1/* 2 * PXA27x standby mode 3 * 4 * Author: David Burrage 5 * 6 * 2005 (c) MontaVista Software, Inc. This file is licensed under 7 * the terms of the GNU General Public License version 2. This program 8 * is licensed "as is" without any warranty of any kind, whether express 9 * or implied. 10 */ 11 12#include <linux/linkage.h> 13#include <asm/assembler.h> 14 15#include "pxa2xx-regs.h" 16 17 .text 18 19#ifdef CONFIG_PXA27x 20ENTRY(pxa_cpu_standby) 21 ldr r0, =PSSR 22 mov r1, #(PSSR_PH | PSSR_STS) 23 mov r2, #PWRMODE_STANDBY 24 mov r3, #UNCACHED_PHYS_0 @ Read mem context in. 25 ldr ip, [r3] 26 b 1f 27 28 .align 5 291: mcr p14, 0, r2, c7, c0, 0 @ put the system into Standby 30 str r1, [r0] @ make sure PSSR_PH/STS are clear 31 ret lr 32 33#endif 34 35#ifdef CONFIG_PXA3xx 36 37#define PXA3_MDCNFG 0x0000 38#define PXA3_MDCNFG_DMCEN (1 << 30) 39#define PXA3_DDR_HCAL 0x0060 40#define PXA3_DDR_HCAL_HCRNG 0x1f 41#define PXA3_DDR_HCAL_HCPROG (1 << 28) 42#define PXA3_DDR_HCAL_HCEN (1 << 31) 43#define PXA3_DMCIER 0x0070 44#define PXA3_DMCIER_EDLP (1 << 29) 45#define PXA3_DMCISR 0x0078 46#define PXA3_RCOMP 0x0100 47#define PXA3_RCOMP_SWEVAL (1 << 31) 48 49ENTRY(pm_enter_standby_start) 50 mov r1, #0xf6000000 @ DMEMC_REG_BASE (PXA3_MDCNFG) 51 add r1, r1, #0x00100000 52 53 /* 54 * Preload the TLB entry for accessing the dynamic memory 55 * controller registers. Note that page table lookups will 56 * fail until the dynamic memory controller has been 57 * reinitialised - and that includes MMU page table walks. 58 * This also means that only the dynamic memory controller 59 * can be reliably accessed in the code following standby. 60 */ 61 ldr r2, [r1] @ Dummy read PXA3_MDCNFG 62 63 mcr p14, 0, r0, c7, c0, 0 64 .rept 8 65 nop 66 .endr 67 68 ldr r0, [r1, #PXA3_DDR_HCAL] @ Clear (and wait for) HCEN 69 bic r0, r0, #PXA3_DDR_HCAL_HCEN 70 str r0, [r1, #PXA3_DDR_HCAL] 711: ldr r0, [r1, #PXA3_DDR_HCAL] 72 tst r0, #PXA3_DDR_HCAL_HCEN 73 bne 1b 74 75 ldr r0, [r1, #PXA3_RCOMP] @ Initiate RCOMP 76 orr r0, r0, #PXA3_RCOMP_SWEVAL 77 str r0, [r1, #PXA3_RCOMP] 78 79 mov r0, #~0 @ Clear interrupts 80 str r0, [r1, #PXA3_DMCISR] 81 82 ldr r0, [r1, #PXA3_DMCIER] @ set DMIER[EDLP] 83 orr r0, r0, #PXA3_DMCIER_EDLP 84 str r0, [r1, #PXA3_DMCIER] 85 86 ldr r0, [r1, #PXA3_DDR_HCAL] @ clear HCRNG, set HCPROG, HCEN 87 bic r0, r0, #PXA3_DDR_HCAL_HCRNG 88 orr r0, r0, #PXA3_DDR_HCAL_HCEN | PXA3_DDR_HCAL_HCPROG 89 str r0, [r1, #PXA3_DDR_HCAL] 90 911: ldr r0, [r1, #PXA3_DMCISR] 92 tst r0, #PXA3_DMCIER_EDLP 93 beq 1b 94 95 ldr r0, [r1, #PXA3_MDCNFG] @ set PXA3_MDCNFG[DMCEN] 96 orr r0, r0, #PXA3_MDCNFG_DMCEN 97 str r0, [r1, #PXA3_MDCNFG] 981: ldr r0, [r1, #PXA3_MDCNFG] 99 tst r0, #PXA3_MDCNFG_DMCEN 100 beq 1b 101 102 ldr r0, [r1, #PXA3_DDR_HCAL] @ set PXA3_DDR_HCAL[HCRNG] 103 orr r0, r0, #2 @ HCRNG 104 str r0, [r1, #PXA3_DDR_HCAL] 105 106 ldr r0, [r1, #PXA3_DMCIER] @ Clear the interrupt 107 bic r0, r0, #0x20000000 108 str r0, [r1, #PXA3_DMCIER] 109 110 ret lr 111ENTRY(pm_enter_standby_end) 112 113#endif 114