1 /* 2 * Helper module for board specific I2C bus registration 3 * 4 * Copyright (C) 2009 Nokia Corporation. 5 * 6 * This program is free software; you can redistribute it and/or 7 * modify it under the terms of the GNU General Public License 8 * version 2 as published by the Free Software Foundation. 9 * 10 * This program is distributed in the hope that it will be useful, but 11 * WITHOUT ANY WARRANTY; without even the implied warranty of 12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 13 * General Public License for more details. 14 * 15 * You should have received a copy of the GNU General Public License 16 * along with this program; if not, write to the Free Software 17 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 18 * 02110-1301 USA 19 * 20 */ 21 22 #include "soc.h" 23 #include "omap_hwmod.h" 24 #include "omap_device.h" 25 #include "omap-pm.h" 26 27 #include "prm.h" 28 #include "common.h" 29 #include "mux.h" 30 #include "i2c.h" 31 32 /* In register I2C_CON, Bit 15 is the I2C enable bit */ 33 #define I2C_EN BIT(15) 34 #define OMAP2_I2C_CON_OFFSET 0x24 35 #define OMAP4_I2C_CON_OFFSET 0xA4 36 37 #define MAX_OMAP_I2C_HWMOD_NAME_LEN 16 38 39 static void __init omap2_i2c_mux_pins(int bus_id) 40 { 41 char mux_name[sizeof("i2c2_scl.i2c2_scl")]; 42 43 /* First I2C bus is not muxable */ 44 if (bus_id == 1) 45 return; 46 47 sprintf(mux_name, "i2c%i_scl.i2c%i_scl", bus_id, bus_id); 48 omap_mux_init_signal(mux_name, OMAP_PIN_INPUT); 49 sprintf(mux_name, "i2c%i_sda.i2c%i_sda", bus_id, bus_id); 50 omap_mux_init_signal(mux_name, OMAP_PIN_INPUT); 51 } 52 53 /** 54 * omap_i2c_reset - reset the omap i2c module. 55 * @oh: struct omap_hwmod * 56 * 57 * The i2c moudle in omap2, omap3 had a special sequence to reset. The 58 * sequence is: 59 * - Disable the I2C. 60 * - Write to SOFTRESET bit. 61 * - Enable the I2C. 62 * - Poll on the RESETDONE bit. 63 * The sequence is implemented in below function. This is called for 2420, 64 * 2430 and omap3. 65 */ 66 int omap_i2c_reset(struct omap_hwmod *oh) 67 { 68 u32 v; 69 u16 i2c_con; 70 int c = 0; 71 72 if (oh->class->rev == OMAP_I2C_IP_VERSION_2) { 73 i2c_con = OMAP4_I2C_CON_OFFSET; 74 } else if (oh->class->rev == OMAP_I2C_IP_VERSION_1) { 75 i2c_con = OMAP2_I2C_CON_OFFSET; 76 } else { 77 WARN(1, "Cannot reset I2C block %s: unsupported revision\n", 78 oh->name); 79 return -EINVAL; 80 } 81 82 /* Disable I2C */ 83 v = omap_hwmod_read(oh, i2c_con); 84 v &= ~I2C_EN; 85 omap_hwmod_write(v, oh, i2c_con); 86 87 /* Write to the SOFTRESET bit */ 88 omap_hwmod_softreset(oh); 89 90 /* Enable I2C */ 91 v = omap_hwmod_read(oh, i2c_con); 92 v |= I2C_EN; 93 omap_hwmod_write(v, oh, i2c_con); 94 95 /* Poll on RESETDONE bit */ 96 omap_test_timeout((omap_hwmod_read(oh, 97 oh->class->sysc->syss_offs) 98 & SYSS_RESETDONE_MASK), 99 MAX_MODULE_SOFTRESET_WAIT, c); 100 101 if (c == MAX_MODULE_SOFTRESET_WAIT) 102 pr_warning("%s: %s: softreset failed (waited %d usec)\n", 103 __func__, oh->name, MAX_MODULE_SOFTRESET_WAIT); 104 else 105 pr_debug("%s: %s: softreset in %d usec\n", __func__, 106 oh->name, c); 107 108 return 0; 109 } 110 111 static int __init omap_i2c_nr_ports(void) 112 { 113 int ports = 0; 114 115 if (cpu_is_omap24xx()) 116 ports = 2; 117 else if (cpu_is_omap34xx()) 118 ports = 3; 119 else if (cpu_is_omap44xx()) 120 ports = 4; 121 return ports; 122 } 123 124 /* 125 * XXX This function is a temporary compatibility wrapper - only 126 * needed until the I2C driver can be converted to call 127 * omap_pm_set_max_dev_wakeup_lat() and handle a return code. 128 */ 129 static void omap_pm_set_max_mpu_wakeup_lat_compat(struct device *dev, long t) 130 { 131 omap_pm_set_max_mpu_wakeup_lat(dev, t); 132 } 133 134 static const char name[] = "omap_i2c"; 135 136 int __init omap_i2c_add_bus(struct omap_i2c_bus_platform_data *i2c_pdata, 137 int bus_id) 138 { 139 int l; 140 struct omap_hwmod *oh; 141 struct platform_device *pdev; 142 char oh_name[MAX_OMAP_I2C_HWMOD_NAME_LEN]; 143 struct omap_i2c_bus_platform_data *pdata; 144 struct omap_i2c_dev_attr *dev_attr; 145 146 if (bus_id > omap_i2c_nr_ports()) 147 return -EINVAL; 148 149 omap2_i2c_mux_pins(bus_id); 150 151 l = snprintf(oh_name, MAX_OMAP_I2C_HWMOD_NAME_LEN, "i2c%d", bus_id); 152 WARN(l >= MAX_OMAP_I2C_HWMOD_NAME_LEN, 153 "String buffer overflow in I2C%d device setup\n", bus_id); 154 oh = omap_hwmod_lookup(oh_name); 155 if (!oh) { 156 pr_err("Could not look up %s\n", oh_name); 157 return -EEXIST; 158 } 159 160 pdata = i2c_pdata; 161 /* 162 * pass the hwmod class's CPU-specific knowledge of I2C IP revision in 163 * use, and functionality implementation flags, up to the OMAP I2C 164 * driver via platform data 165 */ 166 pdata->rev = oh->class->rev; 167 168 dev_attr = (struct omap_i2c_dev_attr *)oh->dev_attr; 169 pdata->flags = dev_attr->flags; 170 171 /* 172 * When waiting for completion of a i2c transfer, we need to 173 * set a wake up latency constraint for the MPU. This is to 174 * ensure quick enough wakeup from idle, when transfer 175 * completes. 176 * Only omap3 has support for constraints 177 */ 178 if (cpu_is_omap34xx()) 179 pdata->set_mpu_wkup_lat = omap_pm_set_max_mpu_wakeup_lat_compat; 180 pdev = omap_device_build(name, bus_id, oh, pdata, 181 sizeof(struct omap_i2c_bus_platform_data)); 182 WARN(IS_ERR(pdev), "Could not build omap_device for %s\n", name); 183 184 return PTR_RET(pdev); 185 } 186 187 static int __init omap_i2c_cmdline(void) 188 { 189 return omap_register_i2c_bus_cmdline(); 190 } 191 omap_subsys_initcall(omap_i2c_cmdline); 192