1 /*
2  * DPLL + CORE_CLK composite clock functions
3  *
4  * Copyright (C) 2005-2008 Texas Instruments, Inc.
5  * Copyright (C) 2004-2010 Nokia Corporation
6  *
7  * Contacts:
8  * Richard Woodruff <r-woodruff2@ti.com>
9  * Paul Walmsley
10  *
11  * Based on earlier work by Tuukka Tikkanen, Tony Lindgren,
12  * Gordon McNutt and RidgeRun, Inc.
13  *
14  * This program is free software; you can redistribute it and/or modify
15  * it under the terms of the GNU General Public License version 2 as
16  * published by the Free Software Foundation.
17  *
18  * XXX The DPLL and CORE clocks should be split into two separate clock
19  * types.
20  */
21 #undef DEBUG
22 
23 #include <linux/kernel.h>
24 #include <linux/errno.h>
25 #include <linux/clk.h>
26 #include <linux/io.h>
27 
28 #include "clock.h"
29 #include "clock2xxx.h"
30 #include "opp2xxx.h"
31 #include "cm2xxx.h"
32 #include "cm-regbits-24xx.h"
33 #include "sdrc.h"
34 #include "sram.h"
35 
36 /* #define DOWN_VARIABLE_DPLL 1 */		/* Experimental */
37 
38 /*
39  * dpll_core_ck: pointer to the combined dpll_ck + core_ck on OMAP2xxx
40  * (currently defined as "dpll_ck" in the OMAP2xxx clock tree).  Set
41  * during dpll_ck init and used later by omap2xxx_clk_get_core_rate().
42  */
43 static struct clk_hw_omap *dpll_core_ck;
44 
45 /**
46  * omap2xxx_clk_get_core_rate - return the CORE_CLK rate
47  *
48  * Returns the CORE_CLK rate.  CORE_CLK can have one of three rate
49  * sources on OMAP2xxx: the DPLL CLKOUT rate, DPLL CLKOUTX2, or 32KHz
50  * (the latter is unusual).  This currently should be called with
51  * struct clk *dpll_ck, which is a composite clock of dpll_ck and
52  * core_ck.
53  */
54 unsigned long omap2xxx_clk_get_core_rate(void)
55 {
56 	long long core_clk;
57 	u32 v;
58 
59 	WARN_ON(!dpll_core_ck);
60 
61 	core_clk = omap2_get_dpll_rate(dpll_core_ck);
62 
63 	v = omap2xxx_cm_get_core_clk_src();
64 
65 	if (v == CORE_CLK_SRC_32K)
66 		core_clk = 32768;
67 	else
68 		core_clk *= v;
69 
70 	return core_clk;
71 }
72 
73 /*
74  * Uses the current prcm set to tell if a rate is valid.
75  * You can go slower, but not faster within a given rate set.
76  */
77 static long omap2_dpllcore_round_rate(unsigned long target_rate)
78 {
79 	u32 high, low, core_clk_src;
80 
81 	core_clk_src = omap2xxx_cm_get_core_clk_src();
82 
83 	if (core_clk_src == CORE_CLK_SRC_DPLL) {	/* DPLL clockout */
84 		high = curr_prcm_set->dpll_speed * 2;
85 		low = curr_prcm_set->dpll_speed;
86 	} else {				/* DPLL clockout x 2 */
87 		high = curr_prcm_set->dpll_speed;
88 		low = curr_prcm_set->dpll_speed / 2;
89 	}
90 
91 #ifdef DOWN_VARIABLE_DPLL
92 	if (target_rate > high)
93 		return high;
94 	else
95 		return target_rate;
96 #else
97 	if (target_rate > low)
98 		return high;
99 	else
100 		return low;
101 #endif
102 
103 }
104 
105 unsigned long omap2_dpllcore_recalc(struct clk_hw *hw,
106 				    unsigned long parent_rate)
107 {
108 	return omap2xxx_clk_get_core_rate();
109 }
110 
111 int omap2_reprogram_dpllcore(struct clk_hw *hw, unsigned long rate,
112 			     unsigned long parent_rate)
113 {
114 	struct clk_hw_omap *clk = to_clk_hw_omap(hw);
115 	u32 cur_rate, low, mult, div, valid_rate, done_rate;
116 	u32 bypass = 0;
117 	struct prcm_config tmpset;
118 	const struct dpll_data *dd;
119 
120 	cur_rate = omap2xxx_clk_get_core_rate();
121 	mult = omap2xxx_cm_get_core_clk_src();
122 
123 	if ((rate == (cur_rate / 2)) && (mult == 2)) {
124 		omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL, 1);
125 	} else if ((rate == (cur_rate * 2)) && (mult == 1)) {
126 		omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1);
127 	} else if (rate != cur_rate) {
128 		valid_rate = omap2_dpllcore_round_rate(rate);
129 		if (valid_rate != rate)
130 			return -EINVAL;
131 
132 		if (mult == 1)
133 			low = curr_prcm_set->dpll_speed;
134 		else
135 			low = curr_prcm_set->dpll_speed / 2;
136 
137 		dd = clk->dpll_data;
138 		if (!dd)
139 			return -EINVAL;
140 
141 		tmpset.cm_clksel1_pll = readl_relaxed(dd->mult_div1_reg);
142 		tmpset.cm_clksel1_pll &= ~(dd->mult_mask |
143 					   dd->div1_mask);
144 		div = ((curr_prcm_set->xtal_speed / 1000000) - 1);
145 		tmpset.cm_clksel2_pll = omap2xxx_cm_get_core_pll_config();
146 		tmpset.cm_clksel2_pll &= ~OMAP24XX_CORE_CLK_SRC_MASK;
147 		if (rate > low) {
148 			tmpset.cm_clksel2_pll |= CORE_CLK_SRC_DPLL_X2;
149 			mult = ((rate / 2) / 1000000);
150 			done_rate = CORE_CLK_SRC_DPLL_X2;
151 		} else {
152 			tmpset.cm_clksel2_pll |= CORE_CLK_SRC_DPLL;
153 			mult = (rate / 1000000);
154 			done_rate = CORE_CLK_SRC_DPLL;
155 		}
156 		tmpset.cm_clksel1_pll |= (div << __ffs(dd->mult_mask));
157 		tmpset.cm_clksel1_pll |= (mult << __ffs(dd->div1_mask));
158 
159 		/* Worst case */
160 		tmpset.base_sdrc_rfr = SDRC_RFR_CTRL_BYPASS;
161 
162 		if (rate == curr_prcm_set->xtal_speed)	/* If asking for 1-1 */
163 			bypass = 1;
164 
165 		/* For omap2xxx_sdrc_init_params() */
166 		omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1);
167 
168 		/* Force dll lock mode */
169 		omap2_set_prcm(tmpset.cm_clksel1_pll, tmpset.base_sdrc_rfr,
170 			       bypass);
171 
172 		/* Errata: ret dll entry state */
173 		omap2xxx_sdrc_init_params(omap2xxx_sdrc_dll_is_unlocked());
174 		omap2xxx_sdrc_reprogram(done_rate, 0);
175 	}
176 
177 	return 0;
178 }
179 
180 /**
181  * omap2xxx_clkt_dpllcore_init - clk init function for dpll_ck
182  * @clk: struct clk *dpll_ck
183  *
184  * Store a local copy of @clk in dpll_core_ck so other code can query
185  * the core rate without having to clk_get(), which can sleep.  Must
186  * only be called once.  No return value.  XXX If the clock
187  * registration process is ever changed such that dpll_ck is no longer
188  * statically defined, this code may need to change to increment some
189  * kind of use count on dpll_ck.
190  */
191 void omap2xxx_clkt_dpllcore_init(struct clk_hw *hw)
192 {
193 	WARN(dpll_core_ck, "dpll_core_ck already set - should never happen");
194 	dpll_core_ck = to_clk_hw_omap(hw);
195 }
196