1 /* 2 * linux/arch/arm/mach-omap1/irq.c 3 * 4 * Interrupt handler for all OMAP boards 5 * 6 * Copyright (C) 2004 Nokia Corporation 7 * Written by Tony Lindgren <tony@atomide.com> 8 * Major cleanups by Juha Yrjölä <juha.yrjola@nokia.com> 9 * 10 * Completely re-written to support various OMAP chips with bank specific 11 * interrupt handlers. 12 * 13 * Some snippets of the code taken from the older OMAP interrupt handler 14 * Copyright (C) 2001 RidgeRun, Inc. Greg Lonnon <glonnon@ridgerun.com> 15 * 16 * GPIO interrupt handler moved to gpio.c by Juha Yrjola 17 * 18 * This program is free software; you can redistribute it and/or modify it 19 * under the terms of the GNU General Public License as published by the 20 * Free Software Foundation; either version 2 of the License, or (at your 21 * option) any later version. 22 * 23 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED 24 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 25 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN 26 * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 27 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 28 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF 29 * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 30 * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 31 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 32 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 33 * 34 * You should have received a copy of the GNU General Public License along 35 * with this program; if not, write to the Free Software Foundation, Inc., 36 * 675 Mass Ave, Cambridge, MA 02139, USA. 37 */ 38 39 #include <linux/init.h> 40 #include <linux/module.h> 41 #include <linux/sched.h> 42 #include <linux/interrupt.h> 43 44 #include <mach/hardware.h> 45 #include <asm/irq.h> 46 #include <asm/mach/irq.h> 47 #include <mach/gpio.h> 48 #include <mach/cpu.h> 49 50 #include <asm/io.h> 51 52 #define IRQ_BANK(irq) ((irq) >> 5) 53 #define IRQ_BIT(irq) ((irq) & 0x1f) 54 55 struct omap_irq_bank { 56 unsigned long base_reg; 57 unsigned long trigger_map; 58 unsigned long wake_enable; 59 }; 60 61 static unsigned int irq_bank_count; 62 static struct omap_irq_bank *irq_banks; 63 64 static inline unsigned int irq_bank_readl(int bank, int offset) 65 { 66 return omap_readl(irq_banks[bank].base_reg + offset); 67 } 68 69 static inline void irq_bank_writel(unsigned long value, int bank, int offset) 70 { 71 omap_writel(value, irq_banks[bank].base_reg + offset); 72 } 73 74 static void omap_ack_irq(unsigned int irq) 75 { 76 if (irq > 31) 77 omap_writel(0x1, OMAP_IH2_BASE + IRQ_CONTROL_REG_OFFSET); 78 79 omap_writel(0x1, OMAP_IH1_BASE + IRQ_CONTROL_REG_OFFSET); 80 } 81 82 static void omap_mask_irq(unsigned int irq) 83 { 84 int bank = IRQ_BANK(irq); 85 u32 l; 86 87 l = omap_readl(irq_banks[bank].base_reg + IRQ_MIR_REG_OFFSET); 88 l |= 1 << IRQ_BIT(irq); 89 omap_writel(l, irq_banks[bank].base_reg + IRQ_MIR_REG_OFFSET); 90 } 91 92 static void omap_unmask_irq(unsigned int irq) 93 { 94 int bank = IRQ_BANK(irq); 95 u32 l; 96 97 l = omap_readl(irq_banks[bank].base_reg + IRQ_MIR_REG_OFFSET); 98 l &= ~(1 << IRQ_BIT(irq)); 99 omap_writel(l, irq_banks[bank].base_reg + IRQ_MIR_REG_OFFSET); 100 } 101 102 static void omap_mask_ack_irq(unsigned int irq) 103 { 104 omap_mask_irq(irq); 105 omap_ack_irq(irq); 106 } 107 108 static int omap_wake_irq(unsigned int irq, unsigned int enable) 109 { 110 int bank = IRQ_BANK(irq); 111 112 if (enable) 113 irq_banks[bank].wake_enable |= IRQ_BIT(irq); 114 else 115 irq_banks[bank].wake_enable &= ~IRQ_BIT(irq); 116 117 return 0; 118 } 119 120 121 /* 122 * Allows tuning the IRQ type and priority 123 * 124 * NOTE: There is currently no OMAP fiq handler for Linux. Read the 125 * mailing list threads on FIQ handlers if you are planning to 126 * add a FIQ handler for OMAP. 127 */ 128 static void omap_irq_set_cfg(int irq, int fiq, int priority, int trigger) 129 { 130 signed int bank; 131 unsigned long val, offset; 132 133 bank = IRQ_BANK(irq); 134 /* FIQ is only available on bank 0 interrupts */ 135 fiq = bank ? 0 : (fiq & 0x1); 136 val = fiq | ((priority & 0x1f) << 2) | ((trigger & 0x1) << 1); 137 offset = IRQ_ILR0_REG_OFFSET + IRQ_BIT(irq) * 0x4; 138 irq_bank_writel(val, bank, offset); 139 } 140 141 #ifdef CONFIG_ARCH_OMAP730 142 static struct omap_irq_bank omap730_irq_banks[] = { 143 { .base_reg = OMAP_IH1_BASE, .trigger_map = 0xb3f8e22f }, 144 { .base_reg = OMAP_IH2_BASE, .trigger_map = 0xfdb9c1f2 }, 145 { .base_reg = OMAP_IH2_BASE + 0x100, .trigger_map = 0x800040f3 }, 146 }; 147 #endif 148 149 #ifdef CONFIG_ARCH_OMAP15XX 150 static struct omap_irq_bank omap1510_irq_banks[] = { 151 { .base_reg = OMAP_IH1_BASE, .trigger_map = 0xb3febfff }, 152 { .base_reg = OMAP_IH2_BASE, .trigger_map = 0xffbfffed }, 153 }; 154 static struct omap_irq_bank omap310_irq_banks[] = { 155 { .base_reg = OMAP_IH1_BASE, .trigger_map = 0xb3faefc3 }, 156 { .base_reg = OMAP_IH2_BASE, .trigger_map = 0x65b3c061 }, 157 }; 158 #endif 159 160 #if defined(CONFIG_ARCH_OMAP16XX) 161 162 static struct omap_irq_bank omap1610_irq_banks[] = { 163 { .base_reg = OMAP_IH1_BASE, .trigger_map = 0xb3fefe8f }, 164 { .base_reg = OMAP_IH2_BASE, .trigger_map = 0xfdb7c1fd }, 165 { .base_reg = OMAP_IH2_BASE + 0x100, .trigger_map = 0xffffb7ff }, 166 { .base_reg = OMAP_IH2_BASE + 0x200, .trigger_map = 0xffffffff }, 167 }; 168 #endif 169 170 static struct irq_chip omap_irq_chip = { 171 .name = "MPU", 172 .ack = omap_mask_ack_irq, 173 .mask = omap_mask_irq, 174 .unmask = omap_unmask_irq, 175 .set_wake = omap_wake_irq, 176 }; 177 178 void __init omap_init_irq(void) 179 { 180 int i, j; 181 182 #ifdef CONFIG_ARCH_OMAP730 183 if (cpu_is_omap730()) { 184 irq_banks = omap730_irq_banks; 185 irq_bank_count = ARRAY_SIZE(omap730_irq_banks); 186 } 187 #endif 188 #ifdef CONFIG_ARCH_OMAP15XX 189 if (cpu_is_omap1510()) { 190 irq_banks = omap1510_irq_banks; 191 irq_bank_count = ARRAY_SIZE(omap1510_irq_banks); 192 } 193 if (cpu_is_omap310()) { 194 irq_banks = omap310_irq_banks; 195 irq_bank_count = ARRAY_SIZE(omap310_irq_banks); 196 } 197 #endif 198 #if defined(CONFIG_ARCH_OMAP16XX) 199 if (cpu_is_omap16xx()) { 200 irq_banks = omap1610_irq_banks; 201 irq_bank_count = ARRAY_SIZE(omap1610_irq_banks); 202 } 203 #endif 204 printk("Total of %i interrupts in %i interrupt banks\n", 205 irq_bank_count * 32, irq_bank_count); 206 207 /* Mask and clear all interrupts */ 208 for (i = 0; i < irq_bank_count; i++) { 209 irq_bank_writel(~0x0, i, IRQ_MIR_REG_OFFSET); 210 irq_bank_writel(0x0, i, IRQ_ITR_REG_OFFSET); 211 } 212 213 /* Clear any pending interrupts */ 214 irq_bank_writel(0x03, 0, IRQ_CONTROL_REG_OFFSET); 215 irq_bank_writel(0x03, 1, IRQ_CONTROL_REG_OFFSET); 216 217 /* Enable interrupts in global mask */ 218 if (cpu_is_omap730()) { 219 irq_bank_writel(0x0, 0, IRQ_GMR_REG_OFFSET); 220 } 221 222 /* Install the interrupt handlers for each bank */ 223 for (i = 0; i < irq_bank_count; i++) { 224 for (j = i * 32; j < (i + 1) * 32; j++) { 225 int irq_trigger; 226 227 irq_trigger = irq_banks[i].trigger_map >> IRQ_BIT(j); 228 omap_irq_set_cfg(j, 0, 0, irq_trigger); 229 230 set_irq_chip(j, &omap_irq_chip); 231 set_irq_handler(j, handle_level_irq); 232 set_irq_flags(j, IRQF_VALID); 233 } 234 } 235 236 /* Unmask level 2 handler */ 237 238 if (cpu_is_omap730()) 239 omap_unmask_irq(INT_730_IH2_IRQ); 240 else if (cpu_is_omap15xx()) 241 omap_unmask_irq(INT_1510_IH2_IRQ); 242 else if (cpu_is_omap16xx()) 243 omap_unmask_irq(INT_1610_IH2_IRQ); 244 } 245