xref: /openbmc/linux/arch/arm/mach-omap1/time.c (revision 462cd772)
1 /*
2  * linux/arch/arm/mach-omap1/time.c
3  *
4  * OMAP Timers
5  *
6  * Copyright (C) 2004 Nokia Corporation
7  * Partial timer rewrite and additional dynamic tick timer support by
8  * Tony Lindgen <tony@atomide.com> and
9  * Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
10  *
11  * MPU timer code based on the older MPU timer code for OMAP
12  * Copyright (C) 2000 RidgeRun, Inc.
13  * Author: Greg Lonnon <glonnon@ridgerun.com>
14  *
15  * This program is free software; you can redistribute it and/or modify it
16  * under the terms of the GNU General Public License as published by the
17  * Free Software Foundation; either version 2 of the License, or (at your
18  * option) any later version.
19  *
20  * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
21  * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
22  * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
23  * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
24  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
25  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
26  * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
27  * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
28  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
29  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
30  *
31  * You should have received a copy of the  GNU General Public License along
32  * with this program; if not, write  to the Free Software Foundation, Inc.,
33  * 675 Mass Ave, Cambridge, MA 02139, USA.
34  */
35 
36 #include <linux/kernel.h>
37 #include <linux/init.h>
38 #include <linux/delay.h>
39 #include <linux/interrupt.h>
40 #include <linux/spinlock.h>
41 #include <linux/clk.h>
42 #include <linux/err.h>
43 #include <linux/clocksource.h>
44 #include <linux/clockchips.h>
45 #include <linux/io.h>
46 #include <linux/sched_clock.h>
47 
48 #include <asm/irq.h>
49 
50 #include <asm/mach/irq.h>
51 #include <asm/mach/time.h>
52 
53 #include "hardware.h"
54 #include "mux.h"
55 #include "iomap.h"
56 #include "common.h"
57 #include "clock.h"
58 
59 #ifdef CONFIG_OMAP_MPU_TIMER
60 
61 #define OMAP_MPU_TIMER_BASE		OMAP_MPU_TIMER1_BASE
62 #define OMAP_MPU_TIMER_OFFSET		0x100
63 
64 typedef struct {
65 	u32 cntl;			/* CNTL_TIMER, R/W */
66 	u32 load_tim;			/* LOAD_TIM,   W */
67 	u32 read_tim;			/* READ_TIM,   R */
68 } omap_mpu_timer_regs_t;
69 
70 #define omap_mpu_timer_base(n)							\
71 ((omap_mpu_timer_regs_t __iomem *)OMAP1_IO_ADDRESS(OMAP_MPU_TIMER_BASE +	\
72 				 (n)*OMAP_MPU_TIMER_OFFSET))
73 
74 static inline unsigned long notrace omap_mpu_timer_read(int nr)
75 {
76 	omap_mpu_timer_regs_t __iomem *timer = omap_mpu_timer_base(nr);
77 	return readl(&timer->read_tim);
78 }
79 
80 static inline void omap_mpu_set_autoreset(int nr)
81 {
82 	omap_mpu_timer_regs_t __iomem *timer = omap_mpu_timer_base(nr);
83 
84 	writel(readl(&timer->cntl) | MPU_TIMER_AR, &timer->cntl);
85 }
86 
87 static inline void omap_mpu_remove_autoreset(int nr)
88 {
89 	omap_mpu_timer_regs_t __iomem *timer = omap_mpu_timer_base(nr);
90 
91 	writel(readl(&timer->cntl) & ~MPU_TIMER_AR, &timer->cntl);
92 }
93 
94 static inline void omap_mpu_timer_start(int nr, unsigned long load_val,
95 					int autoreset)
96 {
97 	omap_mpu_timer_regs_t __iomem *timer = omap_mpu_timer_base(nr);
98 	unsigned int timerflags = MPU_TIMER_CLOCK_ENABLE | MPU_TIMER_ST;
99 
100 	if (autoreset)
101 		timerflags |= MPU_TIMER_AR;
102 
103 	writel(MPU_TIMER_CLOCK_ENABLE, &timer->cntl);
104 	udelay(1);
105 	writel(load_val, &timer->load_tim);
106         udelay(1);
107 	writel(timerflags, &timer->cntl);
108 }
109 
110 static inline void omap_mpu_timer_stop(int nr)
111 {
112 	omap_mpu_timer_regs_t __iomem *timer = omap_mpu_timer_base(nr);
113 
114 	writel(readl(&timer->cntl) & ~MPU_TIMER_ST, &timer->cntl);
115 }
116 
117 /*
118  * ---------------------------------------------------------------------------
119  * MPU timer 1 ... count down to zero, interrupt, reload
120  * ---------------------------------------------------------------------------
121  */
122 static int omap_mpu_set_next_event(unsigned long cycles,
123 				   struct clock_event_device *evt)
124 {
125 	omap_mpu_timer_start(0, cycles, 0);
126 	return 0;
127 }
128 
129 static int omap_mpu_set_oneshot(struct clock_event_device *evt)
130 {
131 	omap_mpu_timer_stop(0);
132 	omap_mpu_remove_autoreset(0);
133 	return 0;
134 }
135 
136 static int omap_mpu_set_periodic(struct clock_event_device *evt)
137 {
138 	omap_mpu_set_autoreset(0);
139 	return 0;
140 }
141 
142 static struct clock_event_device clockevent_mpu_timer1 = {
143 	.name			= "mpu_timer1",
144 	.features		= CLOCK_EVT_FEAT_PERIODIC |
145 				  CLOCK_EVT_FEAT_ONESHOT,
146 	.set_next_event		= omap_mpu_set_next_event,
147 	.set_state_periodic	= omap_mpu_set_periodic,
148 	.set_state_oneshot	= omap_mpu_set_oneshot,
149 };
150 
151 static irqreturn_t omap_mpu_timer1_interrupt(int irq, void *dev_id)
152 {
153 	struct clock_event_device *evt = &clockevent_mpu_timer1;
154 
155 	evt->event_handler(evt);
156 
157 	return IRQ_HANDLED;
158 }
159 
160 static __init void omap_init_mpu_timer(unsigned long rate)
161 {
162 	if (request_irq(INT_TIMER1, omap_mpu_timer1_interrupt,
163 			IRQF_TIMER | IRQF_IRQPOLL, "mpu_timer1", NULL))
164 		pr_err("Failed to request irq %d (mpu_timer1)\n", INT_TIMER1);
165 	omap_mpu_timer_start(0, (rate / HZ) - 1, 1);
166 
167 	clockevent_mpu_timer1.cpumask = cpumask_of(0);
168 	clockevents_config_and_register(&clockevent_mpu_timer1, rate,
169 					1, -1);
170 }
171 
172 
173 /*
174  * ---------------------------------------------------------------------------
175  * MPU timer 2 ... free running 32-bit clock source and scheduler clock
176  * ---------------------------------------------------------------------------
177  */
178 
179 static u64 notrace omap_mpu_read_sched_clock(void)
180 {
181 	return ~omap_mpu_timer_read(1);
182 }
183 
184 static void __init omap_init_clocksource(unsigned long rate)
185 {
186 	omap_mpu_timer_regs_t __iomem *timer = omap_mpu_timer_base(1);
187 	static char err[] __initdata = KERN_ERR
188 			"%s: can't register clocksource!\n";
189 
190 	omap_mpu_timer_start(1, ~0, 1);
191 	sched_clock_register(omap_mpu_read_sched_clock, 32, rate);
192 
193 	if (clocksource_mmio_init(&timer->read_tim, "mpu_timer2", rate,
194 			300, 32, clocksource_mmio_readl_down))
195 		printk(err, "mpu_timer2");
196 }
197 
198 static void __init omap_mpu_timer_init(void)
199 {
200 	struct clk	*ck_ref = clk_get(NULL, "ck_ref");
201 	unsigned long	rate;
202 
203 	BUG_ON(IS_ERR(ck_ref));
204 
205 	rate = clk_get_rate(ck_ref);
206 	clk_put(ck_ref);
207 
208 	/* PTV = 0 */
209 	rate /= 2;
210 
211 	omap_init_mpu_timer(rate);
212 	omap_init_clocksource(rate);
213 }
214 
215 #else
216 static inline void omap_mpu_timer_init(void)
217 {
218 	pr_err("Bogus timer, should not happen\n");
219 }
220 #endif	/* CONFIG_OMAP_MPU_TIMER */
221 
222 /*
223  * ---------------------------------------------------------------------------
224  * Timer initialization
225  * ---------------------------------------------------------------------------
226  */
227 void __init omap1_timer_init(void)
228 {
229 	omap1_clk_init();
230 	omap1_mux_init();
231 
232 	if (omap_32k_timer_init() != 0)
233 		omap_mpu_timer_init();
234 }
235