1 /* 2 * linux/arch/arm/mach-omap2/usb-tusb6010.c 3 * 4 * Copyright (C) 2006 Nokia Corporation 5 * 6 * This program is free software; you can redistribute it and/or modify 7 * it under the terms of the GNU General Public License version 2 as 8 * published by the Free Software Foundation. 9 */ 10 11 #include <linux/types.h> 12 #include <linux/errno.h> 13 #include <linux/delay.h> 14 #include <linux/platform_device.h> 15 #include <linux/gpio.h> 16 17 #include <linux/usb/musb.h> 18 19 #include <mach/gpmc.h> 20 #include <mach/mux.h> 21 22 23 static u8 async_cs, sync_cs; 24 static unsigned refclk_psec; 25 26 27 /* t2_ps, when quantized to fclk units, must happen no earlier than 28 * the clock after after t1_NS. 29 * 30 * Return a possibly updated value of t2_ps, converted to nsec. 31 */ 32 static unsigned 33 next_clk(unsigned t1_NS, unsigned t2_ps, unsigned fclk_ps) 34 { 35 unsigned t1_ps = t1_NS * 1000; 36 unsigned t1_f, t2_f; 37 38 if ((t1_ps + fclk_ps) < t2_ps) 39 return t2_ps / 1000; 40 41 t1_f = (t1_ps + fclk_ps - 1) / fclk_ps; 42 t2_f = (t2_ps + fclk_ps - 1) / fclk_ps; 43 44 if (t1_f >= t2_f) 45 t2_f = t1_f + 1; 46 47 return (t2_f * fclk_ps) / 1000; 48 } 49 50 /* NOTE: timings are from tusb 6010 datasheet Rev 1.8, 12-Sept 2006 */ 51 52 static int tusb_set_async_mode(unsigned sysclk_ps, unsigned fclk_ps) 53 { 54 struct gpmc_timings t; 55 unsigned t_acsnh_advnh = sysclk_ps + 3000; 56 unsigned tmp; 57 58 memset(&t, 0, sizeof(t)); 59 60 /* CS_ON = t_acsnh_acsnl */ 61 t.cs_on = 8; 62 /* ADV_ON = t_acsnh_advnh - t_advn */ 63 t.adv_on = next_clk(t.cs_on, t_acsnh_advnh - 7000, fclk_ps); 64 65 /* 66 * READ ... from omap2420 TRM fig 12-13 67 */ 68 69 /* ADV_RD_OFF = t_acsnh_advnh */ 70 t.adv_rd_off = next_clk(t.adv_on, t_acsnh_advnh, fclk_ps); 71 72 /* OE_ON = t_acsnh_advnh + t_advn_oen (then wait for nRDY) */ 73 t.oe_on = next_clk(t.adv_on, t_acsnh_advnh + 1000, fclk_ps); 74 75 /* ACCESS = counters continue only after nRDY */ 76 tmp = t.oe_on * 1000 + 300; 77 t.access = next_clk(t.oe_on, tmp, fclk_ps); 78 79 /* OE_OFF = after data gets sampled */ 80 tmp = t.access * 1000; 81 t.oe_off = next_clk(t.access, tmp, fclk_ps); 82 83 t.cs_rd_off = t.oe_off; 84 85 tmp = t.cs_rd_off * 1000 + 7000 /* t_acsn_rdy_z */; 86 t.rd_cycle = next_clk(t.cs_rd_off, tmp, fclk_ps); 87 88 /* 89 * WRITE ... from omap2420 TRM fig 12-15 90 */ 91 92 /* ADV_WR_OFF = t_acsnh_advnh */ 93 t.adv_wr_off = t.adv_rd_off; 94 95 /* WE_ON = t_acsnh_advnh + t_advn_wen (then wait for nRDY) */ 96 t.we_on = next_clk(t.adv_wr_off, t_acsnh_advnh + 1000, fclk_ps); 97 98 /* WE_OFF = after data gets sampled */ 99 tmp = t.we_on * 1000 + 300; 100 t.we_off = next_clk(t.we_on, tmp, fclk_ps); 101 102 t.cs_wr_off = t.we_off; 103 104 tmp = t.cs_wr_off * 1000 + 7000 /* t_acsn_rdy_z */; 105 t.wr_cycle = next_clk(t.cs_wr_off, tmp, fclk_ps); 106 107 return gpmc_cs_set_timings(async_cs, &t); 108 } 109 110 static int tusb_set_sync_mode(unsigned sysclk_ps, unsigned fclk_ps) 111 { 112 struct gpmc_timings t; 113 unsigned t_scsnh_advnh = sysclk_ps + 3000; 114 unsigned tmp; 115 116 memset(&t, 0, sizeof(t)); 117 t.cs_on = 8; 118 119 /* ADV_ON = t_acsnh_advnh - t_advn */ 120 t.adv_on = next_clk(t.cs_on, t_scsnh_advnh - 7000, fclk_ps); 121 122 /* GPMC_CLK rate = fclk rate / div */ 123 t.sync_clk = 12 /* 11.1 nsec */; 124 tmp = (t.sync_clk * 1000 + fclk_ps - 1) / fclk_ps; 125 if (tmp > 4) 126 return -ERANGE; 127 if (tmp <= 0) 128 tmp = 1; 129 t.page_burst_access = (fclk_ps * tmp) / 1000; 130 131 /* 132 * READ ... based on omap2420 TRM fig 12-19, 12-20 133 */ 134 135 /* ADV_RD_OFF = t_scsnh_advnh */ 136 t.adv_rd_off = next_clk(t.adv_on, t_scsnh_advnh, fclk_ps); 137 138 /* OE_ON = t_scsnh_advnh + t_advn_oen * fclk_ps (then wait for nRDY) */ 139 tmp = (t.adv_rd_off * 1000) + (3 * fclk_ps); 140 t.oe_on = next_clk(t.adv_on, tmp, fclk_ps); 141 142 /* ACCESS = number of clock cycles after t_adv_eon */ 143 tmp = (t.oe_on * 1000) + (5 * fclk_ps); 144 t.access = next_clk(t.oe_on, tmp, fclk_ps); 145 146 /* OE_OFF = after data gets sampled */ 147 tmp = (t.access * 1000) + (1 * fclk_ps); 148 t.oe_off = next_clk(t.access, tmp, fclk_ps); 149 150 t.cs_rd_off = t.oe_off; 151 152 tmp = t.cs_rd_off * 1000 + 7000 /* t_scsn_rdy_z */; 153 t.rd_cycle = next_clk(t.cs_rd_off, tmp, fclk_ps); 154 155 /* 156 * WRITE ... based on omap2420 TRM fig 12-21 157 */ 158 159 /* ADV_WR_OFF = t_scsnh_advnh */ 160 t.adv_wr_off = t.adv_rd_off; 161 162 /* WE_ON = t_scsnh_advnh + t_advn_wen * fclk_ps (then wait for nRDY) */ 163 tmp = (t.adv_wr_off * 1000) + (3 * fclk_ps); 164 t.we_on = next_clk(t.adv_wr_off, tmp, fclk_ps); 165 166 /* WE_OFF = number of clock cycles after t_adv_wen */ 167 tmp = (t.we_on * 1000) + (6 * fclk_ps); 168 t.we_off = next_clk(t.we_on, tmp, fclk_ps); 169 170 t.cs_wr_off = t.we_off; 171 172 tmp = t.cs_wr_off * 1000 + 7000 /* t_scsn_rdy_z */; 173 t.wr_cycle = next_clk(t.cs_wr_off, tmp, fclk_ps); 174 175 return gpmc_cs_set_timings(sync_cs, &t); 176 } 177 178 extern unsigned long gpmc_get_fclk_period(void); 179 180 /* tusb driver calls this when it changes the chip's clocking */ 181 int tusb6010_platform_retime(unsigned is_refclk) 182 { 183 static const char error[] = 184 KERN_ERR "tusb6010 %s retime error %d\n"; 185 186 unsigned fclk_ps = gpmc_get_fclk_period(); 187 unsigned sysclk_ps; 188 int status; 189 190 if (!refclk_psec) 191 return -ENODEV; 192 193 sysclk_ps = is_refclk ? refclk_psec : TUSB6010_OSCCLK_60; 194 195 status = tusb_set_async_mode(sysclk_ps, fclk_ps); 196 if (status < 0) { 197 printk(error, "async", status); 198 goto done; 199 } 200 status = tusb_set_sync_mode(sysclk_ps, fclk_ps); 201 if (status < 0) 202 printk(error, "sync", status); 203 done: 204 return status; 205 } 206 EXPORT_SYMBOL_GPL(tusb6010_platform_retime); 207 208 static struct resource tusb_resources[] = { 209 /* Order is significant! The start/end fields 210 * are updated during setup.. 211 */ 212 { /* Asynchronous access */ 213 .flags = IORESOURCE_MEM, 214 }, 215 { /* Synchronous access */ 216 .flags = IORESOURCE_MEM, 217 }, 218 { /* IRQ */ 219 .flags = IORESOURCE_IRQ, 220 }, 221 }; 222 223 static u64 tusb_dmamask = ~(u32)0; 224 225 static struct platform_device tusb_device = { 226 .name = "musb_hdrc", 227 .id = -1, 228 .dev = { 229 .dma_mask = &tusb_dmamask, 230 .coherent_dma_mask = 0xffffffff, 231 }, 232 .num_resources = ARRAY_SIZE(tusb_resources), 233 .resource = tusb_resources, 234 }; 235 236 237 /* this may be called only from board-*.c setup code */ 238 int __init 239 tusb6010_setup_interface(struct musb_hdrc_platform_data *data, 240 unsigned ps_refclk, unsigned waitpin, 241 unsigned async, unsigned sync, 242 unsigned irq, unsigned dmachan) 243 { 244 int status; 245 static char error[] __initdata = 246 KERN_ERR "tusb6010 init error %d, %d\n"; 247 248 /* ASYNC region, primarily for PIO */ 249 status = gpmc_cs_request(async, SZ_16M, (unsigned long *) 250 &tusb_resources[0].start); 251 if (status < 0) { 252 printk(error, 1, status); 253 return status; 254 } 255 tusb_resources[0].end = tusb_resources[0].start + 0x9ff; 256 async_cs = async; 257 gpmc_cs_write_reg(async, GPMC_CS_CONFIG1, 258 GPMC_CONFIG1_PAGE_LEN(2) 259 | GPMC_CONFIG1_WAIT_READ_MON 260 | GPMC_CONFIG1_WAIT_WRITE_MON 261 | GPMC_CONFIG1_WAIT_PIN_SEL(waitpin) 262 | GPMC_CONFIG1_READTYPE_ASYNC 263 | GPMC_CONFIG1_WRITETYPE_ASYNC 264 | GPMC_CONFIG1_DEVICESIZE_16 265 | GPMC_CONFIG1_DEVICETYPE_NOR 266 | GPMC_CONFIG1_MUXADDDATA); 267 268 269 /* SYNC region, primarily for DMA */ 270 status = gpmc_cs_request(sync, SZ_16M, (unsigned long *) 271 &tusb_resources[1].start); 272 if (status < 0) { 273 printk(error, 2, status); 274 return status; 275 } 276 tusb_resources[1].end = tusb_resources[1].start + 0x9ff; 277 sync_cs = sync; 278 gpmc_cs_write_reg(sync, GPMC_CS_CONFIG1, 279 GPMC_CONFIG1_READMULTIPLE_SUPP 280 | GPMC_CONFIG1_READTYPE_SYNC 281 | GPMC_CONFIG1_WRITEMULTIPLE_SUPP 282 | GPMC_CONFIG1_WRITETYPE_SYNC 283 | GPMC_CONFIG1_CLKACTIVATIONTIME(1) 284 | GPMC_CONFIG1_PAGE_LEN(2) 285 | GPMC_CONFIG1_WAIT_READ_MON 286 | GPMC_CONFIG1_WAIT_WRITE_MON 287 | GPMC_CONFIG1_WAIT_PIN_SEL(waitpin) 288 | GPMC_CONFIG1_DEVICESIZE_16 289 | GPMC_CONFIG1_DEVICETYPE_NOR 290 | GPMC_CONFIG1_MUXADDDATA 291 /* fclk divider gets set later */ 292 ); 293 294 /* IRQ */ 295 status = gpio_request(irq, "TUSB6010 irq"); 296 if (status < 0) { 297 printk(error, 3, status); 298 return status; 299 } 300 gpio_direction_input(irq); 301 tusb_resources[2].start = irq + IH_GPIO_BASE; 302 303 /* set up memory timings ... can speed them up later */ 304 if (!ps_refclk) { 305 printk(error, 4, status); 306 return -ENODEV; 307 } 308 refclk_psec = ps_refclk; 309 status = tusb6010_platform_retime(1); 310 if (status < 0) { 311 printk(error, 5, status); 312 return status; 313 } 314 315 /* finish device setup ... */ 316 if (!data) { 317 printk(error, 6, status); 318 return -ENODEV; 319 } 320 tusb_device.dev.platform_data = data; 321 322 /* REVISIT let the driver know what DMA channels work */ 323 if (!dmachan) 324 tusb_device.dev.dma_mask = NULL; 325 else { 326 /* assume OMAP 2420 ES2.0 and later */ 327 if (dmachan & (1 << 0)) 328 omap_cfg_reg(AA10_242X_DMAREQ0); 329 if (dmachan & (1 << 1)) 330 omap_cfg_reg(AA6_242X_DMAREQ1); 331 if (dmachan & (1 << 2)) 332 omap_cfg_reg(E4_242X_DMAREQ2); 333 if (dmachan & (1 << 3)) 334 omap_cfg_reg(G4_242X_DMAREQ3); 335 if (dmachan & (1 << 4)) 336 omap_cfg_reg(D3_242X_DMAREQ4); 337 if (dmachan & (1 << 5)) 338 omap_cfg_reg(E3_242X_DMAREQ5); 339 } 340 341 /* so far so good ... register the device */ 342 status = platform_device_register(&tusb_device); 343 if (status < 0) { 344 printk(error, 7, status); 345 return status; 346 } 347 return 0; 348 } 349