1 /* 2 * linux/arch/arm/mach-omap2/id.c 3 * 4 * OMAP2 CPU identification code 5 * 6 * Copyright (C) 2005 Nokia Corporation 7 * Written by Tony Lindgren <tony@atomide.com> 8 * 9 * Copyright (C) 2009-11 Texas Instruments 10 * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com> 11 * 12 * This program is free software; you can redistribute it and/or modify 13 * it under the terms of the GNU General Public License version 2 as 14 * published by the Free Software Foundation. 15 */ 16 17 #include <linux/module.h> 18 #include <linux/kernel.h> 19 #include <linux/init.h> 20 #include <linux/io.h> 21 #include <linux/random.h> 22 #include <linux/slab.h> 23 24 #ifdef CONFIG_SOC_BUS 25 #include <linux/sys_soc.h> 26 #endif 27 28 #include <asm/cputype.h> 29 30 #include "common.h" 31 32 #include "id.h" 33 34 #include "soc.h" 35 #include "control.h" 36 37 #define OMAP4_SILICON_TYPE_STANDARD 0x01 38 #define OMAP4_SILICON_TYPE_PERFORMANCE 0x02 39 40 #define OMAP_SOC_MAX_NAME_LENGTH 16 41 42 static unsigned int omap_revision; 43 static char soc_name[OMAP_SOC_MAX_NAME_LENGTH]; 44 static char soc_rev[OMAP_SOC_MAX_NAME_LENGTH]; 45 u32 omap_features; 46 47 unsigned int omap_rev(void) 48 { 49 return omap_revision; 50 } 51 EXPORT_SYMBOL(omap_rev); 52 53 int omap_type(void) 54 { 55 u32 val = 0; 56 57 if (cpu_is_omap24xx()) { 58 val = omap_ctrl_readl(OMAP24XX_CONTROL_STATUS); 59 } else if (soc_is_am33xx() || soc_is_am43xx()) { 60 val = omap_ctrl_readl(AM33XX_CONTROL_STATUS); 61 } else if (cpu_is_omap34xx()) { 62 val = omap_ctrl_readl(OMAP343X_CONTROL_STATUS); 63 } else if (cpu_is_omap44xx()) { 64 val = omap_ctrl_readl(OMAP4_CTRL_MODULE_CORE_STATUS); 65 } else if (soc_is_omap54xx() || soc_is_dra7xx()) { 66 val = omap_ctrl_readl(OMAP5XXX_CONTROL_STATUS); 67 val &= OMAP5_DEVICETYPE_MASK; 68 val >>= 6; 69 goto out; 70 } else { 71 pr_err("Cannot detect omap type!\n"); 72 goto out; 73 } 74 75 val &= OMAP2_DEVICETYPE_MASK; 76 val >>= 8; 77 78 out: 79 return val; 80 } 81 EXPORT_SYMBOL(omap_type); 82 83 84 /*----------------------------------------------------------------------------*/ 85 86 #define OMAP_TAP_IDCODE 0x0204 87 #define OMAP_TAP_DIE_ID_0 0x0218 88 #define OMAP_TAP_DIE_ID_1 0x021C 89 #define OMAP_TAP_DIE_ID_2 0x0220 90 #define OMAP_TAP_DIE_ID_3 0x0224 91 92 #define OMAP_TAP_DIE_ID_44XX_0 0x0200 93 #define OMAP_TAP_DIE_ID_44XX_1 0x0208 94 #define OMAP_TAP_DIE_ID_44XX_2 0x020c 95 #define OMAP_TAP_DIE_ID_44XX_3 0x0210 96 97 #define read_tap_reg(reg) readl_relaxed(tap_base + (reg)) 98 99 struct omap_id { 100 u16 hawkeye; /* Silicon type (Hawkeye id) */ 101 u8 dev; /* Device type from production_id reg */ 102 u32 type; /* Combined type id copied to omap_revision */ 103 }; 104 105 /* Register values to detect the OMAP version */ 106 static struct omap_id omap_ids[] __initdata = { 107 { .hawkeye = 0xb5d9, .dev = 0x0, .type = 0x24200024 }, 108 { .hawkeye = 0xb5d9, .dev = 0x1, .type = 0x24201024 }, 109 { .hawkeye = 0xb5d9, .dev = 0x2, .type = 0x24202024 }, 110 { .hawkeye = 0xb5d9, .dev = 0x4, .type = 0x24220024 }, 111 { .hawkeye = 0xb5d9, .dev = 0x8, .type = 0x24230024 }, 112 { .hawkeye = 0xb68a, .dev = 0x0, .type = 0x24300024 }, 113 }; 114 115 static void __iomem *tap_base; 116 static u16 tap_prod_id; 117 118 void omap_get_die_id(struct omap_die_id *odi) 119 { 120 if (cpu_is_omap44xx() || soc_is_omap54xx() || soc_is_dra7xx()) { 121 odi->id_0 = read_tap_reg(OMAP_TAP_DIE_ID_44XX_0); 122 odi->id_1 = read_tap_reg(OMAP_TAP_DIE_ID_44XX_1); 123 odi->id_2 = read_tap_reg(OMAP_TAP_DIE_ID_44XX_2); 124 odi->id_3 = read_tap_reg(OMAP_TAP_DIE_ID_44XX_3); 125 126 return; 127 } 128 odi->id_0 = read_tap_reg(OMAP_TAP_DIE_ID_0); 129 odi->id_1 = read_tap_reg(OMAP_TAP_DIE_ID_1); 130 odi->id_2 = read_tap_reg(OMAP_TAP_DIE_ID_2); 131 odi->id_3 = read_tap_reg(OMAP_TAP_DIE_ID_3); 132 } 133 134 static int __init omap_feed_randpool(void) 135 { 136 struct omap_die_id odi; 137 138 /* Throw the die ID into the entropy pool at boot */ 139 omap_get_die_id(&odi); 140 add_device_randomness(&odi, sizeof(odi)); 141 return 0; 142 } 143 omap_device_initcall(omap_feed_randpool); 144 145 void __init omap2xxx_check_revision(void) 146 { 147 int i, j; 148 u32 idcode, prod_id; 149 u16 hawkeye; 150 u8 dev_type, rev; 151 struct omap_die_id odi; 152 153 idcode = read_tap_reg(OMAP_TAP_IDCODE); 154 prod_id = read_tap_reg(tap_prod_id); 155 hawkeye = (idcode >> 12) & 0xffff; 156 rev = (idcode >> 28) & 0x0f; 157 dev_type = (prod_id >> 16) & 0x0f; 158 omap_get_die_id(&odi); 159 160 pr_debug("OMAP_TAP_IDCODE 0x%08x REV %i HAWKEYE 0x%04x MANF %03x\n", 161 idcode, rev, hawkeye, (idcode >> 1) & 0x7ff); 162 pr_debug("OMAP_TAP_DIE_ID_0: 0x%08x\n", odi.id_0); 163 pr_debug("OMAP_TAP_DIE_ID_1: 0x%08x DEV_REV: %i\n", 164 odi.id_1, (odi.id_1 >> 28) & 0xf); 165 pr_debug("OMAP_TAP_DIE_ID_2: 0x%08x\n", odi.id_2); 166 pr_debug("OMAP_TAP_DIE_ID_3: 0x%08x\n", odi.id_3); 167 pr_debug("OMAP_TAP_PROD_ID_0: 0x%08x DEV_TYPE: %i\n", 168 prod_id, dev_type); 169 170 /* Check hawkeye ids */ 171 for (i = 0; i < ARRAY_SIZE(omap_ids); i++) { 172 if (hawkeye == omap_ids[i].hawkeye) 173 break; 174 } 175 176 if (i == ARRAY_SIZE(omap_ids)) { 177 printk(KERN_ERR "Unknown OMAP CPU id\n"); 178 return; 179 } 180 181 for (j = i; j < ARRAY_SIZE(omap_ids); j++) { 182 if (dev_type == omap_ids[j].dev) 183 break; 184 } 185 186 if (j == ARRAY_SIZE(omap_ids)) { 187 pr_err("Unknown OMAP device type. Handling it as OMAP%04x\n", 188 omap_ids[i].type >> 16); 189 j = i; 190 } 191 192 sprintf(soc_name, "OMAP%04x", omap_rev() >> 16); 193 sprintf(soc_rev, "ES%x", (omap_rev() >> 12) & 0xf); 194 195 pr_info("%s", soc_name); 196 if ((omap_rev() >> 8) & 0x0f) 197 pr_info("%s", soc_rev); 198 pr_info("\n"); 199 } 200 201 #define OMAP3_SHOW_FEATURE(feat) \ 202 if (omap3_has_ ##feat()) \ 203 printk(#feat" "); 204 205 static void __init omap3_cpuinfo(void) 206 { 207 const char *cpu_name; 208 209 /* 210 * OMAP3430 and OMAP3530 are assumed to be same. 211 * 212 * OMAP3525, OMAP3515 and OMAP3503 can be detected only based 213 * on available features. Upon detection, update the CPU id 214 * and CPU class bits. 215 */ 216 if (cpu_is_omap3630()) { 217 cpu_name = "OMAP3630"; 218 } else if (soc_is_am35xx()) { 219 cpu_name = (omap3_has_sgx()) ? "AM3517" : "AM3505"; 220 } else if (cpu_is_ti816x()) { 221 cpu_name = "TI816X"; 222 } else if (soc_is_am335x()) { 223 cpu_name = "AM335X"; 224 } else if (soc_is_am437x()) { 225 cpu_name = "AM437x"; 226 } else if (cpu_is_ti814x()) { 227 cpu_name = "TI814X"; 228 } else if (omap3_has_iva() && omap3_has_sgx()) { 229 /* OMAP3430, OMAP3525, OMAP3515, OMAP3503 devices */ 230 cpu_name = "OMAP3430/3530"; 231 } else if (omap3_has_iva()) { 232 cpu_name = "OMAP3525"; 233 } else if (omap3_has_sgx()) { 234 cpu_name = "OMAP3515"; 235 } else { 236 cpu_name = "OMAP3503"; 237 } 238 239 sprintf(soc_name, "%s", cpu_name); 240 241 /* Print verbose information */ 242 pr_info("%s %s (", soc_name, soc_rev); 243 244 OMAP3_SHOW_FEATURE(l2cache); 245 OMAP3_SHOW_FEATURE(iva); 246 OMAP3_SHOW_FEATURE(sgx); 247 OMAP3_SHOW_FEATURE(neon); 248 OMAP3_SHOW_FEATURE(isp); 249 OMAP3_SHOW_FEATURE(192mhz_clk); 250 251 printk(")\n"); 252 } 253 254 #define OMAP3_CHECK_FEATURE(status,feat) \ 255 if (((status & OMAP3_ ##feat## _MASK) \ 256 >> OMAP3_ ##feat## _SHIFT) != FEAT_ ##feat## _NONE) { \ 257 omap_features |= OMAP3_HAS_ ##feat; \ 258 } 259 260 void __init omap3xxx_check_features(void) 261 { 262 u32 status; 263 264 omap_features = 0; 265 266 status = omap_ctrl_readl(OMAP3_CONTROL_OMAP_STATUS); 267 268 OMAP3_CHECK_FEATURE(status, L2CACHE); 269 OMAP3_CHECK_FEATURE(status, IVA); 270 OMAP3_CHECK_FEATURE(status, SGX); 271 OMAP3_CHECK_FEATURE(status, NEON); 272 OMAP3_CHECK_FEATURE(status, ISP); 273 if (cpu_is_omap3630()) 274 omap_features |= OMAP3_HAS_192MHZ_CLK; 275 if (cpu_is_omap3430() || cpu_is_omap3630()) 276 omap_features |= OMAP3_HAS_IO_WAKEUP; 277 if (cpu_is_omap3630() || omap_rev() == OMAP3430_REV_ES3_1 || 278 omap_rev() == OMAP3430_REV_ES3_1_2) 279 omap_features |= OMAP3_HAS_IO_CHAIN_CTRL; 280 281 omap_features |= OMAP3_HAS_SDRC; 282 283 /* 284 * am35x fixups: 285 * - The am35x Chip ID register has bits 12, 7:5, and 3:2 marked as 286 * reserved and therefore return 0 when read. Unfortunately, 287 * OMAP3_CHECK_FEATURE() will interpret some of those zeroes to 288 * mean that a feature is present even though it isn't so clear 289 * the incorrectly set feature bits. 290 */ 291 if (soc_is_am35xx()) 292 omap_features &= ~(OMAP3_HAS_IVA | OMAP3_HAS_ISP); 293 294 /* 295 * TODO: Get additional info (where applicable) 296 * e.g. Size of L2 cache. 297 */ 298 299 omap3_cpuinfo(); 300 } 301 302 void __init omap4xxx_check_features(void) 303 { 304 u32 si_type; 305 306 si_type = 307 (read_tap_reg(OMAP4_CTRL_MODULE_CORE_STD_FUSE_PROD_ID_1) >> 16) & 0x03; 308 309 if (si_type == OMAP4_SILICON_TYPE_PERFORMANCE) 310 omap_features = OMAP4_HAS_PERF_SILICON; 311 } 312 313 void __init ti81xx_check_features(void) 314 { 315 omap_features = OMAP3_HAS_NEON; 316 omap3_cpuinfo(); 317 } 318 319 void __init am33xx_check_features(void) 320 { 321 u32 status; 322 323 omap_features = OMAP3_HAS_NEON; 324 325 status = omap_ctrl_readl(AM33XX_DEV_FEATURE); 326 if (status & AM33XX_SGX_MASK) 327 omap_features |= OMAP3_HAS_SGX; 328 329 omap3_cpuinfo(); 330 } 331 332 void __init omap3xxx_check_revision(void) 333 { 334 const char *cpu_rev; 335 u32 cpuid, idcode; 336 u16 hawkeye; 337 u8 rev; 338 339 /* 340 * We cannot access revision registers on ES1.0. 341 * If the processor type is Cortex-A8 and the revision is 0x0 342 * it means its Cortex r0p0 which is 3430 ES1.0. 343 */ 344 cpuid = read_cpuid_id(); 345 if ((((cpuid >> 4) & 0xfff) == 0xc08) && ((cpuid & 0xf) == 0x0)) { 346 omap_revision = OMAP3430_REV_ES1_0; 347 cpu_rev = "1.0"; 348 return; 349 } 350 351 /* 352 * Detection for 34xx ES2.0 and above can be done with just 353 * hawkeye and rev. See TRM 1.5.2 Device Identification. 354 * Note that rev does not map directly to our defined processor 355 * revision numbers as ES1.0 uses value 0. 356 */ 357 idcode = read_tap_reg(OMAP_TAP_IDCODE); 358 hawkeye = (idcode >> 12) & 0xffff; 359 rev = (idcode >> 28) & 0xff; 360 361 switch (hawkeye) { 362 case 0xb7ae: 363 /* Handle 34xx/35xx devices */ 364 switch (rev) { 365 case 0: /* Take care of early samples */ 366 case 1: 367 omap_revision = OMAP3430_REV_ES2_0; 368 cpu_rev = "2.0"; 369 break; 370 case 2: 371 omap_revision = OMAP3430_REV_ES2_1; 372 cpu_rev = "2.1"; 373 break; 374 case 3: 375 omap_revision = OMAP3430_REV_ES3_0; 376 cpu_rev = "3.0"; 377 break; 378 case 4: 379 omap_revision = OMAP3430_REV_ES3_1; 380 cpu_rev = "3.1"; 381 break; 382 case 7: 383 /* FALLTHROUGH */ 384 default: 385 /* Use the latest known revision as default */ 386 omap_revision = OMAP3430_REV_ES3_1_2; 387 cpu_rev = "3.1.2"; 388 } 389 break; 390 case 0xb868: 391 /* 392 * Handle OMAP/AM 3505/3517 devices 393 * 394 * Set the device to be OMAP3517 here. Actual device 395 * is identified later based on the features. 396 */ 397 switch (rev) { 398 case 0: 399 omap_revision = AM35XX_REV_ES1_0; 400 cpu_rev = "1.0"; 401 break; 402 case 1: 403 /* FALLTHROUGH */ 404 default: 405 omap_revision = AM35XX_REV_ES1_1; 406 cpu_rev = "1.1"; 407 } 408 break; 409 case 0xb891: 410 /* Handle 36xx devices */ 411 412 switch(rev) { 413 case 0: /* Take care of early samples */ 414 omap_revision = OMAP3630_REV_ES1_0; 415 cpu_rev = "1.0"; 416 break; 417 case 1: 418 omap_revision = OMAP3630_REV_ES1_1; 419 cpu_rev = "1.1"; 420 break; 421 case 2: 422 /* FALLTHROUGH */ 423 default: 424 omap_revision = OMAP3630_REV_ES1_2; 425 cpu_rev = "1.2"; 426 } 427 break; 428 case 0xb81e: 429 switch (rev) { 430 case 0: 431 omap_revision = TI8168_REV_ES1_0; 432 cpu_rev = "1.0"; 433 break; 434 case 1: 435 omap_revision = TI8168_REV_ES1_1; 436 cpu_rev = "1.1"; 437 break; 438 case 2: 439 omap_revision = TI8168_REV_ES2_0; 440 cpu_rev = "2.0"; 441 break; 442 case 3: 443 /* FALLTHROUGH */ 444 default: 445 omap_revision = TI8168_REV_ES2_1; 446 cpu_rev = "2.1"; 447 } 448 break; 449 case 0xb944: 450 switch (rev) { 451 case 0: 452 omap_revision = AM335X_REV_ES1_0; 453 cpu_rev = "1.0"; 454 break; 455 case 1: 456 omap_revision = AM335X_REV_ES2_0; 457 cpu_rev = "2.0"; 458 break; 459 case 2: 460 /* FALLTHROUGH */ 461 default: 462 omap_revision = AM335X_REV_ES2_1; 463 cpu_rev = "2.1"; 464 break; 465 } 466 break; 467 case 0xb98c: 468 switch (rev) { 469 case 0: 470 omap_revision = AM437X_REV_ES1_0; 471 cpu_rev = "1.0"; 472 break; 473 case 1: 474 /* FALLTHROUGH */ 475 default: 476 omap_revision = AM437X_REV_ES1_1; 477 cpu_rev = "1.1"; 478 break; 479 } 480 break; 481 case 0xb8f2: 482 switch (rev) { 483 case 0: 484 /* FALLTHROUGH */ 485 case 1: 486 omap_revision = TI8148_REV_ES1_0; 487 cpu_rev = "1.0"; 488 break; 489 case 2: 490 omap_revision = TI8148_REV_ES2_0; 491 cpu_rev = "2.0"; 492 break; 493 case 3: 494 /* FALLTHROUGH */ 495 default: 496 omap_revision = TI8148_REV_ES2_1; 497 cpu_rev = "2.1"; 498 break; 499 } 500 break; 501 default: 502 /* Unknown default to latest silicon rev as default */ 503 omap_revision = OMAP3630_REV_ES1_2; 504 cpu_rev = "1.2"; 505 pr_warn("Warning: unknown chip type; assuming OMAP3630ES1.2\n"); 506 } 507 sprintf(soc_rev, "ES%s", cpu_rev); 508 } 509 510 void __init omap4xxx_check_revision(void) 511 { 512 u32 idcode; 513 u16 hawkeye; 514 u8 rev; 515 516 /* 517 * The IC rev detection is done with hawkeye and rev. 518 * Note that rev does not map directly to defined processor 519 * revision numbers as ES1.0 uses value 0. 520 */ 521 idcode = read_tap_reg(OMAP_TAP_IDCODE); 522 hawkeye = (idcode >> 12) & 0xffff; 523 rev = (idcode >> 28) & 0xf; 524 525 /* 526 * Few initial 4430 ES2.0 samples IDCODE is same as ES1.0 527 * Use ARM register to detect the correct ES version 528 */ 529 if (!rev && (hawkeye != 0xb94e) && (hawkeye != 0xb975)) { 530 idcode = read_cpuid_id(); 531 rev = (idcode & 0xf) - 1; 532 } 533 534 switch (hawkeye) { 535 case 0xb852: 536 switch (rev) { 537 case 0: 538 omap_revision = OMAP4430_REV_ES1_0; 539 break; 540 case 1: 541 default: 542 omap_revision = OMAP4430_REV_ES2_0; 543 } 544 break; 545 case 0xb95c: 546 switch (rev) { 547 case 3: 548 omap_revision = OMAP4430_REV_ES2_1; 549 break; 550 case 4: 551 omap_revision = OMAP4430_REV_ES2_2; 552 break; 553 case 6: 554 default: 555 omap_revision = OMAP4430_REV_ES2_3; 556 } 557 break; 558 case 0xb94e: 559 switch (rev) { 560 case 0: 561 omap_revision = OMAP4460_REV_ES1_0; 562 break; 563 case 2: 564 default: 565 omap_revision = OMAP4460_REV_ES1_1; 566 break; 567 } 568 break; 569 case 0xb975: 570 switch (rev) { 571 case 0: 572 default: 573 omap_revision = OMAP4470_REV_ES1_0; 574 break; 575 } 576 break; 577 default: 578 /* Unknown default to latest silicon rev as default */ 579 omap_revision = OMAP4430_REV_ES2_3; 580 } 581 582 sprintf(soc_name, "OMAP%04x", omap_rev() >> 16); 583 sprintf(soc_rev, "ES%d.%d", (omap_rev() >> 12) & 0xf, 584 (omap_rev() >> 8) & 0xf); 585 pr_info("%s %s\n", soc_name, soc_rev); 586 } 587 588 void __init omap5xxx_check_revision(void) 589 { 590 u32 idcode; 591 u16 hawkeye; 592 u8 rev; 593 594 idcode = read_tap_reg(OMAP_TAP_IDCODE); 595 hawkeye = (idcode >> 12) & 0xffff; 596 rev = (idcode >> 28) & 0xff; 597 switch (hawkeye) { 598 case 0xb942: 599 switch (rev) { 600 case 0: 601 /* No support for ES1.0 Test chip */ 602 BUG(); 603 case 1: 604 default: 605 omap_revision = OMAP5430_REV_ES2_0; 606 } 607 break; 608 609 case 0xb998: 610 switch (rev) { 611 case 0: 612 /* No support for ES1.0 Test chip */ 613 BUG(); 614 case 1: 615 default: 616 omap_revision = OMAP5432_REV_ES2_0; 617 } 618 break; 619 620 default: 621 /* Unknown default to latest silicon rev as default*/ 622 omap_revision = OMAP5430_REV_ES2_0; 623 } 624 625 sprintf(soc_name, "OMAP%04x", omap_rev() >> 16); 626 sprintf(soc_rev, "ES%d.0", (omap_rev() >> 12) & 0xf); 627 628 pr_info("%s %s\n", soc_name, soc_rev); 629 } 630 631 void __init dra7xxx_check_revision(void) 632 { 633 u32 idcode; 634 u16 hawkeye; 635 u8 rev; 636 637 idcode = read_tap_reg(OMAP_TAP_IDCODE); 638 hawkeye = (idcode >> 12) & 0xffff; 639 rev = (idcode >> 28) & 0xff; 640 switch (hawkeye) { 641 case 0xb990: 642 switch (rev) { 643 case 0: 644 omap_revision = DRA752_REV_ES1_0; 645 break; 646 case 1: 647 default: 648 omap_revision = DRA752_REV_ES1_1; 649 } 650 break; 651 652 case 0xb9bc: 653 switch (rev) { 654 case 0: 655 omap_revision = DRA722_REV_ES1_0; 656 break; 657 default: 658 /* If we have no new revisions */ 659 omap_revision = DRA722_REV_ES1_0; 660 break; 661 } 662 break; 663 664 default: 665 /* Unknown default to latest silicon rev as default*/ 666 pr_warn("%s: unknown idcode=0x%08x (hawkeye=0x%08x,rev=0x%d)\n", 667 __func__, idcode, hawkeye, rev); 668 omap_revision = DRA752_REV_ES1_1; 669 } 670 671 sprintf(soc_name, "DRA%03x", omap_rev() >> 16); 672 sprintf(soc_rev, "ES%d.%d", (omap_rev() >> 12) & 0xf, 673 (omap_rev() >> 8) & 0xf); 674 675 pr_info("%s %s\n", soc_name, soc_rev); 676 } 677 678 /* 679 * Set up things for map_io and processor detection later on. Gets called 680 * pretty much first thing from board init. For multi-omap, this gets 681 * cpu_is_omapxxxx() working accurately enough for map_io. Then we'll try to 682 * detect the exact revision later on in omap2_detect_revision() once map_io 683 * is done. 684 */ 685 void __init omap2_set_globals_tap(u32 class, void __iomem *tap) 686 { 687 omap_revision = class; 688 tap_base = tap; 689 690 /* XXX What is this intended to do? */ 691 if (cpu_is_omap34xx()) 692 tap_prod_id = 0x0210; 693 else 694 tap_prod_id = 0x0208; 695 } 696 697 #ifdef CONFIG_SOC_BUS 698 699 static const char * const omap_types[] = { 700 [OMAP2_DEVICE_TYPE_TEST] = "TST", 701 [OMAP2_DEVICE_TYPE_EMU] = "EMU", 702 [OMAP2_DEVICE_TYPE_SEC] = "HS", 703 [OMAP2_DEVICE_TYPE_GP] = "GP", 704 [OMAP2_DEVICE_TYPE_BAD] = "BAD", 705 }; 706 707 static const char * __init omap_get_family(void) 708 { 709 if (cpu_is_omap24xx()) 710 return kasprintf(GFP_KERNEL, "OMAP2"); 711 else if (cpu_is_omap34xx()) 712 return kasprintf(GFP_KERNEL, "OMAP3"); 713 else if (cpu_is_omap44xx()) 714 return kasprintf(GFP_KERNEL, "OMAP4"); 715 else if (soc_is_omap54xx()) 716 return kasprintf(GFP_KERNEL, "OMAP5"); 717 else if (soc_is_am43xx()) 718 return kasprintf(GFP_KERNEL, "AM43xx"); 719 else if (soc_is_dra7xx()) 720 return kasprintf(GFP_KERNEL, "DRA7"); 721 else 722 return kasprintf(GFP_KERNEL, "Unknown"); 723 } 724 725 static ssize_t omap_get_type(struct device *dev, 726 struct device_attribute *attr, 727 char *buf) 728 { 729 return sprintf(buf, "%s\n", omap_types[omap_type()]); 730 } 731 732 static struct device_attribute omap_soc_attr = 733 __ATTR(type, S_IRUGO, omap_get_type, NULL); 734 735 void __init omap_soc_device_init(void) 736 { 737 struct device *parent; 738 struct soc_device *soc_dev; 739 struct soc_device_attribute *soc_dev_attr; 740 741 soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL); 742 if (!soc_dev_attr) 743 return; 744 745 soc_dev_attr->machine = soc_name; 746 soc_dev_attr->family = omap_get_family(); 747 soc_dev_attr->revision = soc_rev; 748 749 soc_dev = soc_device_register(soc_dev_attr); 750 if (IS_ERR(soc_dev)) { 751 kfree(soc_dev_attr); 752 return; 753 } 754 755 parent = soc_device_to_device(soc_dev); 756 device_create_file(parent, &omap_soc_attr); 757 } 758 #endif /* CONFIG_SOC_BUS */ 759