PWR_GATE_CTL	0x14
35 #define BHS_CNT_SHIFT		24
36 #define LDO_PWR_DWN_SHIFT	16
37 #define LDO_BYP_SHIFT		8
38 #define BHS_SEG_SHIFT		1
39 #define BHS_EN			BIT(0)
40 
41 #define APCS_SAW2_VCTL		0x14
42 #define APCS_SAW2_2_VCTL	0x1c
43 
44 extern void secondary_startup_arm(void);
45 
46 #ifdef CONFIG_HOTPLUG_CPU
47 static void qcom_cpu_die(unsigned int cpu)
48 {
49 	wfi();
50 }
51 #endif
52 
53 static int scss_release_secondary(unsigned int cpu)
54 {
55 	struct device_node *node;
56 	void __iomem *base;
57 
58 	node = of_find_compatible_node(NULL, NULL, "qcom,gcc-msm8660");
59 	if (!node) {
60 		pr_err("%s: can't find node\n", __func__);
61 		return -ENXIO;
62 	}
63 
64 	base = of_iomap(node, 0);
65 	of_node_put(node);
66 	if (!base)
67 		return -ENOMEM;
68 
69 	writel_relaxed(0, base + VDD_SC1_ARRAY_CLAMP_GFS_CTL);
70 	writel_relaxed(0, base + SCSS_CPU1CORE_RESET);
71 	writel_relaxed(3, base + SCSS_DBG_STATUS_CORE_PWRDUP);
72 	mb();
73 	iounmap(base);
74 
75 	return 0;
76 }
77 
78 static int kpssv1_release_secondary(unsigned int cpu)
79 {
80 	int ret = 0;
81 	void __iomem *reg, *saw_reg;
82 	struct device_node *cpu_node, *acc_node, *saw_node;
83 	u32 val;
84 
85 	cpu_node = of_get_cpu_node(cpu, NULL);
86 	if (!cpu_node)
87 		return -ENODEV;
88 
89 	acc_node = of_parse_phandle(cpu_node, "qcom,acc", 0);
90 	if (!acc_node) {
91 		ret = -ENODEV;
92 		goto out_acc;
93 	}
94 
95 	saw_node = of_parse_phandle(cpu_node, "qcom,saw", 0);
96 	if (!saw_node) {
97 		ret = -ENODEV;
98 		goto out_saw;
99 	}
100 
101 	reg = of_iomap(acc_node, 0);
102 	if (!reg) {
103 		ret = -ENOMEM;
104 		goto out_acc_map;
105 	}
106 
107 	saw_reg = of_iomap(saw_node, 0);
108 	if (!saw_reg) {
109 		ret = -ENOMEM;
110 		goto out_saw_map;
111 	}
112 
113 	/* Turn on CPU rail */
114 	writel_relaxed(0xA4, saw_reg + APCS_SAW2_VCTL);
115 	mb();
116 	udelay(512);
117 
118 	/* Krait bring-up sequence */
119 	val = PLL_CLAMP | L2DT_SLP | CLAMP;
120 	writel_relaxed(val, reg + APCS_CPU_PWR_CTL);
121 	val &= ~L2DT_SLP;
122 	writel_relaxed(val, reg + APCS_CPU_PWR_CTL);
123 	mb();
124 	ndelay(300);
125 
126 	val |= COREPOR_RST;
127 	writel_relaxed(val, reg + APCS_CPU_PWR_CTL);
128 	mb();
129 	udelay(2);
130 
131 	val &= ~CLAMP;
132 	writel_relaxed(val, reg + APCS_CPU_PWR_CTL);
133 	mb();
134 	udelay(2);
135 
136 	val &= ~COREPOR_RST;
137 	writel_relaxed(val, reg + APCS_CPU_PWR_CTL);
138 	mb();
139 	udelay(100);
140 
141 	val |= CORE_PWRD_UP;
142 	writel_relaxed(val, reg + APCS_CPU_PWR_CTL);
143 	mb();
144 
145 	iounmap(saw_reg);
146 out_saw_map:
147 	iounmap(reg);
148 out_acc_map:
149 	of_node_put(saw_node);
150 out_saw:
151 	of_node_put(acc_node);
152 out_acc:
153 	of_node_put(cpu_node);
154 	return ret;
155 }
156 
157 static int kpssv2_release_secondary(unsigned int cpu)
158 {
159 	void __iomem *reg;
160 	struct device_node *cpu_node, *l2_node, *acc_node, *saw_node;
161 	void __iomem *l2_saw_base;
162 	unsigned reg_val;
163 	int ret;
164 
165 	cpu_node = of_get_cpu_node(cpu, NULL);
166 	if (!cpu_node)
167 		return -ENODEV;
168 
169 	acc_node = of_parse_phandle(cpu_node, "qcom,acc", 0);
170 	if (!acc_node) {
171 		ret = -ENODEV;
172 		goto out_acc;
173 	}
174 
175 	l2_node = of_parse_phandle(cpu_node, "next-level-cache", 0);
176 	if (!l2_node) {
177 		ret = -ENODEV;
178 		goto out_l2;
179 	}
180 
181 	saw_node = of_parse_phandle(l2_node, "qcom,saw", 0);
182 	if (!saw_node) {
183 		ret = -ENODEV;
184 		goto out_saw;
185 	}
186 
187 	reg = of_iomap(acc_node, 0);
188 	if (!reg) {
189 		ret = -ENOMEM;
190 		goto out_map;
191 	}
192 
193 	l2_saw_base = of_iomap(saw_node, 0);
194 	if (!l2_saw_base) {
195 		ret = -ENOMEM;
196 		goto out_saw_map;
197 	}
198 
199 	/* Turn on the BHS, turn off LDO Bypass and power down LDO */
200 	reg_val = (64 << BHS_CNT_SHIFT) | (0x3f << LDO_PWR_DWN_SHIFT) | BHS_EN;
201 	writel_relaxed(reg_val, reg + APC_PWR_GATE_CTL);
202 	mb();
203 	/* wait for the BHS to settle */
204 	udelay(1);
205 
206 	/* Turn on BHS segments */
207 	reg_val |= 0x3f << BHS_SEG_SHIFT;
208 	writel_relaxed(reg_val, reg + APC_PWR_GATE_CTL);
209 	mb();
210 	 /* wait for the BHS to settle */
211 	udelay(1);
212 
213 	/* Finally turn on the bypass so that BHS supplies power */
214 	reg_val |= 0x3f << LDO_BYP_SHIFT;
215 	writel_relaxed(reg_val, reg + APC_PWR_GATE_CTL);
216 
217 	/* enable max phases */
218 	writel_relaxed(0x10003, l2_saw_base + APCS_SAW2_2_VCTL);
219 	mb();
220 	udelay(50);
221 
222 	reg_val = COREPOR_RST | CLAMP;
223 	writel_relaxed(reg_val, reg + APCS_CPU_PWR_CTL);
224 	mb();
225 	udelay(2);
226 
227 	reg_val &= ~CLAMP;
228 	writel_relaxed(reg_val, reg + APCS_CPU_PWR_CTL);
229 	mb();
230 	udelay(2);
231 
232 	reg_val &= ~COREPOR_RST;
233 	writel_relaxed(reg_val, reg + APCS_CPU_PWR_CTL);
234 	mb();
235 
236 	reg_val |= CORE_PWRD_UP;
237 	writel_relaxed(reg_val, reg + APCS_CPU_PWR_CTL);
238 	mb();
239 
240 	ret = 0;
241 
242 	iounmap(l2_saw_base);
243 out_saw_map:
244 	iounmap(reg);
245 out_map:
246 	of_node_put(saw_node);
247 out_saw:
248 	of_node_put(l2_node);
249 out_l2:
250 	of_node_put(acc_node);
251 out_acc:
252 	of_node_put(cpu_node);
253 
254 	return ret;
255 }
256 
257 static DEFINE_PER_CPU(int, cold_boot_done);
258 
259 static int qcom_boot_secondary(unsigned int cpu, int (*func)(unsigned int))
260 {
261 	int ret = 0;
262 
263 	if (!per_cpu(cold_boot_done, cpu)) {
264 		ret = func(cpu);
265 		if (!ret)
266 			per_cpu(cold_boot_done, cpu) = true;
267 	}
268 
269 	/*
270 	 * Send the secondary CPU a soft interrupt, thereby causing
271 	 * the boot monitor to read the system wide flags register,
272 	 * and branch to the address found there.
273 	 */
274 	arch_send_wakeup_ipi_mask(cpumask_of(cpu));
275 
276 	return ret;
277 }
278 
279 static int msm8660_boot_secondary(unsigned int cpu, struct task_struct *idle)
280 {
281 	return qcom_boot_secondary(cpu, scss_release_secondary);
282 }
283 
284 static int kpssv1_boot_secondary(unsigned int cpu, struct task_struct *idle)
285 {
286 	return qcom_boot_secondary(cpu, kpssv1_release_secondary);
287 }
288 
289 static int kpssv2_boot_secondary(unsigned int cpu, struct task_struct *idle)
290 {
291 	return qcom_boot_secondary(cpu, kpssv2_release_secondary);
292 }
293 
294 static void __init qcom_smp_prepare_cpus(unsigned int max_cpus)
295 {
296 	int cpu;
297 
298 	if (qcom_scm_set_cold_boot_addr(secondary_startup_arm,
299 					cpu_present_mask)) {
300 		for_each_present_cpu(cpu) {
301 			if (cpu == smp_processor_id())
302 				continue;
303 			set_cpu_present(cpu, false);
304 		}
305 		pr_warn("Failed to set CPU boot address, disabling SMP\n");
306 	}
307 }
308 
309 static const struct smp_operations smp_msm8660_ops __initconst = {
310 	.smp_prepare_cpus	= qcom_smp_prepare_cpus,
311 	.smp_boot_secondary	= msm8660_boot_secondary,
312 #ifdef CONFIG_HOTPLUG_CPU
313 	.cpu_die		= qcom_cpu_die,
314 #endif
315 };
316 CPU_METHOD_OF_DECLARE(qcom_smp, "qcom,gcc-msm8660", &smp_msm8660_ops);
317 
318 static const struct smp_operations qcom_smp_kpssv1_ops __initconst = {
319 	.smp_prepare_cpus	= qcom_smp_prepare_cpus,
320 	.smp_boot_secondary	= kpssv1_boot_secondary,
321 #ifdef CONFIG_HOTPLUG_CPU
322 	.cpu_die		= qcom_cpu_die,
323 #endif
324 };
325 CPU_METHOD_OF_DECLARE(qcom_smp_kpssv1, "qcom,kpss-acc-v1", &qcom_smp_kpssv1_ops);
326 
327 static const struct smp_operations qcom_smp_kpssv2_ops __initconst = {
328 	.smp_prepare_cpus	= qcom_smp_prepare_cpus,
329 	.smp_boot_secondary	= kpssv2_boot_secondary,
330 #ifdef CONFIG_HOTPLUG_CPU
331 	.cpu_die		= qcom_cpu_die,
332 #endif
333 };
334 CPU_METHOD_OF_DECLARE(qcom_smp_kpssv2, "qcom,kpss-acc-v2", &qcom_smp_kpssv2_ops);
335