1 /* 2 * OMAP2/3 Clock Management (CM) register definitions 3 * 4 * Copyright (C) 2007-2009 Texas Instruments, Inc. 5 * Copyright (C) 2007-2010 Nokia Corporation 6 * Paul Walmsley 7 * 8 * This program is free software; you can redistribute it and/or modify 9 * it under the terms of the GNU General Public License version 2 as 10 * published by the Free Software Foundation. 11 * 12 * The CM hardware modules on the OMAP2/3 are quite similar to each 13 * other. The CM modules/instances on OMAP4 are quite different, so 14 * they are handled in a separate file. 15 */ 16 #ifndef __ARCH_ASM_MACH_OMAP2_CM2XXX_3XXX_H 17 #define __ARCH_ASM_MACH_OMAP2_CM2XXX_3XXX_H 18 19 #include "cm.h" 20 21 /* 22 * Module specific CM register offsets from CM_BASE + domain offset 23 * Use cm_{read,write}_mod_reg() with these registers. 24 * These register offsets generally appear in more than one PRCM submodule. 25 */ 26 27 /* Common between OMAP2 and OMAP3 */ 28 29 #define CM_FCLKEN 0x0000 30 #define CM_FCLKEN1 CM_FCLKEN 31 #define CM_CLKEN CM_FCLKEN 32 #define CM_ICLKEN 0x0010 33 #define CM_ICLKEN1 CM_ICLKEN 34 #define CM_ICLKEN2 0x0014 35 #define CM_ICLKEN3 0x0018 36 #define CM_IDLEST 0x0020 37 #define CM_IDLEST1 CM_IDLEST 38 #define CM_IDLEST2 0x0024 39 #define OMAP2430_CM_IDLEST3 0x0028 40 #define CM_AUTOIDLE 0x0030 41 #define CM_AUTOIDLE1 CM_AUTOIDLE 42 #define CM_AUTOIDLE2 0x0034 43 #define CM_AUTOIDLE3 0x0038 44 #define CM_CLKSEL 0x0040 45 #define CM_CLKSEL1 CM_CLKSEL 46 #define CM_CLKSEL2 0x0044 47 #define OMAP2_CM_CLKSTCTRL 0x0048 48 49 #ifndef __ASSEMBLER__ 50 51 #include <linux/io.h> 52 53 static inline u32 omap2_cm_read_mod_reg(s16 module, u16 idx) 54 { 55 return readl_relaxed(cm_base.va + module + idx); 56 } 57 58 static inline void omap2_cm_write_mod_reg(u32 val, s16 module, u16 idx) 59 { 60 writel_relaxed(val, cm_base.va + module + idx); 61 } 62 63 /* Read-modify-write a register in a CM module. Caller must lock */ 64 static inline u32 omap2_cm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, 65 s16 idx) 66 { 67 u32 v; 68 69 v = omap2_cm_read_mod_reg(module, idx); 70 v &= ~mask; 71 v |= bits; 72 omap2_cm_write_mod_reg(v, module, idx); 73 74 return v; 75 } 76 77 /* Read a CM register, AND it, and shift the result down to bit 0 */ 78 static inline u32 omap2_cm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask) 79 { 80 u32 v; 81 82 v = omap2_cm_read_mod_reg(domain, idx); 83 v &= mask; 84 v >>= __ffs(mask); 85 86 return v; 87 } 88 89 static inline u32 omap2_cm_set_mod_reg_bits(u32 bits, s16 module, s16 idx) 90 { 91 return omap2_cm_rmw_mod_reg_bits(bits, bits, module, idx); 92 } 93 94 static inline u32 omap2_cm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx) 95 { 96 return omap2_cm_rmw_mod_reg_bits(bits, 0x0, module, idx); 97 } 98 99 extern int omap2xxx_cm_apll54_enable(void); 100 extern void omap2xxx_cm_apll54_disable(void); 101 extern int omap2xxx_cm_apll96_enable(void); 102 extern void omap2xxx_cm_apll96_disable(void); 103 104 #endif 105 106 /* CM register bits shared between 24XX and 3430 */ 107 108 /* CM_CLKSEL_GFX */ 109 #define OMAP_CLKSEL_GFX_SHIFT 0 110 #define OMAP_CLKSEL_GFX_MASK (0x7 << 0) 111 #define OMAP_CLKSEL_GFX_WIDTH 3 112 113 /* CM_ICLKEN_GFX */ 114 #define OMAP_EN_GFX_SHIFT 0 115 #define OMAP_EN_GFX_MASK (1 << 0) 116 117 /* CM_IDLEST_GFX */ 118 #define OMAP_ST_GFX_MASK (1 << 0) 119 120 #endif 121