xref: /openbmc/linux/arch/arm/mach-omap2/sdrc2xxx.c (revision b830f94f)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * linux/arch/arm/mach-omap2/sdrc2xxx.c
4  *
5  * SDRAM timing related functions for OMAP2xxx
6  *
7  * Copyright (C) 2005, 2008 Texas Instruments Inc.
8  * Copyright (C) 2005, 2008 Nokia Corporation
9  *
10  * Tony Lindgren <tony@atomide.com>
11  * Paul Walmsley
12  * Richard Woodruff <r-woodruff2@ti.com>
13  */
14 
15 #include <linux/module.h>
16 #include <linux/kernel.h>
17 #include <linux/device.h>
18 #include <linux/list.h>
19 #include <linux/errno.h>
20 #include <linux/delay.h>
21 #include <linux/clk.h>
22 #include <linux/io.h>
23 
24 #include "soc.h"
25 #include "iomap.h"
26 #include "common.h"
27 #include "prm2xxx.h"
28 #include "clock.h"
29 #include "sdrc.h"
30 #include "sram.h"
31 
32 /* Memory timing, DLL mode flags */
33 #define M_DDR		1
34 #define M_LOCK_CTRL	(1 << 2)
35 #define M_UNLOCK	0
36 #define M_LOCK		1
37 
38 
39 static struct memory_timings mem_timings;
40 static u32 curr_perf_level = CORE_CLK_SRC_DPLL_X2;
41 
42 static u32 omap2xxx_sdrc_get_slow_dll_ctrl(void)
43 {
44 	return mem_timings.slow_dll_ctrl;
45 }
46 
47 static u32 omap2xxx_sdrc_get_fast_dll_ctrl(void)
48 {
49 	return mem_timings.fast_dll_ctrl;
50 }
51 
52 static u32 omap2xxx_sdrc_get_type(void)
53 {
54 	return mem_timings.m_type;
55 }
56 
57 /*
58  * Check the DLL lock state, and return tue if running in unlock mode.
59  * This is needed to compensate for the shifted DLL value in unlock mode.
60  */
61 u32 omap2xxx_sdrc_dll_is_unlocked(void)
62 {
63 	/* dlla and dllb are a set */
64 	u32 dll_state = sdrc_read_reg(SDRC_DLLA_CTRL);
65 
66 	if ((dll_state & (1 << 2)) == (1 << 2))
67 		return 1;
68 	else
69 		return 0;
70 }
71 
72 /*
73  * 'level' is the value to store to CM_CLKSEL2_PLL.CORE_CLK_SRC.
74  * Practical values are CORE_CLK_SRC_DPLL (for CORE_CLK = DPLL_CLK) or
75  * CORE_CLK_SRC_DPLL_X2 (for CORE_CLK = * DPLL_CLK * 2)
76  *
77  * Used by the clock framework during CORE DPLL changes
78  */
79 u32 omap2xxx_sdrc_reprogram(u32 level, u32 force)
80 {
81 	u32 dll_ctrl, m_type;
82 	u32 prev = curr_perf_level;
83 	unsigned long flags;
84 
85 	if ((curr_perf_level == level) && !force)
86 		return prev;
87 
88 	if (level == CORE_CLK_SRC_DPLL)
89 		dll_ctrl = omap2xxx_sdrc_get_slow_dll_ctrl();
90 	else if (level == CORE_CLK_SRC_DPLL_X2)
91 		dll_ctrl = omap2xxx_sdrc_get_fast_dll_ctrl();
92 	else
93 		return prev;
94 
95 	m_type = omap2xxx_sdrc_get_type();
96 
97 	local_irq_save(flags);
98 	/*
99 	 * XXX These calls should be abstracted out through a
100 	 * prm2xxx.c function
101 	 */
102 	if (cpu_is_omap2420())
103 		writel_relaxed(0xffff, OMAP2420_PRCM_VOLTSETUP);
104 	else
105 		writel_relaxed(0xffff, OMAP2430_PRCM_VOLTSETUP);
106 	omap2_sram_reprogram_sdrc(level, dll_ctrl, m_type);
107 	curr_perf_level = level;
108 	local_irq_restore(flags);
109 
110 	return prev;
111 }
112 
113 /* Used by the clock framework during CORE DPLL changes */
114 void omap2xxx_sdrc_init_params(u32 force_lock_to_unlock_mode)
115 {
116 	unsigned long dll_cnt;
117 	u32 fast_dll = 0;
118 
119 	/* DDR = 1, SDR = 0 */
120 	mem_timings.m_type = !((sdrc_read_reg(SDRC_MR_0) & 0x3) == 0x1);
121 
122 	/* 2422 es2.05 and beyond has a single SIP DDR instead of 2 like others.
123 	 * In the case of 2422, its ok to use CS1 instead of CS0.
124 	 */
125 	if (cpu_is_omap2422())
126 		mem_timings.base_cs = 1;
127 	else
128 		mem_timings.base_cs = 0;
129 
130 	if (mem_timings.m_type != M_DDR)
131 		return;
132 
133 	/* With DDR we need to determine the low frequency DLL value */
134 	if (((mem_timings.fast_dll_ctrl & (1 << 2)) == M_LOCK_CTRL))
135 		mem_timings.dll_mode = M_UNLOCK;
136 	else
137 		mem_timings.dll_mode = M_LOCK;
138 
139 	if (mem_timings.base_cs == 0) {
140 		fast_dll = sdrc_read_reg(SDRC_DLLA_CTRL);
141 		dll_cnt = sdrc_read_reg(SDRC_DLLA_STATUS) & 0xff00;
142 	} else {
143 		fast_dll = sdrc_read_reg(SDRC_DLLB_CTRL);
144 		dll_cnt = sdrc_read_reg(SDRC_DLLB_STATUS) & 0xff00;
145 	}
146 	if (force_lock_to_unlock_mode) {
147 		fast_dll &= ~0xff00;
148 		fast_dll |= dll_cnt;		/* Current lock mode */
149 	}
150 	/* set fast timings with DLL filter disabled */
151 	mem_timings.fast_dll_ctrl = (fast_dll | (3 << 8));
152 
153 	/* No disruptions, DDR will be offline & C-ABI not followed */
154 	omap2_sram_ddr_init(&mem_timings.slow_dll_ctrl,
155 			    mem_timings.fast_dll_ctrl,
156 			    mem_timings.base_cs,
157 			    force_lock_to_unlock_mode);
158 	mem_timings.slow_dll_ctrl &= 0xff00;	/* Keep lock value */
159 
160 	/* Turn status into unlock ctrl */
161 	mem_timings.slow_dll_ctrl |=
162 		((mem_timings.fast_dll_ctrl & 0xF) | (1 << 2));
163 
164 	/* 90 degree phase for anything below 133MHz + disable DLL filter */
165 	mem_timings.slow_dll_ctrl |= ((1 << 1) | (3 << 8));
166 }
167