1 /* 2 * omap_hwmod macros, structures 3 * 4 * Copyright (C) 2009-2011 Nokia Corporation 5 * Copyright (C) 2011-2012 Texas Instruments, Inc. 6 * Paul Walmsley 7 * 8 * Created in collaboration with (alphabetical order): Benoît Cousson, 9 * Kevin Hilman, Tony Lindgren, Rajendra Nayak, Vikram Pandita, Sakari 10 * Poussa, Anand Sawant, Santosh Shilimkar, Richard Woodruff 11 * 12 * This program is free software; you can redistribute it and/or modify 13 * it under the terms of the GNU General Public License version 2 as 14 * published by the Free Software Foundation. 15 * 16 * These headers and macros are used to define OMAP on-chip module 17 * data and their integration with other OMAP modules and Linux. 18 * Copious documentation and references can also be found in the 19 * omap_hwmod code, in arch/arm/mach-omap2/omap_hwmod.c (as of this 20 * writing). 21 * 22 * To do: 23 * - add interconnect error log structures 24 * - init_conn_id_bit (CONNID_BIT_VECTOR) 25 * - implement default hwmod SMS/SDRC flags? 26 * - move Linux-specific data ("non-ROM data") out 27 * 28 */ 29 #ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD_H 30 #define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD_H 31 32 #include <linux/kernel.h> 33 #include <linux/init.h> 34 #include <linux/list.h> 35 #include <linux/ioport.h> 36 #include <linux/spinlock.h> 37 38 struct omap_device; 39 40 extern struct sysc_regbits omap_hwmod_sysc_type1; 41 extern struct sysc_regbits omap_hwmod_sysc_type2; 42 extern struct sysc_regbits omap_hwmod_sysc_type3; 43 extern struct sysc_regbits omap34xx_sr_sysc_fields; 44 extern struct sysc_regbits omap36xx_sr_sysc_fields; 45 extern struct sysc_regbits omap3_sham_sysc_fields; 46 extern struct sysc_regbits omap3xxx_aes_sysc_fields; 47 extern struct sysc_regbits omap_hwmod_sysc_type_mcasp; 48 extern struct sysc_regbits omap_hwmod_sysc_type_usb_host_fs; 49 50 /* 51 * OCP SYSCONFIG bit shifts/masks TYPE1. These are for IPs compliant 52 * with the original PRCM protocol defined for OMAP2420 53 */ 54 #define SYSC_TYPE1_MIDLEMODE_SHIFT 12 55 #define SYSC_TYPE1_MIDLEMODE_MASK (0x3 << SYSC_TYPE1_MIDLEMODE_SHIFT) 56 #define SYSC_TYPE1_CLOCKACTIVITY_SHIFT 8 57 #define SYSC_TYPE1_CLOCKACTIVITY_MASK (0x3 << SYSC_TYPE1_CLOCKACTIVITY_SHIFT) 58 #define SYSC_TYPE1_SIDLEMODE_SHIFT 3 59 #define SYSC_TYPE1_SIDLEMODE_MASK (0x3 << SYSC_TYPE1_SIDLEMODE_SHIFT) 60 #define SYSC_TYPE1_ENAWAKEUP_SHIFT 2 61 #define SYSC_TYPE1_ENAWAKEUP_MASK (1 << SYSC_TYPE1_ENAWAKEUP_SHIFT) 62 #define SYSC_TYPE1_SOFTRESET_SHIFT 1 63 #define SYSC_TYPE1_SOFTRESET_MASK (1 << SYSC_TYPE1_SOFTRESET_SHIFT) 64 #define SYSC_TYPE1_AUTOIDLE_SHIFT 0 65 #define SYSC_TYPE1_AUTOIDLE_MASK (1 << SYSC_TYPE1_AUTOIDLE_SHIFT) 66 67 /* 68 * OCP SYSCONFIG bit shifts/masks TYPE2. These are for IPs compliant 69 * with the new PRCM protocol defined for new OMAP4 IPs. 70 */ 71 #define SYSC_TYPE2_SOFTRESET_SHIFT 0 72 #define SYSC_TYPE2_SOFTRESET_MASK (1 << SYSC_TYPE2_SOFTRESET_SHIFT) 73 #define SYSC_TYPE2_SIDLEMODE_SHIFT 2 74 #define SYSC_TYPE2_SIDLEMODE_MASK (0x3 << SYSC_TYPE2_SIDLEMODE_SHIFT) 75 #define SYSC_TYPE2_MIDLEMODE_SHIFT 4 76 #define SYSC_TYPE2_MIDLEMODE_MASK (0x3 << SYSC_TYPE2_MIDLEMODE_SHIFT) 77 #define SYSC_TYPE2_DMADISABLE_SHIFT 16 78 #define SYSC_TYPE2_DMADISABLE_MASK (0x1 << SYSC_TYPE2_DMADISABLE_SHIFT) 79 80 /* 81 * OCP SYSCONFIG bit shifts/masks TYPE3. 82 * This is applicable for some IPs present in AM33XX 83 */ 84 #define SYSC_TYPE3_SIDLEMODE_SHIFT 0 85 #define SYSC_TYPE3_SIDLEMODE_MASK (0x3 << SYSC_TYPE3_SIDLEMODE_SHIFT) 86 #define SYSC_TYPE3_MIDLEMODE_SHIFT 2 87 #define SYSC_TYPE3_MIDLEMODE_MASK (0x3 << SYSC_TYPE3_MIDLEMODE_SHIFT) 88 89 /* OCP SYSSTATUS bit shifts/masks */ 90 #define SYSS_RESETDONE_SHIFT 0 91 #define SYSS_RESETDONE_MASK (1 << SYSS_RESETDONE_SHIFT) 92 93 /* Master standby/slave idle mode flags */ 94 #define HWMOD_IDLEMODE_FORCE (1 << 0) 95 #define HWMOD_IDLEMODE_NO (1 << 1) 96 #define HWMOD_IDLEMODE_SMART (1 << 2) 97 #define HWMOD_IDLEMODE_SMART_WKUP (1 << 3) 98 99 /* modulemode control type (SW or HW) */ 100 #define MODULEMODE_HWCTRL 1 101 #define MODULEMODE_SWCTRL 2 102 103 #define DEBUG_OMAP2UART1_FLAGS 0 104 #define DEBUG_OMAP2UART2_FLAGS 0 105 #define DEBUG_OMAP2UART3_FLAGS 0 106 #define DEBUG_OMAP3UART3_FLAGS 0 107 #define DEBUG_OMAP3UART4_FLAGS 0 108 #define DEBUG_OMAP4UART3_FLAGS 0 109 #define DEBUG_OMAP4UART4_FLAGS 0 110 #define DEBUG_TI81XXUART1_FLAGS 0 111 #define DEBUG_TI81XXUART2_FLAGS 0 112 #define DEBUG_TI81XXUART3_FLAGS 0 113 #define DEBUG_AM33XXUART1_FLAGS 0 114 115 #define DEBUG_OMAPUART_FLAGS (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET) 116 117 #ifdef CONFIG_OMAP_GPMC_DEBUG 118 #define DEBUG_OMAP_GPMC_HWMOD_FLAGS HWMOD_INIT_NO_RESET 119 #else 120 #define DEBUG_OMAP_GPMC_HWMOD_FLAGS 0 121 #endif 122 123 #if defined(CONFIG_DEBUG_OMAP2UART1) 124 #undef DEBUG_OMAP2UART1_FLAGS 125 #define DEBUG_OMAP2UART1_FLAGS DEBUG_OMAPUART_FLAGS 126 #elif defined(CONFIG_DEBUG_OMAP2UART2) 127 #undef DEBUG_OMAP2UART2_FLAGS 128 #define DEBUG_OMAP2UART2_FLAGS DEBUG_OMAPUART_FLAGS 129 #elif defined(CONFIG_DEBUG_OMAP2UART3) 130 #undef DEBUG_OMAP2UART3_FLAGS 131 #define DEBUG_OMAP2UART3_FLAGS DEBUG_OMAPUART_FLAGS 132 #elif defined(CONFIG_DEBUG_OMAP3UART3) 133 #undef DEBUG_OMAP3UART3_FLAGS 134 #define DEBUG_OMAP3UART3_FLAGS DEBUG_OMAPUART_FLAGS 135 #elif defined(CONFIG_DEBUG_OMAP3UART4) 136 #undef DEBUG_OMAP3UART4_FLAGS 137 #define DEBUG_OMAP3UART4_FLAGS DEBUG_OMAPUART_FLAGS 138 #elif defined(CONFIG_DEBUG_OMAP4UART3) 139 #undef DEBUG_OMAP4UART3_FLAGS 140 #define DEBUG_OMAP4UART3_FLAGS DEBUG_OMAPUART_FLAGS 141 #elif defined(CONFIG_DEBUG_OMAP4UART4) 142 #undef DEBUG_OMAP4UART4_FLAGS 143 #define DEBUG_OMAP4UART4_FLAGS DEBUG_OMAPUART_FLAGS 144 #elif defined(CONFIG_DEBUG_TI81XXUART1) 145 #undef DEBUG_TI81XXUART1_FLAGS 146 #define DEBUG_TI81XXUART1_FLAGS DEBUG_OMAPUART_FLAGS 147 #elif defined(CONFIG_DEBUG_TI81XXUART2) 148 #undef DEBUG_TI81XXUART2_FLAGS 149 #define DEBUG_TI81XXUART2_FLAGS DEBUG_OMAPUART_FLAGS 150 #elif defined(CONFIG_DEBUG_TI81XXUART3) 151 #undef DEBUG_TI81XXUART3_FLAGS 152 #define DEBUG_TI81XXUART3_FLAGS DEBUG_OMAPUART_FLAGS 153 #elif defined(CONFIG_DEBUG_AM33XXUART1) 154 #undef DEBUG_AM33XXUART1_FLAGS 155 #define DEBUG_AM33XXUART1_FLAGS DEBUG_OMAPUART_FLAGS 156 #endif 157 158 /** 159 * struct omap_hwmod_rst_info - IPs reset lines use by hwmod 160 * @name: name of the reset line (module local name) 161 * @rst_shift: Offset of the reset bit 162 * @st_shift: Offset of the reset status bit (OMAP2/3 only) 163 * 164 * @name should be something short, e.g., "cpu0" or "rst". It is defined 165 * locally to the hwmod. 166 */ 167 struct omap_hwmod_rst_info { 168 const char *name; 169 u8 rst_shift; 170 u8 st_shift; 171 }; 172 173 /** 174 * struct omap_hwmod_opt_clk - optional clocks used by this hwmod 175 * @role: "sys", "32k", "tv", etc -- for use in clk_get() 176 * @clk: opt clock: OMAP clock name 177 * @_clk: pointer to the struct clk (filled in at runtime) 178 * 179 * The module's interface clock and main functional clock should not 180 * be added as optional clocks. 181 */ 182 struct omap_hwmod_opt_clk { 183 const char *role; 184 const char *clk; 185 struct clk *_clk; 186 }; 187 188 189 /* omap_hwmod_omap2_firewall.flags bits */ 190 #define OMAP_FIREWALL_L3 (1 << 0) 191 #define OMAP_FIREWALL_L4 (1 << 1) 192 193 /** 194 * struct omap_hwmod_omap2_firewall - OMAP2/3 device firewall data 195 * @l3_perm_bit: bit shift for L3_PM_*_PERMISSION_* 196 * @l4_fw_region: L4 firewall region ID 197 * @l4_prot_group: L4 protection group ID 198 * @flags: (see omap_hwmod_omap2_firewall.flags macros above) 199 */ 200 struct omap_hwmod_omap2_firewall { 201 u8 l3_perm_bit; 202 u8 l4_fw_region; 203 u8 l4_prot_group; 204 u8 flags; 205 }; 206 207 /* 208 * omap_hwmod_ocp_if.user bits: these indicate the initiators that use this 209 * interface to interact with the hwmod. Used to add sleep dependencies 210 * when the module is enabled or disabled. 211 */ 212 #define OCP_USER_MPU (1 << 0) 213 #define OCP_USER_SDMA (1 << 1) 214 #define OCP_USER_DSP (1 << 2) 215 #define OCP_USER_IVA (1 << 3) 216 217 /* omap_hwmod_ocp_if.flags bits */ 218 #define OCPIF_SWSUP_IDLE (1 << 0) 219 #define OCPIF_CAN_BURST (1 << 1) 220 221 /* omap_hwmod_ocp_if._int_flags possibilities */ 222 #define _OCPIF_INT_FLAGS_REGISTERED (1 << 0) 223 224 225 /** 226 * struct omap_hwmod_ocp_if - OCP interface data 227 * @master: struct omap_hwmod that initiates OCP transactions on this link 228 * @slave: struct omap_hwmod that responds to OCP transactions on this link 229 * @addr: address space associated with this link 230 * @clk: interface clock: OMAP clock name 231 * @_clk: pointer to the interface struct clk (filled in at runtime) 232 * @fw: interface firewall data 233 * @width: OCP data width 234 * @user: initiators using this interface (see OCP_USER_* macros above) 235 * @flags: OCP interface flags (see OCPIF_* macros above) 236 * @_int_flags: internal flags (see _OCPIF_INT_FLAGS* macros above) 237 * 238 * It may also be useful to add a tag_cnt field for OCP2.x devices. 239 * 240 * Parameter names beginning with an underscore are managed internally by 241 * the omap_hwmod code and should not be set during initialization. 242 */ 243 struct omap_hwmod_ocp_if { 244 struct omap_hwmod *master; 245 struct omap_hwmod *slave; 246 struct omap_hwmod_addr_space *addr; 247 const char *clk; 248 struct clk *_clk; 249 struct list_head node; 250 union { 251 struct omap_hwmod_omap2_firewall omap2; 252 } fw; 253 u8 width; 254 u8 user; 255 u8 flags; 256 u8 _int_flags; 257 }; 258 259 260 /* Macros for use in struct omap_hwmod_sysconfig */ 261 262 /* Flags for use in omap_hwmod_sysconfig.idlemodes */ 263 #define MASTER_STANDBY_SHIFT 4 264 #define SLAVE_IDLE_SHIFT 0 265 #define SIDLE_FORCE (HWMOD_IDLEMODE_FORCE << SLAVE_IDLE_SHIFT) 266 #define SIDLE_NO (HWMOD_IDLEMODE_NO << SLAVE_IDLE_SHIFT) 267 #define SIDLE_SMART (HWMOD_IDLEMODE_SMART << SLAVE_IDLE_SHIFT) 268 #define SIDLE_SMART_WKUP (HWMOD_IDLEMODE_SMART_WKUP << SLAVE_IDLE_SHIFT) 269 #define MSTANDBY_FORCE (HWMOD_IDLEMODE_FORCE << MASTER_STANDBY_SHIFT) 270 #define MSTANDBY_NO (HWMOD_IDLEMODE_NO << MASTER_STANDBY_SHIFT) 271 #define MSTANDBY_SMART (HWMOD_IDLEMODE_SMART << MASTER_STANDBY_SHIFT) 272 #define MSTANDBY_SMART_WKUP (HWMOD_IDLEMODE_SMART_WKUP << MASTER_STANDBY_SHIFT) 273 274 /* omap_hwmod_sysconfig.sysc_flags capability flags */ 275 #define SYSC_HAS_AUTOIDLE (1 << 0) 276 #define SYSC_HAS_SOFTRESET (1 << 1) 277 #define SYSC_HAS_ENAWAKEUP (1 << 2) 278 #define SYSC_HAS_EMUFREE (1 << 3) 279 #define SYSC_HAS_CLOCKACTIVITY (1 << 4) 280 #define SYSC_HAS_SIDLEMODE (1 << 5) 281 #define SYSC_HAS_MIDLEMODE (1 << 6) 282 #define SYSS_HAS_RESET_STATUS (1 << 7) 283 #define SYSC_NO_CACHE (1 << 8) /* XXX SW flag, belongs elsewhere */ 284 #define SYSC_HAS_RESET_STATUS (1 << 9) 285 #define SYSC_HAS_DMADISABLE (1 << 10) 286 287 /* omap_hwmod_sysconfig.clockact flags */ 288 #define CLOCKACT_TEST_BOTH 0x0 289 #define CLOCKACT_TEST_MAIN 0x1 290 #define CLOCKACT_TEST_ICLK 0x2 291 #define CLOCKACT_TEST_NONE 0x3 292 293 /** 294 * struct omap_hwmod_class_sysconfig - hwmod class OCP_SYS* data 295 * @rev_offs: IP block revision register offset (from module base addr) 296 * @sysc_offs: OCP_SYSCONFIG register offset (from module base addr) 297 * @syss_offs: OCP_SYSSTATUS register offset (from module base addr) 298 * @srst_udelay: Delay needed after doing a softreset in usecs 299 * @idlemodes: One or more of {SIDLE,MSTANDBY}_{OFF,FORCE,SMART} 300 * @sysc_flags: SYS{C,S}_HAS* flags indicating SYSCONFIG bits supported 301 * @clockact: the default value of the module CLOCKACTIVITY bits 302 * 303 * @clockact describes to the module which clocks are likely to be 304 * disabled when the PRCM issues its idle request to the module. Some 305 * modules have separate clockdomains for the interface clock and main 306 * functional clock, and can check whether they should acknowledge the 307 * idle request based on the internal module functionality that has 308 * been associated with the clocks marked in @clockact. This field is 309 * only used if HWMOD_SET_DEFAULT_CLOCKACT is set (see below) 310 * 311 * @sysc_fields: structure containing the offset positions of various bits in 312 * SYSCONFIG register. This can be populated using omap_hwmod_sysc_type1 or 313 * omap_hwmod_sysc_type2 defined in omap_hwmod_common_data.c depending on 314 * whether the device ip is compliant with the original PRCM protocol 315 * defined for OMAP2420 or the new PRCM protocol for new OMAP4 IPs. 316 * If the device follows a different scheme for the sysconfig register , 317 * then this field has to be populated with the correct offset structure. 318 */ 319 struct omap_hwmod_class_sysconfig { 320 s32 rev_offs; 321 s32 sysc_offs; 322 s32 syss_offs; 323 u16 sysc_flags; 324 struct sysc_regbits *sysc_fields; 325 u8 srst_udelay; 326 u8 idlemodes; 327 }; 328 329 /** 330 * struct omap_hwmod_omap2_prcm - OMAP2/3-specific PRCM data 331 * @module_offs: PRCM submodule offset from the start of the PRM/CM 332 * @idlest_reg_id: IDLEST register ID (e.g., 3 for CM_IDLEST3) 333 * @idlest_idle_bit: register bit shift for CM_IDLEST slave idle bit 334 * 335 * @prcm_reg_id and @module_bit are specific to the AUTOIDLE, WKST, 336 * WKEN, GRPSEL registers. In an ideal world, no extra information 337 * would be needed for IDLEST information, but alas, there are some 338 * exceptions, so @idlest_reg_id, @idlest_idle_bit, @idlest_stdby_bit 339 * are needed for the IDLEST registers (c.f. 2430 I2CHS, 3430 USBHOST) 340 */ 341 struct omap_hwmod_omap2_prcm { 342 s16 module_offs; 343 u8 idlest_reg_id; 344 u8 idlest_idle_bit; 345 }; 346 347 /* 348 * Possible values for struct omap_hwmod_omap4_prcm.flags 349 * 350 * HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT: Some IP blocks don't have a PRCM 351 * module-level context loss register associated with them; this 352 * flag bit should be set in those cases 353 * HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET: Some IP blocks have a valid CLKCTRL 354 * offset of zero; this flag bit should be set in those cases to 355 * distinguish from hwmods that have no clkctrl offset. 356 * HWMOD_OMAP4_CLKFWK_CLKCTR_CLOCK: Module clockctrl clock is managed 357 * by the common clock framework and not hwmod. 358 */ 359 #define HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT (1 << 0) 360 #define HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET (1 << 1) 361 #define HWMOD_OMAP4_CLKFWK_CLKCTR_CLOCK (1 << 2) 362 363 /** 364 * struct omap_hwmod_omap4_prcm - OMAP4-specific PRCM data 365 * @clkctrl_offs: offset of the PRCM clock control register 366 * @rstctrl_offs: offset of the XXX_RSTCTRL register located in the PRM 367 * @context_offs: offset of the RM_*_CONTEXT register 368 * @lostcontext_mask: bitmask for selecting bits from RM_*_CONTEXT register 369 * @rstst_reg: (AM33XX only) address of the XXX_RSTST register in the PRM 370 * @submodule_wkdep_bit: bit shift of the WKDEP range 371 * @flags: PRCM register capabilities for this IP block 372 * @modulemode: allowable modulemodes 373 * @context_lost_counter: Count of module level context lost 374 * 375 * If @lostcontext_mask is not defined, context loss check code uses 376 * whole register without masking. @lostcontext_mask should only be 377 * defined in cases where @context_offs register is shared by two or 378 * more hwmods. 379 */ 380 struct omap_hwmod_omap4_prcm { 381 u16 clkctrl_offs; 382 u16 rstctrl_offs; 383 u16 rstst_offs; 384 u16 context_offs; 385 u32 lostcontext_mask; 386 u8 submodule_wkdep_bit; 387 u8 modulemode; 388 u8 flags; 389 int context_lost_counter; 390 }; 391 392 393 /* 394 * omap_hwmod.flags definitions 395 * 396 * HWMOD_SWSUP_SIDLE: omap_hwmod code should manually bring module in and out 397 * of idle, rather than relying on module smart-idle 398 * HWMOD_SWSUP_MSTANDBY: omap_hwmod code should manually bring module in and 399 * out of standby, rather than relying on module smart-standby 400 * HWMOD_INIT_NO_RESET: don't reset this module at boot - important for 401 * SDRAM controller, etc. XXX probably belongs outside the main hwmod file 402 * XXX Should be HWMOD_SETUP_NO_RESET 403 * HWMOD_INIT_NO_IDLE: don't idle this module at boot - important for SDRAM 404 * controller, etc. XXX probably belongs outside the main hwmod file 405 * XXX Should be HWMOD_SETUP_NO_IDLE 406 * HWMOD_NO_OCP_AUTOIDLE: disable module autoidle (OCP_SYSCONFIG.AUTOIDLE) 407 * when module is enabled, rather than the default, which is to 408 * enable autoidle 409 * HWMOD_SET_DEFAULT_CLOCKACT: program CLOCKACTIVITY bits at startup 410 * HWMOD_NO_IDLEST: this module does not have idle status - this is the case 411 * only for few initiator modules on OMAP2 & 3. 412 * HWMOD_CONTROL_OPT_CLKS_IN_RESET: Enable all optional clocks during reset. 413 * This is needed for devices like DSS that require optional clocks enabled 414 * in order to complete the reset. Optional clocks will be disabled 415 * again after the reset. 416 * HWMOD_16BIT_REG: Module has 16bit registers 417 * HWMOD_EXT_OPT_MAIN_CLK: The only main functional clock source for 418 * this IP block comes from an off-chip source and is not always 419 * enabled. This prevents the hwmod code from being able to 420 * enable and reset the IP block early. XXX Eventually it should 421 * be possible to query the clock framework for this information. 422 * HWMOD_BLOCK_WFI: Some OMAP peripherals apparently don't work 423 * correctly if the MPU is allowed to go idle while the 424 * peripherals are active. This is apparently true for the I2C on 425 * OMAP2420, and also the EMAC on AM3517/3505. It's unlikely that 426 * this is really true -- we're probably not configuring something 427 * correctly, or this is being abused to deal with some PM latency 428 * issues -- but we're currently suffering from a shortage of 429 * folks who are able to track these issues down properly. 430 * HWMOD_FORCE_MSTANDBY: Always keep MIDLEMODE bits cleared so that device 431 * is kept in force-standby mode. Failing to do so causes PM problems 432 * with musb on OMAP3630 at least. Note that musb has a dedicated register 433 * to control MSTANDBY signal when MIDLEMODE is set to force-standby. 434 * HWMOD_SWSUP_SIDLE_ACT: omap_hwmod code should manually bring the module 435 * out of idle, but rely on smart-idle to the put it back in idle, 436 * so the wakeups are still functional (Only known case for now is UART) 437 * HWMOD_RECONFIG_IO_CHAIN: omap_hwmod code needs to reconfigure wake-up 438 * events by calling _reconfigure_io_chain() when a device is enabled 439 * or idled. 440 * HWMOD_OPT_CLKS_NEEDED: The optional clocks are needed for the module to 441 * operate and they need to be handled at the same time as the main_clk. 442 * HWMOD_NO_IDLE: Do not idle the hwmod at all. Useful to handle certain 443 * IPs like CPSW on DRA7, where clocks to this module cannot be disabled. 444 * HWMOD_CLKDM_NOAUTO: Allows the hwmod's clockdomain to be prevented from 445 * entering HW_AUTO while hwmod is active. This is needed to workaround 446 * some modules which don't function correctly with HW_AUTO. For example, 447 * DCAN on DRA7x SoC needs this to workaround errata i893. 448 */ 449 #define HWMOD_SWSUP_SIDLE (1 << 0) 450 #define HWMOD_SWSUP_MSTANDBY (1 << 1) 451 #define HWMOD_INIT_NO_RESET (1 << 2) 452 #define HWMOD_INIT_NO_IDLE (1 << 3) 453 #define HWMOD_NO_OCP_AUTOIDLE (1 << 4) 454 #define HWMOD_SET_DEFAULT_CLOCKACT (1 << 5) 455 #define HWMOD_NO_IDLEST (1 << 6) 456 #define HWMOD_CONTROL_OPT_CLKS_IN_RESET (1 << 7) 457 #define HWMOD_16BIT_REG (1 << 8) 458 #define HWMOD_EXT_OPT_MAIN_CLK (1 << 9) 459 #define HWMOD_BLOCK_WFI (1 << 10) 460 #define HWMOD_FORCE_MSTANDBY (1 << 11) 461 #define HWMOD_SWSUP_SIDLE_ACT (1 << 12) 462 #define HWMOD_RECONFIG_IO_CHAIN (1 << 13) 463 #define HWMOD_OPT_CLKS_NEEDED (1 << 14) 464 #define HWMOD_NO_IDLE (1 << 15) 465 #define HWMOD_CLKDM_NOAUTO (1 << 16) 466 467 /* 468 * omap_hwmod._int_flags definitions 469 * These are for internal use only and are managed by the omap_hwmod code. 470 * 471 * _HWMOD_NO_MPU_PORT: no path exists for the MPU to write to this module 472 * _HWMOD_SYSCONFIG_LOADED: set when the OCP_SYSCONFIG value has been cached 473 * _HWMOD_SKIP_ENABLE: set if hwmod enabled during init (HWMOD_INIT_NO_IDLE) - 474 * causes the first call to _enable() to only update the pinmux 475 */ 476 #define _HWMOD_NO_MPU_PORT (1 << 0) 477 #define _HWMOD_SYSCONFIG_LOADED (1 << 1) 478 #define _HWMOD_SKIP_ENABLE (1 << 2) 479 480 /* 481 * omap_hwmod._state definitions 482 * 483 * INITIALIZED: reset (optionally), initialized, enabled, disabled 484 * (optionally) 485 * 486 * 487 */ 488 #define _HWMOD_STATE_UNKNOWN 0 489 #define _HWMOD_STATE_REGISTERED 1 490 #define _HWMOD_STATE_CLKS_INITED 2 491 #define _HWMOD_STATE_INITIALIZED 3 492 #define _HWMOD_STATE_ENABLED 4 493 #define _HWMOD_STATE_IDLE 5 494 #define _HWMOD_STATE_DISABLED 6 495 496 #ifdef CONFIG_PM 497 #define _HWMOD_STATE_DEFAULT _HWMOD_STATE_IDLE 498 #else 499 #define _HWMOD_STATE_DEFAULT _HWMOD_STATE_ENABLED 500 #endif 501 502 /** 503 * struct omap_hwmod_class - the type of an IP block 504 * @name: name of the hwmod_class 505 * @sysc: device SYSCONFIG/SYSSTATUS register data 506 * @pre_shutdown: ptr to fn to be executed immediately prior to device shutdown 507 * @reset: ptr to fn to be executed in place of the standard hwmod reset fn 508 * @enable_preprogram: ptr to fn to be executed during device enable 509 * @lock: ptr to fn to be executed to lock IP registers 510 * @unlock: ptr to fn to be executed to unlock IP registers 511 * 512 * Represent the class of a OMAP hardware "modules" (e.g. timer, 513 * smartreflex, gpio, uart...) 514 * 515 * @pre_shutdown is a function that will be run immediately before 516 * hwmod clocks are disabled, etc. It is intended for use for hwmods 517 * like the MPU watchdog, which cannot be disabled with the standard 518 * omap_hwmod_shutdown(). The function should return 0 upon success, 519 * or some negative error upon failure. Returning an error will cause 520 * omap_hwmod_shutdown() to abort the device shutdown and return an 521 * error. 522 * 523 * If @reset is defined, then the function it points to will be 524 * executed in place of the standard hwmod _reset() code in 525 * mach-omap2/omap_hwmod.c. This is needed for IP blocks which have 526 * unusual reset sequences - usually processor IP blocks like the IVA. 527 */ 528 struct omap_hwmod_class { 529 const char *name; 530 struct omap_hwmod_class_sysconfig *sysc; 531 int (*pre_shutdown)(struct omap_hwmod *oh); 532 int (*reset)(struct omap_hwmod *oh); 533 int (*enable_preprogram)(struct omap_hwmod *oh); 534 void (*lock)(struct omap_hwmod *oh); 535 void (*unlock)(struct omap_hwmod *oh); 536 }; 537 538 /** 539 * struct omap_hwmod - integration data for OMAP hardware "modules" (IP blocks) 540 * @name: name of the hwmod 541 * @class: struct omap_hwmod_class * to the class of this hwmod 542 * @od: struct omap_device currently associated with this hwmod (internal use) 543 * @prcm: PRCM data pertaining to this hwmod 544 * @main_clk: main clock: OMAP clock name 545 * @_clk: pointer to the main struct clk (filled in at runtime) 546 * @opt_clks: other device clocks that drivers can request (0..*) 547 * @voltdm: pointer to voltage domain (filled in at runtime) 548 * @dev_attr: arbitrary device attributes that can be passed to the driver 549 * @_sysc_cache: internal-use hwmod flags 550 * @mpu_rt_idx: index of device address space for register target (for DT boot) 551 * @_mpu_rt_va: cached register target start address (internal use) 552 * @_mpu_port: cached MPU register target slave (internal use) 553 * @opt_clks_cnt: number of @opt_clks 554 * @master_cnt: number of @master entries 555 * @slaves_cnt: number of @slave entries 556 * @response_lat: device OCP response latency (in interface clock cycles) 557 * @_int_flags: internal-use hwmod flags 558 * @_state: internal-use hwmod state 559 * @_postsetup_state: internal-use state to leave the hwmod in after _setup() 560 * @flags: hwmod flags (documented below) 561 * @_lock: spinlock serializing operations on this hwmod 562 * @node: list node for hwmod list (internal use) 563 * @parent_hwmod: (temporary) a pointer to the hierarchical parent of this hwmod 564 * 565 * @main_clk refers to this module's "main clock," which for our 566 * purposes is defined as "the functional clock needed for register 567 * accesses to complete." Modules may not have a main clock if the 568 * interface clock also serves as a main clock. 569 * 570 * Parameter names beginning with an underscore are managed internally by 571 * the omap_hwmod code and should not be set during initialization. 572 * 573 * @masters and @slaves are now deprecated. 574 * 575 * @parent_hwmod is temporary; there should be no need for it, as this 576 * information should already be expressed in the OCP interface 577 * structures. @parent_hwmod is present as a workaround until we improve 578 * handling for hwmods with multiple parents (e.g., OMAP4+ DSS with 579 * multiple register targets across different interconnects). 580 */ 581 struct omap_hwmod { 582 const char *name; 583 struct omap_hwmod_class *class; 584 struct omap_device *od; 585 struct omap_hwmod_rst_info *rst_lines; 586 union { 587 struct omap_hwmod_omap2_prcm omap2; 588 struct omap_hwmod_omap4_prcm omap4; 589 } prcm; 590 const char *main_clk; 591 struct clk *_clk; 592 struct omap_hwmod_opt_clk *opt_clks; 593 const char *clkdm_name; 594 struct clockdomain *clkdm; 595 struct list_head slave_ports; /* connect to *_TA */ 596 void *dev_attr; 597 u32 _sysc_cache; 598 void __iomem *_mpu_rt_va; 599 spinlock_t _lock; 600 struct lock_class_key hwmod_key; /* unique lock class */ 601 struct list_head node; 602 struct omap_hwmod_ocp_if *_mpu_port; 603 u32 flags; 604 u8 mpu_rt_idx; 605 u8 response_lat; 606 u8 rst_lines_cnt; 607 u8 opt_clks_cnt; 608 u8 slaves_cnt; 609 u8 hwmods_cnt; 610 u8 _int_flags; 611 u8 _state; 612 u8 _postsetup_state; 613 struct omap_hwmod *parent_hwmod; 614 }; 615 616 struct device_node; 617 618 struct omap_hwmod *omap_hwmod_lookup(const char *name); 619 int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh, void *data), 620 void *data); 621 622 int __init omap_hwmod_setup_one(const char *name); 623 int omap_hwmod_parse_module_range(struct omap_hwmod *oh, 624 struct device_node *np, 625 struct resource *res); 626 627 struct ti_sysc_module_data; 628 struct ti_sysc_cookie; 629 630 int omap_hwmod_init_module(struct device *dev, 631 const struct ti_sysc_module_data *data, 632 struct ti_sysc_cookie *cookie); 633 634 int omap_hwmod_enable(struct omap_hwmod *oh); 635 int omap_hwmod_idle(struct omap_hwmod *oh); 636 int omap_hwmod_shutdown(struct omap_hwmod *oh); 637 638 int omap_hwmod_assert_hardreset(struct omap_hwmod *oh, const char *name); 639 int omap_hwmod_deassert_hardreset(struct omap_hwmod *oh, const char *name); 640 641 void omap_hwmod_write(u32 v, struct omap_hwmod *oh, u16 reg_offs); 642 u32 omap_hwmod_read(struct omap_hwmod *oh, u16 reg_offs); 643 int omap_hwmod_softreset(struct omap_hwmod *oh); 644 645 int omap_hwmod_count_resources(struct omap_hwmod *oh, unsigned long flags); 646 int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res); 647 int omap_hwmod_get_resource_byname(struct omap_hwmod *oh, unsigned int type, 648 const char *name, struct resource *res); 649 650 struct powerdomain *omap_hwmod_get_pwrdm(struct omap_hwmod *oh); 651 void __iomem *omap_hwmod_get_mpu_rt_va(struct omap_hwmod *oh); 652 653 int omap_hwmod_enable_wakeup(struct omap_hwmod *oh); 654 int omap_hwmod_disable_wakeup(struct omap_hwmod *oh); 655 656 int omap_hwmod_for_each_by_class(const char *classname, 657 int (*fn)(struct omap_hwmod *oh, 658 void *user), 659 void *user); 660 661 int omap_hwmod_set_postsetup_state(struct omap_hwmod *oh, u8 state); 662 int omap_hwmod_get_context_loss_count(struct omap_hwmod *oh); 663 664 extern void __init omap_hwmod_init(void); 665 666 const char *omap_hwmod_get_main_clk(struct omap_hwmod *oh); 667 668 /* 669 * 670 */ 671 672 extern int omap_hwmod_aess_preprogram(struct omap_hwmod *oh); 673 void omap_hwmod_rtc_unlock(struct omap_hwmod *oh); 674 void omap_hwmod_rtc_lock(struct omap_hwmod *oh); 675 676 /* 677 * Chip variant-specific hwmod init routines - XXX should be converted 678 * to use initcalls once the initial boot ordering is straightened out 679 */ 680 extern int omap2420_hwmod_init(void); 681 extern int omap2430_hwmod_init(void); 682 extern int omap3xxx_hwmod_init(void); 683 extern int omap44xx_hwmod_init(void); 684 extern int omap54xx_hwmod_init(void); 685 extern int am33xx_hwmod_init(void); 686 extern int dm814x_hwmod_init(void); 687 extern int dm816x_hwmod_init(void); 688 extern int dra7xx_hwmod_init(void); 689 int am43xx_hwmod_init(void); 690 691 extern int __init omap_hwmod_register_links(struct omap_hwmod_ocp_if **ois); 692 693 #endif 694