1config ARCH_OMAP 2 bool 3 4config ARCH_OMAP2PLUS 5 bool "TI OMAP2/3/4/5 SoCs with device tree support" if (ARCH_MULTI_V6 || ARCH_MULTI_V7) 6 select ARCH_HAS_CPUFREQ 7 select ARCH_HAS_HOLES_MEMORYMODEL 8 select ARCH_OMAP 9 select ARCH_REQUIRE_GPIOLIB 10 select CLKDEV_LOOKUP 11 select CLKSRC_MMIO 12 select GENERIC_CLOCKEVENTS 13 select GENERIC_IRQ_CHIP 14 select HAVE_CLK 15 select OMAP_DM_TIMER 16 select PINCTRL 17 select PROC_DEVICETREE if PROC_FS 18 select SOC_BUS 19 select SPARSE_IRQ 20 select USE_OF 21 help 22 Systems based on OMAP2, OMAP3, OMAP4 or OMAP5 23 24 25if ARCH_OMAP2PLUS 26 27menu "TI OMAP2/3/4 Specific Features" 28 29config ARCH_OMAP2PLUS_TYPICAL 30 bool "Typical OMAP configuration" 31 default y 32 select AEABI 33 select HIGHMEM 34 select I2C 35 select I2C_OMAP 36 select MENELAUS if ARCH_OMAP2 37 select NEON if ARCH_OMAP3 || ARCH_OMAP4 || SOC_OMAP5 38 select PM_RUNTIME 39 select REGULATOR 40 select SERIAL_OMAP 41 select SERIAL_OMAP_CONSOLE 42 select TWL4030_CORE if ARCH_OMAP3 || ARCH_OMAP4 43 select TWL4030_POWER if ARCH_OMAP3 || ARCH_OMAP4 44 select VFP 45 help 46 Compile a kernel suitable for booting most boards 47 48config SOC_HAS_OMAP2_SDRC 49 bool "OMAP2 SDRAM Controller support" 50 51config SOC_HAS_REALTIME_COUNTER 52 bool "Real time free running counter" 53 depends on SOC_OMAP5 54 default y 55 56config ARCH_OMAP2 57 bool "TI OMAP2" 58 depends on ARCH_OMAP2PLUS 59 depends on ARCH_MULTI_V6 60 default y 61 select CPU_V6 62 select MULTI_IRQ_HANDLER 63 select SOC_HAS_OMAP2_SDRC 64 select COMMON_CLK 65 66config ARCH_OMAP3 67 bool "TI OMAP3" 68 depends on ARCH_OMAP2PLUS 69 depends on ARCH_MULTI_V7 70 default y 71 select ARCH_HAS_OPP 72 select ARM_CPU_SUSPEND if PM 73 select CPU_V7 74 select MULTI_IRQ_HANDLER 75 select OMAP_INTERCONNECT 76 select PM_OPP if PM 77 select PM_RUNTIME if CPU_IDLE 78 select SOC_HAS_OMAP2_SDRC 79 select COMMON_CLK 80 select USB_ARCH_HAS_EHCI if USB_SUPPORT 81 82config ARCH_OMAP4 83 bool "TI OMAP4" 84 default y 85 depends on ARCH_OMAP2PLUS 86 depends on ARCH_MULTI_V7 87 select ARCH_HAS_OPP 88 select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP 89 select ARM_CPU_SUSPEND if PM 90 select ARM_ERRATA_720789 91 select ARM_GIC 92 select CACHE_L2X0 93 select CPU_V7 94 select HAVE_ARM_SCU if SMP 95 select HAVE_ARM_TWD if LOCAL_TIMERS 96 select HAVE_SMP 97 select LOCAL_TIMERS if SMP 98 select OMAP_INTERCONNECT 99 select PL310_ERRATA_588369 100 select PL310_ERRATA_727915 101 select PM_OPP if PM 102 select PM_RUNTIME if CPU_IDLE 103 select USB_ARCH_HAS_EHCI if USB_SUPPORT 104 select COMMON_CLK 105 select ARM_ERRATA_754322 106 select ARM_ERRATA_775420 107 108config SOC_OMAP5 109 bool "TI OMAP5" 110 depends on ARCH_MULTI_V7 111 select ARM_CPU_SUSPEND if PM 112 select ARM_GIC 113 select CPU_V7 114 select HAVE_SMP 115 select COMMON_CLK 116 select HAVE_ARM_ARCH_TIMER 117 118comment "OMAP Core Type" 119 depends on ARCH_OMAP2 120 121config SOC_OMAP2420 122 bool "OMAP2420 support" 123 depends on ARCH_OMAP2 124 default y 125 select OMAP_DM_TIMER 126 select SOC_HAS_OMAP2_SDRC 127 128config SOC_OMAP2430 129 bool "OMAP2430 support" 130 depends on ARCH_OMAP2 131 default y 132 select SOC_HAS_OMAP2_SDRC 133 134config SOC_OMAP3430 135 bool "OMAP3430 support" 136 depends on ARCH_OMAP3 137 default y 138 select SOC_HAS_OMAP2_SDRC 139 140config SOC_TI81XX 141 bool "TI81XX support" 142 depends on ARCH_OMAP3 143 default y 144 145config SOC_AM33XX 146 bool "AM33XX support" 147 depends on ARCH_MULTI_V7 148 default y 149 select ARM_CPU_SUSPEND if PM 150 select CPU_V7 151 select MULTI_IRQ_HANDLER 152 select COMMON_CLK 153 154config OMAP_PACKAGE_ZAF 155 bool 156 157config OMAP_PACKAGE_ZAC 158 bool 159 160config OMAP_PACKAGE_CBC 161 bool 162 163config OMAP_PACKAGE_CBB 164 bool 165 166config OMAP_PACKAGE_CUS 167 bool 168 169config OMAP_PACKAGE_CBP 170 bool 171 172config OMAP_PACKAGE_CBL 173 bool 174 175config OMAP_PACKAGE_CBS 176 bool 177 178comment "OMAP Board Type" 179 depends on ARCH_OMAP2PLUS 180 181config MACH_OMAP_GENERIC 182 bool "Generic OMAP2+ board" 183 depends on ARCH_OMAP2PLUS 184 default y 185 help 186 Support for generic TI OMAP2+ boards using Flattened Device Tree. 187 More information at Documentation/devicetree 188 189config MACH_OMAP2_TUSB6010 190 bool 191 depends on ARCH_OMAP2 && SOC_OMAP2420 192 default y if MACH_NOKIA_N8X0 193 194config MACH_OMAP_H4 195 bool "OMAP 2420 H4 board" 196 depends on SOC_OMAP2420 197 default y 198 select OMAP_DEBUG_DEVICES 199 select OMAP_PACKAGE_ZAF 200 201config MACH_OMAP_2430SDP 202 bool "OMAP 2430 SDP board" 203 depends on SOC_OMAP2430 204 default y 205 select OMAP_PACKAGE_ZAC 206 207config MACH_OMAP3_BEAGLE 208 bool "OMAP3 BEAGLE board" 209 depends on ARCH_OMAP3 210 default y 211 select OMAP_PACKAGE_CBB 212 213config MACH_DEVKIT8000 214 bool "DEVKIT8000 board" 215 depends on ARCH_OMAP3 216 default y 217 select OMAP_PACKAGE_CUS 218 219config MACH_OMAP_LDP 220 bool "OMAP3 LDP board" 221 depends on ARCH_OMAP3 222 default y 223 select OMAP_PACKAGE_CBB 224 225config MACH_OMAP3530_LV_SOM 226 bool "OMAP3 Logic 3530 LV SOM board" 227 depends on ARCH_OMAP3 228 default y 229 select OMAP_PACKAGE_CBB 230 help 231 Support for the LogicPD OMAP3530 SOM Development kit 232 for full description please see the products webpage at 233 http://www.logicpd.com/products/development-kits/texas-instruments-zoom%E2%84%A2-omap35x-development-kit 234 235config MACH_OMAP3_TORPEDO 236 bool "OMAP3 Logic 35x Torpedo board" 237 depends on ARCH_OMAP3 238 default y 239 select OMAP_PACKAGE_CBB 240 help 241 Support for the LogicPD OMAP35x Torpedo Development kit 242 for full description please see the products webpage at 243 http://www.logicpd.com/products/development-kits/zoom-omap35x-torpedo-development-kit 244 245config MACH_OVERO 246 bool "Gumstix Overo board" 247 depends on ARCH_OMAP3 248 default y 249 select OMAP_PACKAGE_CBB 250 251config MACH_OMAP3EVM 252 bool "OMAP 3530 EVM board" 253 depends on ARCH_OMAP3 254 default y 255 select OMAP_PACKAGE_CBB 256 257config MACH_OMAP3517EVM 258 bool "OMAP3517/ AM3517 EVM board" 259 depends on ARCH_OMAP3 260 default y 261 select OMAP_PACKAGE_CBB 262 263config MACH_CRANEBOARD 264 bool "AM3517/05 CRANE board" 265 depends on ARCH_OMAP3 266 select OMAP_PACKAGE_CBB 267 268config MACH_OMAP3_PANDORA 269 bool "OMAP3 Pandora" 270 depends on ARCH_OMAP3 271 default y 272 select OMAP_PACKAGE_CBB 273 select REGULATOR_FIXED_VOLTAGE if REGULATOR 274 275config MACH_TOUCHBOOK 276 bool "OMAP3 Touch Book" 277 depends on ARCH_OMAP3 278 default y 279 select OMAP_PACKAGE_CBB 280 281config MACH_OMAP_3430SDP 282 bool "OMAP 3430 SDP board" 283 depends on ARCH_OMAP3 284 default y 285 select OMAP_PACKAGE_CBB 286 287config MACH_NOKIA_N800 288 bool 289 290config MACH_NOKIA_N810 291 bool 292 293config MACH_NOKIA_N810_WIMAX 294 bool 295 296config MACH_NOKIA_N8X0 297 bool "Nokia N800/N810" 298 depends on SOC_OMAP2420 299 default y 300 select MACH_NOKIA_N800 301 select MACH_NOKIA_N810 302 select MACH_NOKIA_N810_WIMAX 303 select OMAP_PACKAGE_ZAC 304 305config MACH_NOKIA_RM680 306 bool "Nokia N950 (RM-680) / N9 (RM-696) phones" 307 depends on ARCH_OMAP3 308 default y 309 select MACH_NOKIA_RM696 310 select OMAP_PACKAGE_CBB 311 312config MACH_NOKIA_RX51 313 bool "Nokia N900 (RX-51) phone" 314 depends on ARCH_OMAP3 315 default y 316 select OMAP_PACKAGE_CBB 317 318config MACH_OMAP_ZOOM2 319 bool "OMAP3 Zoom2 board" 320 depends on ARCH_OMAP3 321 default y 322 select OMAP_PACKAGE_CBB 323 select REGULATOR_FIXED_VOLTAGE if REGULATOR 324 325config MACH_OMAP_ZOOM3 326 bool "OMAP3630 Zoom3 board" 327 depends on ARCH_OMAP3 328 default y 329 select OMAP_PACKAGE_CBP 330 select REGULATOR_FIXED_VOLTAGE if REGULATOR 331 332config MACH_CM_T35 333 bool "CompuLab CM-T35/CM-T3730 modules" 334 depends on ARCH_OMAP3 335 default y 336 select MACH_CM_T3730 337 select OMAP_PACKAGE_CUS 338 339config MACH_CM_T3517 340 bool "CompuLab CM-T3517 module" 341 depends on ARCH_OMAP3 342 default y 343 select OMAP_PACKAGE_CBB 344 345config MACH_CM_T3730 346 bool 347 348config MACH_IGEP0020 349 bool "IGEP v2 board" 350 depends on ARCH_OMAP3 351 default y 352 select OMAP_PACKAGE_CBB 353 354config MACH_IGEP0030 355 bool "IGEP OMAP3 module" 356 depends on ARCH_OMAP3 357 default y 358 select MACH_IGEP0020 359 select OMAP_PACKAGE_CBB 360 361config MACH_SBC3530 362 bool "OMAP3 SBC STALKER board" 363 depends on ARCH_OMAP3 364 default y 365 select OMAP_PACKAGE_CUS 366 367config MACH_OMAP_3630SDP 368 bool "OMAP3630 SDP board" 369 depends on ARCH_OMAP3 370 default y 371 select OMAP_PACKAGE_CBP 372 373config MACH_TI8168EVM 374 bool "TI8168 Evaluation Module" 375 depends on SOC_TI81XX 376 default y 377 378config MACH_TI8148EVM 379 bool "TI8148 Evaluation Module" 380 depends on SOC_TI81XX 381 default y 382 383config MACH_OMAP_4430SDP 384 bool "OMAP 4430 SDP board" 385 default y 386 depends on ARCH_OMAP4 387 select OMAP_PACKAGE_CBL 388 select OMAP_PACKAGE_CBS 389 select REGULATOR_FIXED_VOLTAGE if REGULATOR 390 391config MACH_OMAP4_PANDA 392 bool "OMAP4 Panda Board" 393 default y 394 depends on ARCH_OMAP4 395 select OMAP_PACKAGE_CBL 396 select OMAP_PACKAGE_CBS 397 select REGULATOR_FIXED_VOLTAGE if REGULATOR 398 399config OMAP3_EMU 400 bool "OMAP3 debugging peripherals" 401 depends on ARCH_OMAP3 402 select ARM_AMBA 403 select OC_ETM 404 help 405 Say Y here to enable debugging hardware of omap3 406 407config OMAP3_SDRC_AC_TIMING 408 bool "Enable SDRC AC timing register changes" 409 depends on ARCH_OMAP3 410 default n 411 help 412 If you know that none of your system initiators will attempt to 413 access SDRAM during CORE DVFS, select Y here. This should boost 414 SDRAM performance at lower CORE OPPs. There are relatively few 415 users who will wish to say yes at this point - almost everyone will 416 wish to say no. Selecting yes without understanding what is 417 going on could result in system crashes; 418 419config OMAP4_ERRATA_I688 420 bool "OMAP4 errata: Async Bridge Corruption" 421 depends on (ARCH_OMAP4 || SOC_OMAP5) && !ARCH_MULTIPLATFORM 422 select ARCH_HAS_BARRIERS 423 help 424 If a data is stalled inside asynchronous bridge because of back 425 pressure, it may be accepted multiple times, creating pointer 426 misalignment that will corrupt next transfers on that data path 427 until next reset of the system (No recovery procedure once the 428 issue is hit, the path remains consistently broken). Async bridge 429 can be found on path between MPU to EMIF and MPU to L3 interconnect. 430 This situation can happen only when the idle is initiated by a 431 Master Request Disconnection (which is trigged by software when 432 executing WFI on CPU). 433 The work-around for this errata needs all the initiators connected 434 through async bridge must ensure that data path is properly drained 435 before issuing WFI. This condition will be met if one Strongly ordered 436 access is performed to the target right before executing the WFI. 437 In MPU case, L3 T2ASYNC FIFO and DDR T2ASYNC FIFO needs to be drained. 438 IO barrier ensure that there is no synchronisation loss on initiators 439 operating on both interconnect port simultaneously. 440endmenu 441 442endif 443