1 /* 2 * linux/arch/arm/mach-omap2/clock.c 3 * 4 * Copyright (C) 2005-2008 Texas Instruments, Inc. 5 * Copyright (C) 2004-2010 Nokia Corporation 6 * 7 * Contacts: 8 * Richard Woodruff <r-woodruff2@ti.com> 9 * Paul Walmsley 10 * 11 * This program is free software; you can redistribute it and/or modify 12 * it under the terms of the GNU General Public License version 2 as 13 * published by the Free Software Foundation. 14 */ 15 #undef DEBUG 16 17 #include <linux/kernel.h> 18 #include <linux/export.h> 19 #include <linux/list.h> 20 #include <linux/errno.h> 21 #include <linux/err.h> 22 #include <linux/delay.h> 23 #include <linux/clk.h> 24 #include <linux/clk-provider.h> 25 #include <linux/io.h> 26 #include <linux/bitops.h> 27 #include <linux/of_address.h> 28 #include <asm/cpu.h> 29 30 #include <trace/events/power.h> 31 32 #include "soc.h" 33 #include "clockdomain.h" 34 #include "clock.h" 35 #include "cm.h" 36 #include "cm2xxx.h" 37 #include "cm3xxx.h" 38 #include "cm-regbits-24xx.h" 39 #include "cm-regbits-34xx.h" 40 #include "common.h" 41 42 u16 cpu_mask; 43 44 /* DPLL valid Fint frequency band limits - from 34xx TRM Section 4.7.6.2 */ 45 #define OMAP3430_DPLL_FINT_BAND1_MIN 750000 46 #define OMAP3430_DPLL_FINT_BAND1_MAX 2100000 47 #define OMAP3430_DPLL_FINT_BAND2_MIN 7500000 48 #define OMAP3430_DPLL_FINT_BAND2_MAX 21000000 49 50 /* 51 * DPLL valid Fint frequency range for OMAP36xx and OMAP4xxx. 52 * From device data manual section 4.3 "DPLL and DLL Specifications". 53 */ 54 #define OMAP3PLUS_DPLL_FINT_MIN 32000 55 #define OMAP3PLUS_DPLL_FINT_MAX 52000000 56 57 static struct ti_clk_ll_ops omap_clk_ll_ops = { 58 .clkdm_clk_enable = clkdm_clk_enable, 59 .clkdm_clk_disable = clkdm_clk_disable, 60 .cm_wait_module_ready = omap_cm_wait_module_ready, 61 .cm_split_idlest_reg = cm_split_idlest_reg, 62 }; 63 64 /** 65 * omap2_clk_setup_ll_ops - setup clock driver low-level ops 66 * 67 * Sets up clock driver low-level platform ops. These are needed 68 * for register accesses and various other misc platform operations. 69 * Returns 0 on success, -EBUSY if low level ops have been registered 70 * already. 71 */ 72 int __init omap2_clk_setup_ll_ops(void) 73 { 74 return ti_clk_setup_ll_ops(&omap_clk_ll_ops); 75 } 76 77 /* 78 * OMAP2+ specific clock functions 79 */ 80 81 /* Private functions */ 82 83 /* Public functions */ 84 85 /** 86 * omap2_init_clk_clkdm - look up a clockdomain name, store pointer in clk 87 * @clk: OMAP clock struct ptr to use 88 * 89 * Convert a clockdomain name stored in a struct clk 'clk' into a 90 * clockdomain pointer, and save it into the struct clk. Intended to be 91 * called during clk_register(). No return value. 92 */ 93 void omap2_init_clk_clkdm(struct clk_hw *hw) 94 { 95 struct clk_hw_omap *clk = to_clk_hw_omap(hw); 96 struct clockdomain *clkdm; 97 const char *clk_name; 98 99 if (!clk->clkdm_name) 100 return; 101 102 clk_name = __clk_get_name(hw->clk); 103 104 clkdm = clkdm_lookup(clk->clkdm_name); 105 if (clkdm) { 106 pr_debug("clock: associated clk %s to clkdm %s\n", 107 clk_name, clk->clkdm_name); 108 clk->clkdm = clkdm; 109 } else { 110 pr_debug("clock: could not associate clk %s to clkdm %s\n", 111 clk_name, clk->clkdm_name); 112 } 113 } 114 115 static int __initdata mpurate; 116 117 /* 118 * By default we use the rate set by the bootloader. 119 * You can override this with mpurate= cmdline option. 120 */ 121 static int __init omap_clk_setup(char *str) 122 { 123 get_option(&str, &mpurate); 124 125 if (!mpurate) 126 return 1; 127 128 if (mpurate < 1000) 129 mpurate *= 1000000; 130 131 return 1; 132 } 133 __setup("mpurate=", omap_clk_setup); 134 135 /** 136 * omap2_clk_print_new_rates - print summary of current clock tree rates 137 * @hfclkin_ck_name: clk name for the off-chip HF oscillator 138 * @core_ck_name: clk name for the on-chip CORE_CLK 139 * @mpu_ck_name: clk name for the ARM MPU clock 140 * 141 * Prints a short message to the console with the HFCLKIN oscillator 142 * rate, the rate of the CORE clock, and the rate of the ARM MPU clock. 143 * Called by the boot-time MPU rate switching code. XXX This is intended 144 * to be handled by the OPP layer code in the near future and should be 145 * removed from the clock code. No return value. 146 */ 147 void __init omap2_clk_print_new_rates(const char *hfclkin_ck_name, 148 const char *core_ck_name, 149 const char *mpu_ck_name) 150 { 151 struct clk *hfclkin_ck, *core_ck, *mpu_ck; 152 unsigned long hfclkin_rate; 153 154 mpu_ck = clk_get(NULL, mpu_ck_name); 155 if (WARN(IS_ERR(mpu_ck), "clock: failed to get %s.\n", mpu_ck_name)) 156 return; 157 158 core_ck = clk_get(NULL, core_ck_name); 159 if (WARN(IS_ERR(core_ck), "clock: failed to get %s.\n", core_ck_name)) 160 return; 161 162 hfclkin_ck = clk_get(NULL, hfclkin_ck_name); 163 if (WARN(IS_ERR(hfclkin_ck), "Failed to get %s.\n", hfclkin_ck_name)) 164 return; 165 166 hfclkin_rate = clk_get_rate(hfclkin_ck); 167 168 pr_info("Switched to new clocking rate (Crystal/Core/MPU): %ld.%01ld/%ld/%ld MHz\n", 169 (hfclkin_rate / 1000000), ((hfclkin_rate / 100000) % 10), 170 (clk_get_rate(core_ck) / 1000000), 171 (clk_get_rate(mpu_ck) / 1000000)); 172 } 173 174 /** 175 * ti_clk_init_features - init clock features struct for the SoC 176 * 177 * Initializes the clock features struct based on the SoC type. 178 */ 179 void __init ti_clk_init_features(void) 180 { 181 struct ti_clk_features features = { 0 }; 182 /* Fint setup for DPLLs */ 183 if (cpu_is_omap3430()) { 184 features.fint_min = OMAP3430_DPLL_FINT_BAND1_MIN; 185 features.fint_max = OMAP3430_DPLL_FINT_BAND2_MAX; 186 features.fint_band1_max = OMAP3430_DPLL_FINT_BAND1_MAX; 187 features.fint_band2_min = OMAP3430_DPLL_FINT_BAND2_MIN; 188 } else { 189 features.fint_min = OMAP3PLUS_DPLL_FINT_MIN; 190 features.fint_max = OMAP3PLUS_DPLL_FINT_MAX; 191 } 192 193 /* Bypass value setup for DPLLs */ 194 if (cpu_is_omap24xx()) { 195 features.dpll_bypass_vals |= 196 (1 << OMAP2XXX_EN_DPLL_LPBYPASS) | 197 (1 << OMAP2XXX_EN_DPLL_FRBYPASS); 198 } else if (cpu_is_omap34xx()) { 199 features.dpll_bypass_vals |= 200 (1 << OMAP3XXX_EN_DPLL_LPBYPASS) | 201 (1 << OMAP3XXX_EN_DPLL_FRBYPASS); 202 } else if (soc_is_am33xx() || cpu_is_omap44xx() || soc_is_am43xx() || 203 soc_is_omap54xx() || soc_is_dra7xx()) { 204 features.dpll_bypass_vals |= 205 (1 << OMAP4XXX_EN_DPLL_LPBYPASS) | 206 (1 << OMAP4XXX_EN_DPLL_FRBYPASS) | 207 (1 << OMAP4XXX_EN_DPLL_MNBYPASS); 208 } 209 210 /* Jitter correction only available on OMAP343X */ 211 if (cpu_is_omap343x()) 212 features.flags |= TI_CLK_DPLL_HAS_FREQSEL; 213 214 /* Idlest value for interface clocks. 215 * 24xx uses 0 to indicate not ready, and 1 to indicate ready. 216 * 34xx reverses this, just to keep us on our toes 217 * AM35xx uses both, depending on the module. 218 */ 219 if (cpu_is_omap24xx()) 220 features.cm_idlest_val = OMAP24XX_CM_IDLEST_VAL; 221 else if (cpu_is_omap34xx()) 222 features.cm_idlest_val = OMAP34XX_CM_IDLEST_VAL; 223 224 /* On OMAP3430 ES1.0, DPLL4 can't be re-programmed */ 225 if (omap_rev() == OMAP3430_REV_ES1_0) 226 features.flags |= TI_CLK_DPLL4_DENY_REPROGRAM; 227 228 ti_clk_setup_features(&features); 229 } 230