1 /* 2 * OMAP2/3 PRM module functions 3 * 4 * Copyright (C) 2010-2011 Texas Instruments, Inc. 5 * Copyright (C) 2010 Nokia Corporation 6 * Benoît Cousson 7 * Paul Walmsley 8 * 9 * This program is free software; you can redistribute it and/or modify 10 * it under the terms of the GNU General Public License version 2 as 11 * published by the Free Software Foundation. 12 */ 13 14 #include <linux/kernel.h> 15 #include <linux/errno.h> 16 #include <linux/err.h> 17 #include <linux/io.h> 18 19 #include "common.h" 20 #include "powerdomain.h" 21 #include "prm2xxx_3xxx.h" 22 #include "prm-regbits-24xx.h" 23 #include "clockdomain.h" 24 25 /** 26 * omap2_prm_is_hardreset_asserted - read the HW reset line state of 27 * submodules contained in the hwmod module 28 * @prm_mod: PRM submodule base (e.g. CORE_MOD) 29 * @shift: register bit shift corresponding to the reset line to check 30 * 31 * Returns 1 if the (sub)module hardreset line is currently asserted, 32 * 0 if the (sub)module hardreset line is not currently asserted, or 33 * -EINVAL if called while running on a non-OMAP2/3 chip. 34 */ 35 int omap2_prm_is_hardreset_asserted(s16 prm_mod, u8 shift) 36 { 37 return omap2_prm_read_mod_bits_shift(prm_mod, OMAP2_RM_RSTCTRL, 38 (1 << shift)); 39 } 40 41 /** 42 * omap2_prm_assert_hardreset - assert the HW reset line of a submodule 43 * @prm_mod: PRM submodule base (e.g. CORE_MOD) 44 * @shift: register bit shift corresponding to the reset line to assert 45 * 46 * Some IPs like dsp or iva contain processors that require an HW 47 * reset line to be asserted / deasserted in order to fully enable the 48 * IP. These modules may have multiple hard-reset lines that reset 49 * different 'submodules' inside the IP block. This function will 50 * place the submodule into reset. Returns 0 upon success or -EINVAL 51 * upon an argument error. 52 */ 53 int omap2_prm_assert_hardreset(s16 prm_mod, u8 shift) 54 { 55 u32 mask; 56 57 mask = 1 << shift; 58 omap2_prm_rmw_mod_reg_bits(mask, mask, prm_mod, OMAP2_RM_RSTCTRL); 59 60 return 0; 61 } 62 63 /** 64 * omap2_prm_deassert_hardreset - deassert a submodule hardreset line and wait 65 * @prm_mod: PRM submodule base (e.g. CORE_MOD) 66 * @rst_shift: register bit shift corresponding to the reset line to deassert 67 * @st_shift: register bit shift for the status of the deasserted submodule 68 * 69 * Some IPs like dsp or iva contain processors that require an HW 70 * reset line to be asserted / deasserted in order to fully enable the 71 * IP. These modules may have multiple hard-reset lines that reset 72 * different 'submodules' inside the IP block. This function will 73 * take the submodule out of reset and wait until the PRCM indicates 74 * that the reset has completed before returning. Returns 0 upon success or 75 * -EINVAL upon an argument error, -EEXIST if the submodule was already out 76 * of reset, or -EBUSY if the submodule did not exit reset promptly. 77 */ 78 int omap2_prm_deassert_hardreset(s16 prm_mod, u8 rst_shift, u8 st_shift) 79 { 80 u32 rst, st; 81 int c; 82 83 rst = 1 << rst_shift; 84 st = 1 << st_shift; 85 86 /* Check the current status to avoid de-asserting the line twice */ 87 if (omap2_prm_read_mod_bits_shift(prm_mod, OMAP2_RM_RSTCTRL, rst) == 0) 88 return -EEXIST; 89 90 /* Clear the reset status by writing 1 to the status bit */ 91 omap2_prm_rmw_mod_reg_bits(0xffffffff, st, prm_mod, OMAP2_RM_RSTST); 92 /* de-assert the reset control line */ 93 omap2_prm_rmw_mod_reg_bits(rst, 0, prm_mod, OMAP2_RM_RSTCTRL); 94 /* wait the status to be set */ 95 omap_test_timeout(omap2_prm_read_mod_bits_shift(prm_mod, OMAP2_RM_RSTST, 96 st), 97 MAX_MODULE_HARDRESET_WAIT, c); 98 99 return (c == MAX_MODULE_HARDRESET_WAIT) ? -EBUSY : 0; 100 } 101 102 103 /* Powerdomain low-level functions */ 104 105 /* Common functions across OMAP2 and OMAP3 */ 106 int omap2_pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank, 107 u8 pwrst) 108 { 109 u32 m; 110 111 m = omap2_pwrdm_get_mem_bank_onstate_mask(bank); 112 113 omap2_prm_rmw_mod_reg_bits(m, (pwrst << __ffs(m)), pwrdm->prcm_offs, 114 OMAP2_PM_PWSTCTRL); 115 116 return 0; 117 } 118 119 int omap2_pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank, 120 u8 pwrst) 121 { 122 u32 m; 123 124 m = omap2_pwrdm_get_mem_bank_retst_mask(bank); 125 126 omap2_prm_rmw_mod_reg_bits(m, (pwrst << __ffs(m)), pwrdm->prcm_offs, 127 OMAP2_PM_PWSTCTRL); 128 129 return 0; 130 } 131 132 int omap2_pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank) 133 { 134 u32 m; 135 136 m = omap2_pwrdm_get_mem_bank_stst_mask(bank); 137 138 return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs, OMAP2_PM_PWSTST, 139 m); 140 } 141 142 int omap2_pwrdm_read_mem_retst(struct powerdomain *pwrdm, u8 bank) 143 { 144 u32 m; 145 146 m = omap2_pwrdm_get_mem_bank_retst_mask(bank); 147 148 return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs, 149 OMAP2_PM_PWSTCTRL, m); 150 } 151 152 int omap2_pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst) 153 { 154 u32 v; 155 156 v = pwrst << __ffs(OMAP_LOGICRETSTATE_MASK); 157 omap2_prm_rmw_mod_reg_bits(OMAP_LOGICRETSTATE_MASK, v, pwrdm->prcm_offs, 158 OMAP2_PM_PWSTCTRL); 159 160 return 0; 161 } 162 163 int omap2_pwrdm_wait_transition(struct powerdomain *pwrdm) 164 { 165 u32 c = 0; 166 167 /* 168 * REVISIT: pwrdm_wait_transition() may be better implemented 169 * via a callback and a periodic timer check -- how long do we expect 170 * powerdomain transitions to take? 171 */ 172 173 /* XXX Is this udelay() value meaningful? */ 174 while ((omap2_prm_read_mod_reg(pwrdm->prcm_offs, OMAP2_PM_PWSTST) & 175 OMAP_INTRANSITION_MASK) && 176 (c++ < PWRDM_TRANSITION_BAILOUT)) 177 udelay(1); 178 179 if (c > PWRDM_TRANSITION_BAILOUT) { 180 pr_err("powerdomain: %s: waited too long to complete transition\n", 181 pwrdm->name); 182 return -EAGAIN; 183 } 184 185 pr_debug("powerdomain: completed transition in %d loops\n", c); 186 187 return 0; 188 } 189 190 int omap2_clkdm_add_wkdep(struct clockdomain *clkdm1, 191 struct clockdomain *clkdm2) 192 { 193 omap2_prm_set_mod_reg_bits((1 << clkdm2->dep_bit), 194 clkdm1->pwrdm.ptr->prcm_offs, PM_WKDEP); 195 return 0; 196 } 197 198 int omap2_clkdm_del_wkdep(struct clockdomain *clkdm1, 199 struct clockdomain *clkdm2) 200 { 201 omap2_prm_clear_mod_reg_bits((1 << clkdm2->dep_bit), 202 clkdm1->pwrdm.ptr->prcm_offs, PM_WKDEP); 203 return 0; 204 } 205 206 int omap2_clkdm_read_wkdep(struct clockdomain *clkdm1, 207 struct clockdomain *clkdm2) 208 { 209 return omap2_prm_read_mod_bits_shift(clkdm1->pwrdm.ptr->prcm_offs, 210 PM_WKDEP, (1 << clkdm2->dep_bit)); 211 } 212 213 /* XXX Caller must hold the clkdm's powerdomain lock */ 214 int omap2_clkdm_clear_all_wkdeps(struct clockdomain *clkdm) 215 { 216 struct clkdm_dep *cd; 217 u32 mask = 0; 218 219 for (cd = clkdm->wkdep_srcs; cd && cd->clkdm_name; cd++) { 220 if (!cd->clkdm) 221 continue; /* only happens if data is erroneous */ 222 223 /* PRM accesses are slow, so minimize them */ 224 mask |= 1 << cd->clkdm->dep_bit; 225 cd->wkdep_usecount = 0; 226 } 227 228 omap2_prm_clear_mod_reg_bits(mask, clkdm->pwrdm.ptr->prcm_offs, 229 PM_WKDEP); 230 return 0; 231 } 232 233