xref: /openbmc/linux/arch/arm/mach-omap2/cm2xxx.c (revision 293d5b43)
1 /*
2  * OMAP2xxx CM module functions
3  *
4  * Copyright (C) 2009 Nokia Corporation
5  * Copyright (C) 2008-2010, 2012 Texas Instruments, Inc.
6  * Paul Walmsley
7  * Rajendra Nayak <rnayak@ti.com>
8  *
9  * This program is free software; you can redistribute it and/or modify
10  * it under the terms of the GNU General Public License version 2 as
11  * published by the Free Software Foundation.
12  */
13 
14 #include <linux/kernel.h>
15 #include <linux/types.h>
16 #include <linux/delay.h>
17 #include <linux/errno.h>
18 #include <linux/err.h>
19 #include <linux/io.h>
20 
21 #include "prm2xxx.h"
22 #include "cm.h"
23 #include "cm2xxx.h"
24 #include "cm-regbits-24xx.h"
25 #include "clockdomain.h"
26 
27 /* CM_AUTOIDLE_PLL.AUTO_* bit values for DPLLs */
28 #define DPLL_AUTOIDLE_DISABLE				0x0
29 #define OMAP2XXX_DPLL_AUTOIDLE_LOW_POWER_STOP		0x3
30 
31 /* CM_AUTOIDLE_PLL.AUTO_* bit values for APLLs (OMAP2xxx only) */
32 #define OMAP2XXX_APLL_AUTOIDLE_DISABLE			0x0
33 #define OMAP2XXX_APLL_AUTOIDLE_LOW_POWER_STOP		0x3
34 
35 /* CM_IDLEST_PLL bit value offset for APLLs (OMAP2xxx only) */
36 #define EN_APLL_LOCKED					3
37 
38 static const u8 omap2xxx_cm_idlest_offs[] = {
39 	CM_IDLEST1, CM_IDLEST2, OMAP2430_CM_IDLEST3, OMAP24XX_CM_IDLEST4
40 };
41 
42 /*
43  *
44  */
45 
46 static void _write_clktrctrl(u8 c, s16 module, u32 mask)
47 {
48 	u32 v;
49 
50 	v = omap2_cm_read_mod_reg(module, OMAP2_CM_CLKSTCTRL);
51 	v &= ~mask;
52 	v |= c << __ffs(mask);
53 	omap2_cm_write_mod_reg(v, module, OMAP2_CM_CLKSTCTRL);
54 }
55 
56 static bool omap2xxx_cm_is_clkdm_in_hwsup(s16 module, u32 mask)
57 {
58 	u32 v;
59 
60 	v = omap2_cm_read_mod_reg(module, OMAP2_CM_CLKSTCTRL);
61 	v &= mask;
62 	v >>= __ffs(mask);
63 
64 	return (v == OMAP24XX_CLKSTCTRL_ENABLE_AUTO) ? 1 : 0;
65 }
66 
67 static void omap2xxx_cm_clkdm_enable_hwsup(s16 module, u32 mask)
68 {
69 	_write_clktrctrl(OMAP24XX_CLKSTCTRL_ENABLE_AUTO, module, mask);
70 }
71 
72 static void omap2xxx_cm_clkdm_disable_hwsup(s16 module, u32 mask)
73 {
74 	_write_clktrctrl(OMAP24XX_CLKSTCTRL_DISABLE_AUTO, module, mask);
75 }
76 
77 /*
78  * DPLL autoidle control
79  */
80 
81 static void _omap2xxx_set_dpll_autoidle(u8 m)
82 {
83 	u32 v;
84 
85 	v = omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE);
86 	v &= ~OMAP24XX_AUTO_DPLL_MASK;
87 	v |= m << OMAP24XX_AUTO_DPLL_SHIFT;
88 	omap2_cm_write_mod_reg(v, PLL_MOD, CM_AUTOIDLE);
89 }
90 
91 void omap2xxx_cm_set_dpll_disable_autoidle(void)
92 {
93 	_omap2xxx_set_dpll_autoidle(OMAP2XXX_DPLL_AUTOIDLE_LOW_POWER_STOP);
94 }
95 
96 void omap2xxx_cm_set_dpll_auto_low_power_stop(void)
97 {
98 	_omap2xxx_set_dpll_autoidle(DPLL_AUTOIDLE_DISABLE);
99 }
100 
101 /*
102  * APLL control
103  */
104 
105 static void _omap2xxx_set_apll_autoidle(u8 m, u32 mask)
106 {
107 	u32 v;
108 
109 	v = omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE);
110 	v &= ~mask;
111 	v |= m << __ffs(mask);
112 	omap2_cm_write_mod_reg(v, PLL_MOD, CM_AUTOIDLE);
113 }
114 
115 void omap2xxx_cm_set_apll54_disable_autoidle(void)
116 {
117 	_omap2xxx_set_apll_autoidle(OMAP2XXX_APLL_AUTOIDLE_LOW_POWER_STOP,
118 				    OMAP24XX_AUTO_54M_MASK);
119 }
120 
121 void omap2xxx_cm_set_apll54_auto_low_power_stop(void)
122 {
123 	_omap2xxx_set_apll_autoidle(OMAP2XXX_APLL_AUTOIDLE_DISABLE,
124 				    OMAP24XX_AUTO_54M_MASK);
125 }
126 
127 void omap2xxx_cm_set_apll96_disable_autoidle(void)
128 {
129 	_omap2xxx_set_apll_autoidle(OMAP2XXX_APLL_AUTOIDLE_LOW_POWER_STOP,
130 				    OMAP24XX_AUTO_96M_MASK);
131 }
132 
133 void omap2xxx_cm_set_apll96_auto_low_power_stop(void)
134 {
135 	_omap2xxx_set_apll_autoidle(OMAP2XXX_APLL_AUTOIDLE_DISABLE,
136 				    OMAP24XX_AUTO_96M_MASK);
137 }
138 
139 /* Enable an APLL if off */
140 static int _omap2xxx_apll_enable(u8 enable_bit, u8 status_bit)
141 {
142 	u32 v, m;
143 
144 	m = EN_APLL_LOCKED << enable_bit;
145 
146 	v = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKEN);
147 	if (v & m)
148 		return 0;   /* apll already enabled */
149 
150 	v |= m;
151 	omap2_cm_write_mod_reg(v, PLL_MOD, CM_CLKEN);
152 
153 	omap2xxx_cm_wait_module_ready(0, PLL_MOD, 1, status_bit);
154 
155 	/*
156 	 * REVISIT: Should we return an error code if
157 	 * omap2xxx_cm_wait_module_ready() fails?
158 	 */
159 	return 0;
160 }
161 
162 /* Stop APLL */
163 static void _omap2xxx_apll_disable(u8 enable_bit)
164 {
165 	u32 v;
166 
167 	v = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKEN);
168 	v &= ~(EN_APLL_LOCKED << enable_bit);
169 	omap2_cm_write_mod_reg(v, PLL_MOD, CM_CLKEN);
170 }
171 
172 /* Enable an APLL if off */
173 int omap2xxx_cm_apll54_enable(void)
174 {
175 	return _omap2xxx_apll_enable(OMAP24XX_EN_54M_PLL_SHIFT,
176 				     OMAP24XX_ST_54M_APLL_SHIFT);
177 }
178 
179 /* Enable an APLL if off */
180 int omap2xxx_cm_apll96_enable(void)
181 {
182 	return _omap2xxx_apll_enable(OMAP24XX_EN_96M_PLL_SHIFT,
183 				     OMAP24XX_ST_96M_APLL_SHIFT);
184 }
185 
186 /* Stop APLL */
187 void omap2xxx_cm_apll54_disable(void)
188 {
189 	_omap2xxx_apll_disable(OMAP24XX_EN_54M_PLL_SHIFT);
190 }
191 
192 /* Stop APLL */
193 void omap2xxx_cm_apll96_disable(void)
194 {
195 	_omap2xxx_apll_disable(OMAP24XX_EN_96M_PLL_SHIFT);
196 }
197 
198 /**
199  * omap2xxx_cm_split_idlest_reg - split CM_IDLEST reg addr into its components
200  * @idlest_reg: CM_IDLEST* virtual address
201  * @prcm_inst: pointer to an s16 to return the PRCM instance offset
202  * @idlest_reg_id: pointer to a u8 to return the CM_IDLESTx register ID
203  *
204  * XXX This function is only needed until absolute register addresses are
205  * removed from the OMAP struct clk records.
206  */
207 static int omap2xxx_cm_split_idlest_reg(void __iomem *idlest_reg,
208 					s16 *prcm_inst,
209 					u8 *idlest_reg_id)
210 {
211 	unsigned long offs;
212 	u8 idlest_offs;
213 	int i;
214 
215 	if (idlest_reg < cm_base || idlest_reg > (cm_base + 0x0fff))
216 		return -EINVAL;
217 
218 	idlest_offs = (unsigned long)idlest_reg & 0xff;
219 	for (i = 0; i < ARRAY_SIZE(omap2xxx_cm_idlest_offs); i++) {
220 		if (idlest_offs == omap2xxx_cm_idlest_offs[i]) {
221 			*idlest_reg_id = i + 1;
222 			break;
223 		}
224 	}
225 
226 	if (i == ARRAY_SIZE(omap2xxx_cm_idlest_offs))
227 		return -EINVAL;
228 
229 	offs = idlest_reg - cm_base;
230 	offs &= 0xff00;
231 	*prcm_inst = offs;
232 
233 	return 0;
234 }
235 
236 /*
237  *
238  */
239 
240 /**
241  * omap2xxx_cm_wait_module_ready - wait for a module to leave idle or standby
242  * @part: PRCM partition, ignored for OMAP2
243  * @prcm_mod: PRCM module offset
244  * @idlest_id: CM_IDLESTx register ID (i.e., x = 1, 2, 3)
245  * @idlest_shift: shift of the bit in the CM_IDLEST* register to check
246  *
247  * Wait for the PRCM to indicate that the module identified by
248  * (@prcm_mod, @idlest_id, @idlest_shift) is clocked.  Return 0 upon
249  * success or -EBUSY if the module doesn't enable in time.
250  */
251 int omap2xxx_cm_wait_module_ready(u8 part, s16 prcm_mod, u16 idlest_id,
252 				  u8 idlest_shift)
253 {
254 	int ena = 0, i = 0;
255 	u8 cm_idlest_reg;
256 	u32 mask;
257 
258 	if (!idlest_id || (idlest_id > ARRAY_SIZE(omap2xxx_cm_idlest_offs)))
259 		return -EINVAL;
260 
261 	cm_idlest_reg = omap2xxx_cm_idlest_offs[idlest_id - 1];
262 
263 	mask = 1 << idlest_shift;
264 	ena = mask;
265 
266 	omap_test_timeout(((omap2_cm_read_mod_reg(prcm_mod, cm_idlest_reg) &
267 			    mask) == ena), MAX_MODULE_READY_TIME, i);
268 
269 	return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY;
270 }
271 
272 /* Clockdomain low-level functions */
273 
274 static void omap2xxx_clkdm_allow_idle(struct clockdomain *clkdm)
275 {
276 	omap2xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
277 				       clkdm->clktrctrl_mask);
278 }
279 
280 static void omap2xxx_clkdm_deny_idle(struct clockdomain *clkdm)
281 {
282 	omap2xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
283 					clkdm->clktrctrl_mask);
284 }
285 
286 static int omap2xxx_clkdm_clk_enable(struct clockdomain *clkdm)
287 {
288 	bool hwsup = false;
289 
290 	if (!clkdm->clktrctrl_mask)
291 		return 0;
292 
293 	hwsup = omap2xxx_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs,
294 					      clkdm->clktrctrl_mask);
295 	if (!hwsup && clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
296 		omap2xxx_clkdm_wakeup(clkdm);
297 
298 	return 0;
299 }
300 
301 static int omap2xxx_clkdm_clk_disable(struct clockdomain *clkdm)
302 {
303 	bool hwsup = false;
304 
305 	if (!clkdm->clktrctrl_mask)
306 		return 0;
307 
308 	hwsup = omap2xxx_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs,
309 					      clkdm->clktrctrl_mask);
310 
311 	if (!hwsup && clkdm->flags & CLKDM_CAN_FORCE_SLEEP)
312 		omap2xxx_clkdm_sleep(clkdm);
313 
314 	return 0;
315 }
316 
317 struct clkdm_ops omap2_clkdm_operations = {
318 	.clkdm_add_wkdep	= omap2_clkdm_add_wkdep,
319 	.clkdm_del_wkdep	= omap2_clkdm_del_wkdep,
320 	.clkdm_read_wkdep	= omap2_clkdm_read_wkdep,
321 	.clkdm_clear_all_wkdeps	= omap2_clkdm_clear_all_wkdeps,
322 	.clkdm_sleep		= omap2xxx_clkdm_sleep,
323 	.clkdm_wakeup		= omap2xxx_clkdm_wakeup,
324 	.clkdm_allow_idle	= omap2xxx_clkdm_allow_idle,
325 	.clkdm_deny_idle	= omap2xxx_clkdm_deny_idle,
326 	.clkdm_clk_enable	= omap2xxx_clkdm_clk_enable,
327 	.clkdm_clk_disable	= omap2xxx_clkdm_clk_disable,
328 };
329 
330 int omap2xxx_cm_fclks_active(void)
331 {
332 	u32 f1, f2;
333 
334 	f1 = omap2_cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
335 	f2 = omap2_cm_read_mod_reg(CORE_MOD, OMAP24XX_CM_FCLKEN2);
336 
337 	return (f1 | f2) ? 1 : 0;
338 }
339 
340 int omap2xxx_cm_mpu_retention_allowed(void)
341 {
342 	u32 l;
343 
344 	/* Check for MMC, UART2, UART1, McSPI2, McSPI1 and DSS1. */
345 	l = omap2_cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
346 	if (l & (OMAP2420_EN_MMC_MASK | OMAP24XX_EN_UART2_MASK |
347 		 OMAP24XX_EN_UART1_MASK | OMAP24XX_EN_MCSPI2_MASK |
348 		 OMAP24XX_EN_MCSPI1_MASK | OMAP24XX_EN_DSS1_MASK))
349 		return 0;
350 	/* Check for UART3. */
351 	l = omap2_cm_read_mod_reg(CORE_MOD, OMAP24XX_CM_FCLKEN2);
352 	if (l & OMAP24XX_EN_UART3_MASK)
353 		return 0;
354 
355 	return 1;
356 }
357 
358 u32 omap2xxx_cm_get_core_clk_src(void)
359 {
360 	u32 v;
361 
362 	v = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
363 	v &= OMAP24XX_CORE_CLK_SRC_MASK;
364 
365 	return v;
366 }
367 
368 u32 omap2xxx_cm_get_core_pll_config(void)
369 {
370 	return omap2_cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
371 }
372 
373 void omap2xxx_cm_set_mod_dividers(u32 mpu, u32 dsp, u32 gfx, u32 core, u32 mdm)
374 {
375 	u32 tmp;
376 
377 	omap2_cm_write_mod_reg(mpu, MPU_MOD, CM_CLKSEL);
378 	omap2_cm_write_mod_reg(dsp, OMAP24XX_DSP_MOD, CM_CLKSEL);
379 	omap2_cm_write_mod_reg(gfx, GFX_MOD, CM_CLKSEL);
380 	tmp = omap2_cm_read_mod_reg(CORE_MOD, CM_CLKSEL1) &
381 		OMAP24XX_CLKSEL_DSS2_MASK;
382 	omap2_cm_write_mod_reg(core | tmp, CORE_MOD, CM_CLKSEL1);
383 	if (mdm)
384 		omap2_cm_write_mod_reg(mdm, OMAP2430_MDM_MOD, CM_CLKSEL);
385 }
386 
387 /*
388  *
389  */
390 
391 static struct cm_ll_data omap2xxx_cm_ll_data = {
392 	.split_idlest_reg	= &omap2xxx_cm_split_idlest_reg,
393 	.wait_module_ready	= &omap2xxx_cm_wait_module_ready,
394 };
395 
396 int __init omap2xxx_cm_init(const struct omap_prcm_init_data *data)
397 {
398 	return cm_register(&omap2xxx_cm_ll_data);
399 }
400 
401 static void __exit omap2xxx_cm_exit(void)
402 {
403 	cm_unregister(&omap2xxx_cm_ll_data);
404 }
405 __exitcall(omap2xxx_cm_exit);
406