1 /*
2  * QNAP TS-x09 Boards common functions
3  *
4  * Maintainers: Lennert Buytenhek <buytenh@marvell.com>
5  *		Byron Bradley <byron.bbradley@gmail.com>
6  *
7  * This program is free software; you can redistribute it and/or
8  * modify it under the terms of the GNU General Public License
9  * as published by the Free Software Foundation; either version
10  * 2 of the License, or (at your option) any later version.
11  */
12 
13 #include <linux/kernel.h>
14 #include <linux/pci.h>
15 #include <linux/mv643xx_eth.h>
16 #include <linux/timex.h>
17 #include <linux/serial_reg.h>
18 #include <mach/orion5x.h>
19 #include "tsx09-common.h"
20 #include "common.h"
21 
22 /*****************************************************************************
23  * QNAP TS-x09 specific power off method via UART1-attached PIC
24  ****************************************************************************/
25 
26 #define UART1_REG(x)	(UART1_VIRT_BASE + ((UART_##x) << 2))
27 
28 void qnap_tsx09_power_off(void)
29 {
30 	/* 19200 baud divisor */
31 	const unsigned divisor = ((orion5x_tclk + (8 * 19200)) / (16 * 19200));
32 
33 	pr_info("%s: triggering power-off...\n", __func__);
34 
35 	/* hijack uart1 and reset into sane state (19200,8n1) */
36 	writel(0x83, UART1_REG(LCR));
37 	writel(divisor & 0xff, UART1_REG(DLL));
38 	writel((divisor >> 8) & 0xff, UART1_REG(DLM));
39 	writel(0x03, UART1_REG(LCR));
40 	writel(0x00, UART1_REG(IER));
41 	writel(0x00, UART1_REG(FCR));
42 	writel(0x00, UART1_REG(MCR));
43 
44 	/* send the power-off command 'A' to PIC */
45 	writel('A', UART1_REG(TX));
46 }
47 
48 /*****************************************************************************
49  * Ethernet
50  ****************************************************************************/
51 
52 struct mv643xx_eth_platform_data qnap_tsx09_eth_data = {
53 	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
54 };
55 
56 static int __init qnap_tsx09_parse_hex_nibble(char n)
57 {
58 	if (n >= '0' && n <= '9')
59 		return n - '0';
60 
61 	if (n >= 'A' && n <= 'F')
62 		return n - 'A' + 10;
63 
64 	if (n >= 'a' && n <= 'f')
65 		return n - 'a' + 10;
66 
67 	return -1;
68 }
69 
70 static int __init qnap_tsx09_parse_hex_byte(const char *b)
71 {
72 	int hi;
73 	int lo;
74 
75 	hi = qnap_tsx09_parse_hex_nibble(b[0]);
76 	lo = qnap_tsx09_parse_hex_nibble(b[1]);
77 
78 	if (hi < 0 || lo < 0)
79 		return -1;
80 
81 	return (hi << 4) | lo;
82 }
83 
84 static int __init qnap_tsx09_check_mac_addr(const char *addr_str)
85 {
86 	u_int8_t addr[6];
87 	int i;
88 
89 	for (i = 0; i < 6; i++) {
90 		int byte;
91 
92 		/*
93 		 * Enforce "xx:xx:xx:xx:xx:xx\n" format.
94 		 */
95 		if (addr_str[(i * 3) + 2] != ((i < 5) ? ':' : '\n'))
96 			return -1;
97 
98 		byte = qnap_tsx09_parse_hex_byte(addr_str + (i * 3));
99 		if (byte < 0)
100 			return -1;
101 		addr[i] = byte;
102 	}
103 
104 	printk(KERN_INFO "tsx09: found ethernet mac address ");
105 	for (i = 0; i < 6; i++)
106 		printk("%.2x%s", addr[i], (i < 5) ? ":" : ".\n");
107 
108 	memcpy(qnap_tsx09_eth_data.mac_addr, addr, 6);
109 
110 	return 0;
111 }
112 
113 /*
114  * The 'NAS Config' flash partition has an ext2 filesystem which
115  * contains a file that has the ethernet MAC address in plain text
116  * (format "xx:xx:xx:xx:xx:xx\n").
117  */
118 void __init qnap_tsx09_find_mac_addr(u32 mem_base, u32 size)
119 {
120 	unsigned long addr;
121 
122 	for (addr = mem_base; addr < (mem_base + size); addr += 1024) {
123 		char *nor_page;
124 		int ret = 0;
125 
126 		nor_page = ioremap(addr, 1024);
127 		if (nor_page != NULL) {
128 			ret = qnap_tsx09_check_mac_addr(nor_page);
129 			iounmap(nor_page);
130 		}
131 
132 		if (ret == 0)
133 			break;
134 	}
135 }
136