xref: /openbmc/linux/arch/arm/mach-omap2/prm33xx.c (revision b830f94f)
1 /*
2  * AM33XX PRM functions
3  *
4  * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/
5  *
6  * This program is free software; you can redistribute it and/or
7  * modify it under the terms of the GNU General Public License as
8  * published by the Free Software Foundation version 2.
9  *
10  * This program is distributed "as is" WITHOUT ANY WARRANTY of any
11  * kind, whether express or implied; without even the implied warranty
12  * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
13  * GNU General Public License for more details.
14  */
15 
16 #include <linux/kernel.h>
17 #include <linux/types.h>
18 #include <linux/errno.h>
19 #include <linux/err.h>
20 #include <linux/io.h>
21 
22 #include "powerdomain.h"
23 #include "prm33xx.h"
24 #include "prm-regbits-33xx.h"
25 
26 #define AM33XX_PRM_RSTCTRL_OFFSET		0x0000
27 
28 #define AM33XX_RST_GLOBAL_WARM_SW_MASK		(1 << 0)
29 
30 /* Read a register in a PRM instance */
31 static u32 am33xx_prm_read_reg(s16 inst, u16 idx)
32 {
33 	return readl_relaxed(prm_base.va + inst + idx);
34 }
35 
36 /* Write into a register in a PRM instance */
37 static void am33xx_prm_write_reg(u32 val, s16 inst, u16 idx)
38 {
39 	writel_relaxed(val, prm_base.va + inst + idx);
40 }
41 
42 /* Read-modify-write a register in PRM. Caller must lock */
43 static u32 am33xx_prm_rmw_reg_bits(u32 mask, u32 bits, s16 inst, s16 idx)
44 {
45 	u32 v;
46 
47 	v = am33xx_prm_read_reg(inst, idx);
48 	v &= ~mask;
49 	v |= bits;
50 	am33xx_prm_write_reg(v, inst, idx);
51 
52 	return v;
53 }
54 
55 /**
56  * am33xx_prm_is_hardreset_asserted - read the HW reset line state of
57  * submodules contained in the hwmod module
58  * @shift: register bit shift corresponding to the reset line to check
59  * @part: PRM partition, ignored for AM33xx
60  * @inst: CM instance register offset (*_INST macro)
61  * @rstctrl_offs: RM_RSTCTRL register address offset for this module
62  *
63  * Returns 1 if the (sub)module hardreset line is currently asserted,
64  * 0 if the (sub)module hardreset line is not currently asserted, or
65  * -EINVAL upon parameter error.
66  */
67 static int am33xx_prm_is_hardreset_asserted(u8 shift, u8 part, s16 inst,
68 					    u16 rstctrl_offs)
69 {
70 	u32 v;
71 
72 	v = am33xx_prm_read_reg(inst, rstctrl_offs);
73 	v &= 1 << shift;
74 	v >>= shift;
75 
76 	return v;
77 }
78 
79 /**
80  * am33xx_prm_assert_hardreset - assert the HW reset line of a submodule
81  * @shift: register bit shift corresponding to the reset line to assert
82  * @part: CM partition, ignored for AM33xx
83  * @inst: CM instance register offset (*_INST macro)
84  * @rstctrl_reg: RM_RSTCTRL register address for this module
85  *
86  * Some IPs like dsp, ipu or iva contain processors that require an HW
87  * reset line to be asserted / deasserted in order to fully enable the
88  * IP.  These modules may have multiple hard-reset lines that reset
89  * different 'submodules' inside the IP block.  This function will
90  * place the submodule into reset.  Returns 0 upon success or -EINVAL
91  * upon an argument error.
92  */
93 static int am33xx_prm_assert_hardreset(u8 shift, u8 part, s16 inst,
94 				       u16 rstctrl_offs)
95 {
96 	u32 mask = 1 << shift;
97 
98 	am33xx_prm_rmw_reg_bits(mask, mask, inst, rstctrl_offs);
99 
100 	return 0;
101 }
102 
103 /**
104  * am33xx_prm_deassert_hardreset - deassert a submodule hardreset line and
105  * wait
106  * @shift: register bit shift corresponding to the reset line to deassert
107  * @st_shift: reset status register bit shift corresponding to the reset line
108  * @part: PRM partition, not used for AM33xx
109  * @inst: CM instance register offset (*_INST macro)
110  * @rstctrl_reg: RM_RSTCTRL register address for this module
111  * @rstst_reg: RM_RSTST register address for this module
112  *
113  * Some IPs like dsp, ipu or iva contain processors that require an HW
114  * reset line to be asserted / deasserted in order to fully enable the
115  * IP.  These modules may have multiple hard-reset lines that reset
116  * different 'submodules' inside the IP block.  This function will
117  * take the submodule out of reset and wait until the PRCM indicates
118  * that the reset has completed before returning.  Returns 0 upon success or
119  * -EINVAL upon an argument error, -EEXIST if the submodule was already out
120  * of reset, or -EBUSY if the submodule did not exit reset promptly.
121  */
122 static int am33xx_prm_deassert_hardreset(u8 shift, u8 st_shift, u8 part,
123 					 s16 inst, u16 rstctrl_offs,
124 					 u16 rstst_offs)
125 {
126 	int c;
127 	u32 mask = 1 << st_shift;
128 
129 	/* Check the current status to avoid  de-asserting the line twice */
130 	if (am33xx_prm_is_hardreset_asserted(shift, 0, inst, rstctrl_offs) == 0)
131 		return -EEXIST;
132 
133 	/* Clear the reset status by writing 1 to the status bit */
134 	am33xx_prm_rmw_reg_bits(0xffffffff, mask, inst, rstst_offs);
135 
136 	/* de-assert the reset control line */
137 	mask = 1 << shift;
138 
139 	am33xx_prm_rmw_reg_bits(mask, 0, inst, rstctrl_offs);
140 
141 	/* wait the status to be set */
142 	omap_test_timeout(am33xx_prm_is_hardreset_asserted(st_shift, 0, inst,
143 							   rstst_offs),
144 			  MAX_MODULE_HARDRESET_WAIT, c);
145 
146 	return (c == MAX_MODULE_HARDRESET_WAIT) ? -EBUSY : 0;
147 }
148 
149 static int am33xx_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst)
150 {
151 	am33xx_prm_rmw_reg_bits(OMAP_POWERSTATE_MASK,
152 				(pwrst << OMAP_POWERSTATE_SHIFT),
153 				pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
154 	return 0;
155 }
156 
157 static int am33xx_pwrdm_read_next_pwrst(struct powerdomain *pwrdm)
158 {
159 	u32 v;
160 
161 	v = am33xx_prm_read_reg(pwrdm->prcm_offs,  pwrdm->pwrstctrl_offs);
162 	v &= OMAP_POWERSTATE_MASK;
163 	v >>= OMAP_POWERSTATE_SHIFT;
164 
165 	return v;
166 }
167 
168 static int am33xx_pwrdm_read_pwrst(struct powerdomain *pwrdm)
169 {
170 	u32 v;
171 
172 	v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs);
173 	v &= OMAP_POWERSTATEST_MASK;
174 	v >>= OMAP_POWERSTATEST_SHIFT;
175 
176 	return v;
177 }
178 
179 static int am33xx_pwrdm_set_lowpwrstchange(struct powerdomain *pwrdm)
180 {
181 	am33xx_prm_rmw_reg_bits(AM33XX_LOWPOWERSTATECHANGE_MASK,
182 				(1 << AM33XX_LOWPOWERSTATECHANGE_SHIFT),
183 				pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
184 	return 0;
185 }
186 
187 static int am33xx_pwrdm_clear_all_prev_pwrst(struct powerdomain *pwrdm)
188 {
189 	am33xx_prm_rmw_reg_bits(AM33XX_LASTPOWERSTATEENTERED_MASK,
190 				AM33XX_LASTPOWERSTATEENTERED_MASK,
191 				pwrdm->prcm_offs, pwrdm->pwrstst_offs);
192 	return 0;
193 }
194 
195 static int am33xx_pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst)
196 {
197 	u32 m;
198 
199 	m = pwrdm->logicretstate_mask;
200 	if (!m)
201 		return -EINVAL;
202 
203 	am33xx_prm_rmw_reg_bits(m, (pwrst << __ffs(m)),
204 				pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
205 
206 	return 0;
207 }
208 
209 static int am33xx_pwrdm_read_logic_pwrst(struct powerdomain *pwrdm)
210 {
211 	u32 v;
212 
213 	v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs);
214 	v &= AM33XX_LOGICSTATEST_MASK;
215 	v >>= AM33XX_LOGICSTATEST_SHIFT;
216 
217 	return v;
218 }
219 
220 static int am33xx_pwrdm_read_logic_retst(struct powerdomain *pwrdm)
221 {
222 	u32 v, m;
223 
224 	m = pwrdm->logicretstate_mask;
225 	if (!m)
226 		return -EINVAL;
227 
228 	v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
229 	v &= m;
230 	v >>= __ffs(m);
231 
232 	return v;
233 }
234 
235 static int am33xx_pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank,
236 		u8 pwrst)
237 {
238 	u32 m;
239 
240 	m = pwrdm->mem_on_mask[bank];
241 	if (!m)
242 		return -EINVAL;
243 
244 	am33xx_prm_rmw_reg_bits(m, (pwrst << __ffs(m)),
245 				pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
246 
247 	return 0;
248 }
249 
250 static int am33xx_pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank,
251 					u8 pwrst)
252 {
253 	u32 m;
254 
255 	m = pwrdm->mem_ret_mask[bank];
256 	if (!m)
257 		return -EINVAL;
258 
259 	am33xx_prm_rmw_reg_bits(m, (pwrst << __ffs(m)),
260 				pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
261 
262 	return 0;
263 }
264 
265 static int am33xx_pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank)
266 {
267 	u32 m, v;
268 
269 	m = pwrdm->mem_pwrst_mask[bank];
270 	if (!m)
271 		return -EINVAL;
272 
273 	v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs);
274 	v &= m;
275 	v >>= __ffs(m);
276 
277 	return v;
278 }
279 
280 static int am33xx_pwrdm_read_mem_retst(struct powerdomain *pwrdm, u8 bank)
281 {
282 	u32 m, v;
283 
284 	m = pwrdm->mem_retst_mask[bank];
285 	if (!m)
286 		return -EINVAL;
287 
288 	v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
289 	v &= m;
290 	v >>= __ffs(m);
291 
292 	return v;
293 }
294 
295 static int am33xx_pwrdm_wait_transition(struct powerdomain *pwrdm)
296 {
297 	u32 c = 0;
298 
299 	/*
300 	 * REVISIT: pwrdm_wait_transition() may be better implemented
301 	 * via a callback and a periodic timer check -- how long do we expect
302 	 * powerdomain transitions to take?
303 	 */
304 
305 	/* XXX Is this udelay() value meaningful? */
306 	while ((am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs)
307 			& OMAP_INTRANSITION_MASK) &&
308 			(c++ < PWRDM_TRANSITION_BAILOUT))
309 		udelay(1);
310 
311 	if (c > PWRDM_TRANSITION_BAILOUT) {
312 		pr_err("powerdomain: %s: waited too long to complete transition\n",
313 		       pwrdm->name);
314 		return -EAGAIN;
315 	}
316 
317 	pr_debug("powerdomain: completed transition in %d loops\n", c);
318 
319 	return 0;
320 }
321 
322 static int am33xx_check_vcvp(void)
323 {
324 	/* No VC/VP on am33xx devices */
325 	return 0;
326 }
327 
328 /**
329  * am33xx_prm_global_warm_sw_reset - reboot the device via warm reset
330  *
331  * Immediately reboots the device through warm reset.
332  */
333 static void am33xx_prm_global_warm_sw_reset(void)
334 {
335 	am33xx_prm_rmw_reg_bits(AM33XX_RST_GLOBAL_WARM_SW_MASK,
336 				AM33XX_RST_GLOBAL_WARM_SW_MASK,
337 				AM33XX_PRM_DEVICE_MOD,
338 				AM33XX_PRM_RSTCTRL_OFFSET);
339 
340 	/* OCP barrier */
341 	(void)am33xx_prm_read_reg(AM33XX_PRM_DEVICE_MOD,
342 				  AM33XX_PRM_RSTCTRL_OFFSET);
343 }
344 
345 static void am33xx_pwrdm_save_context(struct powerdomain *pwrdm)
346 {
347 	pwrdm->context = am33xx_prm_read_reg(pwrdm->prcm_offs,
348 						pwrdm->pwrstctrl_offs);
349 	/*
350 	 * Do not save LOWPOWERSTATECHANGE, writing a 1 indicates a request,
351 	 * reading back a 1 indicates a request in progress.
352 	 */
353 	pwrdm->context &= ~AM33XX_LOWPOWERSTATECHANGE_MASK;
354 }
355 
356 static void am33xx_pwrdm_restore_context(struct powerdomain *pwrdm)
357 {
358 	int st, ctrl;
359 
360 	st = am33xx_prm_read_reg(pwrdm->prcm_offs,
361 				 pwrdm->pwrstst_offs);
362 
363 	am33xx_prm_write_reg(pwrdm->context, pwrdm->prcm_offs,
364 			     pwrdm->pwrstctrl_offs);
365 
366 	/* Make sure we only wait for a transition if there is one */
367 	st &= OMAP_POWERSTATEST_MASK;
368 	ctrl = OMAP_POWERSTATEST_MASK & pwrdm->context;
369 
370 	if (st != ctrl)
371 		am33xx_pwrdm_wait_transition(pwrdm);
372 }
373 
374 struct pwrdm_ops am33xx_pwrdm_operations = {
375 	.pwrdm_set_next_pwrst		= am33xx_pwrdm_set_next_pwrst,
376 	.pwrdm_read_next_pwrst		= am33xx_pwrdm_read_next_pwrst,
377 	.pwrdm_read_pwrst		= am33xx_pwrdm_read_pwrst,
378 	.pwrdm_set_logic_retst		= am33xx_pwrdm_set_logic_retst,
379 	.pwrdm_read_logic_pwrst		= am33xx_pwrdm_read_logic_pwrst,
380 	.pwrdm_read_logic_retst		= am33xx_pwrdm_read_logic_retst,
381 	.pwrdm_clear_all_prev_pwrst	= am33xx_pwrdm_clear_all_prev_pwrst,
382 	.pwrdm_set_lowpwrstchange	= am33xx_pwrdm_set_lowpwrstchange,
383 	.pwrdm_read_mem_pwrst		= am33xx_pwrdm_read_mem_pwrst,
384 	.pwrdm_read_mem_retst		= am33xx_pwrdm_read_mem_retst,
385 	.pwrdm_set_mem_onst		= am33xx_pwrdm_set_mem_onst,
386 	.pwrdm_set_mem_retst		= am33xx_pwrdm_set_mem_retst,
387 	.pwrdm_wait_transition		= am33xx_pwrdm_wait_transition,
388 	.pwrdm_has_voltdm		= am33xx_check_vcvp,
389 	.pwrdm_save_context		= am33xx_pwrdm_save_context,
390 	.pwrdm_restore_context		= am33xx_pwrdm_restore_context,
391 };
392 
393 static struct prm_ll_data am33xx_prm_ll_data = {
394 	.assert_hardreset		= am33xx_prm_assert_hardreset,
395 	.deassert_hardreset		= am33xx_prm_deassert_hardreset,
396 	.is_hardreset_asserted		= am33xx_prm_is_hardreset_asserted,
397 	.reset_system			= am33xx_prm_global_warm_sw_reset,
398 };
399 
400 int __init am33xx_prm_init(const struct omap_prcm_init_data *data)
401 {
402 	return prm_register(&am33xx_prm_ll_data);
403 }
404 
405 static void __exit am33xx_prm_exit(void)
406 {
407 	prm_unregister(&am33xx_prm_ll_data);
408 }
409 __exitcall(am33xx_prm_exit);
410