1/* SPDX-License-Identifier: GPL-2.0-only */
2/*
3 *  linux/arch/arm/mach-omap1/ams-delta-fiq-handler.S
4 *
5 *  Based on  linux/arch/arm/lib/floppydma.S
6 *  Renamed and modified to work with 2.6 kernel by Matt Callow
7 *  Copyright (C) 1995, 1996 Russell King
8 *  Copyright (C) 2004 Pete Trapps
9 *  Copyright (C) 2006 Matt Callow
10 *  Copyright (C) 2010 Janusz Krzysztofik
11 */
12
13#include <linux/linkage.h>
14#include <linux/platform_data/ams-delta-fiq.h>
15#include <linux/platform_data/gpio-omap.h>
16
17#include <asm/assembler.h>
18#include <asm/irq.h>
19
20#include "ams-delta-fiq.h"
21#include "board-ams-delta.h"
22#include "iomap.h"
23#include "soc.h"
24
25/*
26 * OMAP1510 GPIO related symbol copied from arch/arm/mach-omap1/gpio15xx.c.
27 * Unfortunately, it was not placed in a separate header file.
28 */
29#define OMAP1510_GPIO_BASE		0xFFFCE000
30
31/* GPIO register bitmasks */
32#define KEYBRD_DATA_MASK		(0x1 << AMS_DELTA_GPIO_PIN_KEYBRD_DATA)
33#define KEYBRD_CLK_MASK			(0x1 << AMS_DELTA_GPIO_PIN_KEYBRD_CLK)
34#define MODEM_IRQ_MASK			(0x1 << AMS_DELTA_GPIO_PIN_MODEM_IRQ)
35#define HOOK_SWITCH_MASK		(0x1 << AMS_DELTA_GPIO_PIN_HOOK_SWITCH)
36#define OTHERS_MASK			(MODEM_IRQ_MASK | HOOK_SWITCH_MASK)
37
38/* IRQ handler register bitmasks */
39#define DEFERRED_FIQ_MASK		OMAP_IRQ_BIT(INT_DEFERRED_FIQ)
40#define GPIO_BANK1_MASK  		OMAP_IRQ_BIT(INT_GPIO_BANK1)
41
42/* Driver buffer byte offsets */
43#define BUF_MASK			(FIQ_MASK * 4)
44#define BUF_STATE			(FIQ_STATE * 4)
45#define BUF_KEYS_CNT			(FIQ_KEYS_CNT * 4)
46#define BUF_TAIL_OFFSET			(FIQ_TAIL_OFFSET * 4)
47#define BUF_HEAD_OFFSET			(FIQ_HEAD_OFFSET * 4)
48#define BUF_BUF_LEN			(FIQ_BUF_LEN * 4)
49#define BUF_KEY				(FIQ_KEY * 4)
50#define BUF_MISSED_KEYS			(FIQ_MISSED_KEYS * 4)
51#define BUF_BUFFER_START		(FIQ_BUFFER_START * 4)
52#define BUF_GPIO_INT_MASK		(FIQ_GPIO_INT_MASK * 4)
53#define BUF_KEYS_HICNT			(FIQ_KEYS_HICNT * 4)
54#define BUF_IRQ_PEND			(FIQ_IRQ_PEND * 4)
55#define BUF_SIR_CODE_L1			(FIQ_SIR_CODE_L1 * 4)
56#define BUF_SIR_CODE_L2			(IRQ_SIR_CODE_L2 * 4)
57#define BUF_CNT_INT_00			(FIQ_CNT_INT_00 * 4)
58#define BUF_CNT_INT_KEY			(FIQ_CNT_INT_KEY * 4)
59#define BUF_CNT_INT_MDM			(FIQ_CNT_INT_MDM * 4)
60#define BUF_CNT_INT_03			(FIQ_CNT_INT_03 * 4)
61#define BUF_CNT_INT_HSW			(FIQ_CNT_INT_HSW * 4)
62#define BUF_CNT_INT_05			(FIQ_CNT_INT_05 * 4)
63#define BUF_CNT_INT_06			(FIQ_CNT_INT_06 * 4)
64#define BUF_CNT_INT_07			(FIQ_CNT_INT_07 * 4)
65#define BUF_CNT_INT_08			(FIQ_CNT_INT_08 * 4)
66#define BUF_CNT_INT_09			(FIQ_CNT_INT_09 * 4)
67#define BUF_CNT_INT_10			(FIQ_CNT_INT_10 * 4)
68#define BUF_CNT_INT_11			(FIQ_CNT_INT_11 * 4)
69#define BUF_CNT_INT_12			(FIQ_CNT_INT_12 * 4)
70#define BUF_CNT_INT_13			(FIQ_CNT_INT_13 * 4)
71#define BUF_CNT_INT_14			(FIQ_CNT_INT_14 * 4)
72#define BUF_CNT_INT_15			(FIQ_CNT_INT_15 * 4)
73#define BUF_CIRC_BUFF			(FIQ_CIRC_BUFF * 4)
74
75
76/*
77 * Register usage
78 * r8  - temporary
79 * r9  - the driver buffer
80 * r10 - temporary
81 * r11 - interrupts mask
82 * r12 - base pointers
83 * r13 - interrupts status
84 */
85
86	.text
87
88	.global qwerty_fiqin_end
89
90ENTRY(qwerty_fiqin_start)
91	@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
92	@ FIQ intrrupt handler
93	ldr r12, omap_ih1_base			@ set pointer to level1 handler
94
95	ldr r11, [r12, #IRQ_MIR_REG_OFFSET]	@ fetch interrupts mask
96
97	ldr r13, [r12, #IRQ_ITR_REG_OFFSET]	@ fetch interrupts status
98	bics r13, r13, r11			@ clear masked - any left?
99	beq exit				@ none - spurious FIQ? exit
100
101	ldr r10, [r12, #IRQ_SIR_FIQ_REG_OFFSET]	@ get requested interrupt number
102
103	mov r8, #2				@ reset FIQ agreement
104	str r8, [r12, #IRQ_CONTROL_REG_OFFSET]
105
106	cmp r10, #(INT_GPIO_BANK1 - NR_IRQS_LEGACY)	@ is it GPIO interrupt?
107	beq gpio				@ yes - process it
108
109	mov r8, #1
110	orr r8, r11, r8, lsl r10		@ mask spurious interrupt
111	str r8, [r12, #IRQ_MIR_REG_OFFSET]
112exit:
113	subs	pc, lr, #4			@ return from FIQ
114	@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
115
116
117	@@@@@@@@@@@@@@@@@@@@@@@@@@@
118gpio:	@ GPIO bank interrupt handler
119	ldr r12, omap1510_gpio_base		@ set base pointer to GPIO bank
120
121	ldr r11, [r12, #OMAP1510_GPIO_INT_MASK]	@ fetch GPIO interrupts mask
122restart:
123	ldr r13, [r12, #OMAP1510_GPIO_INT_STATUS]	@ fetch status bits
124	bics r13, r13, r11			@ clear masked - any left?
125	beq exit				@ no - spurious interrupt? exit
126
127	orr r11, r11, r13			@ mask all requested interrupts
128	str r11, [r12, #OMAP1510_GPIO_INT_MASK]
129
130	str r13, [r12, #OMAP1510_GPIO_INT_STATUS] @ ack all requested interrupts
131
132	ands r10, r13, #KEYBRD_CLK_MASK		@ extract keyboard status - set?
133	beq hksw				@ no - try next source
134
135
136	@@@@@@@@@@@@@@@@@@@@@@
137	@ Keyboard clock FIQ mode interrupt handler
138	@ r10 now contains KEYBRD_CLK_MASK, use it
139	bic r11, r11, r10				@ unmask it
140	str r11, [r12, #OMAP1510_GPIO_INT_MASK]
141
142	@ Process keyboard data
143	ldr r8, [r12, #OMAP1510_GPIO_DATA_INPUT]	@ fetch GPIO input
144
145	ldr r10, [r9, #BUF_STATE]		@ fetch kbd interface state
146	cmp r10, #0				@ are we expecting start bit?
147	bne data				@ no - go to data processing
148
149	ands r8, r8, #KEYBRD_DATA_MASK		@ check start bit - detected?
150	beq hksw				@ no - try next source
151
152	@ r8 contains KEYBRD_DATA_MASK, use it
153	str r8, [r9, #BUF_STATE]		@ enter data processing state
154	@ r10 already contains 0, reuse it
155	str r10, [r9, #BUF_KEY]			@ clear keycode
156	mov r10, #2				@ reset input bit mask
157	str r10, [r9, #BUF_MASK]
158
159	@ Mask other GPIO line interrupts till key done
160	str r11, [r9, #BUF_GPIO_INT_MASK]	@ save mask for later restore
161	mvn r11, #KEYBRD_CLK_MASK		@ prepare all except kbd mask
162	str r11, [r12, #OMAP1510_GPIO_INT_MASK]	@ store into the mask register
163
164	b restart				@ restart
165
166data:	ldr r10, [r9, #BUF_MASK]		@ fetch current input bit mask
167
168	@ r8 still contains GPIO input bits
169	ands r8, r8, #KEYBRD_DATA_MASK		@ is keyboard data line low?
170	ldreq r8, [r9, #BUF_KEY]		@ yes - fetch collected so far,
171	orreq r8, r8, r10			@ set 1 at current mask position
172	streq r8, [r9, #BUF_KEY]		@ and save back
173
174	mov r10, r10, lsl #1			@ shift mask left
175	bics r10, r10, #0x800			@ have we got all the bits?
176	strne r10, [r9, #BUF_MASK]		@ not yet - store the mask
177	bne restart				@ and restart
178
179	@ r10 already contains 0, reuse it
180	str r10, [r9, #BUF_STATE]		@ reset state to start
181
182	@ Key done - restore interrupt mask
183	ldr r10, [r9, #BUF_GPIO_INT_MASK]	@ fetch saved mask
184	and r11, r11, r10			@ unmask all saved as unmasked
185	str r11, [r12, #OMAP1510_GPIO_INT_MASK]	@ restore into the mask register
186
187	@ Try appending the keycode to the circular buffer
188	ldr r10, [r9, #BUF_KEYS_CNT]		@ get saved keystrokes count
189	ldr r8, [r9, #BUF_BUF_LEN]		@ get buffer size
190	cmp r10, r8				@ is buffer full?
191	beq hksw				@ yes - key lost, next source
192
193	add r10, r10, #1			@ incremet keystrokes counter
194	str r10, [r9, #BUF_KEYS_CNT]
195
196	ldr r10, [r9, #BUF_TAIL_OFFSET]		@ get buffer tail offset
197	@ r8 already contains buffer size
198	cmp r10, r8				@ end of buffer?
199	moveq r10, #0				@ yes - rewind to buffer start
200
201	ldr r12, [r9, #BUF_BUFFER_START]	@ get buffer start address
202	add r12, r12, r10, LSL #2		@ calculate buffer tail address
203	ldr r8, [r9, #BUF_KEY]			@ get last keycode
204	str r8, [r12]				@ append it to the buffer tail
205
206	add r10, r10, #1			@ increment buffer tail offset
207	str r10, [r9, #BUF_TAIL_OFFSET]
208
209	ldr r10, [r9, #BUF_CNT_INT_KEY]		@ increment interrupts counter
210	add r10, r10, #1
211	str r10, [r9, #BUF_CNT_INT_KEY]
212	@@@@@@@@@@@@@@@@@@@@@@@@
213
214
215hksw:	@Is hook switch interrupt requested?
216	tst r13, #HOOK_SWITCH_MASK 		@ is hook switch status bit set?
217	beq mdm					@ no - try next source
218
219
220	@@@@@@@@@@@@@@@@@@@@@@@@
221	@ Hook switch interrupt FIQ mode simple handler
222
223	@ Don't toggle active edge, the switch always bounces
224
225	@ Increment hook switch interrupt counter
226	ldr r10, [r9, #BUF_CNT_INT_HSW]
227	add r10, r10, #1
228	str r10, [r9, #BUF_CNT_INT_HSW]
229	@@@@@@@@@@@@@@@@@@@@@@@@
230
231
232mdm:	@Is it a modem interrupt?
233	tst r13, #MODEM_IRQ_MASK 		@ is modem status bit set?
234	beq irq					@ no - check for next interrupt
235
236
237	@@@@@@@@@@@@@@@@@@@@@@@@
238	@ Modem FIQ mode interrupt handler stub
239
240	@ Increment modem interrupt counter
241	ldr r10, [r9, #BUF_CNT_INT_MDM]
242	add r10, r10, #1
243	str r10, [r9, #BUF_CNT_INT_MDM]
244	@@@@@@@@@@@@@@@@@@@@@@@@
245
246
247irq:	@ Place deferred_fiq interrupt request
248	ldr r12, deferred_fiq_ih_base		@ set pointer to IRQ handler
249	mov r10, #DEFERRED_FIQ_MASK		@ set deferred_fiq bit
250	str r10, [r12, #IRQ_ISR_REG_OFFSET] 	@ place it in the ISR register
251
252	ldr r12, omap1510_gpio_base		@ set pointer back to GPIO bank
253	b restart				@ check for next GPIO interrupt
254	@@@@@@@@@@@@@@@@@@@@@@@@@@@
255
256
257/*
258 * Virtual addresses for IO
259 */
260omap_ih1_base:
261	.word OMAP1_IO_ADDRESS(OMAP_IH1_BASE)
262deferred_fiq_ih_base:
263	.word OMAP1_IO_ADDRESS(DEFERRED_FIQ_IH_BASE)
264omap1510_gpio_base:
265	.word OMAP1_IO_ADDRESS(OMAP1510_GPIO_BASE)
266qwerty_fiqin_end:
267
268/*
269 * Check the size of the FIQ,
270 * it cannot go beyond 0xffff0200, and is copied to 0xffff001c
271 */
272.if (qwerty_fiqin_end - qwerty_fiqin_start) > (0x200 - 0x1c)
273	.err
274.endif
275