xref: /openbmc/linux/arch/arm/mach-pxa/sharpsl_pm.c (revision 726ccdba)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * Battery and Power Management code for the Sharp SL-C7xx and SL-Cxx00
4  * series of PDAs
5  *
6  * Copyright (c) 2004-2005 Richard Purdie
7  *
8  * Based on code written by Sharp for 2.4 kernels
9  */
10 
11 #undef DEBUG
12 
13 #include <linux/module.h>
14 #include <linux/kernel.h>
15 #include <linux/interrupt.h>
16 #include <linux/platform_device.h>
17 #include <linux/apm-emulation.h>
18 #include <linux/timer.h>
19 #include <linux/delay.h>
20 #include <linux/leds.h>
21 #include <linux/suspend.h>
22 #include <linux/gpio.h>
23 #include <linux/io.h>
24 
25 #include <asm/mach-types.h>
26 #include "pm.h"
27 #include "pxa2xx-regs.h"
28 #include "regs-rtc.h"
29 #include "sharpsl_pm.h"
30 
31 /*
32  * Constants
33  */
34 #define SHARPSL_CHARGE_ON_TIME_INTERVAL        (msecs_to_jiffies(1*60*1000))  /* 1 min */
35 #define SHARPSL_CHARGE_FINISH_TIME             (msecs_to_jiffies(10*60*1000)) /* 10 min */
36 #define SHARPSL_BATCHK_TIME                    (msecs_to_jiffies(15*1000))    /* 15 sec */
37 #define SHARPSL_BATCHK_TIME_SUSPEND            (60*10)                        /* 10 min */
38 
39 #define SHARPSL_WAIT_CO_TIME                   15  /* 15 sec */
40 #define SHARPSL_WAIT_DISCHARGE_ON              100 /* 100 msec */
41 #define SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP   10  /* 10 msec */
42 #define SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT   10  /* 10 msec */
43 #define SHARPSL_CHECK_BATTERY_WAIT_TIME_ACIN   10  /* 10 msec */
44 #define SHARPSL_CHARGE_WAIT_TIME               15  /* 15 msec */
45 #define SHARPSL_CHARGE_CO_CHECK_TIME           5   /* 5 msec */
46 #define SHARPSL_CHARGE_RETRY_CNT               1   /* eqv. 10 min */
47 
48 /*
49  * Prototypes
50  */
51 #ifdef CONFIG_PM
52 static int sharpsl_off_charge_battery(void);
53 static int sharpsl_check_battery_voltage(void);
54 #endif
55 static int sharpsl_check_battery_temp(void);
56 static int sharpsl_ac_check(void);
57 static int sharpsl_average_value(int ad);
58 static void sharpsl_average_clear(void);
59 static void sharpsl_charge_toggle(struct work_struct *private_);
60 static void sharpsl_battery_thread(struct work_struct *private_);
61 
62 
63 /*
64  * Variables
65  */
66 struct sharpsl_pm_status sharpsl_pm;
67 static DECLARE_DELAYED_WORK(toggle_charger, sharpsl_charge_toggle);
68 static DECLARE_DELAYED_WORK(sharpsl_bat, sharpsl_battery_thread);
69 DEFINE_LED_TRIGGER(sharpsl_charge_led_trigger);
70 
71 
72 
73 struct battery_thresh sharpsl_battery_levels_acin[] = {
74 	{ 213, 100},
75 	{ 212,  98},
76 	{ 211,  95},
77 	{ 210,  93},
78 	{ 209,  90},
79 	{ 208,  88},
80 	{ 207,  85},
81 	{ 206,  83},
82 	{ 205,  80},
83 	{ 204,  78},
84 	{ 203,  75},
85 	{ 202,  73},
86 	{ 201,  70},
87 	{ 200,  68},
88 	{ 199,  65},
89 	{ 198,  63},
90 	{ 197,  60},
91 	{ 196,  58},
92 	{ 195,  55},
93 	{ 194,  53},
94 	{ 193,  50},
95 	{ 192,  48},
96 	{ 192,  45},
97 	{ 191,  43},
98 	{ 191,  40},
99 	{ 190,  38},
100 	{ 190,  35},
101 	{ 189,  33},
102 	{ 188,  30},
103 	{ 187,  28},
104 	{ 186,  25},
105 	{ 185,  23},
106 	{ 184,  20},
107 	{ 183,  18},
108 	{ 182,  15},
109 	{ 181,  13},
110 	{ 180,  10},
111 	{ 179,   8},
112 	{ 178,   5},
113 	{   0,   0},
114 };
115 
116 struct battery_thresh sharpsl_battery_levels_noac[] = {
117 	{ 213, 100},
118 	{ 212,  98},
119 	{ 211,  95},
120 	{ 210,  93},
121 	{ 209,  90},
122 	{ 208,  88},
123 	{ 207,  85},
124 	{ 206,  83},
125 	{ 205,  80},
126 	{ 204,  78},
127 	{ 203,  75},
128 	{ 202,  73},
129 	{ 201,  70},
130 	{ 200,  68},
131 	{ 199,  65},
132 	{ 198,  63},
133 	{ 197,  60},
134 	{ 196,  58},
135 	{ 195,  55},
136 	{ 194,  53},
137 	{ 193,  50},
138 	{ 192,  48},
139 	{ 191,  45},
140 	{ 190,  43},
141 	{ 189,  40},
142 	{ 188,  38},
143 	{ 187,  35},
144 	{ 186,  33},
145 	{ 185,  30},
146 	{ 184,  28},
147 	{ 183,  25},
148 	{ 182,  23},
149 	{ 181,  20},
150 	{ 180,  18},
151 	{ 179,  15},
152 	{ 178,  13},
153 	{ 177,  10},
154 	{ 176,   8},
155 	{ 175,   5},
156 	{   0,   0},
157 };
158 
159 /* MAX1111 Commands */
160 #define MAXCTRL_PD0      (1u << 0)
161 #define MAXCTRL_PD1      (1u << 1)
162 #define MAXCTRL_SGL      (1u << 2)
163 #define MAXCTRL_UNI      (1u << 3)
164 #define MAXCTRL_SEL_SH   4
165 #define MAXCTRL_STR      (1u << 7)
166 
167 extern int max1111_read_channel(int);
168 /*
169  * Read MAX1111 ADC
170  */
171 int sharpsl_pm_pxa_read_max1111(int channel)
172 {
173 	/* max1111 accepts channels from 0-3, however,
174 	 * it is encoded from 0-7 here in the code.
175 	 */
176 	return max1111_read_channel(channel >> 1);
177 }
178 
179 static int get_percentage(int voltage)
180 {
181 	int i = sharpsl_pm.machinfo->bat_levels - 1;
182 	int bl_status = sharpsl_pm.machinfo->backlight_get_status ? sharpsl_pm.machinfo->backlight_get_status() : 0;
183 	struct battery_thresh *thresh;
184 
185 	if (sharpsl_pm.charge_mode == CHRG_ON)
186 		thresh = bl_status ? sharpsl_pm.machinfo->bat_levels_acin_bl : sharpsl_pm.machinfo->bat_levels_acin;
187 	else
188 		thresh = bl_status ? sharpsl_pm.machinfo->bat_levels_noac_bl : sharpsl_pm.machinfo->bat_levels_noac;
189 
190 	while (i > 0 && (voltage > thresh[i].voltage))
191 		i--;
192 
193 	return thresh[i].percentage;
194 }
195 
196 static int get_apm_status(int voltage)
197 {
198 	int low_thresh, high_thresh;
199 
200 	if (sharpsl_pm.charge_mode == CHRG_ON) {
201 		high_thresh = sharpsl_pm.machinfo->status_high_acin;
202 		low_thresh = sharpsl_pm.machinfo->status_low_acin;
203 	} else {
204 		high_thresh = sharpsl_pm.machinfo->status_high_noac;
205 		low_thresh = sharpsl_pm.machinfo->status_low_noac;
206 	}
207 
208 	if (voltage >= high_thresh)
209 		return APM_BATTERY_STATUS_HIGH;
210 	if (voltage >= low_thresh)
211 		return APM_BATTERY_STATUS_LOW;
212 	return APM_BATTERY_STATUS_CRITICAL;
213 }
214 
215 void sharpsl_battery_kick(void)
216 {
217 	schedule_delayed_work(&sharpsl_bat, msecs_to_jiffies(125));
218 }
219 EXPORT_SYMBOL(sharpsl_battery_kick);
220 
221 
222 static void sharpsl_battery_thread(struct work_struct *private_)
223 {
224 	int voltage, percent, apm_status, i;
225 
226 	if (!sharpsl_pm.machinfo)
227 		return;
228 
229 	sharpsl_pm.battstat.ac_status = (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN) ? APM_AC_ONLINE : APM_AC_OFFLINE);
230 
231 	/* Corgi cannot confirm when battery fully charged so periodically kick! */
232 	if (!sharpsl_pm.machinfo->batfull_irq && (sharpsl_pm.charge_mode == CHRG_ON)
233 			&& time_after(jiffies, sharpsl_pm.charge_start_time +  SHARPSL_CHARGE_ON_TIME_INTERVAL))
234 		schedule_delayed_work(&toggle_charger, 0);
235 
236 	for (i = 0; i < 5; i++) {
237 		voltage = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT);
238 		if (voltage > 0)
239 			break;
240 	}
241 	if (voltage <= 0) {
242 		voltage = sharpsl_pm.machinfo->bat_levels_noac[0].voltage;
243 		dev_warn(sharpsl_pm.dev, "Warning: Cannot read main battery!\n");
244 	}
245 
246 	voltage = sharpsl_average_value(voltage);
247 	apm_status = get_apm_status(voltage);
248 	percent = get_percentage(voltage);
249 
250 	/* At low battery voltages, the voltage has a tendency to start
251 	   creeping back up so we try to avoid this here */
252 	if ((sharpsl_pm.battstat.ac_status == APM_AC_ONLINE)
253 	    || (apm_status == APM_BATTERY_STATUS_HIGH)
254 	    || percent <= sharpsl_pm.battstat.mainbat_percent) {
255 		sharpsl_pm.battstat.mainbat_voltage = voltage;
256 		sharpsl_pm.battstat.mainbat_status = apm_status;
257 		sharpsl_pm.battstat.mainbat_percent = percent;
258 	}
259 
260 	dev_dbg(sharpsl_pm.dev, "Battery: voltage: %d, status: %d, percentage: %d, time: %ld\n", voltage,
261 			sharpsl_pm.battstat.mainbat_status, sharpsl_pm.battstat.mainbat_percent, jiffies);
262 
263 	/* Suspend if critical battery level */
264 	if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE)
265 	     && (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL)
266 	     && !(sharpsl_pm.flags & SHARPSL_APM_QUEUED)) {
267 		sharpsl_pm.flags |= SHARPSL_APM_QUEUED;
268 		dev_err(sharpsl_pm.dev, "Fatal Off\n");
269 		apm_queue_event(APM_CRITICAL_SUSPEND);
270 	}
271 
272 	schedule_delayed_work(&sharpsl_bat, SHARPSL_BATCHK_TIME);
273 }
274 
275 void sharpsl_pm_led(int val)
276 {
277 	if (val == SHARPSL_LED_ERROR) {
278 		dev_err(sharpsl_pm.dev, "Charging Error!\n");
279 	} else if (val == SHARPSL_LED_ON) {
280 		dev_dbg(sharpsl_pm.dev, "Charge LED On\n");
281 		led_trigger_event(sharpsl_charge_led_trigger, LED_FULL);
282 	} else {
283 		dev_dbg(sharpsl_pm.dev, "Charge LED Off\n");
284 		led_trigger_event(sharpsl_charge_led_trigger, LED_OFF);
285 	}
286 }
287 
288 static void sharpsl_charge_on(void)
289 {
290 	dev_dbg(sharpsl_pm.dev, "Turning Charger On\n");
291 
292 	sharpsl_pm.full_count = 0;
293 	sharpsl_pm.charge_mode = CHRG_ON;
294 	schedule_delayed_work(&toggle_charger, msecs_to_jiffies(250));
295 	schedule_delayed_work(&sharpsl_bat, msecs_to_jiffies(500));
296 }
297 
298 static void sharpsl_charge_off(void)
299 {
300 	dev_dbg(sharpsl_pm.dev, "Turning Charger Off\n");
301 
302 	sharpsl_pm.machinfo->charge(0);
303 	sharpsl_pm_led(SHARPSL_LED_OFF);
304 	sharpsl_pm.charge_mode = CHRG_OFF;
305 
306 	schedule_delayed_work(&sharpsl_bat, 0);
307 }
308 
309 static void sharpsl_charge_error(void)
310 {
311 	sharpsl_pm_led(SHARPSL_LED_ERROR);
312 	sharpsl_pm.machinfo->charge(0);
313 	sharpsl_pm.charge_mode = CHRG_ERROR;
314 }
315 
316 static void sharpsl_charge_toggle(struct work_struct *private_)
317 {
318 	dev_dbg(sharpsl_pm.dev, "Toggling Charger at time: %lx\n", jiffies);
319 
320 	if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN)) {
321 		sharpsl_charge_off();
322 		return;
323 	} else if ((sharpsl_check_battery_temp() < 0) || (sharpsl_ac_check() < 0)) {
324 		sharpsl_charge_error();
325 		return;
326 	}
327 
328 	sharpsl_pm_led(SHARPSL_LED_ON);
329 	sharpsl_pm.machinfo->charge(0);
330 	mdelay(SHARPSL_CHARGE_WAIT_TIME);
331 	sharpsl_pm.machinfo->charge(1);
332 
333 	sharpsl_pm.charge_start_time = jiffies;
334 }
335 
336 static void sharpsl_ac_timer(struct timer_list *unused)
337 {
338 	int acin = sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN);
339 
340 	dev_dbg(sharpsl_pm.dev, "AC Status: %d\n", acin);
341 
342 	sharpsl_average_clear();
343 	if (acin && (sharpsl_pm.charge_mode != CHRG_ON))
344 		sharpsl_charge_on();
345 	else if (sharpsl_pm.charge_mode == CHRG_ON)
346 		sharpsl_charge_off();
347 
348 	schedule_delayed_work(&sharpsl_bat, 0);
349 }
350 
351 
352 static irqreturn_t sharpsl_ac_isr(int irq, void *dev_id)
353 {
354 	/* Delay the event slightly to debounce */
355 	/* Must be a smaller delay than the chrg_full_isr below */
356 	mod_timer(&sharpsl_pm.ac_timer, jiffies + msecs_to_jiffies(250));
357 
358 	return IRQ_HANDLED;
359 }
360 
361 static void sharpsl_chrg_full_timer(struct timer_list *unused)
362 {
363 	dev_dbg(sharpsl_pm.dev, "Charge Full at time: %lx\n", jiffies);
364 
365 	sharpsl_pm.full_count++;
366 
367 	if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN)) {
368 		dev_dbg(sharpsl_pm.dev, "Charge Full: AC removed - stop charging!\n");
369 		if (sharpsl_pm.charge_mode == CHRG_ON)
370 			sharpsl_charge_off();
371 	} else if (sharpsl_pm.full_count < 2) {
372 		dev_dbg(sharpsl_pm.dev, "Charge Full: Count too low\n");
373 		schedule_delayed_work(&toggle_charger, 0);
374 	} else if (time_after(jiffies, sharpsl_pm.charge_start_time + SHARPSL_CHARGE_FINISH_TIME)) {
375 		dev_dbg(sharpsl_pm.dev, "Charge Full: Interrupt generated too slowly - retry.\n");
376 		schedule_delayed_work(&toggle_charger, 0);
377 	} else {
378 		sharpsl_charge_off();
379 		sharpsl_pm.charge_mode = CHRG_DONE;
380 		dev_dbg(sharpsl_pm.dev, "Charge Full: Charging Finished\n");
381 	}
382 }
383 
384 /* Charging Finished Interrupt (Not present on Corgi) */
385 /* Can trigger at the same time as an AC status change so
386    delay until after that has been processed */
387 static irqreturn_t sharpsl_chrg_full_isr(int irq, void *dev_id)
388 {
389 	if (sharpsl_pm.flags & SHARPSL_SUSPENDED)
390 		return IRQ_HANDLED;
391 
392 	/* delay until after any ac interrupt */
393 	mod_timer(&sharpsl_pm.chrg_full_timer, jiffies + msecs_to_jiffies(500));
394 
395 	return IRQ_HANDLED;
396 }
397 
398 static irqreturn_t sharpsl_fatal_isr(int irq, void *dev_id)
399 {
400 	int is_fatal = 0;
401 
402 	if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_LOCK)) {
403 		dev_err(sharpsl_pm.dev, "Battery now Unlocked! Suspending.\n");
404 		is_fatal = 1;
405 	}
406 
407 	if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_FATAL)) {
408 		dev_err(sharpsl_pm.dev, "Fatal Batt Error! Suspending.\n");
409 		is_fatal = 1;
410 	}
411 
412 	if (!(sharpsl_pm.flags & SHARPSL_APM_QUEUED) && is_fatal) {
413 		sharpsl_pm.flags |= SHARPSL_APM_QUEUED;
414 		apm_queue_event(APM_CRITICAL_SUSPEND);
415 	}
416 
417 	return IRQ_HANDLED;
418 }
419 
420 /*
421  * Maintain an average of the last 10 readings
422  */
423 #define SHARPSL_CNV_VALUE_NUM    10
424 static int sharpsl_ad_index;
425 
426 static void sharpsl_average_clear(void)
427 {
428 	sharpsl_ad_index = 0;
429 }
430 
431 static int sharpsl_average_value(int ad)
432 {
433 	int i, ad_val = 0;
434 	static int sharpsl_ad[SHARPSL_CNV_VALUE_NUM+1];
435 
436 	if (sharpsl_pm.battstat.mainbat_status != APM_BATTERY_STATUS_HIGH) {
437 		sharpsl_ad_index = 0;
438 		return ad;
439 	}
440 
441 	sharpsl_ad[sharpsl_ad_index] = ad;
442 	sharpsl_ad_index++;
443 	if (sharpsl_ad_index >= SHARPSL_CNV_VALUE_NUM) {
444 		for (i = 0; i < (SHARPSL_CNV_VALUE_NUM-1); i++)
445 			sharpsl_ad[i] = sharpsl_ad[i+1];
446 		sharpsl_ad_index = SHARPSL_CNV_VALUE_NUM - 1;
447 	}
448 	for (i = 0; i < sharpsl_ad_index; i++)
449 		ad_val += sharpsl_ad[i];
450 
451 	return ad_val / sharpsl_ad_index;
452 }
453 
454 /*
455  * Take an array of 5 integers, remove the maximum and minimum values
456  * and return the average.
457  */
458 static int get_select_val(int *val)
459 {
460 	int i, j, k, temp, sum = 0;
461 
462 	/* Find MAX val */
463 	temp = val[0];
464 	j = 0;
465 	for (i = 1; i < 5; i++) {
466 		if (temp < val[i]) {
467 			temp = val[i];
468 			j = i;
469 		}
470 	}
471 
472 	/* Find MIN val */
473 	temp = val[4];
474 	k = 4;
475 	for (i = 3; i >= 0; i--) {
476 		if (temp > val[i]) {
477 			temp = val[i];
478 			k = i;
479 		}
480 	}
481 
482 	for (i = 0; i < 5; i++)
483 		if (i != j && i != k)
484 			sum += val[i];
485 
486 	dev_dbg(sharpsl_pm.dev, "Average: %d from values: %d, %d, %d, %d, %d\n", sum/3, val[0], val[1], val[2], val[3], val[4]);
487 
488 	return sum/3;
489 }
490 
491 static int sharpsl_check_battery_temp(void)
492 {
493 	int val, i, buff[5];
494 
495 	/* Check battery temperature */
496 	for (i = 0; i < 5; i++) {
497 		mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP);
498 		sharpsl_pm.machinfo->measure_temp(1);
499 		mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP);
500 		buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_TEMP);
501 		sharpsl_pm.machinfo->measure_temp(0);
502 	}
503 
504 	val = get_select_val(buff);
505 
506 	dev_dbg(sharpsl_pm.dev, "Temperature: %d\n", val);
507 	if (val > sharpsl_pm.machinfo->charge_on_temp) {
508 		printk(KERN_WARNING "Not charging: temperature out of limits.\n");
509 		return -1;
510 	}
511 
512 	return 0;
513 }
514 
515 #ifdef CONFIG_PM
516 static int sharpsl_check_battery_voltage(void)
517 {
518 	int val, i, buff[5];
519 
520 	/* disable charge, enable discharge */
521 	sharpsl_pm.machinfo->charge(0);
522 	sharpsl_pm.machinfo->discharge(1);
523 	mdelay(SHARPSL_WAIT_DISCHARGE_ON);
524 
525 	if (sharpsl_pm.machinfo->discharge1)
526 		sharpsl_pm.machinfo->discharge1(1);
527 
528 	/* Check battery voltage */
529 	for (i = 0; i < 5; i++) {
530 		buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT);
531 		mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT);
532 	}
533 
534 	if (sharpsl_pm.machinfo->discharge1)
535 		sharpsl_pm.machinfo->discharge1(0);
536 
537 	sharpsl_pm.machinfo->discharge(0);
538 
539 	val = get_select_val(buff);
540 	dev_dbg(sharpsl_pm.dev, "Battery Voltage: %d\n", val);
541 
542 	if (val < sharpsl_pm.machinfo->charge_on_volt)
543 		return -1;
544 
545 	return 0;
546 }
547 #endif
548 
549 static int sharpsl_ac_check(void)
550 {
551 	int temp, i, buff[5];
552 
553 	for (i = 0; i < 5; i++) {
554 		buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_ACIN_VOLT);
555 		mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_ACIN);
556 	}
557 
558 	temp = get_select_val(buff);
559 	dev_dbg(sharpsl_pm.dev, "AC Voltage: %d\n", temp);
560 
561 	if ((temp > sharpsl_pm.machinfo->charge_acin_high) || (temp < sharpsl_pm.machinfo->charge_acin_low)) {
562 		dev_err(sharpsl_pm.dev, "Error: AC check failed: voltage %d.\n", temp);
563 		return -1;
564 	}
565 
566 	return 0;
567 }
568 
569 #ifdef CONFIG_PM
570 static int sharpsl_pm_suspend(struct platform_device *pdev, pm_message_t state)
571 {
572 	sharpsl_pm.flags |= SHARPSL_SUSPENDED;
573 	flush_delayed_work(&toggle_charger);
574 	flush_delayed_work(&sharpsl_bat);
575 
576 	if (sharpsl_pm.charge_mode == CHRG_ON)
577 		sharpsl_pm.flags |= SHARPSL_DO_OFFLINE_CHRG;
578 	else
579 		sharpsl_pm.flags &= ~SHARPSL_DO_OFFLINE_CHRG;
580 
581 	return 0;
582 }
583 
584 static int sharpsl_pm_resume(struct platform_device *pdev)
585 {
586 	/* Clear the reset source indicators as they break the bootloader upon reboot */
587 	RCSR = 0x0f;
588 	sharpsl_average_clear();
589 	sharpsl_pm.flags &= ~SHARPSL_APM_QUEUED;
590 	sharpsl_pm.flags &= ~SHARPSL_SUSPENDED;
591 
592 	return 0;
593 }
594 
595 static void corgi_goto_sleep(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state)
596 {
597 	dev_dbg(sharpsl_pm.dev, "Time is: %08x\n", RCNR);
598 
599 	dev_dbg(sharpsl_pm.dev, "Offline Charge Activate = %d\n", sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG);
600 	/* not charging and AC-IN! */
601 
602 	if ((sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG) && (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN))) {
603 		dev_dbg(sharpsl_pm.dev, "Activating Offline Charger...\n");
604 		sharpsl_pm.charge_mode = CHRG_OFF;
605 		sharpsl_pm.flags &= ~SHARPSL_DO_OFFLINE_CHRG;
606 		sharpsl_off_charge_battery();
607 	}
608 
609 	sharpsl_pm.machinfo->presuspend();
610 
611 	PEDR = 0xffffffff; /* clear it */
612 
613 	sharpsl_pm.flags &= ~SHARPSL_ALARM_ACTIVE;
614 	if ((sharpsl_pm.charge_mode == CHRG_ON) && ((alarm_enable && ((alarm_time - RCNR) > (SHARPSL_BATCHK_TIME_SUSPEND + 30))) || !alarm_enable)) {
615 		RTSR &= RTSR_ALE;
616 		RTAR = RCNR + SHARPSL_BATCHK_TIME_SUSPEND;
617 		dev_dbg(sharpsl_pm.dev, "Charging alarm at: %08x\n", RTAR);
618 		sharpsl_pm.flags |= SHARPSL_ALARM_ACTIVE;
619 	} else if (alarm_enable) {
620 		RTSR &= RTSR_ALE;
621 		RTAR = alarm_time;
622 		dev_dbg(sharpsl_pm.dev, "User alarm at: %08x\n", RTAR);
623 	} else {
624 		dev_dbg(sharpsl_pm.dev, "No alarms set.\n");
625 	}
626 
627 	pxa_pm_enter(state);
628 
629 	sharpsl_pm.machinfo->postsuspend();
630 
631 	dev_dbg(sharpsl_pm.dev, "Corgi woken up from suspend: %08x\n", PEDR);
632 }
633 
634 static int corgi_enter_suspend(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state)
635 {
636 	if (!sharpsl_pm.machinfo->should_wakeup(!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE) && alarm_enable)) {
637 		if (!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE)) {
638 			dev_dbg(sharpsl_pm.dev, "No user triggered wakeup events and not charging. Strange. Suspend.\n");
639 			corgi_goto_sleep(alarm_time, alarm_enable, state);
640 			return 1;
641 		}
642 		if (sharpsl_off_charge_battery()) {
643 			dev_dbg(sharpsl_pm.dev, "Charging. Suspend...\n");
644 			corgi_goto_sleep(alarm_time, alarm_enable, state);
645 			return 1;
646 		}
647 		dev_dbg(sharpsl_pm.dev, "User triggered wakeup in offline charger.\n");
648 	}
649 
650 	if ((!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_LOCK)) ||
651 	    (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_FATAL)))	{
652 		dev_err(sharpsl_pm.dev, "Fatal condition. Suspend.\n");
653 		corgi_goto_sleep(alarm_time, alarm_enable, state);
654 		return 1;
655 	}
656 
657 	return 0;
658 }
659 
660 static int corgi_pxa_pm_enter(suspend_state_t state)
661 {
662 	unsigned long alarm_time = RTAR;
663 	unsigned int alarm_status = ((RTSR & RTSR_ALE) != 0);
664 
665 	dev_dbg(sharpsl_pm.dev, "SharpSL suspending for first time.\n");
666 
667 	corgi_goto_sleep(alarm_time, alarm_status, state);
668 
669 	while (corgi_enter_suspend(alarm_time, alarm_status, state))
670 		{}
671 
672 	if (sharpsl_pm.machinfo->earlyresume)
673 		sharpsl_pm.machinfo->earlyresume();
674 
675 	dev_dbg(sharpsl_pm.dev, "SharpSL resuming...\n");
676 
677 	return 0;
678 }
679 
680 static int sharpsl_off_charge_error(void)
681 {
682 	dev_err(sharpsl_pm.dev, "Offline Charger: Error occurred.\n");
683 	sharpsl_pm.machinfo->charge(0);
684 	sharpsl_pm_led(SHARPSL_LED_ERROR);
685 	sharpsl_pm.charge_mode = CHRG_ERROR;
686 	return 1;
687 }
688 
689 /*
690  * Charging Control while suspended
691  * Return 1 - go straight to sleep
692  * Return 0 - sleep or wakeup depending on other factors
693  */
694 static int sharpsl_off_charge_battery(void)
695 {
696 	int time;
697 
698 	dev_dbg(sharpsl_pm.dev, "Charge Mode: %d\n", sharpsl_pm.charge_mode);
699 
700 	if (sharpsl_pm.charge_mode == CHRG_OFF) {
701 		dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 1\n");
702 
703 		/* AC Check */
704 		if ((sharpsl_ac_check() < 0) || (sharpsl_check_battery_temp() < 0))
705 			return sharpsl_off_charge_error();
706 
707 		/* Start Charging */
708 		sharpsl_pm_led(SHARPSL_LED_ON);
709 		sharpsl_pm.machinfo->charge(0);
710 		mdelay(SHARPSL_CHARGE_WAIT_TIME);
711 		sharpsl_pm.machinfo->charge(1);
712 
713 		sharpsl_pm.charge_mode = CHRG_ON;
714 		sharpsl_pm.full_count = 0;
715 
716 		return 1;
717 	} else if (sharpsl_pm.charge_mode != CHRG_ON) {
718 		return 1;
719 	}
720 
721 	if (sharpsl_pm.full_count == 0) {
722 		int time;
723 
724 		dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 2\n");
725 
726 		if ((sharpsl_check_battery_temp() < 0) || (sharpsl_check_battery_voltage() < 0))
727 			return sharpsl_off_charge_error();
728 
729 		sharpsl_pm.machinfo->charge(0);
730 		mdelay(SHARPSL_CHARGE_WAIT_TIME);
731 		sharpsl_pm.machinfo->charge(1);
732 		sharpsl_pm.charge_mode = CHRG_ON;
733 
734 		mdelay(SHARPSL_CHARGE_CO_CHECK_TIME);
735 
736 		time = RCNR;
737 		while (1) {
738 			/* Check if any wakeup event had occurred */
739 			if (sharpsl_pm.machinfo->charger_wakeup())
740 				return 0;
741 			/* Check for timeout */
742 			if ((RCNR - time) > SHARPSL_WAIT_CO_TIME)
743 				return 1;
744 			if (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_CHRGFULL)) {
745 				dev_dbg(sharpsl_pm.dev, "Offline Charger: Charge full occurred. Retrying to check\n");
746 				sharpsl_pm.full_count++;
747 				sharpsl_pm.machinfo->charge(0);
748 				mdelay(SHARPSL_CHARGE_WAIT_TIME);
749 				sharpsl_pm.machinfo->charge(1);
750 				return 1;
751 			}
752 		}
753 	}
754 
755 	dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 3\n");
756 
757 	mdelay(SHARPSL_CHARGE_CO_CHECK_TIME);
758 
759 	time = RCNR;
760 	while (1) {
761 		/* Check if any wakeup event had occurred */
762 		if (sharpsl_pm.machinfo->charger_wakeup())
763 			return 0;
764 		/* Check for timeout */
765 		if ((RCNR-time) > SHARPSL_WAIT_CO_TIME) {
766 			if (sharpsl_pm.full_count > SHARPSL_CHARGE_RETRY_CNT) {
767 				dev_dbg(sharpsl_pm.dev, "Offline Charger: Not charged sufficiently. Retrying.\n");
768 				sharpsl_pm.full_count = 0;
769 			}
770 			sharpsl_pm.full_count++;
771 			return 1;
772 		}
773 		if (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_CHRGFULL)) {
774 			dev_dbg(sharpsl_pm.dev, "Offline Charger: Charging complete.\n");
775 			sharpsl_pm_led(SHARPSL_LED_OFF);
776 			sharpsl_pm.machinfo->charge(0);
777 			sharpsl_pm.charge_mode = CHRG_DONE;
778 			return 1;
779 		}
780 	}
781 }
782 #else
783 #define sharpsl_pm_suspend	NULL
784 #define sharpsl_pm_resume	NULL
785 #endif
786 
787 static ssize_t battery_percentage_show(struct device *dev, struct device_attribute *attr, char *buf)
788 {
789 	return sprintf(buf, "%d\n", sharpsl_pm.battstat.mainbat_percent);
790 }
791 
792 static ssize_t battery_voltage_show(struct device *dev, struct device_attribute *attr, char *buf)
793 {
794 	return sprintf(buf, "%d\n", sharpsl_pm.battstat.mainbat_voltage);
795 }
796 
797 static DEVICE_ATTR_RO(battery_percentage);
798 static DEVICE_ATTR_RO(battery_voltage);
799 
800 extern void (*apm_get_power_status)(struct apm_power_info *);
801 
802 static void sharpsl_apm_get_power_status(struct apm_power_info *info)
803 {
804 	info->ac_line_status = sharpsl_pm.battstat.ac_status;
805 
806 	if (sharpsl_pm.charge_mode == CHRG_ON)
807 		info->battery_status = APM_BATTERY_STATUS_CHARGING;
808 	else
809 		info->battery_status = sharpsl_pm.battstat.mainbat_status;
810 
811 	info->battery_flag = (1 << info->battery_status);
812 	info->battery_life = sharpsl_pm.battstat.mainbat_percent;
813 }
814 
815 #ifdef CONFIG_PM
816 static const struct platform_suspend_ops sharpsl_pm_ops = {
817 	.prepare	= pxa_pm_prepare,
818 	.finish		= pxa_pm_finish,
819 	.enter		= corgi_pxa_pm_enter,
820 	.valid		= suspend_valid_only_mem,
821 };
822 #endif
823 
824 static int sharpsl_pm_probe(struct platform_device *pdev)
825 {
826 	int ret, irq;
827 
828 	if (!pdev->dev.platform_data)
829 		return -EINVAL;
830 
831 	sharpsl_pm.dev = &pdev->dev;
832 	sharpsl_pm.machinfo = pdev->dev.platform_data;
833 	sharpsl_pm.charge_mode = CHRG_OFF;
834 	sharpsl_pm.flags = 0;
835 
836 	timer_setup(&sharpsl_pm.ac_timer, sharpsl_ac_timer, 0);
837 
838 	timer_setup(&sharpsl_pm.chrg_full_timer, sharpsl_chrg_full_timer, 0);
839 
840 	led_trigger_register_simple("sharpsl-charge", &sharpsl_charge_led_trigger);
841 
842 	sharpsl_pm.machinfo->init();
843 
844 	gpio_request(sharpsl_pm.machinfo->gpio_acin, "AC IN");
845 	gpio_direction_input(sharpsl_pm.machinfo->gpio_acin);
846 	gpio_request(sharpsl_pm.machinfo->gpio_batfull, "Battery Full");
847 	gpio_direction_input(sharpsl_pm.machinfo->gpio_batfull);
848 	gpio_request(sharpsl_pm.machinfo->gpio_batlock, "Battery Lock");
849 	gpio_direction_input(sharpsl_pm.machinfo->gpio_batlock);
850 
851 	/* Register interrupt handlers */
852 	irq = gpio_to_irq(sharpsl_pm.machinfo->gpio_acin);
853 	if (request_irq(irq, sharpsl_ac_isr, IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, "AC Input Detect", sharpsl_ac_isr)) {
854 		dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", irq);
855 	}
856 
857 	irq = gpio_to_irq(sharpsl_pm.machinfo->gpio_batlock);
858 	if (request_irq(irq, sharpsl_fatal_isr, IRQF_TRIGGER_FALLING, "Battery Cover", sharpsl_fatal_isr)) {
859 		dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", irq);
860 	}
861 
862 	if (sharpsl_pm.machinfo->gpio_fatal) {
863 		irq = gpio_to_irq(sharpsl_pm.machinfo->gpio_fatal);
864 		if (request_irq(irq, sharpsl_fatal_isr, IRQF_TRIGGER_FALLING, "Fatal Battery", sharpsl_fatal_isr)) {
865 			dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", irq);
866 		}
867 	}
868 
869 	if (sharpsl_pm.machinfo->batfull_irq) {
870 		/* Register interrupt handler. */
871 		irq = gpio_to_irq(sharpsl_pm.machinfo->gpio_batfull);
872 		if (request_irq(irq, sharpsl_chrg_full_isr, IRQF_TRIGGER_RISING, "CO", sharpsl_chrg_full_isr)) {
873 			dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", irq);
874 		}
875 	}
876 
877 	ret = device_create_file(&pdev->dev, &dev_attr_battery_percentage);
878 	ret |= device_create_file(&pdev->dev, &dev_attr_battery_voltage);
879 	if (ret != 0)
880 		dev_warn(&pdev->dev, "Failed to register attributes (%d)\n", ret);
881 
882 	apm_get_power_status = sharpsl_apm_get_power_status;
883 
884 #ifdef CONFIG_PM
885 	suspend_set_ops(&sharpsl_pm_ops);
886 #endif
887 
888 	mod_timer(&sharpsl_pm.ac_timer, jiffies + msecs_to_jiffies(250));
889 
890 	return 0;
891 }
892 
893 static void sharpsl_pm_remove(struct platform_device *pdev)
894 {
895 	suspend_set_ops(NULL);
896 
897 	device_remove_file(&pdev->dev, &dev_attr_battery_percentage);
898 	device_remove_file(&pdev->dev, &dev_attr_battery_voltage);
899 
900 	led_trigger_unregister_simple(sharpsl_charge_led_trigger);
901 
902 	free_irq(gpio_to_irq(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr);
903 	free_irq(gpio_to_irq(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr);
904 
905 	if (sharpsl_pm.machinfo->gpio_fatal)
906 		free_irq(gpio_to_irq(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr);
907 
908 	if (sharpsl_pm.machinfo->batfull_irq)
909 		free_irq(gpio_to_irq(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr);
910 
911 	gpio_free(sharpsl_pm.machinfo->gpio_batlock);
912 	gpio_free(sharpsl_pm.machinfo->gpio_batfull);
913 	gpio_free(sharpsl_pm.machinfo->gpio_acin);
914 
915 	if (sharpsl_pm.machinfo->exit)
916 		sharpsl_pm.machinfo->exit();
917 
918 	del_timer_sync(&sharpsl_pm.chrg_full_timer);
919 	del_timer_sync(&sharpsl_pm.ac_timer);
920 }
921 
922 static struct platform_driver sharpsl_pm_driver = {
923 	.probe		= sharpsl_pm_probe,
924 	.remove_new	= sharpsl_pm_remove,
925 	.suspend	= sharpsl_pm_suspend,
926 	.resume		= sharpsl_pm_resume,
927 	.driver		= {
928 		.name		= "sharpsl-pm",
929 	},
930 };
931 
932 static int sharpsl_pm_init(void)
933 {
934 	return platform_driver_register(&sharpsl_pm_driver);
935 }
936 
937 static void sharpsl_pm_exit(void)
938 {
939 	platform_driver_unregister(&sharpsl_pm_driver);
940 }
941 
942 late_initcall(sharpsl_pm_init);
943 module_exit(sharpsl_pm_exit);
944