1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * linux/arch/arm/mach-omap1/devices.c 4 * 5 * OMAP1 platform device setup/initialization 6 */ 7 8 #include <linux/dma-mapping.h> 9 #include <linux/gpio.h> 10 #include <linux/module.h> 11 #include <linux/kernel.h> 12 #include <linux/init.h> 13 #include <linux/platform_device.h> 14 #include <linux/spi/spi.h> 15 16 #include <linux/platform_data/omap-wd-timer.h> 17 18 #include <asm/mach/map.h> 19 20 #include <mach/tc.h> 21 #include <mach/mux.h> 22 23 #include <mach/omap7xx.h> 24 #include <mach/hardware.h> 25 26 #include "common.h" 27 #include "clock.h" 28 #include "mmc.h" 29 #include "sram.h" 30 31 #if IS_ENABLED(CONFIG_RTC_DRV_OMAP) 32 33 #define OMAP_RTC_BASE 0xfffb4800 34 35 static struct resource rtc_resources[] = { 36 { 37 .start = OMAP_RTC_BASE, 38 .end = OMAP_RTC_BASE + 0x5f, 39 .flags = IORESOURCE_MEM, 40 }, 41 { 42 .start = INT_RTC_TIMER, 43 .flags = IORESOURCE_IRQ, 44 }, 45 { 46 .start = INT_RTC_ALARM, 47 .flags = IORESOURCE_IRQ, 48 }, 49 }; 50 51 static struct platform_device omap_rtc_device = { 52 .name = "omap_rtc", 53 .id = -1, 54 .num_resources = ARRAY_SIZE(rtc_resources), 55 .resource = rtc_resources, 56 }; 57 58 static void omap_init_rtc(void) 59 { 60 (void) platform_device_register(&omap_rtc_device); 61 } 62 #else 63 static inline void omap_init_rtc(void) {} 64 #endif 65 66 static inline void omap_init_mbox(void) { } 67 68 /*-------------------------------------------------------------------------*/ 69 70 #if IS_ENABLED(CONFIG_MMC_OMAP) 71 72 static inline void omap1_mmc_mux(struct omap_mmc_platform_data *mmc_controller, 73 int controller_nr) 74 { 75 if (controller_nr == 0) { 76 if (cpu_is_omap7xx()) { 77 omap_cfg_reg(MMC_7XX_CMD); 78 omap_cfg_reg(MMC_7XX_CLK); 79 omap_cfg_reg(MMC_7XX_DAT0); 80 } else { 81 omap_cfg_reg(MMC_CMD); 82 omap_cfg_reg(MMC_CLK); 83 omap_cfg_reg(MMC_DAT0); 84 } 85 86 if (cpu_is_omap1710()) { 87 omap_cfg_reg(M15_1710_MMC_CLKI); 88 omap_cfg_reg(P19_1710_MMC_CMDDIR); 89 omap_cfg_reg(P20_1710_MMC_DATDIR0); 90 } 91 if (mmc_controller->slots[0].wires == 4 && !cpu_is_omap7xx()) { 92 omap_cfg_reg(MMC_DAT1); 93 /* NOTE: DAT2 can be on W10 (here) or M15 */ 94 if (!mmc_controller->slots[0].nomux) 95 omap_cfg_reg(MMC_DAT2); 96 omap_cfg_reg(MMC_DAT3); 97 } 98 } 99 100 /* Block 2 is on newer chips, and has many pinout options */ 101 if (cpu_is_omap16xx() && controller_nr == 1) { 102 if (!mmc_controller->slots[1].nomux) { 103 omap_cfg_reg(Y8_1610_MMC2_CMD); 104 omap_cfg_reg(Y10_1610_MMC2_CLK); 105 omap_cfg_reg(R18_1610_MMC2_CLKIN); 106 omap_cfg_reg(W8_1610_MMC2_DAT0); 107 if (mmc_controller->slots[1].wires == 4) { 108 omap_cfg_reg(V8_1610_MMC2_DAT1); 109 omap_cfg_reg(W15_1610_MMC2_DAT2); 110 omap_cfg_reg(R10_1610_MMC2_DAT3); 111 } 112 113 /* These are needed for the level shifter */ 114 omap_cfg_reg(V9_1610_MMC2_CMDDIR); 115 omap_cfg_reg(V5_1610_MMC2_DATDIR0); 116 omap_cfg_reg(W19_1610_MMC2_DATDIR1); 117 } 118 119 /* Feedback clock must be set on OMAP-1710 MMC2 */ 120 if (cpu_is_omap1710()) 121 omap_writel(omap_readl(MOD_CONF_CTRL_1) | (1 << 24), 122 MOD_CONF_CTRL_1); 123 } 124 } 125 126 #define OMAP_MMC_NR_RES 4 127 128 /* 129 * Register MMC devices. 130 */ 131 static int __init omap_mmc_add(const char *name, int id, unsigned long base, 132 unsigned long size, unsigned int irq, 133 unsigned rx_req, unsigned tx_req, 134 struct omap_mmc_platform_data *data) 135 { 136 struct platform_device *pdev; 137 struct resource res[OMAP_MMC_NR_RES]; 138 int ret; 139 140 pdev = platform_device_alloc(name, id); 141 if (!pdev) 142 return -ENOMEM; 143 144 memset(res, 0, OMAP_MMC_NR_RES * sizeof(struct resource)); 145 res[0].start = base; 146 res[0].end = base + size - 1; 147 res[0].flags = IORESOURCE_MEM; 148 res[1].start = res[1].end = irq; 149 res[1].flags = IORESOURCE_IRQ; 150 res[2].start = rx_req; 151 res[2].name = "rx"; 152 res[2].flags = IORESOURCE_DMA; 153 res[3].start = tx_req; 154 res[3].name = "tx"; 155 res[3].flags = IORESOURCE_DMA; 156 157 if (cpu_is_omap7xx()) 158 data->slots[0].features = MMC_OMAP7XX; 159 if (cpu_is_omap15xx()) 160 data->slots[0].features = MMC_OMAP15XX; 161 if (cpu_is_omap16xx()) 162 data->slots[0].features = MMC_OMAP16XX; 163 164 ret = platform_device_add_resources(pdev, res, ARRAY_SIZE(res)); 165 if (ret == 0) 166 ret = platform_device_add_data(pdev, data, sizeof(*data)); 167 if (ret) 168 goto fail; 169 170 ret = platform_device_add(pdev); 171 if (ret) 172 goto fail; 173 174 /* return device handle to board setup code */ 175 data->dev = &pdev->dev; 176 return 0; 177 178 fail: 179 platform_device_put(pdev); 180 return ret; 181 } 182 183 void __init omap1_init_mmc(struct omap_mmc_platform_data **mmc_data, 184 int nr_controllers) 185 { 186 int i; 187 188 for (i = 0; i < nr_controllers; i++) { 189 unsigned long base, size; 190 unsigned rx_req, tx_req; 191 unsigned int irq = 0; 192 193 if (!mmc_data[i]) 194 continue; 195 196 omap1_mmc_mux(mmc_data[i], i); 197 198 switch (i) { 199 case 0: 200 base = OMAP1_MMC1_BASE; 201 irq = INT_MMC; 202 rx_req = 22; 203 tx_req = 21; 204 break; 205 case 1: 206 if (!cpu_is_omap16xx()) 207 return; 208 base = OMAP1_MMC2_BASE; 209 irq = INT_1610_MMC2; 210 rx_req = 55; 211 tx_req = 54; 212 break; 213 default: 214 continue; 215 } 216 size = OMAP1_MMC_SIZE; 217 218 omap_mmc_add("mmci-omap", i, base, size, irq, 219 rx_req, tx_req, mmc_data[i]); 220 } 221 } 222 223 #endif 224 225 /*-------------------------------------------------------------------------*/ 226 227 /* OMAP7xx SPI support */ 228 #if IS_ENABLED(CONFIG_SPI_OMAP_100K) 229 230 struct platform_device omap_spi1 = { 231 .name = "omap1_spi100k", 232 .id = 1, 233 }; 234 235 struct platform_device omap_spi2 = { 236 .name = "omap1_spi100k", 237 .id = 2, 238 }; 239 240 static void omap_init_spi100k(void) 241 { 242 if (!cpu_is_omap7xx()) 243 return; 244 245 omap_spi1.dev.platform_data = ioremap(OMAP7XX_SPI1_BASE, 0x7ff); 246 if (omap_spi1.dev.platform_data) 247 platform_device_register(&omap_spi1); 248 249 omap_spi2.dev.platform_data = ioremap(OMAP7XX_SPI2_BASE, 0x7ff); 250 if (omap_spi2.dev.platform_data) 251 platform_device_register(&omap_spi2); 252 } 253 254 #else 255 static inline void omap_init_spi100k(void) 256 { 257 } 258 #endif 259 260 /*-------------------------------------------------------------------------*/ 261 262 static inline void omap_init_sti(void) {} 263 264 /* Numbering for the SPI-capable controllers when used for SPI: 265 * spi = 1 266 * uwire = 2 267 * mmc1..2 = 3..4 268 * mcbsp1..3 = 5..7 269 */ 270 271 #if IS_ENABLED(CONFIG_SPI_OMAP_UWIRE) 272 273 #define OMAP_UWIRE_BASE 0xfffb3000 274 275 static struct resource uwire_resources[] = { 276 { 277 .start = OMAP_UWIRE_BASE, 278 .end = OMAP_UWIRE_BASE + 0x20, 279 .flags = IORESOURCE_MEM, 280 }, 281 }; 282 283 static struct platform_device omap_uwire_device = { 284 .name = "omap_uwire", 285 .id = -1, 286 .num_resources = ARRAY_SIZE(uwire_resources), 287 .resource = uwire_resources, 288 }; 289 290 static void omap_init_uwire(void) 291 { 292 /* FIXME define and use a boot tag; not all boards will be hooking 293 * up devices to the microwire controller, and multi-board configs 294 * mean that CONFIG_SPI_OMAP_UWIRE may be configured anyway... 295 */ 296 297 /* board-specific code must configure chipselects (only a few 298 * are normally used) and SCLK/SDI/SDO (each has two choices). 299 */ 300 (void) platform_device_register(&omap_uwire_device); 301 } 302 #else 303 static inline void omap_init_uwire(void) {} 304 #endif 305 306 307 #define OMAP1_RNG_BASE 0xfffe5000 308 309 static struct resource omap1_rng_resources[] = { 310 { 311 .start = OMAP1_RNG_BASE, 312 .end = OMAP1_RNG_BASE + 0x4f, 313 .flags = IORESOURCE_MEM, 314 }, 315 }; 316 317 static struct platform_device omap1_rng_device = { 318 .name = "omap_rng", 319 .id = -1, 320 .num_resources = ARRAY_SIZE(omap1_rng_resources), 321 .resource = omap1_rng_resources, 322 }; 323 324 static void omap1_init_rng(void) 325 { 326 if (!cpu_is_omap16xx()) 327 return; 328 329 (void) platform_device_register(&omap1_rng_device); 330 } 331 332 /*-------------------------------------------------------------------------*/ 333 334 /* 335 * This gets called after board-specific INIT_MACHINE, and initializes most 336 * on-chip peripherals accessible on this board (except for few like USB): 337 * 338 * (a) Does any "standard config" pin muxing needed. Board-specific 339 * code will have muxed GPIO pins and done "nonstandard" setup; 340 * that code could live in the boot loader. 341 * (b) Populating board-specific platform_data with the data drivers 342 * rely on to handle wiring variations. 343 * (c) Creating platform devices as meaningful on this board and 344 * with this kernel configuration. 345 * 346 * Claiming GPIOs, and setting their direction and initial values, is the 347 * responsibility of the device drivers. So is responding to probe(). 348 * 349 * Board-specific knowledge like creating devices or pin setup is to be 350 * kept out of drivers as much as possible. In particular, pin setup 351 * may be handled by the boot loader, and drivers should expect it will 352 * normally have been done by the time they're probed. 353 */ 354 static int __init omap1_init_devices(void) 355 { 356 if (!cpu_class_is_omap1()) 357 return -ENODEV; 358 359 omap_sram_init(); 360 omap1_clk_late_init(); 361 362 /* please keep these calls, and their implementations above, 363 * in alphabetical order so they're easier to sort through. 364 */ 365 366 omap_init_mbox(); 367 omap_init_rtc(); 368 omap_init_spi100k(); 369 omap_init_sti(); 370 omap_init_uwire(); 371 omap1_init_rng(); 372 373 return 0; 374 } 375 arch_initcall(omap1_init_devices); 376 377 #if IS_ENABLED(CONFIG_OMAP_WATCHDOG) 378 379 static struct resource wdt_resources[] = { 380 { 381 .start = 0xfffeb000, 382 .end = 0xfffeb07F, 383 .flags = IORESOURCE_MEM, 384 }, 385 }; 386 387 static struct platform_device omap_wdt_device = { 388 .name = "omap_wdt", 389 .id = -1, 390 .num_resources = ARRAY_SIZE(wdt_resources), 391 .resource = wdt_resources, 392 }; 393 394 static int __init omap_init_wdt(void) 395 { 396 struct omap_wd_timer_platform_data pdata; 397 int ret; 398 399 if (!cpu_is_omap16xx()) 400 return -ENODEV; 401 402 pdata.read_reset_sources = omap1_get_reset_sources; 403 404 ret = platform_device_register(&omap_wdt_device); 405 if (!ret) { 406 ret = platform_device_add_data(&omap_wdt_device, &pdata, 407 sizeof(pdata)); 408 if (ret) 409 platform_device_del(&omap_wdt_device); 410 } 411 412 return ret; 413 } 414 subsys_initcall(omap_init_wdt); 415 #endif 416