1 /* 2 * linux/arch/arm/mach-omap1/pm.c 3 * 4 * OMAP Power Management Routines 5 * 6 * Original code for the SA11x0: 7 * Copyright (c) 2001 Cliff Brake <cbrake@accelent.com> 8 * 9 * Modified for the PXA250 by Nicolas Pitre: 10 * Copyright (c) 2002 Monta Vista Software, Inc. 11 * 12 * Modified for the OMAP1510 by David Singleton: 13 * Copyright (c) 2002 Monta Vista Software, Inc. 14 * 15 * Cleanup 2004 for OMAP1510/1610 by Dirk Behme <dirk.behme@de.bosch.com> 16 * 17 * This program is free software; you can redistribute it and/or modify it 18 * under the terms of the GNU General Public License as published by the 19 * Free Software Foundation; either version 2 of the License, or (at your 20 * option) any later version. 21 * 22 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED 23 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 24 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN 25 * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 26 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 27 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF 28 * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 29 * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 30 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 31 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 32 * 33 * You should have received a copy of the GNU General Public License along 34 * with this program; if not, write to the Free Software Foundation, Inc., 35 * 675 Mass Ave, Cambridge, MA 02139, USA. 36 */ 37 38 #include <linux/suspend.h> 39 #include <linux/sched.h> 40 #include <linux/proc_fs.h> 41 #include <linux/interrupt.h> 42 #include <linux/sysfs.h> 43 #include <linux/module.h> 44 #include <linux/io.h> 45 #include <linux/atomic.h> 46 47 #include <asm/system_misc.h> 48 #include <asm/irq.h> 49 #include <asm/mach/time.h> 50 #include <asm/mach/irq.h> 51 52 #include <plat/cpu.h> 53 #include <plat/clock.h> 54 #include <plat/sram.h> 55 #include <plat/tc.h> 56 #include <plat/mux.h> 57 #include <plat/dma.h> 58 #include <plat/dmtimer.h> 59 60 #include <mach/irqs.h> 61 62 #include "iomap.h" 63 #include "pm.h" 64 65 static unsigned int arm_sleep_save[ARM_SLEEP_SAVE_SIZE]; 66 static unsigned short dsp_sleep_save[DSP_SLEEP_SAVE_SIZE]; 67 static unsigned short ulpd_sleep_save[ULPD_SLEEP_SAVE_SIZE]; 68 static unsigned int mpui7xx_sleep_save[MPUI7XX_SLEEP_SAVE_SIZE]; 69 static unsigned int mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_SIZE]; 70 static unsigned int mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_SIZE]; 71 72 #ifdef CONFIG_OMAP_32K_TIMER 73 74 static unsigned short enable_dyn_sleep = 1; 75 76 static ssize_t idle_show(struct kobject *kobj, struct kobj_attribute *attr, 77 char *buf) 78 { 79 return sprintf(buf, "%hu\n", enable_dyn_sleep); 80 } 81 82 static ssize_t idle_store(struct kobject *kobj, struct kobj_attribute *attr, 83 const char * buf, size_t n) 84 { 85 unsigned short value; 86 if (sscanf(buf, "%hu", &value) != 1 || 87 (value != 0 && value != 1)) { 88 printk(KERN_ERR "idle_sleep_store: Invalid value\n"); 89 return -EINVAL; 90 } 91 enable_dyn_sleep = value; 92 return n; 93 } 94 95 static struct kobj_attribute sleep_while_idle_attr = 96 __ATTR(sleep_while_idle, 0644, idle_show, idle_store); 97 98 #endif 99 100 static void (*omap_sram_suspend)(unsigned long r0, unsigned long r1) = NULL; 101 102 /* 103 * Let's power down on idle, but only if we are really 104 * idle, because once we start down the path of 105 * going idle we continue to do idle even if we get 106 * a clock tick interrupt . . 107 */ 108 void omap1_pm_idle(void) 109 { 110 extern __u32 arm_idlect1_mask; 111 __u32 use_idlect1 = arm_idlect1_mask; 112 int do_sleep = 0; 113 114 local_fiq_disable(); 115 116 #if defined(CONFIG_OMAP_MPU_TIMER) && !defined(CONFIG_OMAP_DM_TIMER) 117 #warning Enable 32kHz OS timer in order to allow sleep states in idle 118 use_idlect1 = use_idlect1 & ~(1 << 9); 119 #else 120 121 while (enable_dyn_sleep) { 122 123 #ifdef CONFIG_CBUS_TAHVO_USB 124 extern int vbus_active; 125 /* Clock requirements? */ 126 if (vbus_active) 127 break; 128 #endif 129 do_sleep = 1; 130 break; 131 } 132 133 #endif 134 135 #ifdef CONFIG_OMAP_DM_TIMER 136 use_idlect1 = omap_dm_timer_modify_idlect_mask(use_idlect1); 137 #endif 138 139 if (omap_dma_running()) 140 use_idlect1 &= ~(1 << 6); 141 142 /* We should be able to remove the do_sleep variable and multiple 143 * tests above as soon as drivers, timer and DMA code have been fixed. 144 * Even the sleep block count should become obsolete. */ 145 if ((use_idlect1 != ~0) || !do_sleep) { 146 147 __u32 saved_idlect1 = omap_readl(ARM_IDLECT1); 148 if (cpu_is_omap15xx()) 149 use_idlect1 &= OMAP1510_BIG_SLEEP_REQUEST; 150 else 151 use_idlect1 &= OMAP1610_IDLECT1_SLEEP_VAL; 152 omap_writel(use_idlect1, ARM_IDLECT1); 153 __asm__ volatile ("mcr p15, 0, r0, c7, c0, 4"); 154 omap_writel(saved_idlect1, ARM_IDLECT1); 155 156 local_fiq_enable(); 157 return; 158 } 159 omap_sram_suspend(omap_readl(ARM_IDLECT1), 160 omap_readl(ARM_IDLECT2)); 161 162 local_fiq_enable(); 163 } 164 165 /* 166 * Configuration of the wakeup event is board specific. For the 167 * moment we put it into this helper function. Later it may move 168 * to board specific files. 169 */ 170 static void omap_pm_wakeup_setup(void) 171 { 172 u32 level1_wake = 0; 173 u32 level2_wake = OMAP_IRQ_BIT(INT_UART2); 174 175 /* 176 * Turn off all interrupts except GPIO bank 1, L1-2nd level cascade, 177 * and the L2 wakeup interrupts: keypad and UART2. Note that the 178 * drivers must still separately call omap_set_gpio_wakeup() to 179 * wake up to a GPIO interrupt. 180 */ 181 if (cpu_is_omap7xx()) 182 level1_wake = OMAP_IRQ_BIT(INT_7XX_GPIO_BANK1) | 183 OMAP_IRQ_BIT(INT_7XX_IH2_IRQ); 184 else if (cpu_is_omap15xx()) 185 level1_wake = OMAP_IRQ_BIT(INT_GPIO_BANK1) | 186 OMAP_IRQ_BIT(INT_1510_IH2_IRQ); 187 else if (cpu_is_omap16xx()) 188 level1_wake = OMAP_IRQ_BIT(INT_GPIO_BANK1) | 189 OMAP_IRQ_BIT(INT_1610_IH2_IRQ); 190 191 omap_writel(~level1_wake, OMAP_IH1_MIR); 192 193 if (cpu_is_omap7xx()) { 194 omap_writel(~level2_wake, OMAP_IH2_0_MIR); 195 omap_writel(~(OMAP_IRQ_BIT(INT_7XX_WAKE_UP_REQ) | 196 OMAP_IRQ_BIT(INT_7XX_MPUIO_KEYPAD)), 197 OMAP_IH2_1_MIR); 198 } else if (cpu_is_omap15xx()) { 199 level2_wake |= OMAP_IRQ_BIT(INT_KEYBOARD); 200 omap_writel(~level2_wake, OMAP_IH2_MIR); 201 } else if (cpu_is_omap16xx()) { 202 level2_wake |= OMAP_IRQ_BIT(INT_KEYBOARD); 203 omap_writel(~level2_wake, OMAP_IH2_0_MIR); 204 205 /* INT_1610_WAKE_UP_REQ is needed for GPIO wakeup... */ 206 omap_writel(~OMAP_IRQ_BIT(INT_1610_WAKE_UP_REQ), 207 OMAP_IH2_1_MIR); 208 omap_writel(~0x0, OMAP_IH2_2_MIR); 209 omap_writel(~0x0, OMAP_IH2_3_MIR); 210 } 211 212 /* New IRQ agreement, recalculate in cascade order */ 213 omap_writel(1, OMAP_IH2_CONTROL); 214 omap_writel(1, OMAP_IH1_CONTROL); 215 } 216 217 #define EN_DSPCK 13 /* ARM_CKCTL */ 218 #define EN_APICK 6 /* ARM_IDLECT2 */ 219 #define DSP_EN 1 /* ARM_RSTCT1 */ 220 221 void omap1_pm_suspend(void) 222 { 223 unsigned long arg0 = 0, arg1 = 0; 224 225 printk(KERN_INFO "PM: OMAP%x is trying to enter deep sleep...\n", 226 omap_rev()); 227 228 omap_serial_wake_trigger(1); 229 230 if (!cpu_is_omap15xx()) 231 omap_writew(0xffff, ULPD_SOFT_DISABLE_REQ_REG); 232 233 /* 234 * Step 1: turn off interrupts (FIXME: NOTE: already disabled) 235 */ 236 237 local_irq_disable(); 238 local_fiq_disable(); 239 240 /* 241 * Step 2: save registers 242 * 243 * The omap is a strange/beautiful device. The caches, memory 244 * and register state are preserved across power saves. 245 * We have to save and restore very little register state to 246 * idle the omap. 247 * 248 * Save interrupt, MPUI, ARM and UPLD control registers. 249 */ 250 251 if (cpu_is_omap7xx()) { 252 MPUI7XX_SAVE(OMAP_IH1_MIR); 253 MPUI7XX_SAVE(OMAP_IH2_0_MIR); 254 MPUI7XX_SAVE(OMAP_IH2_1_MIR); 255 MPUI7XX_SAVE(MPUI_CTRL); 256 MPUI7XX_SAVE(MPUI_DSP_BOOT_CONFIG); 257 MPUI7XX_SAVE(MPUI_DSP_API_CONFIG); 258 MPUI7XX_SAVE(EMIFS_CONFIG); 259 MPUI7XX_SAVE(EMIFF_SDRAM_CONFIG); 260 261 } else if (cpu_is_omap15xx()) { 262 MPUI1510_SAVE(OMAP_IH1_MIR); 263 MPUI1510_SAVE(OMAP_IH2_MIR); 264 MPUI1510_SAVE(MPUI_CTRL); 265 MPUI1510_SAVE(MPUI_DSP_BOOT_CONFIG); 266 MPUI1510_SAVE(MPUI_DSP_API_CONFIG); 267 MPUI1510_SAVE(EMIFS_CONFIG); 268 MPUI1510_SAVE(EMIFF_SDRAM_CONFIG); 269 } else if (cpu_is_omap16xx()) { 270 MPUI1610_SAVE(OMAP_IH1_MIR); 271 MPUI1610_SAVE(OMAP_IH2_0_MIR); 272 MPUI1610_SAVE(OMAP_IH2_1_MIR); 273 MPUI1610_SAVE(OMAP_IH2_2_MIR); 274 MPUI1610_SAVE(OMAP_IH2_3_MIR); 275 MPUI1610_SAVE(MPUI_CTRL); 276 MPUI1610_SAVE(MPUI_DSP_BOOT_CONFIG); 277 MPUI1610_SAVE(MPUI_DSP_API_CONFIG); 278 MPUI1610_SAVE(EMIFS_CONFIG); 279 MPUI1610_SAVE(EMIFF_SDRAM_CONFIG); 280 } 281 282 ARM_SAVE(ARM_CKCTL); 283 ARM_SAVE(ARM_IDLECT1); 284 ARM_SAVE(ARM_IDLECT2); 285 if (!(cpu_is_omap15xx())) 286 ARM_SAVE(ARM_IDLECT3); 287 ARM_SAVE(ARM_EWUPCT); 288 ARM_SAVE(ARM_RSTCT1); 289 ARM_SAVE(ARM_RSTCT2); 290 ARM_SAVE(ARM_SYSST); 291 ULPD_SAVE(ULPD_CLOCK_CTRL); 292 ULPD_SAVE(ULPD_STATUS_REQ); 293 294 /* (Step 3 removed - we now allow deep sleep by default) */ 295 296 /* 297 * Step 4: OMAP DSP Shutdown 298 */ 299 300 /* stop DSP */ 301 omap_writew(omap_readw(ARM_RSTCT1) & ~(1 << DSP_EN), ARM_RSTCT1); 302 303 /* shut down dsp_ck */ 304 if (!cpu_is_omap7xx()) 305 omap_writew(omap_readw(ARM_CKCTL) & ~(1 << EN_DSPCK), ARM_CKCTL); 306 307 /* temporarily enabling api_ck to access DSP registers */ 308 omap_writew(omap_readw(ARM_IDLECT2) | 1 << EN_APICK, ARM_IDLECT2); 309 310 /* save DSP registers */ 311 DSP_SAVE(DSP_IDLECT2); 312 313 /* Stop all DSP domain clocks */ 314 __raw_writew(0, DSP_IDLECT2); 315 316 /* 317 * Step 5: Wakeup Event Setup 318 */ 319 320 omap_pm_wakeup_setup(); 321 322 /* 323 * Step 6: ARM and Traffic controller shutdown 324 */ 325 326 /* disable ARM watchdog */ 327 omap_writel(0x00F5, OMAP_WDT_TIMER_MODE); 328 omap_writel(0x00A0, OMAP_WDT_TIMER_MODE); 329 330 /* 331 * Step 6b: ARM and Traffic controller shutdown 332 * 333 * Step 6 continues here. Prepare jump to power management 334 * assembly code in internal SRAM. 335 * 336 * Since the omap_cpu_suspend routine has been copied to 337 * SRAM, we'll do an indirect procedure call to it and pass the 338 * contents of arm_idlect1 and arm_idlect2 so it can restore 339 * them when it wakes up and it will return. 340 */ 341 342 arg0 = arm_sleep_save[ARM_SLEEP_SAVE_ARM_IDLECT1]; 343 arg1 = arm_sleep_save[ARM_SLEEP_SAVE_ARM_IDLECT2]; 344 345 /* 346 * Step 6c: ARM and Traffic controller shutdown 347 * 348 * Jump to assembly code. The processor will stay there 349 * until wake up. 350 */ 351 omap_sram_suspend(arg0, arg1); 352 353 /* 354 * If we are here, processor is woken up! 355 */ 356 357 /* 358 * Restore DSP clocks 359 */ 360 361 /* again temporarily enabling api_ck to access DSP registers */ 362 omap_writew(omap_readw(ARM_IDLECT2) | 1 << EN_APICK, ARM_IDLECT2); 363 364 /* Restore DSP domain clocks */ 365 DSP_RESTORE(DSP_IDLECT2); 366 367 /* 368 * Restore ARM state, except ARM_IDLECT1/2 which omap_cpu_suspend did 369 */ 370 371 if (!(cpu_is_omap15xx())) 372 ARM_RESTORE(ARM_IDLECT3); 373 ARM_RESTORE(ARM_CKCTL); 374 ARM_RESTORE(ARM_EWUPCT); 375 ARM_RESTORE(ARM_RSTCT1); 376 ARM_RESTORE(ARM_RSTCT2); 377 ARM_RESTORE(ARM_SYSST); 378 ULPD_RESTORE(ULPD_CLOCK_CTRL); 379 ULPD_RESTORE(ULPD_STATUS_REQ); 380 381 if (cpu_is_omap7xx()) { 382 MPUI7XX_RESTORE(EMIFS_CONFIG); 383 MPUI7XX_RESTORE(EMIFF_SDRAM_CONFIG); 384 MPUI7XX_RESTORE(OMAP_IH1_MIR); 385 MPUI7XX_RESTORE(OMAP_IH2_0_MIR); 386 MPUI7XX_RESTORE(OMAP_IH2_1_MIR); 387 } else if (cpu_is_omap15xx()) { 388 MPUI1510_RESTORE(MPUI_CTRL); 389 MPUI1510_RESTORE(MPUI_DSP_BOOT_CONFIG); 390 MPUI1510_RESTORE(MPUI_DSP_API_CONFIG); 391 MPUI1510_RESTORE(EMIFS_CONFIG); 392 MPUI1510_RESTORE(EMIFF_SDRAM_CONFIG); 393 MPUI1510_RESTORE(OMAP_IH1_MIR); 394 MPUI1510_RESTORE(OMAP_IH2_MIR); 395 } else if (cpu_is_omap16xx()) { 396 MPUI1610_RESTORE(MPUI_CTRL); 397 MPUI1610_RESTORE(MPUI_DSP_BOOT_CONFIG); 398 MPUI1610_RESTORE(MPUI_DSP_API_CONFIG); 399 MPUI1610_RESTORE(EMIFS_CONFIG); 400 MPUI1610_RESTORE(EMIFF_SDRAM_CONFIG); 401 402 MPUI1610_RESTORE(OMAP_IH1_MIR); 403 MPUI1610_RESTORE(OMAP_IH2_0_MIR); 404 MPUI1610_RESTORE(OMAP_IH2_1_MIR); 405 MPUI1610_RESTORE(OMAP_IH2_2_MIR); 406 MPUI1610_RESTORE(OMAP_IH2_3_MIR); 407 } 408 409 if (!cpu_is_omap15xx()) 410 omap_writew(0, ULPD_SOFT_DISABLE_REQ_REG); 411 412 /* 413 * Re-enable interrupts 414 */ 415 416 local_irq_enable(); 417 local_fiq_enable(); 418 419 omap_serial_wake_trigger(0); 420 421 printk(KERN_INFO "PM: OMAP%x is re-starting from deep sleep...\n", 422 omap_rev()); 423 } 424 425 #if defined(DEBUG) && defined(CONFIG_PROC_FS) 426 static int g_read_completed; 427 428 /* 429 * Read system PM registers for debugging 430 */ 431 static int omap_pm_read_proc( 432 char *page_buffer, 433 char **my_first_byte, 434 off_t virtual_start, 435 int length, 436 int *eof, 437 void *data) 438 { 439 int my_buffer_offset = 0; 440 char * const my_base = page_buffer; 441 442 ARM_SAVE(ARM_CKCTL); 443 ARM_SAVE(ARM_IDLECT1); 444 ARM_SAVE(ARM_IDLECT2); 445 if (!(cpu_is_omap15xx())) 446 ARM_SAVE(ARM_IDLECT3); 447 ARM_SAVE(ARM_EWUPCT); 448 ARM_SAVE(ARM_RSTCT1); 449 ARM_SAVE(ARM_RSTCT2); 450 ARM_SAVE(ARM_SYSST); 451 452 ULPD_SAVE(ULPD_IT_STATUS); 453 ULPD_SAVE(ULPD_CLOCK_CTRL); 454 ULPD_SAVE(ULPD_SOFT_REQ); 455 ULPD_SAVE(ULPD_STATUS_REQ); 456 ULPD_SAVE(ULPD_DPLL_CTRL); 457 ULPD_SAVE(ULPD_POWER_CTRL); 458 459 if (cpu_is_omap7xx()) { 460 MPUI7XX_SAVE(MPUI_CTRL); 461 MPUI7XX_SAVE(MPUI_DSP_STATUS); 462 MPUI7XX_SAVE(MPUI_DSP_BOOT_CONFIG); 463 MPUI7XX_SAVE(MPUI_DSP_API_CONFIG); 464 MPUI7XX_SAVE(EMIFF_SDRAM_CONFIG); 465 MPUI7XX_SAVE(EMIFS_CONFIG); 466 } else if (cpu_is_omap15xx()) { 467 MPUI1510_SAVE(MPUI_CTRL); 468 MPUI1510_SAVE(MPUI_DSP_STATUS); 469 MPUI1510_SAVE(MPUI_DSP_BOOT_CONFIG); 470 MPUI1510_SAVE(MPUI_DSP_API_CONFIG); 471 MPUI1510_SAVE(EMIFF_SDRAM_CONFIG); 472 MPUI1510_SAVE(EMIFS_CONFIG); 473 } else if (cpu_is_omap16xx()) { 474 MPUI1610_SAVE(MPUI_CTRL); 475 MPUI1610_SAVE(MPUI_DSP_STATUS); 476 MPUI1610_SAVE(MPUI_DSP_BOOT_CONFIG); 477 MPUI1610_SAVE(MPUI_DSP_API_CONFIG); 478 MPUI1610_SAVE(EMIFF_SDRAM_CONFIG); 479 MPUI1610_SAVE(EMIFS_CONFIG); 480 } 481 482 if (virtual_start == 0) { 483 g_read_completed = 0; 484 485 my_buffer_offset += sprintf(my_base + my_buffer_offset, 486 "ARM_CKCTL_REG: 0x%-8x \n" 487 "ARM_IDLECT1_REG: 0x%-8x \n" 488 "ARM_IDLECT2_REG: 0x%-8x \n" 489 "ARM_IDLECT3_REG: 0x%-8x \n" 490 "ARM_EWUPCT_REG: 0x%-8x \n" 491 "ARM_RSTCT1_REG: 0x%-8x \n" 492 "ARM_RSTCT2_REG: 0x%-8x \n" 493 "ARM_SYSST_REG: 0x%-8x \n" 494 "ULPD_IT_STATUS_REG: 0x%-4x \n" 495 "ULPD_CLOCK_CTRL_REG: 0x%-4x \n" 496 "ULPD_SOFT_REQ_REG: 0x%-4x \n" 497 "ULPD_DPLL_CTRL_REG: 0x%-4x \n" 498 "ULPD_STATUS_REQ_REG: 0x%-4x \n" 499 "ULPD_POWER_CTRL_REG: 0x%-4x \n", 500 ARM_SHOW(ARM_CKCTL), 501 ARM_SHOW(ARM_IDLECT1), 502 ARM_SHOW(ARM_IDLECT2), 503 ARM_SHOW(ARM_IDLECT3), 504 ARM_SHOW(ARM_EWUPCT), 505 ARM_SHOW(ARM_RSTCT1), 506 ARM_SHOW(ARM_RSTCT2), 507 ARM_SHOW(ARM_SYSST), 508 ULPD_SHOW(ULPD_IT_STATUS), 509 ULPD_SHOW(ULPD_CLOCK_CTRL), 510 ULPD_SHOW(ULPD_SOFT_REQ), 511 ULPD_SHOW(ULPD_DPLL_CTRL), 512 ULPD_SHOW(ULPD_STATUS_REQ), 513 ULPD_SHOW(ULPD_POWER_CTRL)); 514 515 if (cpu_is_omap7xx()) { 516 my_buffer_offset += sprintf(my_base + my_buffer_offset, 517 "MPUI7XX_CTRL_REG 0x%-8x \n" 518 "MPUI7XX_DSP_STATUS_REG: 0x%-8x \n" 519 "MPUI7XX_DSP_BOOT_CONFIG_REG: 0x%-8x \n" 520 "MPUI7XX_DSP_API_CONFIG_REG: 0x%-8x \n" 521 "MPUI7XX_SDRAM_CONFIG_REG: 0x%-8x \n" 522 "MPUI7XX_EMIFS_CONFIG_REG: 0x%-8x \n", 523 MPUI7XX_SHOW(MPUI_CTRL), 524 MPUI7XX_SHOW(MPUI_DSP_STATUS), 525 MPUI7XX_SHOW(MPUI_DSP_BOOT_CONFIG), 526 MPUI7XX_SHOW(MPUI_DSP_API_CONFIG), 527 MPUI7XX_SHOW(EMIFF_SDRAM_CONFIG), 528 MPUI7XX_SHOW(EMIFS_CONFIG)); 529 } else if (cpu_is_omap15xx()) { 530 my_buffer_offset += sprintf(my_base + my_buffer_offset, 531 "MPUI1510_CTRL_REG 0x%-8x \n" 532 "MPUI1510_DSP_STATUS_REG: 0x%-8x \n" 533 "MPUI1510_DSP_BOOT_CONFIG_REG: 0x%-8x \n" 534 "MPUI1510_DSP_API_CONFIG_REG: 0x%-8x \n" 535 "MPUI1510_SDRAM_CONFIG_REG: 0x%-8x \n" 536 "MPUI1510_EMIFS_CONFIG_REG: 0x%-8x \n", 537 MPUI1510_SHOW(MPUI_CTRL), 538 MPUI1510_SHOW(MPUI_DSP_STATUS), 539 MPUI1510_SHOW(MPUI_DSP_BOOT_CONFIG), 540 MPUI1510_SHOW(MPUI_DSP_API_CONFIG), 541 MPUI1510_SHOW(EMIFF_SDRAM_CONFIG), 542 MPUI1510_SHOW(EMIFS_CONFIG)); 543 } else if (cpu_is_omap16xx()) { 544 my_buffer_offset += sprintf(my_base + my_buffer_offset, 545 "MPUI1610_CTRL_REG 0x%-8x \n" 546 "MPUI1610_DSP_STATUS_REG: 0x%-8x \n" 547 "MPUI1610_DSP_BOOT_CONFIG_REG: 0x%-8x \n" 548 "MPUI1610_DSP_API_CONFIG_REG: 0x%-8x \n" 549 "MPUI1610_SDRAM_CONFIG_REG: 0x%-8x \n" 550 "MPUI1610_EMIFS_CONFIG_REG: 0x%-8x \n", 551 MPUI1610_SHOW(MPUI_CTRL), 552 MPUI1610_SHOW(MPUI_DSP_STATUS), 553 MPUI1610_SHOW(MPUI_DSP_BOOT_CONFIG), 554 MPUI1610_SHOW(MPUI_DSP_API_CONFIG), 555 MPUI1610_SHOW(EMIFF_SDRAM_CONFIG), 556 MPUI1610_SHOW(EMIFS_CONFIG)); 557 } 558 559 g_read_completed++; 560 } else if (g_read_completed >= 1) { 561 *eof = 1; 562 return 0; 563 } 564 g_read_completed++; 565 566 *my_first_byte = page_buffer; 567 return my_buffer_offset; 568 } 569 570 static void omap_pm_init_proc(void) 571 { 572 /* XXX Appears to leak memory */ 573 create_proc_read_entry("driver/omap_pm", 574 S_IWUSR | S_IRUGO, NULL, 575 omap_pm_read_proc, NULL); 576 } 577 578 #endif /* DEBUG && CONFIG_PROC_FS */ 579 580 /* 581 * omap_pm_prepare - Do preliminary suspend work. 582 * 583 */ 584 static int omap_pm_prepare(void) 585 { 586 /* We cannot sleep in idle until we have resumed */ 587 disable_hlt(); 588 589 return 0; 590 } 591 592 593 /* 594 * omap_pm_enter - Actually enter a sleep state. 595 * @state: State we're entering. 596 * 597 */ 598 599 static int omap_pm_enter(suspend_state_t state) 600 { 601 switch (state) 602 { 603 case PM_SUSPEND_STANDBY: 604 case PM_SUSPEND_MEM: 605 omap1_pm_suspend(); 606 break; 607 default: 608 return -EINVAL; 609 } 610 611 return 0; 612 } 613 614 615 /** 616 * omap_pm_finish - Finish up suspend sequence. 617 * 618 * This is called after we wake back up (or if entering the sleep state 619 * failed). 620 */ 621 622 static void omap_pm_finish(void) 623 { 624 enable_hlt(); 625 } 626 627 628 static irqreturn_t omap_wakeup_interrupt(int irq, void *dev) 629 { 630 return IRQ_HANDLED; 631 } 632 633 static struct irqaction omap_wakeup_irq = { 634 .name = "peripheral wakeup", 635 .flags = IRQF_DISABLED, 636 .handler = omap_wakeup_interrupt 637 }; 638 639 640 641 static const struct platform_suspend_ops omap_pm_ops = { 642 .prepare = omap_pm_prepare, 643 .enter = omap_pm_enter, 644 .finish = omap_pm_finish, 645 .valid = suspend_valid_only_mem, 646 }; 647 648 static int __init omap_pm_init(void) 649 { 650 651 #ifdef CONFIG_OMAP_32K_TIMER 652 int error; 653 #endif 654 655 if (!cpu_class_is_omap1()) 656 return -ENODEV; 657 658 printk("Power Management for TI OMAP.\n"); 659 660 /* 661 * We copy the assembler sleep/wakeup routines to SRAM. 662 * These routines need to be in SRAM as that's the only 663 * memory the MPU can see when it wakes up. 664 */ 665 if (cpu_is_omap7xx()) { 666 omap_sram_suspend = omap_sram_push(omap7xx_cpu_suspend, 667 omap7xx_cpu_suspend_sz); 668 } else if (cpu_is_omap15xx()) { 669 omap_sram_suspend = omap_sram_push(omap1510_cpu_suspend, 670 omap1510_cpu_suspend_sz); 671 } else if (cpu_is_omap16xx()) { 672 omap_sram_suspend = omap_sram_push(omap1610_cpu_suspend, 673 omap1610_cpu_suspend_sz); 674 } 675 676 if (omap_sram_suspend == NULL) { 677 printk(KERN_ERR "PM not initialized: Missing SRAM support\n"); 678 return -ENODEV; 679 } 680 681 arm_pm_idle = omap1_pm_idle; 682 683 if (cpu_is_omap7xx()) 684 setup_irq(INT_7XX_WAKE_UP_REQ, &omap_wakeup_irq); 685 else if (cpu_is_omap16xx()) 686 setup_irq(INT_1610_WAKE_UP_REQ, &omap_wakeup_irq); 687 688 /* Program new power ramp-up time 689 * (0 for most boards since we don't lower voltage when in deep sleep) 690 */ 691 omap_writew(ULPD_SETUP_ANALOG_CELL_3_VAL, ULPD_SETUP_ANALOG_CELL_3); 692 693 /* Setup ULPD POWER_CTRL_REG - enter deep sleep whenever possible */ 694 omap_writew(ULPD_POWER_CTRL_REG_VAL, ULPD_POWER_CTRL); 695 696 /* Configure IDLECT3 */ 697 if (cpu_is_omap7xx()) 698 omap_writel(OMAP7XX_IDLECT3_VAL, OMAP7XX_IDLECT3); 699 else if (cpu_is_omap16xx()) 700 omap_writel(OMAP1610_IDLECT3_VAL, OMAP1610_IDLECT3); 701 702 suspend_set_ops(&omap_pm_ops); 703 704 #if defined(DEBUG) && defined(CONFIG_PROC_FS) 705 omap_pm_init_proc(); 706 #endif 707 708 #ifdef CONFIG_OMAP_32K_TIMER 709 error = sysfs_create_file(power_kobj, &sleep_while_idle_attr.attr); 710 if (error) 711 printk(KERN_ERR "sysfs_create_file failed: %d\n", error); 712 #endif 713 714 if (cpu_is_omap16xx()) { 715 /* configure LOW_PWR pin */ 716 omap_cfg_reg(T20_1610_LOW_PWR); 717 } 718 719 return 0; 720 } 721 __initcall(omap_pm_init); 722