1 /* 2 * OMAP2/3 System Control Module register access 3 * 4 * Copyright (C) 2007, 2012 Texas Instruments, Inc. 5 * Copyright (C) 2007 Nokia Corporation 6 * 7 * Written by Paul Walmsley 8 * 9 * This program is free software; you can redistribute it and/or modify 10 * it under the terms of the GNU General Public License version 2 as 11 * published by the Free Software Foundation. 12 */ 13 #undef DEBUG 14 15 #include <linux/kernel.h> 16 #include <linux/io.h> 17 #include <linux/of_address.h> 18 #include <linux/regmap.h> 19 #include <linux/mfd/syscon.h> 20 21 #include "soc.h" 22 #include "iomap.h" 23 #include "common.h" 24 #include "cm-regbits-34xx.h" 25 #include "prm-regbits-34xx.h" 26 #include "prm3xxx.h" 27 #include "cm3xxx.h" 28 #include "sdrc.h" 29 #include "pm.h" 30 #include "control.h" 31 #include "clock.h" 32 33 /* Used by omap3_ctrl_save_padconf() */ 34 #define START_PADCONF_SAVE 0x2 35 #define PADCONF_SAVE_DONE 0x1 36 37 static void __iomem *omap2_ctrl_base; 38 static s16 omap2_ctrl_offset; 39 40 #if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM) 41 struct omap3_scratchpad { 42 u32 boot_config_ptr; 43 u32 public_restore_ptr; 44 u32 secure_ram_restore_ptr; 45 u32 sdrc_module_semaphore; 46 u32 prcm_block_offset; 47 u32 sdrc_block_offset; 48 }; 49 50 struct omap3_scratchpad_prcm_block { 51 u32 prm_contents[2]; 52 u32 cm_contents[11]; 53 u32 prcm_block_size; 54 }; 55 56 struct omap3_scratchpad_sdrc_block { 57 u16 sysconfig; 58 u16 cs_cfg; 59 u16 sharing; 60 u16 err_type; 61 u32 dll_a_ctrl; 62 u32 dll_b_ctrl; 63 u32 power; 64 u32 cs_0; 65 u32 mcfg_0; 66 u16 mr_0; 67 u16 emr_1_0; 68 u16 emr_2_0; 69 u16 emr_3_0; 70 u32 actim_ctrla_0; 71 u32 actim_ctrlb_0; 72 u32 rfr_ctrl_0; 73 u32 cs_1; 74 u32 mcfg_1; 75 u16 mr_1; 76 u16 emr_1_1; 77 u16 emr_2_1; 78 u16 emr_3_1; 79 u32 actim_ctrla_1; 80 u32 actim_ctrlb_1; 81 u32 rfr_ctrl_1; 82 u16 dcdl_1_ctrl; 83 u16 dcdl_2_ctrl; 84 u32 flags; 85 u32 block_size; 86 }; 87 88 void *omap3_secure_ram_storage; 89 90 /* 91 * This is used to store ARM registers in SDRAM before attempting 92 * an MPU OFF. The save and restore happens from the SRAM sleep code. 93 * The address is stored in scratchpad, so that it can be used 94 * during the restore path. 95 */ 96 u32 omap3_arm_context[128]; 97 98 struct omap3_control_regs { 99 u32 sysconfig; 100 u32 devconf0; 101 u32 mem_dftrw0; 102 u32 mem_dftrw1; 103 u32 msuspendmux_0; 104 u32 msuspendmux_1; 105 u32 msuspendmux_2; 106 u32 msuspendmux_3; 107 u32 msuspendmux_4; 108 u32 msuspendmux_5; 109 u32 sec_ctrl; 110 u32 devconf1; 111 u32 csirxfe; 112 u32 iva2_bootaddr; 113 u32 iva2_bootmod; 114 u32 wkup_ctrl; 115 u32 debobs_0; 116 u32 debobs_1; 117 u32 debobs_2; 118 u32 debobs_3; 119 u32 debobs_4; 120 u32 debobs_5; 121 u32 debobs_6; 122 u32 debobs_7; 123 u32 debobs_8; 124 u32 prog_io0; 125 u32 prog_io1; 126 u32 dss_dpll_spreading; 127 u32 core_dpll_spreading; 128 u32 per_dpll_spreading; 129 u32 usbhost_dpll_spreading; 130 u32 pbias_lite; 131 u32 temp_sensor; 132 u32 sramldo4; 133 u32 sramldo5; 134 u32 csi; 135 u32 padconf_sys_nirq; 136 }; 137 138 static struct omap3_control_regs control_context; 139 #endif /* CONFIG_ARCH_OMAP3 && CONFIG_PM */ 140 141 void __init omap2_set_globals_control(void __iomem *ctrl) 142 { 143 omap2_ctrl_base = ctrl; 144 } 145 146 u8 omap_ctrl_readb(u16 offset) 147 { 148 u32 val; 149 u8 byte_offset = offset & 0x3; 150 151 val = omap_ctrl_readl(offset); 152 153 return (val >> (byte_offset * 8)) & 0xff; 154 } 155 156 u16 omap_ctrl_readw(u16 offset) 157 { 158 u32 val; 159 u16 byte_offset = offset & 0x2; 160 161 val = omap_ctrl_readl(offset); 162 163 return (val >> (byte_offset * 8)) & 0xffff; 164 } 165 166 u32 omap_ctrl_readl(u16 offset) 167 { 168 offset &= 0xfffc; 169 170 return readl_relaxed(omap2_ctrl_base + offset); 171 } 172 173 void omap_ctrl_writeb(u8 val, u16 offset) 174 { 175 u32 tmp; 176 u8 byte_offset = offset & 0x3; 177 178 tmp = omap_ctrl_readl(offset); 179 180 tmp &= 0xffffffff ^ (0xff << (byte_offset * 8)); 181 tmp |= val << (byte_offset * 8); 182 183 omap_ctrl_writel(tmp, offset); 184 } 185 186 void omap_ctrl_writew(u16 val, u16 offset) 187 { 188 u32 tmp; 189 u8 byte_offset = offset & 0x2; 190 191 tmp = omap_ctrl_readl(offset); 192 193 tmp &= 0xffffffff ^ (0xffff << (byte_offset * 8)); 194 tmp |= val << (byte_offset * 8); 195 196 omap_ctrl_writel(tmp, offset); 197 } 198 199 void omap_ctrl_writel(u32 val, u16 offset) 200 { 201 offset &= 0xfffc; 202 writel_relaxed(val, omap2_ctrl_base + offset); 203 } 204 205 #ifdef CONFIG_ARCH_OMAP3 206 207 /** 208 * omap3_ctrl_write_boot_mode - set scratchpad boot mode for the next boot 209 * @bootmode: 8-bit value to pass to some boot code 210 * 211 * Set the bootmode in the scratchpad RAM. This is used after the 212 * system restarts. Not sure what actually uses this - it may be the 213 * bootloader, rather than the boot ROM - contrary to the preserved 214 * comment below. No return value. 215 */ 216 void omap3_ctrl_write_boot_mode(u8 bootmode) 217 { 218 u32 l; 219 220 l = ('B' << 24) | ('M' << 16) | bootmode; 221 222 /* 223 * Reserve the first word in scratchpad for communicating 224 * with the boot ROM. A pointer to a data structure 225 * describing the boot process can be stored there, 226 * cf. OMAP34xx TRM, Initialization / Software Booting 227 * Configuration. 228 * 229 * XXX This should use some omap_ctrl_writel()-type function 230 */ 231 writel_relaxed(l, OMAP2_L4_IO_ADDRESS(OMAP343X_SCRATCHPAD + 4)); 232 } 233 234 #endif 235 236 /** 237 * omap_ctrl_write_dsp_boot_addr - set boot address for a remote processor 238 * @bootaddr: physical address of the boot loader 239 * 240 * Set boot address for the boot loader of a supported processor 241 * when a power ON sequence occurs. 242 */ 243 void omap_ctrl_write_dsp_boot_addr(u32 bootaddr) 244 { 245 u32 offset = cpu_is_omap243x() ? OMAP243X_CONTROL_IVA2_BOOTADDR : 246 cpu_is_omap34xx() ? OMAP343X_CONTROL_IVA2_BOOTADDR : 247 cpu_is_omap44xx() ? OMAP4_CTRL_MODULE_CORE_DSP_BOOTADDR : 248 soc_is_omap54xx() ? OMAP4_CTRL_MODULE_CORE_DSP_BOOTADDR : 249 0; 250 251 if (!offset) { 252 pr_err("%s: unsupported omap type\n", __func__); 253 return; 254 } 255 256 omap_ctrl_writel(bootaddr, offset); 257 } 258 259 /** 260 * omap_ctrl_write_dsp_boot_mode - set boot mode for a remote processor 261 * @bootmode: 8-bit value to pass to some boot code 262 * 263 * Sets boot mode for the boot loader of a supported processor 264 * when a power ON sequence occurs. 265 */ 266 void omap_ctrl_write_dsp_boot_mode(u8 bootmode) 267 { 268 u32 offset = cpu_is_omap243x() ? OMAP243X_CONTROL_IVA2_BOOTMOD : 269 cpu_is_omap34xx() ? OMAP343X_CONTROL_IVA2_BOOTMOD : 270 0; 271 272 if (!offset) { 273 pr_err("%s: unsupported omap type\n", __func__); 274 return; 275 } 276 277 omap_ctrl_writel(bootmode, offset); 278 } 279 280 #if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM) 281 /* 282 * Clears the scratchpad contents in case of cold boot- 283 * called during bootup 284 */ 285 void omap3_clear_scratchpad_contents(void) 286 { 287 u32 max_offset = OMAP343X_SCRATCHPAD_ROM_OFFSET; 288 void __iomem *v_addr; 289 u32 offset = 0; 290 291 v_addr = OMAP2_L4_IO_ADDRESS(OMAP343X_SCRATCHPAD_ROM); 292 if (omap3xxx_prm_clear_global_cold_reset()) { 293 for ( ; offset <= max_offset; offset += 0x4) 294 writel_relaxed(0x0, (v_addr + offset)); 295 } 296 } 297 298 /* Populate the scratchpad structure with restore structure */ 299 void omap3_save_scratchpad_contents(void) 300 { 301 void __iomem *scratchpad_address; 302 u32 arm_context_addr; 303 struct omap3_scratchpad scratchpad_contents; 304 struct omap3_scratchpad_prcm_block prcm_block_contents; 305 struct omap3_scratchpad_sdrc_block sdrc_block_contents; 306 307 /* 308 * Populate the Scratchpad contents 309 * 310 * The "get_*restore_pointer" functions are used to provide a 311 * physical restore address where the ROM code jumps while waking 312 * up from MPU OFF/OSWR state. 313 * The restore pointer is stored into the scratchpad. 314 */ 315 scratchpad_contents.boot_config_ptr = 0x0; 316 if (cpu_is_omap3630()) 317 scratchpad_contents.public_restore_ptr = 318 __pa_symbol(omap3_restore_3630); 319 else if (omap_rev() != OMAP3430_REV_ES3_0 && 320 omap_rev() != OMAP3430_REV_ES3_1 && 321 omap_rev() != OMAP3430_REV_ES3_1_2) 322 scratchpad_contents.public_restore_ptr = 323 __pa_symbol(omap3_restore); 324 else 325 scratchpad_contents.public_restore_ptr = 326 __pa_symbol(omap3_restore_es3); 327 328 if (omap_type() == OMAP2_DEVICE_TYPE_GP) 329 scratchpad_contents.secure_ram_restore_ptr = 0x0; 330 else 331 scratchpad_contents.secure_ram_restore_ptr = 332 (u32) __pa(omap3_secure_ram_storage); 333 scratchpad_contents.sdrc_module_semaphore = 0x0; 334 scratchpad_contents.prcm_block_offset = 0x2C; 335 scratchpad_contents.sdrc_block_offset = 0x64; 336 337 /* Populate the PRCM block contents */ 338 omap3_prm_save_scratchpad_contents(prcm_block_contents.prm_contents); 339 omap3_cm_save_scratchpad_contents(prcm_block_contents.cm_contents); 340 341 prcm_block_contents.prcm_block_size = 0x0; 342 343 /* Populate the SDRC block contents */ 344 sdrc_block_contents.sysconfig = 345 (sdrc_read_reg(SDRC_SYSCONFIG) & 0xFFFF); 346 sdrc_block_contents.cs_cfg = 347 (sdrc_read_reg(SDRC_CS_CFG) & 0xFFFF); 348 sdrc_block_contents.sharing = 349 (sdrc_read_reg(SDRC_SHARING) & 0xFFFF); 350 sdrc_block_contents.err_type = 351 (sdrc_read_reg(SDRC_ERR_TYPE) & 0xFFFF); 352 sdrc_block_contents.dll_a_ctrl = sdrc_read_reg(SDRC_DLLA_CTRL); 353 sdrc_block_contents.dll_b_ctrl = 0x0; 354 /* 355 * Due to a OMAP3 errata (1.142), on EMU/HS devices SRDC should 356 * be programed to issue automatic self refresh on timeout 357 * of AUTO_CNT = 1 prior to any transition to OFF mode. 358 */ 359 if ((omap_type() != OMAP2_DEVICE_TYPE_GP) 360 && (omap_rev() >= OMAP3430_REV_ES3_0)) 361 sdrc_block_contents.power = (sdrc_read_reg(SDRC_POWER) & 362 ~(SDRC_POWER_AUTOCOUNT_MASK| 363 SDRC_POWER_CLKCTRL_MASK)) | 364 (1 << SDRC_POWER_AUTOCOUNT_SHIFT) | 365 SDRC_SELF_REFRESH_ON_AUTOCOUNT; 366 else 367 sdrc_block_contents.power = sdrc_read_reg(SDRC_POWER); 368 369 sdrc_block_contents.cs_0 = 0x0; 370 sdrc_block_contents.mcfg_0 = sdrc_read_reg(SDRC_MCFG_0); 371 sdrc_block_contents.mr_0 = (sdrc_read_reg(SDRC_MR_0) & 0xFFFF); 372 sdrc_block_contents.emr_1_0 = 0x0; 373 sdrc_block_contents.emr_2_0 = 0x0; 374 sdrc_block_contents.emr_3_0 = 0x0; 375 sdrc_block_contents.actim_ctrla_0 = 376 sdrc_read_reg(SDRC_ACTIM_CTRL_A_0); 377 sdrc_block_contents.actim_ctrlb_0 = 378 sdrc_read_reg(SDRC_ACTIM_CTRL_B_0); 379 sdrc_block_contents.rfr_ctrl_0 = 380 sdrc_read_reg(SDRC_RFR_CTRL_0); 381 sdrc_block_contents.cs_1 = 0x0; 382 sdrc_block_contents.mcfg_1 = sdrc_read_reg(SDRC_MCFG_1); 383 sdrc_block_contents.mr_1 = sdrc_read_reg(SDRC_MR_1) & 0xFFFF; 384 sdrc_block_contents.emr_1_1 = 0x0; 385 sdrc_block_contents.emr_2_1 = 0x0; 386 sdrc_block_contents.emr_3_1 = 0x0; 387 sdrc_block_contents.actim_ctrla_1 = 388 sdrc_read_reg(SDRC_ACTIM_CTRL_A_1); 389 sdrc_block_contents.actim_ctrlb_1 = 390 sdrc_read_reg(SDRC_ACTIM_CTRL_B_1); 391 sdrc_block_contents.rfr_ctrl_1 = 392 sdrc_read_reg(SDRC_RFR_CTRL_1); 393 sdrc_block_contents.dcdl_1_ctrl = 0x0; 394 sdrc_block_contents.dcdl_2_ctrl = 0x0; 395 sdrc_block_contents.flags = 0x0; 396 sdrc_block_contents.block_size = 0x0; 397 398 arm_context_addr = __pa_symbol(omap3_arm_context); 399 400 /* Copy all the contents to the scratchpad location */ 401 scratchpad_address = OMAP2_L4_IO_ADDRESS(OMAP343X_SCRATCHPAD); 402 memcpy_toio(scratchpad_address, &scratchpad_contents, 403 sizeof(scratchpad_contents)); 404 /* Scratchpad contents being 32 bits, a divide by 4 done here */ 405 memcpy_toio(scratchpad_address + 406 scratchpad_contents.prcm_block_offset, 407 &prcm_block_contents, sizeof(prcm_block_contents)); 408 memcpy_toio(scratchpad_address + 409 scratchpad_contents.sdrc_block_offset, 410 &sdrc_block_contents, sizeof(sdrc_block_contents)); 411 /* 412 * Copies the address of the location in SDRAM where ARM 413 * registers get saved during a MPU OFF transition. 414 */ 415 memcpy_toio(scratchpad_address + 416 scratchpad_contents.sdrc_block_offset + 417 sizeof(sdrc_block_contents), &arm_context_addr, 4); 418 } 419 420 void omap3_control_save_context(void) 421 { 422 control_context.sysconfig = omap_ctrl_readl(OMAP2_CONTROL_SYSCONFIG); 423 control_context.devconf0 = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0); 424 control_context.mem_dftrw0 = 425 omap_ctrl_readl(OMAP343X_CONTROL_MEM_DFTRW0); 426 control_context.mem_dftrw1 = 427 omap_ctrl_readl(OMAP343X_CONTROL_MEM_DFTRW1); 428 control_context.msuspendmux_0 = 429 omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_0); 430 control_context.msuspendmux_1 = 431 omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_1); 432 control_context.msuspendmux_2 = 433 omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_2); 434 control_context.msuspendmux_3 = 435 omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_3); 436 control_context.msuspendmux_4 = 437 omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_4); 438 control_context.msuspendmux_5 = 439 omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_5); 440 control_context.sec_ctrl = omap_ctrl_readl(OMAP2_CONTROL_SEC_CTRL); 441 control_context.devconf1 = omap_ctrl_readl(OMAP343X_CONTROL_DEVCONF1); 442 control_context.csirxfe = omap_ctrl_readl(OMAP343X_CONTROL_CSIRXFE); 443 control_context.iva2_bootaddr = 444 omap_ctrl_readl(OMAP343X_CONTROL_IVA2_BOOTADDR); 445 control_context.iva2_bootmod = 446 omap_ctrl_readl(OMAP343X_CONTROL_IVA2_BOOTMOD); 447 control_context.wkup_ctrl = omap_ctrl_readl(OMAP34XX_CONTROL_WKUP_CTRL); 448 control_context.debobs_0 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(0)); 449 control_context.debobs_1 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(1)); 450 control_context.debobs_2 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(2)); 451 control_context.debobs_3 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(3)); 452 control_context.debobs_4 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(4)); 453 control_context.debobs_5 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(5)); 454 control_context.debobs_6 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(6)); 455 control_context.debobs_7 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(7)); 456 control_context.debobs_8 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(8)); 457 control_context.prog_io0 = omap_ctrl_readl(OMAP343X_CONTROL_PROG_IO0); 458 control_context.prog_io1 = omap_ctrl_readl(OMAP343X_CONTROL_PROG_IO1); 459 control_context.dss_dpll_spreading = 460 omap_ctrl_readl(OMAP343X_CONTROL_DSS_DPLL_SPREADING); 461 control_context.core_dpll_spreading = 462 omap_ctrl_readl(OMAP343X_CONTROL_CORE_DPLL_SPREADING); 463 control_context.per_dpll_spreading = 464 omap_ctrl_readl(OMAP343X_CONTROL_PER_DPLL_SPREADING); 465 control_context.usbhost_dpll_spreading = 466 omap_ctrl_readl(OMAP343X_CONTROL_USBHOST_DPLL_SPREADING); 467 control_context.pbias_lite = 468 omap_ctrl_readl(OMAP343X_CONTROL_PBIAS_LITE); 469 control_context.temp_sensor = 470 omap_ctrl_readl(OMAP343X_CONTROL_TEMP_SENSOR); 471 control_context.sramldo4 = omap_ctrl_readl(OMAP343X_CONTROL_SRAMLDO4); 472 control_context.sramldo5 = omap_ctrl_readl(OMAP343X_CONTROL_SRAMLDO5); 473 control_context.csi = omap_ctrl_readl(OMAP343X_CONTROL_CSI); 474 control_context.padconf_sys_nirq = 475 omap_ctrl_readl(OMAP343X_CONTROL_PADCONF_SYSNIRQ); 476 } 477 478 void omap3_control_restore_context(void) 479 { 480 omap_ctrl_writel(control_context.sysconfig, OMAP2_CONTROL_SYSCONFIG); 481 omap_ctrl_writel(control_context.devconf0, OMAP2_CONTROL_DEVCONF0); 482 omap_ctrl_writel(control_context.mem_dftrw0, 483 OMAP343X_CONTROL_MEM_DFTRW0); 484 omap_ctrl_writel(control_context.mem_dftrw1, 485 OMAP343X_CONTROL_MEM_DFTRW1); 486 omap_ctrl_writel(control_context.msuspendmux_0, 487 OMAP2_CONTROL_MSUSPENDMUX_0); 488 omap_ctrl_writel(control_context.msuspendmux_1, 489 OMAP2_CONTROL_MSUSPENDMUX_1); 490 omap_ctrl_writel(control_context.msuspendmux_2, 491 OMAP2_CONTROL_MSUSPENDMUX_2); 492 omap_ctrl_writel(control_context.msuspendmux_3, 493 OMAP2_CONTROL_MSUSPENDMUX_3); 494 omap_ctrl_writel(control_context.msuspendmux_4, 495 OMAP2_CONTROL_MSUSPENDMUX_4); 496 omap_ctrl_writel(control_context.msuspendmux_5, 497 OMAP2_CONTROL_MSUSPENDMUX_5); 498 omap_ctrl_writel(control_context.sec_ctrl, OMAP2_CONTROL_SEC_CTRL); 499 omap_ctrl_writel(control_context.devconf1, OMAP343X_CONTROL_DEVCONF1); 500 omap_ctrl_writel(control_context.csirxfe, OMAP343X_CONTROL_CSIRXFE); 501 omap_ctrl_writel(control_context.iva2_bootaddr, 502 OMAP343X_CONTROL_IVA2_BOOTADDR); 503 omap_ctrl_writel(control_context.iva2_bootmod, 504 OMAP343X_CONTROL_IVA2_BOOTMOD); 505 omap_ctrl_writel(control_context.wkup_ctrl, OMAP34XX_CONTROL_WKUP_CTRL); 506 omap_ctrl_writel(control_context.debobs_0, OMAP343X_CONTROL_DEBOBS(0)); 507 omap_ctrl_writel(control_context.debobs_1, OMAP343X_CONTROL_DEBOBS(1)); 508 omap_ctrl_writel(control_context.debobs_2, OMAP343X_CONTROL_DEBOBS(2)); 509 omap_ctrl_writel(control_context.debobs_3, OMAP343X_CONTROL_DEBOBS(3)); 510 omap_ctrl_writel(control_context.debobs_4, OMAP343X_CONTROL_DEBOBS(4)); 511 omap_ctrl_writel(control_context.debobs_5, OMAP343X_CONTROL_DEBOBS(5)); 512 omap_ctrl_writel(control_context.debobs_6, OMAP343X_CONTROL_DEBOBS(6)); 513 omap_ctrl_writel(control_context.debobs_7, OMAP343X_CONTROL_DEBOBS(7)); 514 omap_ctrl_writel(control_context.debobs_8, OMAP343X_CONTROL_DEBOBS(8)); 515 omap_ctrl_writel(control_context.prog_io0, OMAP343X_CONTROL_PROG_IO0); 516 omap_ctrl_writel(control_context.prog_io1, OMAP343X_CONTROL_PROG_IO1); 517 omap_ctrl_writel(control_context.dss_dpll_spreading, 518 OMAP343X_CONTROL_DSS_DPLL_SPREADING); 519 omap_ctrl_writel(control_context.core_dpll_spreading, 520 OMAP343X_CONTROL_CORE_DPLL_SPREADING); 521 omap_ctrl_writel(control_context.per_dpll_spreading, 522 OMAP343X_CONTROL_PER_DPLL_SPREADING); 523 omap_ctrl_writel(control_context.usbhost_dpll_spreading, 524 OMAP343X_CONTROL_USBHOST_DPLL_SPREADING); 525 omap_ctrl_writel(control_context.pbias_lite, 526 OMAP343X_CONTROL_PBIAS_LITE); 527 omap_ctrl_writel(control_context.temp_sensor, 528 OMAP343X_CONTROL_TEMP_SENSOR); 529 omap_ctrl_writel(control_context.sramldo4, OMAP343X_CONTROL_SRAMLDO4); 530 omap_ctrl_writel(control_context.sramldo5, OMAP343X_CONTROL_SRAMLDO5); 531 omap_ctrl_writel(control_context.csi, OMAP343X_CONTROL_CSI); 532 omap_ctrl_writel(control_context.padconf_sys_nirq, 533 OMAP343X_CONTROL_PADCONF_SYSNIRQ); 534 } 535 536 void omap3630_ctrl_disable_rta(void) 537 { 538 if (!cpu_is_omap3630()) 539 return; 540 omap_ctrl_writel(OMAP36XX_RTA_DISABLE, OMAP36XX_CONTROL_MEM_RTA_CTRL); 541 } 542 543 /** 544 * omap3_ctrl_save_padconf - save padconf registers to scratchpad RAM 545 * 546 * Tell the SCM to start saving the padconf registers, then wait for 547 * the process to complete. Returns 0 unconditionally, although it 548 * should also eventually be able to return -ETIMEDOUT, if the save 549 * does not complete. 550 * 551 * XXX This function is missing a timeout. What should it be? 552 */ 553 int omap3_ctrl_save_padconf(void) 554 { 555 u32 cpo; 556 557 /* Save the padconf registers */ 558 cpo = omap_ctrl_readl(OMAP343X_CONTROL_PADCONF_OFF); 559 cpo |= START_PADCONF_SAVE; 560 omap_ctrl_writel(cpo, OMAP343X_CONTROL_PADCONF_OFF); 561 562 /* wait for the save to complete */ 563 while (!(omap_ctrl_readl(OMAP343X_CONTROL_GENERAL_PURPOSE_STATUS) 564 & PADCONF_SAVE_DONE)) 565 udelay(1); 566 567 return 0; 568 } 569 570 /** 571 * omap3_ctrl_set_iva_bootmode_idle - sets the IVA2 bootmode to idle 572 * 573 * Sets the bootmode for IVA2 to idle. This is needed by the PM code to 574 * force disable IVA2 so that it does not prevent any low-power states. 575 */ 576 static void __init omap3_ctrl_set_iva_bootmode_idle(void) 577 { 578 omap_ctrl_writel(OMAP3_IVA2_BOOTMOD_IDLE, 579 OMAP343X_CONTROL_IVA2_BOOTMOD); 580 } 581 582 /** 583 * omap3_ctrl_setup_d2d_padconf - setup stacked modem pads for idle 584 * 585 * Sets up the pads controlling the stacked modem in such way that the 586 * device can enter idle. 587 */ 588 static void __init omap3_ctrl_setup_d2d_padconf(void) 589 { 590 u16 mask, padconf; 591 592 /* 593 * In a stand alone OMAP3430 where there is not a stacked 594 * modem for the D2D Idle Ack and D2D MStandby must be pulled 595 * high. S CONTROL_PADCONF_SAD2D_IDLEACK and 596 * CONTROL_PADCONF_SAD2D_MSTDBY to have a pull up. 597 */ 598 mask = (1 << 4) | (1 << 3); /* pull-up, enabled */ 599 padconf = omap_ctrl_readw(OMAP3_PADCONF_SAD2D_MSTANDBY); 600 padconf |= mask; 601 omap_ctrl_writew(padconf, OMAP3_PADCONF_SAD2D_MSTANDBY); 602 603 padconf = omap_ctrl_readw(OMAP3_PADCONF_SAD2D_IDLEACK); 604 padconf |= mask; 605 omap_ctrl_writew(padconf, OMAP3_PADCONF_SAD2D_IDLEACK); 606 } 607 608 /** 609 * omap3_ctrl_init - does static initializations for control module 610 * 611 * Initializes system control module. This sets up the sysconfig autoidle, 612 * and sets up modem and iva2 so that they can be idled properly. 613 */ 614 void __init omap3_ctrl_init(void) 615 { 616 omap_ctrl_writel(OMAP3430_AUTOIDLE_MASK, OMAP2_CONTROL_SYSCONFIG); 617 618 omap3_ctrl_set_iva_bootmode_idle(); 619 620 omap3_ctrl_setup_d2d_padconf(); 621 } 622 #endif /* CONFIG_ARCH_OMAP3 && CONFIG_PM */ 623 624 struct control_init_data { 625 int index; 626 void __iomem *mem; 627 s16 offset; 628 }; 629 630 static struct control_init_data ctrl_data = { 631 .index = TI_CLKM_CTRL, 632 }; 633 634 static const struct control_init_data omap2_ctrl_data = { 635 .index = TI_CLKM_CTRL, 636 .offset = -OMAP2_CONTROL_GENERAL, 637 }; 638 639 static const struct control_init_data ctrl_aux_data = { 640 .index = TI_CLKM_CTRL_AUX, 641 }; 642 643 static const struct of_device_id omap_scrm_dt_match_table[] = { 644 { .compatible = "ti,am3-scm", .data = &ctrl_data }, 645 { .compatible = "ti,am4-scm", .data = &ctrl_data }, 646 { .compatible = "ti,omap2-scm", .data = &omap2_ctrl_data }, 647 { .compatible = "ti,omap3-scm", .data = &omap2_ctrl_data }, 648 { .compatible = "ti,dm814-scm", .data = &ctrl_data }, 649 { .compatible = "ti,dm816-scrm", .data = &ctrl_data }, 650 { .compatible = "ti,omap4-scm-core", .data = &ctrl_data }, 651 { .compatible = "ti,omap5-scm-core", .data = &ctrl_data }, 652 { .compatible = "ti,omap5-scm-wkup-pad-conf", .data = &ctrl_aux_data }, 653 { .compatible = "ti,dra7-scm-core", .data = &ctrl_data }, 654 { } 655 }; 656 657 /** 658 * omap2_control_base_init - initialize iomappings for the control driver 659 * 660 * Detects and initializes the iomappings for the control driver, based 661 * on the DT data. Returns 0 in success, negative error value 662 * otherwise. 663 */ 664 int __init omap2_control_base_init(void) 665 { 666 struct device_node *np; 667 const struct of_device_id *match; 668 struct control_init_data *data; 669 void __iomem *mem; 670 671 for_each_matching_node_and_match(np, omap_scrm_dt_match_table, &match) { 672 data = (struct control_init_data *)match->data; 673 674 mem = of_iomap(np, 0); 675 if (!mem) 676 return -ENOMEM; 677 678 if (data->index == TI_CLKM_CTRL) { 679 omap2_ctrl_base = mem; 680 omap2_ctrl_offset = data->offset; 681 } 682 683 data->mem = mem; 684 } 685 686 return 0; 687 } 688 689 /** 690 * omap_control_init - low level init for the control driver 691 * 692 * Initializes the low level clock infrastructure for control driver. 693 * Returns 0 in success, negative error value in failure. 694 */ 695 int __init omap_control_init(void) 696 { 697 struct device_node *np, *scm_conf; 698 const struct of_device_id *match; 699 const struct omap_prcm_init_data *data; 700 int ret; 701 struct regmap *syscon; 702 703 for_each_matching_node_and_match(np, omap_scrm_dt_match_table, &match) { 704 data = match->data; 705 706 /* 707 * Check if we have scm_conf node, if yes, use this to 708 * access clock registers. 709 */ 710 scm_conf = of_get_child_by_name(np, "scm_conf"); 711 712 if (scm_conf) { 713 syscon = syscon_node_to_regmap(scm_conf); 714 715 if (IS_ERR(syscon)) 716 return PTR_ERR(syscon); 717 718 if (of_get_child_by_name(scm_conf, "clocks")) { 719 ret = omap2_clk_provider_init(scm_conf, 720 data->index, 721 syscon, NULL); 722 if (ret) 723 return ret; 724 } 725 } else { 726 /* No scm_conf found, direct access */ 727 ret = omap2_clk_provider_init(np, data->index, NULL, 728 data->mem); 729 if (ret) 730 return ret; 731 } 732 } 733 734 return 0; 735 } 736 737 /** 738 * omap3_control_legacy_iomap_init - legacy iomap init for clock providers 739 * 740 * Legacy iomap init for clock provider. Needed only by legacy boot mode, 741 * where the base addresses are not parsed from DT, but still required 742 * by the clock driver to be setup properly. 743 */ 744 void __init omap3_control_legacy_iomap_init(void) 745 { 746 omap2_clk_legacy_provider_init(TI_CLKM_SCRM, omap2_ctrl_base); 747 } 748