1/*
2 * Secondary CPU startup routine source file.
3 *
4 * Copyright (C) 2009 Texas Instruments, Inc.
5 *
6 * Author:
7 *      Santosh Shilimkar <santosh.shilimkar@ti.com>
8 *
9 * Interface functions needed for the SMP. This file is based on arm
10 * realview smp platform.
11 * Copyright (c) 2003 ARM Limited.
12 *
13 * This program is free software,you can redistribute it and/or modify
14 * it under the terms of the GNU General Public License version 2 as
15 * published by the Free Software Foundation.
16 */
17
18#include <linux/linkage.h>
19#include <linux/init.h>
20
21	__CPUINIT
22
23/* Physical address needed since MMU not enabled yet on secondary core */
24#define AUX_CORE_BOOT0_PA			0x48281800
25
26/*
27 * OMAP5 specific entry point for secondary CPU to jump from ROM
28 * code.  This routine also provides a holding flag into which
29 * secondary core is held until we're ready for it to initialise.
30 * The primary core will update this flag using a hardware
31+ * register AuxCoreBoot0.
32 */
33ENTRY(omap5_secondary_startup)
34wait:	ldr	r2, =AUX_CORE_BOOT0_PA	@ read from AuxCoreBoot0
35	ldr	r0, [r2]
36	mov	r0, r0, lsr #5
37	mrc	p15, 0, r4, c0, c0, 5
38	and	r4, r4, #0x0f
39	cmp	r0, r4
40	bne	wait
41	b	secondary_startup
42END(omap5_secondary_startup)
43/*
44 * OMAP4 specific entry point for secondary CPU to jump from ROM
45 * code.  This routine also provides a holding flag into which
46 * secondary core is held until we're ready for it to initialise.
47 * The primary core will update this flag using a hardware
48 * register AuxCoreBoot0.
49 */
50ENTRY(omap_secondary_startup)
51hold:	ldr	r12,=0x103
52	dsb
53	smc	#0			@ read from AuxCoreBoot0
54	mov	r0, r0, lsr #9
55	mrc	p15, 0, r4, c0, c0, 5
56	and	r4, r4, #0x0f
57	cmp	r0, r4
58	bne	hold
59
60	/*
61	 * we've been released from the wait loop,secondary_stack
62	 * should now contain the SVC stack for this core
63	 */
64	b	secondary_startup
65ENDPROC(omap_secondary_startup)
66
67