1/* SPDX-License-Identifier: GPL-2.0-only */ 2/* 3 * linux/arch/arm/mach-omap1/ams-delta-fiq-handler.S 4 * 5 * Based on linux/arch/arm/lib/floppydma.S 6 * Renamed and modified to work with 2.6 kernel by Matt Callow 7 * Copyright (C) 1995, 1996 Russell King 8 * Copyright (C) 2004 Pete Trapps 9 * Copyright (C) 2006 Matt Callow 10 * Copyright (C) 2010 Janusz Krzysztofik 11 */ 12 13#include <linux/linkage.h> 14#include <linux/platform_data/ams-delta-fiq.h> 15#include <linux/platform_data/gpio-omap.h> 16 17#include <asm/assembler.h> 18 19#include "ams-delta-fiq.h" 20#include "board-ams-delta.h" 21#include "iomap.h" 22#include "soc.h" 23 24/* 25 * OMAP1510 GPIO related symbol copied from arch/arm/mach-omap1/gpio15xx.c. 26 * Unfortunately, it was not placed in a separate header file. 27 */ 28#define OMAP1510_GPIO_BASE 0xFFFCE000 29 30/* GPIO register bitmasks */ 31#define KEYBRD_DATA_MASK (0x1 << AMS_DELTA_GPIO_PIN_KEYBRD_DATA) 32#define KEYBRD_CLK_MASK (0x1 << AMS_DELTA_GPIO_PIN_KEYBRD_CLK) 33#define MODEM_IRQ_MASK (0x1 << AMS_DELTA_GPIO_PIN_MODEM_IRQ) 34#define HOOK_SWITCH_MASK (0x1 << AMS_DELTA_GPIO_PIN_HOOK_SWITCH) 35#define OTHERS_MASK (MODEM_IRQ_MASK | HOOK_SWITCH_MASK) 36 37/* IRQ handler register bitmasks */ 38#define DEFERRED_FIQ_MASK OMAP_IRQ_BIT(INT_DEFERRED_FIQ) 39#define GPIO_BANK1_MASK OMAP_IRQ_BIT(INT_GPIO_BANK1) 40 41/* Driver buffer byte offsets */ 42#define BUF_MASK (FIQ_MASK * 4) 43#define BUF_STATE (FIQ_STATE * 4) 44#define BUF_KEYS_CNT (FIQ_KEYS_CNT * 4) 45#define BUF_TAIL_OFFSET (FIQ_TAIL_OFFSET * 4) 46#define BUF_HEAD_OFFSET (FIQ_HEAD_OFFSET * 4) 47#define BUF_BUF_LEN (FIQ_BUF_LEN * 4) 48#define BUF_KEY (FIQ_KEY * 4) 49#define BUF_MISSED_KEYS (FIQ_MISSED_KEYS * 4) 50#define BUF_BUFFER_START (FIQ_BUFFER_START * 4) 51#define BUF_GPIO_INT_MASK (FIQ_GPIO_INT_MASK * 4) 52#define BUF_KEYS_HICNT (FIQ_KEYS_HICNT * 4) 53#define BUF_IRQ_PEND (FIQ_IRQ_PEND * 4) 54#define BUF_SIR_CODE_L1 (FIQ_SIR_CODE_L1 * 4) 55#define BUF_SIR_CODE_L2 (IRQ_SIR_CODE_L2 * 4) 56#define BUF_CNT_INT_00 (FIQ_CNT_INT_00 * 4) 57#define BUF_CNT_INT_KEY (FIQ_CNT_INT_KEY * 4) 58#define BUF_CNT_INT_MDM (FIQ_CNT_INT_MDM * 4) 59#define BUF_CNT_INT_03 (FIQ_CNT_INT_03 * 4) 60#define BUF_CNT_INT_HSW (FIQ_CNT_INT_HSW * 4) 61#define BUF_CNT_INT_05 (FIQ_CNT_INT_05 * 4) 62#define BUF_CNT_INT_06 (FIQ_CNT_INT_06 * 4) 63#define BUF_CNT_INT_07 (FIQ_CNT_INT_07 * 4) 64#define BUF_CNT_INT_08 (FIQ_CNT_INT_08 * 4) 65#define BUF_CNT_INT_09 (FIQ_CNT_INT_09 * 4) 66#define BUF_CNT_INT_10 (FIQ_CNT_INT_10 * 4) 67#define BUF_CNT_INT_11 (FIQ_CNT_INT_11 * 4) 68#define BUF_CNT_INT_12 (FIQ_CNT_INT_12 * 4) 69#define BUF_CNT_INT_13 (FIQ_CNT_INT_13 * 4) 70#define BUF_CNT_INT_14 (FIQ_CNT_INT_14 * 4) 71#define BUF_CNT_INT_15 (FIQ_CNT_INT_15 * 4) 72#define BUF_CIRC_BUFF (FIQ_CIRC_BUFF * 4) 73 74 75/* 76 * Register usage 77 * r8 - temporary 78 * r9 - the driver buffer 79 * r10 - temporary 80 * r11 - interrupts mask 81 * r12 - base pointers 82 * r13 - interrupts status 83 */ 84 85 .text 86 87 .global qwerty_fiqin_end 88 89ENTRY(qwerty_fiqin_start) 90 @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ 91 @ FIQ intrrupt handler 92 ldr r12, omap_ih1_base @ set pointer to level1 handler 93 94 ldr r11, [r12, #IRQ_MIR_REG_OFFSET] @ fetch interrupts mask 95 96 ldr r13, [r12, #IRQ_ITR_REG_OFFSET] @ fetch interrupts status 97 bics r13, r13, r11 @ clear masked - any left? 98 beq exit @ none - spurious FIQ? exit 99 100 ldr r10, [r12, #IRQ_SIR_FIQ_REG_OFFSET] @ get requested interrupt number 101 102 mov r8, #2 @ reset FIQ agreement 103 str r8, [r12, #IRQ_CONTROL_REG_OFFSET] 104 105 cmp r10, #(INT_GPIO_BANK1 - NR_IRQS_LEGACY) @ is it GPIO interrupt? 106 beq gpio @ yes - process it 107 108 mov r8, #1 109 orr r8, r11, r8, lsl r10 @ mask spurious interrupt 110 str r8, [r12, #IRQ_MIR_REG_OFFSET] 111exit: 112 subs pc, lr, #4 @ return from FIQ 113 @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ 114 115 116 @@@@@@@@@@@@@@@@@@@@@@@@@@@ 117gpio: @ GPIO bank interrupt handler 118 ldr r12, omap1510_gpio_base @ set base pointer to GPIO bank 119 120 ldr r11, [r12, #OMAP1510_GPIO_INT_MASK] @ fetch GPIO interrupts mask 121restart: 122 ldr r13, [r12, #OMAP1510_GPIO_INT_STATUS] @ fetch status bits 123 bics r13, r13, r11 @ clear masked - any left? 124 beq exit @ no - spurious interrupt? exit 125 126 orr r11, r11, r13 @ mask all requested interrupts 127 str r11, [r12, #OMAP1510_GPIO_INT_MASK] 128 129 str r13, [r12, #OMAP1510_GPIO_INT_STATUS] @ ack all requested interrupts 130 131 ands r10, r13, #KEYBRD_CLK_MASK @ extract keyboard status - set? 132 beq hksw @ no - try next source 133 134 135 @@@@@@@@@@@@@@@@@@@@@@ 136 @ Keyboard clock FIQ mode interrupt handler 137 @ r10 now contains KEYBRD_CLK_MASK, use it 138 bic r11, r11, r10 @ unmask it 139 str r11, [r12, #OMAP1510_GPIO_INT_MASK] 140 141 @ Process keyboard data 142 ldr r8, [r12, #OMAP1510_GPIO_DATA_INPUT] @ fetch GPIO input 143 144 ldr r10, [r9, #BUF_STATE] @ fetch kbd interface state 145 cmp r10, #0 @ are we expecting start bit? 146 bne data @ no - go to data processing 147 148 ands r8, r8, #KEYBRD_DATA_MASK @ check start bit - detected? 149 beq hksw @ no - try next source 150 151 @ r8 contains KEYBRD_DATA_MASK, use it 152 str r8, [r9, #BUF_STATE] @ enter data processing state 153 @ r10 already contains 0, reuse it 154 str r10, [r9, #BUF_KEY] @ clear keycode 155 mov r10, #2 @ reset input bit mask 156 str r10, [r9, #BUF_MASK] 157 158 @ Mask other GPIO line interrupts till key done 159 str r11, [r9, #BUF_GPIO_INT_MASK] @ save mask for later restore 160 mvn r11, #KEYBRD_CLK_MASK @ prepare all except kbd mask 161 str r11, [r12, #OMAP1510_GPIO_INT_MASK] @ store into the mask register 162 163 b restart @ restart 164 165data: ldr r10, [r9, #BUF_MASK] @ fetch current input bit mask 166 167 @ r8 still contains GPIO input bits 168 ands r8, r8, #KEYBRD_DATA_MASK @ is keyboard data line low? 169 ldreq r8, [r9, #BUF_KEY] @ yes - fetch collected so far, 170 orreq r8, r8, r10 @ set 1 at current mask position 171 streq r8, [r9, #BUF_KEY] @ and save back 172 173 mov r10, r10, lsl #1 @ shift mask left 174 bics r10, r10, #0x800 @ have we got all the bits? 175 strne r10, [r9, #BUF_MASK] @ not yet - store the mask 176 bne restart @ and restart 177 178 @ r10 already contains 0, reuse it 179 str r10, [r9, #BUF_STATE] @ reset state to start 180 181 @ Key done - restore interrupt mask 182 ldr r10, [r9, #BUF_GPIO_INT_MASK] @ fetch saved mask 183 and r11, r11, r10 @ unmask all saved as unmasked 184 str r11, [r12, #OMAP1510_GPIO_INT_MASK] @ restore into the mask register 185 186 @ Try appending the keycode to the circular buffer 187 ldr r10, [r9, #BUF_KEYS_CNT] @ get saved keystrokes count 188 ldr r8, [r9, #BUF_BUF_LEN] @ get buffer size 189 cmp r10, r8 @ is buffer full? 190 beq hksw @ yes - key lost, next source 191 192 add r10, r10, #1 @ incremet keystrokes counter 193 str r10, [r9, #BUF_KEYS_CNT] 194 195 ldr r10, [r9, #BUF_TAIL_OFFSET] @ get buffer tail offset 196 @ r8 already contains buffer size 197 cmp r10, r8 @ end of buffer? 198 moveq r10, #0 @ yes - rewind to buffer start 199 200 ldr r12, [r9, #BUF_BUFFER_START] @ get buffer start address 201 add r12, r12, r10, LSL #2 @ calculate buffer tail address 202 ldr r8, [r9, #BUF_KEY] @ get last keycode 203 str r8, [r12] @ append it to the buffer tail 204 205 add r10, r10, #1 @ increment buffer tail offset 206 str r10, [r9, #BUF_TAIL_OFFSET] 207 208 ldr r10, [r9, #BUF_CNT_INT_KEY] @ increment interrupts counter 209 add r10, r10, #1 210 str r10, [r9, #BUF_CNT_INT_KEY] 211 @@@@@@@@@@@@@@@@@@@@@@@@ 212 213 214hksw: @Is hook switch interrupt requested? 215 tst r13, #HOOK_SWITCH_MASK @ is hook switch status bit set? 216 beq mdm @ no - try next source 217 218 219 @@@@@@@@@@@@@@@@@@@@@@@@ 220 @ Hook switch interrupt FIQ mode simple handler 221 222 @ Don't toggle active edge, the switch always bounces 223 224 @ Increment hook switch interrupt counter 225 ldr r10, [r9, #BUF_CNT_INT_HSW] 226 add r10, r10, #1 227 str r10, [r9, #BUF_CNT_INT_HSW] 228 @@@@@@@@@@@@@@@@@@@@@@@@ 229 230 231mdm: @Is it a modem interrupt? 232 tst r13, #MODEM_IRQ_MASK @ is modem status bit set? 233 beq irq @ no - check for next interrupt 234 235 236 @@@@@@@@@@@@@@@@@@@@@@@@ 237 @ Modem FIQ mode interrupt handler stub 238 239 @ Increment modem interrupt counter 240 ldr r10, [r9, #BUF_CNT_INT_MDM] 241 add r10, r10, #1 242 str r10, [r9, #BUF_CNT_INT_MDM] 243 @@@@@@@@@@@@@@@@@@@@@@@@ 244 245 246irq: @ Place deferred_fiq interrupt request 247 ldr r12, deferred_fiq_ih_base @ set pointer to IRQ handler 248 mov r10, #DEFERRED_FIQ_MASK @ set deferred_fiq bit 249 str r10, [r12, #IRQ_ISR_REG_OFFSET] @ place it in the ISR register 250 251 ldr r12, omap1510_gpio_base @ set pointer back to GPIO bank 252 b restart @ check for next GPIO interrupt 253 @@@@@@@@@@@@@@@@@@@@@@@@@@@ 254 255 256/* 257 * Virtual addresses for IO 258 */ 259omap_ih1_base: 260 .word OMAP1_IO_ADDRESS(OMAP_IH1_BASE) 261deferred_fiq_ih_base: 262 .word OMAP1_IO_ADDRESS(DEFERRED_FIQ_IH_BASE) 263omap1510_gpio_base: 264 .word OMAP1_IO_ADDRESS(OMAP1510_GPIO_BASE) 265qwerty_fiqin_end: 266 267/* 268 * Check the size of the FIQ, 269 * it cannot go beyond 0xffff0200, and is copied to 0xffff001c 270 */ 271.if (qwerty_fiqin_end - qwerty_fiqin_start) > (0x200 - 0x1c) 272 .err 273.endif 274