1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * Board-level suspend/resume support. 4 * 5 * Copyright (C) 2014-2015 Marvell 6 * 7 * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> 8 */ 9 10 #include <linux/delay.h> 11 #include <linux/err.h> 12 #include <linux/gpio/consumer.h> 13 #include <linux/init.h> 14 #include <linux/io.h> 15 #include <linux/of.h> 16 #include <linux/of_address.h> 17 #include <linux/slab.h> 18 #include "common.h" 19 20 #define ARMADA_PIC_NR_GPIOS 3 21 22 static void __iomem *gpio_ctrl; 23 static struct gpio_desc *pic_gpios[ARMADA_PIC_NR_GPIOS]; 24 static int pic_raw_gpios[ARMADA_PIC_NR_GPIOS]; 25 26 static void mvebu_armada_pm_enter(void __iomem *sdram_reg, u32 srcmd) 27 { 28 u32 reg, ackcmd; 29 int i; 30 31 /* Put 001 as value on the GPIOs */ 32 reg = readl(gpio_ctrl); 33 for (i = 0; i < ARMADA_PIC_NR_GPIOS; i++) 34 reg &= ~BIT(pic_raw_gpios[i]); 35 reg |= BIT(pic_raw_gpios[0]); 36 writel(reg, gpio_ctrl); 37 38 /* Prepare writing 111 to the GPIOs */ 39 ackcmd = readl(gpio_ctrl); 40 for (i = 0; i < ARMADA_PIC_NR_GPIOS; i++) 41 ackcmd |= BIT(pic_raw_gpios[i]); 42 43 srcmd = cpu_to_le32(srcmd); 44 ackcmd = cpu_to_le32(ackcmd); 45 46 /* 47 * Wait a while, the PIC needs quite a bit of time between the 48 * two GPIO commands. 49 */ 50 mdelay(3000); 51 52 asm volatile ( 53 /* Align to a cache line */ 54 ".balign 32\n\t" 55 56 /* Enter self refresh */ 57 "str %[srcmd], [%[sdram_reg]]\n\t" 58 59 /* 60 * Wait 100 cycles for DDR to enter self refresh, by 61 * doing 50 times two instructions. 62 */ 63 "mov r1, #50\n\t" 64 "1: subs r1, r1, #1\n\t" 65 "bne 1b\n\t" 66 67 /* Issue the command ACK */ 68 "str %[ackcmd], [%[gpio_ctrl]]\n\t" 69 70 /* Trap the processor */ 71 "b .\n\t" 72 : : [srcmd] "r" (srcmd), [sdram_reg] "r" (sdram_reg), 73 [ackcmd] "r" (ackcmd), [gpio_ctrl] "r" (gpio_ctrl) : "r1"); 74 } 75 76 static int __init mvebu_armada_pm_init(void) 77 { 78 struct device_node *np; 79 struct device_node *gpio_ctrl_np = NULL; 80 int ret = 0, i; 81 82 if (!of_machine_is_compatible("marvell,axp-gp")) 83 return -ENODEV; 84 85 np = of_find_node_by_name(NULL, "pm_pic"); 86 if (!np) 87 return -ENODEV; 88 89 for (i = 0; i < ARMADA_PIC_NR_GPIOS; i++) { 90 char *name; 91 struct of_phandle_args args; 92 93 name = kasprintf(GFP_KERNEL, "pic-pin%d", i); 94 if (!name) { 95 ret = -ENOMEM; 96 goto out; 97 } 98 99 pic_gpios[i] = fwnode_gpiod_get_index(of_fwnode_handle(np), 100 "ctrl", i, GPIOD_OUT_HIGH, 101 name); 102 ret = PTR_ERR_OR_ZERO(pic_gpios[i]); 103 if (ret) { 104 kfree(name); 105 goto out; 106 } 107 108 ret = of_parse_phandle_with_fixed_args(np, "ctrl-gpios", 2, 109 i, &args); 110 if (ret < 0) { 111 gpiod_put(pic_gpios[i]); 112 kfree(name); 113 goto out; 114 } 115 116 if (gpio_ctrl_np) 117 of_node_put(gpio_ctrl_np); 118 gpio_ctrl_np = args.np; 119 pic_raw_gpios[i] = args.args[0]; 120 } 121 122 gpio_ctrl = of_iomap(gpio_ctrl_np, 0); 123 if (!gpio_ctrl) { 124 ret = -ENOMEM; 125 goto out; 126 } 127 128 mvebu_pm_suspend_init(mvebu_armada_pm_enter); 129 130 out: 131 of_node_put(np); 132 of_node_put(gpio_ctrl_np); 133 return ret; 134 } 135 136 /* 137 * Registering the mvebu_board_pm_enter callback must be done before 138 * the platform_suspend_ops will be registered. In the same time we 139 * also need to have the gpio devices registered. That's why we use a 140 * device_initcall_sync which is called after all the device_initcall 141 * (used by the gpio device) but before the late_initcall (used to 142 * register the platform_suspend_ops) 143 */ 144 device_initcall_sync(mvebu_armada_pm_init); 145