1config ARCH_OMAP 2 bool 3 4config ARCH_OMAP2 5 bool "TI OMAP2" 6 depends on ARCH_MULTI_V6 7 select ARCH_OMAP2PLUS 8 select CPU_V6 9 select MULTI_IRQ_HANDLER 10 select SOC_HAS_OMAP2_SDRC 11 12config ARCH_OMAP3 13 bool "TI OMAP3" 14 depends on ARCH_MULTI_V7 15 select ARCH_OMAP2PLUS 16 select ARCH_HAS_OPP 17 select ARM_CPU_SUSPEND if PM 18 select CPU_V7 19 select MULTI_IRQ_HANDLER 20 select OMAP_INTERCONNECT 21 select PM_OPP if PM 22 select PM_RUNTIME if CPU_IDLE 23 select SOC_HAS_OMAP2_SDRC 24 select USB_ARCH_HAS_EHCI if USB_SUPPORT 25 26config ARCH_OMAP4 27 bool "TI OMAP4" 28 depends on ARCH_MULTI_V7 29 select ARCH_OMAP2PLUS 30 select ARCH_HAS_OPP 31 select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP 32 select ARM_CPU_SUSPEND if PM 33 select ARM_ERRATA_720789 34 select ARM_GIC 35 select CACHE_L2X0 36 select CPU_V7 37 select HAVE_ARM_SCU if SMP 38 select HAVE_ARM_TWD if SMP 39 select HAVE_SMP 40 select OMAP_INTERCONNECT 41 select PL310_ERRATA_588369 42 select PL310_ERRATA_727915 43 select PM_OPP if PM 44 select PM_RUNTIME if CPU_IDLE 45 select USB_ARCH_HAS_EHCI if USB_SUPPORT 46 select ARM_ERRATA_754322 47 select ARM_ERRATA_775420 48 49config SOC_OMAP5 50 bool "TI OMAP5" 51 depends on ARCH_MULTI_V7 52 select ARCH_OMAP2PLUS 53 select ARM_CPU_SUSPEND if PM 54 select ARM_GIC 55 select CPU_V7 56 select HAVE_ARM_SCU if SMP 57 select HAVE_ARM_TWD if LOCAL_TIMERS 58 select HAVE_SMP 59 select HAVE_ARM_ARCH_TIMER 60 select ARM_ERRATA_798181 if SMP 61 62config SOC_AM33XX 63 bool "TI AM33XX" 64 depends on ARCH_MULTI_V7 65 select ARCH_OMAP2PLUS 66 select ARM_CPU_SUSPEND if PM 67 select CPU_V7 68 select MULTI_IRQ_HANDLER 69 70config SOC_AM43XX 71 bool "TI AM43x" 72 depends on ARCH_MULTI_V7 73 select CPU_V7 74 select ARCH_OMAP2PLUS 75 select MULTI_IRQ_HANDLER 76 select ARM_GIC 77 select MACH_OMAP_GENERIC 78 79config ARCH_OMAP2PLUS 80 bool 81 select ARCH_HAS_BANDGAP 82 select ARCH_HAS_CPUFREQ 83 select ARCH_HAS_HOLES_MEMORYMODEL 84 select ARCH_OMAP 85 select ARCH_REQUIRE_GPIOLIB 86 select CLKSRC_MMIO 87 select COMMON_CLK 88 select GENERIC_CLOCKEVENTS 89 select GENERIC_IRQ_CHIP 90 select OMAP_DM_TIMER 91 select PINCTRL 92 select PROC_DEVICETREE if PROC_FS 93 select SOC_BUS 94 select SPARSE_IRQ 95 select TI_PRIV_EDMA 96 select USE_OF 97 help 98 Systems based on OMAP2, OMAP3, OMAP4 or OMAP5 99 100 101if ARCH_OMAP2PLUS 102 103menu "TI OMAP2/3/4 Specific Features" 104 105config ARCH_OMAP2PLUS_TYPICAL 106 bool "Typical OMAP configuration" 107 default y 108 select AEABI 109 select HIGHMEM 110 select I2C 111 select I2C_OMAP 112 select MENELAUS if ARCH_OMAP2 113 select NEON if CPU_V7 114 select PM_RUNTIME 115 select REGULATOR 116 select TWL4030_CORE if ARCH_OMAP3 || ARCH_OMAP4 117 select TWL4030_POWER if ARCH_OMAP3 || ARCH_OMAP4 118 select VFP 119 help 120 Compile a kernel suitable for booting most boards 121 122config SOC_HAS_OMAP2_SDRC 123 bool "OMAP2 SDRAM Controller support" 124 125config SOC_HAS_REALTIME_COUNTER 126 bool "Real time free running counter" 127 depends on SOC_OMAP5 || SOC_DRA7XX 128 default y 129 130config SOC_DRA7XX 131 bool "TI DRA7XX" 132 select ARM_ARCH_TIMER 133 select CPU_V7 134 select ARM_GIC 135 select HAVE_SMP 136 select COMMON_CLK 137 138comment "OMAP Core Type" 139 depends on ARCH_OMAP2 140 141config SOC_OMAP2420 142 bool "OMAP2420 support" 143 depends on ARCH_OMAP2 144 default y 145 select OMAP_DM_TIMER 146 select SOC_HAS_OMAP2_SDRC 147 148config SOC_OMAP2430 149 bool "OMAP2430 support" 150 depends on ARCH_OMAP2 151 default y 152 select SOC_HAS_OMAP2_SDRC 153 154config SOC_OMAP3430 155 bool "OMAP3430 support" 156 depends on ARCH_OMAP3 157 default y 158 select SOC_HAS_OMAP2_SDRC 159 160config SOC_TI81XX 161 bool "TI81XX support" 162 depends on ARCH_OMAP3 163 default y 164 165config OMAP_PACKAGE_ZAF 166 bool 167 168config OMAP_PACKAGE_ZAC 169 bool 170 171config OMAP_PACKAGE_CBC 172 bool 173 174config OMAP_PACKAGE_CBB 175 bool 176 177config OMAP_PACKAGE_CUS 178 bool 179 180config OMAP_PACKAGE_CBP 181 bool 182 183comment "OMAP Board Type" 184 depends on ARCH_OMAP2PLUS 185 186config MACH_OMAP_GENERIC 187 bool "Generic OMAP2+ board" 188 depends on ARCH_OMAP2PLUS 189 default y 190 help 191 Support for generic TI OMAP2+ boards using Flattened Device Tree. 192 More information at Documentation/devicetree 193 194config MACH_OMAP2_TUSB6010 195 bool 196 depends on ARCH_OMAP2 && SOC_OMAP2420 197 default y if MACH_NOKIA_N8X0 198 199config MACH_OMAP_H4 200 bool "OMAP 2420 H4 board" 201 depends on SOC_OMAP2420 202 default y 203 select OMAP_DEBUG_DEVICES 204 select OMAP_PACKAGE_ZAF 205 206config MACH_OMAP_2430SDP 207 bool "OMAP 2430 SDP board" 208 depends on SOC_OMAP2430 209 default y 210 select OMAP_PACKAGE_ZAC 211 212config MACH_OMAP3_BEAGLE 213 bool "OMAP3 BEAGLE board" 214 depends on ARCH_OMAP3 215 default y 216 select OMAP_PACKAGE_CBB 217 218config MACH_DEVKIT8000 219 bool "DEVKIT8000 board" 220 depends on ARCH_OMAP3 221 default y 222 select OMAP_PACKAGE_CUS 223 224config MACH_OMAP_LDP 225 bool "OMAP3 LDP board" 226 depends on ARCH_OMAP3 227 default y 228 select OMAP_PACKAGE_CBB 229 230config MACH_OMAP3530_LV_SOM 231 bool "OMAP3 Logic 3530 LV SOM board" 232 depends on ARCH_OMAP3 233 default y 234 select OMAP_PACKAGE_CBB 235 help 236 Support for the LogicPD OMAP3530 SOM Development kit 237 for full description please see the products webpage at 238 http://www.logicpd.com/products/development-kits/texas-instruments-zoom%E2%84%A2-omap35x-development-kit 239 240config MACH_OMAP3_TORPEDO 241 bool "OMAP3 Logic 35x Torpedo board" 242 depends on ARCH_OMAP3 243 default y 244 select OMAP_PACKAGE_CBB 245 help 246 Support for the LogicPD OMAP35x Torpedo Development kit 247 for full description please see the products webpage at 248 http://www.logicpd.com/products/development-kits/zoom-omap35x-torpedo-development-kit 249 250config MACH_OVERO 251 bool "Gumstix Overo board" 252 depends on ARCH_OMAP3 253 default y 254 select OMAP_PACKAGE_CBB 255 256config MACH_OMAP3EVM 257 bool "OMAP 3530 EVM board" 258 depends on ARCH_OMAP3 259 default y 260 select OMAP_PACKAGE_CBB 261 262config MACH_OMAP3517EVM 263 bool "OMAP3517/ AM3517 EVM board" 264 depends on ARCH_OMAP3 265 default y 266 select OMAP_PACKAGE_CBB 267 268config MACH_CRANEBOARD 269 bool "AM3517/05 CRANE board" 270 depends on ARCH_OMAP3 271 select OMAP_PACKAGE_CBB 272 273config MACH_OMAP3_PANDORA 274 bool "OMAP3 Pandora" 275 depends on ARCH_OMAP3 276 default y 277 select OMAP_PACKAGE_CBB 278 select REGULATOR_FIXED_VOLTAGE if REGULATOR 279 280config MACH_TOUCHBOOK 281 bool "OMAP3 Touch Book" 282 depends on ARCH_OMAP3 283 default y 284 select OMAP_PACKAGE_CBB 285 286config MACH_OMAP_3430SDP 287 bool "OMAP 3430 SDP board" 288 depends on ARCH_OMAP3 289 default y 290 select OMAP_PACKAGE_CBB 291 292config MACH_NOKIA_N800 293 bool 294 295config MACH_NOKIA_N810 296 bool 297 298config MACH_NOKIA_N810_WIMAX 299 bool 300 301config MACH_NOKIA_N8X0 302 bool "Nokia N800/N810" 303 depends on SOC_OMAP2420 304 default y 305 select MACH_NOKIA_N800 306 select MACH_NOKIA_N810 307 select MACH_NOKIA_N810_WIMAX 308 select OMAP_PACKAGE_ZAC 309 310config MACH_NOKIA_RM680 311 bool "Nokia N950 (RM-680) / N9 (RM-696) phones" 312 depends on ARCH_OMAP3 313 default y 314 select MACH_NOKIA_RM696 315 select OMAP_PACKAGE_CBB 316 317config MACH_NOKIA_RX51 318 bool "Nokia N900 (RX-51) phone" 319 depends on ARCH_OMAP3 320 default y 321 select OMAP_PACKAGE_CBB 322 323config MACH_OMAP_ZOOM2 324 bool "OMAP3 Zoom2 board" 325 depends on ARCH_OMAP3 326 default y 327 select OMAP_PACKAGE_CBB 328 select REGULATOR_FIXED_VOLTAGE if REGULATOR 329 330config MACH_OMAP_ZOOM3 331 bool "OMAP3630 Zoom3 board" 332 depends on ARCH_OMAP3 333 default y 334 select OMAP_PACKAGE_CBP 335 select REGULATOR_FIXED_VOLTAGE if REGULATOR 336 337config MACH_CM_T35 338 bool "CompuLab CM-T35/CM-T3730 modules" 339 depends on ARCH_OMAP3 340 default y 341 select MACH_CM_T3730 342 select OMAP_PACKAGE_CUS 343 344config MACH_CM_T3517 345 bool "CompuLab CM-T3517 module" 346 depends on ARCH_OMAP3 347 default y 348 select OMAP_PACKAGE_CBB 349 350config MACH_CM_T3730 351 bool 352 353config MACH_IGEP0020 354 bool "IGEP v2 board" 355 depends on ARCH_OMAP3 356 default y 357 select OMAP_PACKAGE_CBB 358 359config MACH_IGEP0030 360 bool "IGEP OMAP3 module" 361 depends on ARCH_OMAP3 362 default y 363 select MACH_IGEP0020 364 select OMAP_PACKAGE_CBB 365 366config MACH_SBC3530 367 bool "OMAP3 SBC STALKER board" 368 depends on ARCH_OMAP3 369 default y 370 select OMAP_PACKAGE_CUS 371 372config MACH_OMAP_3630SDP 373 bool "OMAP3630 SDP board" 374 depends on ARCH_OMAP3 375 default y 376 select OMAP_PACKAGE_CBP 377 378config MACH_TI8168EVM 379 bool "TI8168 Evaluation Module" 380 depends on SOC_TI81XX 381 default y 382 383config MACH_TI8148EVM 384 bool "TI8148 Evaluation Module" 385 depends on SOC_TI81XX 386 default y 387 388config OMAP3_EMU 389 bool "OMAP3 debugging peripherals" 390 depends on ARCH_OMAP3 391 select ARM_AMBA 392 select OC_ETM 393 help 394 Say Y here to enable debugging hardware of omap3 395 396config OMAP3_SDRC_AC_TIMING 397 bool "Enable SDRC AC timing register changes" 398 depends on ARCH_OMAP3 399 default n 400 help 401 If you know that none of your system initiators will attempt to 402 access SDRAM during CORE DVFS, select Y here. This should boost 403 SDRAM performance at lower CORE OPPs. There are relatively few 404 users who will wish to say yes at this point - almost everyone will 405 wish to say no. Selecting yes without understanding what is 406 going on could result in system crashes; 407 408config OMAP4_ERRATA_I688 409 bool "OMAP4 errata: Async Bridge Corruption" 410 depends on (ARCH_OMAP4 || SOC_OMAP5) && !ARCH_MULTIPLATFORM 411 select ARCH_HAS_BARRIERS 412 help 413 If a data is stalled inside asynchronous bridge because of back 414 pressure, it may be accepted multiple times, creating pointer 415 misalignment that will corrupt next transfers on that data path 416 until next reset of the system (No recovery procedure once the 417 issue is hit, the path remains consistently broken). Async bridge 418 can be found on path between MPU to EMIF and MPU to L3 interconnect. 419 This situation can happen only when the idle is initiated by a 420 Master Request Disconnection (which is trigged by software when 421 executing WFI on CPU). 422 The work-around for this errata needs all the initiators connected 423 through async bridge must ensure that data path is properly drained 424 before issuing WFI. This condition will be met if one Strongly ordered 425 access is performed to the target right before executing the WFI. 426 In MPU case, L3 T2ASYNC FIFO and DDR T2ASYNC FIFO needs to be drained. 427 IO barrier ensure that there is no synchronisation loss on initiators 428 operating on both interconnect port simultaneously. 429endmenu 430 431endif 432