1 /* 2 * linux/arch/arm/mach-pxa/pxa3xx.c 3 * 4 * code specific to pxa3xx aka Monahans 5 * 6 * Copyright (C) 2006 Marvell International Ltd. 7 * 8 * 2007-09-02: eric miao <eric.miao@marvell.com> 9 * initial version 10 * 11 * This program is free software; you can redistribute it and/or modify 12 * it under the terms of the GNU General Public License version 2 as 13 * published by the Free Software Foundation. 14 */ 15 16 #include <linux/module.h> 17 #include <linux/kernel.h> 18 #include <linux/init.h> 19 #include <linux/pm.h> 20 #include <linux/platform_device.h> 21 #include <linux/irq.h> 22 #include <linux/io.h> 23 #include <linux/sysdev.h> 24 25 #include <mach/hardware.h> 26 #include <mach/gpio.h> 27 #include <mach/pxa3xx-regs.h> 28 #include <mach/reset.h> 29 #include <mach/ohci.h> 30 #include <mach/pm.h> 31 #include <mach/dma.h> 32 #include <mach/ssp.h> 33 #include <mach/i2c.h> 34 35 #include "generic.h" 36 #include "devices.h" 37 #include "clock.h" 38 39 /* Crystal clock: 13MHz */ 40 #define BASE_CLK 13000000 41 42 /* Ring Oscillator Clock: 60MHz */ 43 #define RO_CLK 60000000 44 45 #define ACCR_D0CS (1 << 26) 46 #define ACCR_PCCE (1 << 11) 47 48 /* crystal frequency to static memory controller multiplier (SMCFS) */ 49 static unsigned char smcfs_mult[8] = { 6, 0, 8, 0, 0, 16, }; 50 51 /* crystal frequency to HSIO bus frequency multiplier (HSS) */ 52 static unsigned char hss_mult[4] = { 8, 12, 16, 0 }; 53 54 /* 55 * Get the clock frequency as reflected by CCSR and the turbo flag. 56 * We assume these values have been applied via a fcs. 57 * If info is not 0 we also display the current settings. 58 */ 59 unsigned int pxa3xx_get_clk_frequency_khz(int info) 60 { 61 unsigned long acsr, xclkcfg; 62 unsigned int t, xl, xn, hss, ro, XL, XN, CLK, HSS; 63 64 /* Read XCLKCFG register turbo bit */ 65 __asm__ __volatile__("mrc\tp14, 0, %0, c6, c0, 0" : "=r"(xclkcfg)); 66 t = xclkcfg & 0x1; 67 68 acsr = ACSR; 69 70 xl = acsr & 0x1f; 71 xn = (acsr >> 8) & 0x7; 72 hss = (acsr >> 14) & 0x3; 73 74 XL = xl * BASE_CLK; 75 XN = xn * XL; 76 77 ro = acsr & ACCR_D0CS; 78 79 CLK = (ro) ? RO_CLK : ((t) ? XN : XL); 80 HSS = (ro) ? RO_CLK : hss_mult[hss] * BASE_CLK; 81 82 if (info) { 83 pr_info("RO Mode clock: %d.%02dMHz (%sactive)\n", 84 RO_CLK / 1000000, (RO_CLK % 1000000) / 10000, 85 (ro) ? "" : "in"); 86 pr_info("Run Mode clock: %d.%02dMHz (*%d)\n", 87 XL / 1000000, (XL % 1000000) / 10000, xl); 88 pr_info("Turbo Mode clock: %d.%02dMHz (*%d, %sactive)\n", 89 XN / 1000000, (XN % 1000000) / 10000, xn, 90 (t) ? "" : "in"); 91 pr_info("HSIO bus clock: %d.%02dMHz\n", 92 HSS / 1000000, (HSS % 1000000) / 10000); 93 } 94 95 return CLK / 1000; 96 } 97 98 /* 99 * Return the current static memory controller clock frequency 100 * in units of 10kHz 101 */ 102 unsigned int pxa3xx_get_memclk_frequency_10khz(void) 103 { 104 unsigned long acsr; 105 unsigned int smcfs, clk = 0; 106 107 acsr = ACSR; 108 109 smcfs = (acsr >> 23) & 0x7; 110 clk = (acsr & ACCR_D0CS) ? RO_CLK : smcfs_mult[smcfs] * BASE_CLK; 111 112 return (clk / 10000); 113 } 114 115 void pxa3xx_clear_reset_status(unsigned int mask) 116 { 117 /* RESET_STATUS_* has a 1:1 mapping with ARSR */ 118 ARSR = mask; 119 } 120 121 /* 122 * Return the current AC97 clock frequency. 123 */ 124 static unsigned long clk_pxa3xx_ac97_getrate(struct clk *clk) 125 { 126 unsigned long rate = 312000000; 127 unsigned long ac97_div; 128 129 ac97_div = AC97_DIV; 130 131 /* This may loose precision for some rates but won't for the 132 * standard 24.576MHz. 133 */ 134 rate /= (ac97_div >> 12) & 0x7fff; 135 rate *= (ac97_div & 0xfff); 136 137 return rate; 138 } 139 140 /* 141 * Return the current HSIO bus clock frequency 142 */ 143 static unsigned long clk_pxa3xx_hsio_getrate(struct clk *clk) 144 { 145 unsigned long acsr; 146 unsigned int hss, hsio_clk; 147 148 acsr = ACSR; 149 150 hss = (acsr >> 14) & 0x3; 151 hsio_clk = (acsr & ACCR_D0CS) ? RO_CLK : hss_mult[hss] * BASE_CLK; 152 153 return hsio_clk; 154 } 155 156 void clk_pxa3xx_cken_enable(struct clk *clk) 157 { 158 unsigned long mask = 1ul << (clk->cken & 0x1f); 159 160 if (clk->cken < 32) 161 CKENA |= mask; 162 else 163 CKENB |= mask; 164 } 165 166 void clk_pxa3xx_cken_disable(struct clk *clk) 167 { 168 unsigned long mask = 1ul << (clk->cken & 0x1f); 169 170 if (clk->cken < 32) 171 CKENA &= ~mask; 172 else 173 CKENB &= ~mask; 174 } 175 176 const struct clkops clk_pxa3xx_cken_ops = { 177 .enable = clk_pxa3xx_cken_enable, 178 .disable = clk_pxa3xx_cken_disable, 179 }; 180 181 static const struct clkops clk_pxa3xx_hsio_ops = { 182 .enable = clk_pxa3xx_cken_enable, 183 .disable = clk_pxa3xx_cken_disable, 184 .getrate = clk_pxa3xx_hsio_getrate, 185 }; 186 187 static const struct clkops clk_pxa3xx_ac97_ops = { 188 .enable = clk_pxa3xx_cken_enable, 189 .disable = clk_pxa3xx_cken_disable, 190 .getrate = clk_pxa3xx_ac97_getrate, 191 }; 192 193 static void clk_pout_enable(struct clk *clk) 194 { 195 OSCC |= OSCC_PEN; 196 } 197 198 static void clk_pout_disable(struct clk *clk) 199 { 200 OSCC &= ~OSCC_PEN; 201 } 202 203 static const struct clkops clk_pout_ops = { 204 .enable = clk_pout_enable, 205 .disable = clk_pout_disable, 206 }; 207 208 static void clk_dummy_enable(struct clk *clk) 209 { 210 } 211 212 static void clk_dummy_disable(struct clk *clk) 213 { 214 } 215 216 static const struct clkops clk_dummy_ops = { 217 .enable = clk_dummy_enable, 218 .disable = clk_dummy_disable, 219 }; 220 221 static struct clk clk_pxa3xx_pout = { 222 .ops = &clk_pout_ops, 223 .rate = 13000000, 224 .delay = 70, 225 }; 226 227 static struct clk clk_dummy = { 228 .ops = &clk_dummy_ops, 229 }; 230 231 static DEFINE_PXA3_CK(pxa3xx_lcd, LCD, &clk_pxa3xx_hsio_ops); 232 static DEFINE_PXA3_CK(pxa3xx_camera, CAMERA, &clk_pxa3xx_hsio_ops); 233 static DEFINE_PXA3_CK(pxa3xx_ac97, AC97, &clk_pxa3xx_ac97_ops); 234 static DEFINE_PXA3_CKEN(pxa3xx_ffuart, FFUART, 14857000, 1); 235 static DEFINE_PXA3_CKEN(pxa3xx_btuart, BTUART, 14857000, 1); 236 static DEFINE_PXA3_CKEN(pxa3xx_stuart, STUART, 14857000, 1); 237 static DEFINE_PXA3_CKEN(pxa3xx_i2c, I2C, 32842000, 0); 238 static DEFINE_PXA3_CKEN(pxa3xx_udc, UDC, 48000000, 5); 239 static DEFINE_PXA3_CKEN(pxa3xx_usbh, USBH, 48000000, 0); 240 static DEFINE_PXA3_CKEN(pxa3xx_keypad, KEYPAD, 32768, 0); 241 static DEFINE_PXA3_CKEN(pxa3xx_ssp1, SSP1, 13000000, 0); 242 static DEFINE_PXA3_CKEN(pxa3xx_ssp2, SSP2, 13000000, 0); 243 static DEFINE_PXA3_CKEN(pxa3xx_ssp3, SSP3, 13000000, 0); 244 static DEFINE_PXA3_CKEN(pxa3xx_ssp4, SSP4, 13000000, 0); 245 static DEFINE_PXA3_CKEN(pxa3xx_pwm0, PWM0, 13000000, 0); 246 static DEFINE_PXA3_CKEN(pxa3xx_pwm1, PWM1, 13000000, 0); 247 static DEFINE_PXA3_CKEN(pxa3xx_mmc1, MMC1, 19500000, 0); 248 static DEFINE_PXA3_CKEN(pxa3xx_mmc2, MMC2, 19500000, 0); 249 250 static struct clk_lookup pxa3xx_clkregs[] = { 251 INIT_CLKREG(&clk_pxa3xx_pout, NULL, "CLK_POUT"), 252 /* Power I2C clock is always on */ 253 INIT_CLKREG(&clk_dummy, "pxa2xx-i2c.1", NULL), 254 INIT_CLKREG(&clk_pxa3xx_lcd, "pxa2xx-fb", NULL), 255 INIT_CLKREG(&clk_pxa3xx_camera, NULL, "CAMCLK"), 256 INIT_CLKREG(&clk_pxa3xx_ac97, NULL, "AC97CLK"), 257 INIT_CLKREG(&clk_pxa3xx_ffuart, "pxa2xx-uart.0", NULL), 258 INIT_CLKREG(&clk_pxa3xx_btuart, "pxa2xx-uart.1", NULL), 259 INIT_CLKREG(&clk_pxa3xx_stuart, "pxa2xx-uart.2", NULL), 260 INIT_CLKREG(&clk_pxa3xx_stuart, "pxa2xx-ir", "UARTCLK"), 261 INIT_CLKREG(&clk_pxa3xx_i2c, "pxa2xx-i2c.0", NULL), 262 INIT_CLKREG(&clk_pxa3xx_udc, "pxa27x-udc", NULL), 263 INIT_CLKREG(&clk_pxa3xx_usbh, "pxa27x-ohci", NULL), 264 INIT_CLKREG(&clk_pxa3xx_keypad, "pxa27x-keypad", NULL), 265 INIT_CLKREG(&clk_pxa3xx_ssp1, "pxa27x-ssp.0", NULL), 266 INIT_CLKREG(&clk_pxa3xx_ssp2, "pxa27x-ssp.1", NULL), 267 INIT_CLKREG(&clk_pxa3xx_ssp3, "pxa27x-ssp.2", NULL), 268 INIT_CLKREG(&clk_pxa3xx_ssp4, "pxa27x-ssp.3", NULL), 269 INIT_CLKREG(&clk_pxa3xx_pwm0, "pxa27x-pwm.0", NULL), 270 INIT_CLKREG(&clk_pxa3xx_pwm1, "pxa27x-pwm.1", NULL), 271 INIT_CLKREG(&clk_pxa3xx_mmc1, "pxa2xx-mci.0", NULL), 272 INIT_CLKREG(&clk_pxa3xx_mmc2, "pxa2xx-mci.1", NULL), 273 }; 274 275 #ifdef CONFIG_PM 276 277 #define ISRAM_START 0x5c000000 278 #define ISRAM_SIZE SZ_256K 279 280 static void __iomem *sram; 281 static unsigned long wakeup_src; 282 283 #define SAVE(x) sleep_save[SLEEP_SAVE_##x] = x 284 #define RESTORE(x) x = sleep_save[SLEEP_SAVE_##x] 285 286 enum { SLEEP_SAVE_CKENA, 287 SLEEP_SAVE_CKENB, 288 SLEEP_SAVE_ACCR, 289 290 SLEEP_SAVE_COUNT, 291 }; 292 293 static void pxa3xx_cpu_pm_save(unsigned long *sleep_save) 294 { 295 SAVE(CKENA); 296 SAVE(CKENB); 297 SAVE(ACCR); 298 } 299 300 static void pxa3xx_cpu_pm_restore(unsigned long *sleep_save) 301 { 302 RESTORE(ACCR); 303 RESTORE(CKENA); 304 RESTORE(CKENB); 305 } 306 307 /* 308 * Enter a standby mode (S0D1C2 or S0D2C2). Upon wakeup, the dynamic 309 * memory controller has to be reinitialised, so we place some code 310 * in the SRAM to perform this function. 311 * 312 * We disable FIQs across the standby - otherwise, we might receive a 313 * FIQ while the SDRAM is unavailable. 314 */ 315 static void pxa3xx_cpu_standby(unsigned int pwrmode) 316 { 317 extern const char pm_enter_standby_start[], pm_enter_standby_end[]; 318 void (*fn)(unsigned int) = (void __force *)(sram + 0x8000); 319 320 memcpy_toio(sram + 0x8000, pm_enter_standby_start, 321 pm_enter_standby_end - pm_enter_standby_start); 322 323 AD2D0SR = ~0; 324 AD2D1SR = ~0; 325 AD2D0ER = wakeup_src; 326 AD2D1ER = 0; 327 ASCR = ASCR; 328 ARSR = ARSR; 329 330 local_fiq_disable(); 331 fn(pwrmode); 332 local_fiq_enable(); 333 334 AD2D0ER = 0; 335 AD2D1ER = 0; 336 } 337 338 /* 339 * NOTE: currently, the OBM (OEM Boot Module) binary comes along with 340 * PXA3xx development kits assumes that the resuming process continues 341 * with the address stored within the first 4 bytes of SDRAM. The PSPR 342 * register is used privately by BootROM and OBM, and _must_ be set to 343 * 0x5c014000 for the moment. 344 */ 345 static void pxa3xx_cpu_pm_suspend(void) 346 { 347 volatile unsigned long *p = (volatile void *)0xc0000000; 348 unsigned long saved_data = *p; 349 350 extern void pxa3xx_cpu_suspend(void); 351 extern void pxa3xx_cpu_resume(void); 352 353 /* resuming from D2 requires the HSIO2/BOOT/TPM clocks enabled */ 354 CKENA |= (1 << CKEN_BOOT) | (1 << CKEN_TPM); 355 CKENB |= 1 << (CKEN_HSIO2 & 0x1f); 356 357 /* clear and setup wakeup source */ 358 AD3SR = ~0; 359 AD3ER = wakeup_src; 360 ASCR = ASCR; 361 ARSR = ARSR; 362 363 PCFR |= (1u << 13); /* L1_DIS */ 364 PCFR &= ~((1u << 12) | (1u << 1)); /* L0_EN | SL_ROD */ 365 366 PSPR = 0x5c014000; 367 368 /* overwrite with the resume address */ 369 *p = virt_to_phys(pxa3xx_cpu_resume); 370 371 pxa3xx_cpu_suspend(); 372 373 *p = saved_data; 374 375 AD3ER = 0; 376 } 377 378 static void pxa3xx_cpu_pm_enter(suspend_state_t state) 379 { 380 /* 381 * Don't sleep if no wakeup sources are defined 382 */ 383 if (wakeup_src == 0) { 384 printk(KERN_ERR "Not suspending: no wakeup sources\n"); 385 return; 386 } 387 388 switch (state) { 389 case PM_SUSPEND_STANDBY: 390 pxa3xx_cpu_standby(PXA3xx_PM_S0D2C2); 391 break; 392 393 case PM_SUSPEND_MEM: 394 pxa3xx_cpu_pm_suspend(); 395 break; 396 } 397 } 398 399 static int pxa3xx_cpu_pm_valid(suspend_state_t state) 400 { 401 return state == PM_SUSPEND_MEM || state == PM_SUSPEND_STANDBY; 402 } 403 404 static struct pxa_cpu_pm_fns pxa3xx_cpu_pm_fns = { 405 .save_count = SLEEP_SAVE_COUNT, 406 .save = pxa3xx_cpu_pm_save, 407 .restore = pxa3xx_cpu_pm_restore, 408 .valid = pxa3xx_cpu_pm_valid, 409 .enter = pxa3xx_cpu_pm_enter, 410 }; 411 412 static void __init pxa3xx_init_pm(void) 413 { 414 sram = ioremap(ISRAM_START, ISRAM_SIZE); 415 if (!sram) { 416 printk(KERN_ERR "Unable to map ISRAM: disabling standby/suspend\n"); 417 return; 418 } 419 420 /* 421 * Since we copy wakeup code into the SRAM, we need to ensure 422 * that it is preserved over the low power modes. Note: bit 8 423 * is undocumented in the developer manual, but must be set. 424 */ 425 AD1R |= ADXR_L2 | ADXR_R0; 426 AD2R |= ADXR_L2 | ADXR_R0; 427 AD3R |= ADXR_L2 | ADXR_R0; 428 429 /* 430 * Clear the resume enable registers. 431 */ 432 AD1D0ER = 0; 433 AD2D0ER = 0; 434 AD2D1ER = 0; 435 AD3ER = 0; 436 437 pxa_cpu_pm_fns = &pxa3xx_cpu_pm_fns; 438 } 439 440 static int pxa3xx_set_wake(unsigned int irq, unsigned int on) 441 { 442 unsigned long flags, mask = 0; 443 444 switch (irq) { 445 case IRQ_SSP3: 446 mask = ADXER_MFP_WSSP3; 447 break; 448 case IRQ_MSL: 449 mask = ADXER_WMSL0; 450 break; 451 case IRQ_USBH2: 452 case IRQ_USBH1: 453 mask = ADXER_WUSBH; 454 break; 455 case IRQ_KEYPAD: 456 mask = ADXER_WKP; 457 break; 458 case IRQ_AC97: 459 mask = ADXER_MFP_WAC97; 460 break; 461 case IRQ_USIM: 462 mask = ADXER_WUSIM0; 463 break; 464 case IRQ_SSP2: 465 mask = ADXER_MFP_WSSP2; 466 break; 467 case IRQ_I2C: 468 mask = ADXER_MFP_WI2C; 469 break; 470 case IRQ_STUART: 471 mask = ADXER_MFP_WUART3; 472 break; 473 case IRQ_BTUART: 474 mask = ADXER_MFP_WUART2; 475 break; 476 case IRQ_FFUART: 477 mask = ADXER_MFP_WUART1; 478 break; 479 case IRQ_MMC: 480 mask = ADXER_MFP_WMMC1; 481 break; 482 case IRQ_SSP: 483 mask = ADXER_MFP_WSSP1; 484 break; 485 case IRQ_RTCAlrm: 486 mask = ADXER_WRTC; 487 break; 488 case IRQ_SSP4: 489 mask = ADXER_MFP_WSSP4; 490 break; 491 case IRQ_TSI: 492 mask = ADXER_WTSI; 493 break; 494 case IRQ_USIM2: 495 mask = ADXER_WUSIM1; 496 break; 497 case IRQ_MMC2: 498 mask = ADXER_MFP_WMMC2; 499 break; 500 case IRQ_NAND: 501 mask = ADXER_MFP_WFLASH; 502 break; 503 case IRQ_USB2: 504 mask = ADXER_WUSB2; 505 break; 506 case IRQ_WAKEUP0: 507 mask = ADXER_WEXTWAKE0; 508 break; 509 case IRQ_WAKEUP1: 510 mask = ADXER_WEXTWAKE1; 511 break; 512 case IRQ_MMC3: 513 mask = ADXER_MFP_GEN12; 514 break; 515 default: 516 return -EINVAL; 517 } 518 519 local_irq_save(flags); 520 if (on) 521 wakeup_src |= mask; 522 else 523 wakeup_src &= ~mask; 524 local_irq_restore(flags); 525 526 return 0; 527 } 528 #else 529 static inline void pxa3xx_init_pm(void) {} 530 #define pxa3xx_set_wake NULL 531 #endif 532 533 void __init pxa3xx_init_irq(void) 534 { 535 /* enable CP6 access */ 536 u32 value; 537 __asm__ __volatile__("mrc p15, 0, %0, c15, c1, 0\n": "=r"(value)); 538 value |= (1 << 6); 539 __asm__ __volatile__("mcr p15, 0, %0, c15, c1, 0\n": :"r"(value)); 540 541 pxa_init_irq(56, pxa3xx_set_wake); 542 pxa_init_gpio(IRQ_GPIO_2_x, 2, 127, NULL); 543 } 544 545 /* 546 * device registration specific to PXA3xx. 547 */ 548 549 void __init pxa3xx_set_i2c_power_info(struct i2c_pxa_platform_data *info) 550 { 551 pxa_register_device(&pxa3xx_device_i2c_power, info); 552 } 553 554 static struct platform_device *devices[] __initdata = { 555 /* &pxa_device_udc, The UDC driver is PXA25x only */ 556 &pxa_device_ffuart, 557 &pxa_device_btuart, 558 &pxa_device_stuart, 559 &pxa_device_i2s, 560 &sa1100_device_rtc, 561 &pxa_device_rtc, 562 &pxa27x_device_ssp1, 563 &pxa27x_device_ssp2, 564 &pxa27x_device_ssp3, 565 &pxa3xx_device_ssp4, 566 &pxa27x_device_pwm0, 567 &pxa27x_device_pwm1, 568 }; 569 570 static struct sys_device pxa3xx_sysdev[] = { 571 { 572 .cls = &pxa_irq_sysclass, 573 }, { 574 .cls = &pxa3xx_mfp_sysclass, 575 }, { 576 .cls = &pxa_gpio_sysclass, 577 }, 578 }; 579 580 static int __init pxa3xx_init(void) 581 { 582 int i, ret = 0; 583 584 if (cpu_is_pxa3xx()) { 585 586 reset_status = ARSR; 587 588 /* 589 * clear RDH bit every time after reset 590 * 591 * Note: the last 3 bits DxS are write-1-to-clear so carefully 592 * preserve them here in case they will be referenced later 593 */ 594 ASCR &= ~(ASCR_RDH | ASCR_D1S | ASCR_D2S | ASCR_D3S); 595 596 clks_register(pxa3xx_clkregs, ARRAY_SIZE(pxa3xx_clkregs)); 597 598 if ((ret = pxa_init_dma(IRQ_DMA, 32))) 599 return ret; 600 601 pxa3xx_init_pm(); 602 603 for (i = 0; i < ARRAY_SIZE(pxa3xx_sysdev); i++) { 604 ret = sysdev_register(&pxa3xx_sysdev[i]); 605 if (ret) 606 pr_err("failed to register sysdev[%d]\n", i); 607 } 608 609 ret = platform_add_devices(devices, ARRAY_SIZE(devices)); 610 } 611 612 return ret; 613 } 614 615 postcore_initcall(pxa3xx_init); 616