1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * arch/arm/mach-mv78xx0/common.c 4 * 5 * Core functions for Marvell MV78xx0 SoCs 6 */ 7 8 #include <linux/kernel.h> 9 #include <linux/init.h> 10 #include <linux/io.h> 11 #include <linux/platform_device.h> 12 #include <linux/serial_8250.h> 13 #include <linux/ata_platform.h> 14 #include <linux/clk-provider.h> 15 #include <linux/ethtool.h> 16 #include <asm/hardware/cache-feroceon-l2.h> 17 #include <asm/mach/map.h> 18 #include <asm/mach/time.h> 19 #include <linux/platform_data/usb-ehci-orion.h> 20 #include <linux/platform_data/mtd-orion_nand.h> 21 #include <plat/time.h> 22 #include <plat/common.h> 23 #include <plat/addr-map.h> 24 #include "mv78xx0.h" 25 #include "bridge-regs.h" 26 #include "common.h" 27 28 static int get_tclk(void); 29 30 /***************************************************************************** 31 * Common bits 32 ****************************************************************************/ 33 int mv78xx0_core_index(void) 34 { 35 u32 extra; 36 37 /* 38 * Read Extra Features register. 39 */ 40 __asm__("mrc p15, 1, %0, c15, c1, 0" : "=r" (extra)); 41 42 return !!(extra & 0x00004000); 43 } 44 45 static int get_hclk(void) 46 { 47 int hclk; 48 49 /* 50 * HCLK tick rate is configured by DEV_D[7:5] pins. 51 */ 52 switch ((readl(SAMPLE_AT_RESET_LOW) >> 5) & 7) { 53 case 0: 54 hclk = 166666667; 55 break; 56 case 1: 57 hclk = 200000000; 58 break; 59 case 2: 60 hclk = 266666667; 61 break; 62 case 3: 63 hclk = 333333333; 64 break; 65 case 4: 66 hclk = 400000000; 67 break; 68 default: 69 panic("unknown HCLK PLL setting: %.8x\n", 70 readl(SAMPLE_AT_RESET_LOW)); 71 } 72 73 return hclk; 74 } 75 76 static void get_pclk_l2clk(int hclk, int core_index, int *pclk, int *l2clk) 77 { 78 u32 cfg; 79 80 /* 81 * Core #0 PCLK/L2CLK is configured by bits [13:8], core #1 82 * PCLK/L2CLK by bits [19:14]. 83 */ 84 if (core_index == 0) { 85 cfg = (readl(SAMPLE_AT_RESET_LOW) >> 8) & 0x3f; 86 } else { 87 cfg = (readl(SAMPLE_AT_RESET_LOW) >> 14) & 0x3f; 88 } 89 90 /* 91 * Bits [11:8] ([17:14] for core #1) configure the PCLK:HCLK 92 * ratio (1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6). 93 */ 94 *pclk = ((u64)hclk * (2 + (cfg & 0xf))) >> 1; 95 96 /* 97 * Bits [13:12] ([19:18] for core #1) configure the PCLK:L2CLK 98 * ratio (1, 2, 3). 99 */ 100 *l2clk = *pclk / (((cfg >> 4) & 3) + 1); 101 } 102 103 static int get_tclk(void) 104 { 105 int tclk_freq; 106 107 /* 108 * TCLK tick rate is configured by DEV_A[2:0] strap pins. 109 */ 110 switch ((readl(SAMPLE_AT_RESET_HIGH) >> 6) & 7) { 111 case 1: 112 tclk_freq = 166666667; 113 break; 114 case 3: 115 tclk_freq = 200000000; 116 break; 117 default: 118 panic("unknown TCLK PLL setting: %.8x\n", 119 readl(SAMPLE_AT_RESET_HIGH)); 120 } 121 122 return tclk_freq; 123 } 124 125 126 /***************************************************************************** 127 * I/O Address Mapping 128 ****************************************************************************/ 129 static struct map_desc mv78xx0_io_desc[] __initdata = { 130 { 131 .virtual = (unsigned long) MV78XX0_CORE_REGS_VIRT_BASE, 132 .pfn = 0, 133 .length = MV78XX0_CORE_REGS_SIZE, 134 .type = MT_DEVICE, 135 }, { 136 .virtual = (unsigned long) MV78XX0_REGS_VIRT_BASE, 137 .pfn = __phys_to_pfn(MV78XX0_REGS_PHYS_BASE), 138 .length = MV78XX0_REGS_SIZE, 139 .type = MT_DEVICE, 140 }, 141 }; 142 143 void __init mv78xx0_map_io(void) 144 { 145 unsigned long phys; 146 147 /* 148 * Map the right set of per-core registers depending on 149 * which core we are running on. 150 */ 151 if (mv78xx0_core_index() == 0) { 152 phys = MV78XX0_CORE0_REGS_PHYS_BASE; 153 } else { 154 phys = MV78XX0_CORE1_REGS_PHYS_BASE; 155 } 156 mv78xx0_io_desc[0].pfn = __phys_to_pfn(phys); 157 158 iotable_init(mv78xx0_io_desc, ARRAY_SIZE(mv78xx0_io_desc)); 159 } 160 161 162 /***************************************************************************** 163 * CLK tree 164 ****************************************************************************/ 165 static struct clk *tclk; 166 167 static void __init clk_init(void) 168 { 169 tclk = clk_register_fixed_rate(NULL, "tclk", NULL, 0, get_tclk()); 170 171 orion_clkdev_init(tclk); 172 } 173 174 /***************************************************************************** 175 * EHCI 176 ****************************************************************************/ 177 void __init mv78xx0_ehci0_init(void) 178 { 179 orion_ehci_init(USB0_PHYS_BASE, IRQ_MV78XX0_USB_0, EHCI_PHY_NA); 180 } 181 182 183 /***************************************************************************** 184 * EHCI1 185 ****************************************************************************/ 186 void __init mv78xx0_ehci1_init(void) 187 { 188 orion_ehci_1_init(USB1_PHYS_BASE, IRQ_MV78XX0_USB_1); 189 } 190 191 192 /***************************************************************************** 193 * EHCI2 194 ****************************************************************************/ 195 void __init mv78xx0_ehci2_init(void) 196 { 197 orion_ehci_2_init(USB2_PHYS_BASE, IRQ_MV78XX0_USB_2); 198 } 199 200 201 /***************************************************************************** 202 * GE00 203 ****************************************************************************/ 204 void __init mv78xx0_ge00_init(struct mv643xx_eth_platform_data *eth_data) 205 { 206 orion_ge00_init(eth_data, 207 GE00_PHYS_BASE, IRQ_MV78XX0_GE00_SUM, 208 IRQ_MV78XX0_GE_ERR, 209 MV643XX_TX_CSUM_DEFAULT_LIMIT); 210 } 211 212 213 /***************************************************************************** 214 * GE01 215 ****************************************************************************/ 216 void __init mv78xx0_ge01_init(struct mv643xx_eth_platform_data *eth_data) 217 { 218 orion_ge01_init(eth_data, 219 GE01_PHYS_BASE, IRQ_MV78XX0_GE01_SUM, 220 MV643XX_TX_CSUM_DEFAULT_LIMIT); 221 } 222 223 224 /***************************************************************************** 225 * GE10 226 ****************************************************************************/ 227 void __init mv78xx0_ge10_init(struct mv643xx_eth_platform_data *eth_data) 228 { 229 u32 dev, rev; 230 231 /* 232 * On the Z0, ge10 and ge11 are internally connected back 233 * to back, and not brought out. 234 */ 235 mv78xx0_pcie_id(&dev, &rev); 236 if (dev == MV78X00_Z0_DEV_ID) { 237 eth_data->phy_addr = MV643XX_ETH_PHY_NONE; 238 eth_data->speed = SPEED_1000; 239 eth_data->duplex = DUPLEX_FULL; 240 } 241 242 orion_ge10_init(eth_data, GE10_PHYS_BASE, IRQ_MV78XX0_GE10_SUM); 243 } 244 245 246 /***************************************************************************** 247 * GE11 248 ****************************************************************************/ 249 void __init mv78xx0_ge11_init(struct mv643xx_eth_platform_data *eth_data) 250 { 251 u32 dev, rev; 252 253 /* 254 * On the Z0, ge10 and ge11 are internally connected back 255 * to back, and not brought out. 256 */ 257 mv78xx0_pcie_id(&dev, &rev); 258 if (dev == MV78X00_Z0_DEV_ID) { 259 eth_data->phy_addr = MV643XX_ETH_PHY_NONE; 260 eth_data->speed = SPEED_1000; 261 eth_data->duplex = DUPLEX_FULL; 262 } 263 264 orion_ge11_init(eth_data, GE11_PHYS_BASE, IRQ_MV78XX0_GE11_SUM); 265 } 266 267 /***************************************************************************** 268 * I2C 269 ****************************************************************************/ 270 void __init mv78xx0_i2c_init(void) 271 { 272 orion_i2c_init(I2C_0_PHYS_BASE, IRQ_MV78XX0_I2C_0, 8); 273 orion_i2c_1_init(I2C_1_PHYS_BASE, IRQ_MV78XX0_I2C_1, 8); 274 } 275 276 /***************************************************************************** 277 * SATA 278 ****************************************************************************/ 279 void __init mv78xx0_sata_init(struct mv_sata_platform_data *sata_data) 280 { 281 orion_sata_init(sata_data, SATA_PHYS_BASE, IRQ_MV78XX0_SATA); 282 } 283 284 285 /***************************************************************************** 286 * UART0 287 ****************************************************************************/ 288 void __init mv78xx0_uart0_init(void) 289 { 290 orion_uart0_init(UART0_VIRT_BASE, UART0_PHYS_BASE, 291 IRQ_MV78XX0_UART_0, tclk); 292 } 293 294 295 /***************************************************************************** 296 * UART1 297 ****************************************************************************/ 298 void __init mv78xx0_uart1_init(void) 299 { 300 orion_uart1_init(UART1_VIRT_BASE, UART1_PHYS_BASE, 301 IRQ_MV78XX0_UART_1, tclk); 302 } 303 304 305 /***************************************************************************** 306 * UART2 307 ****************************************************************************/ 308 void __init mv78xx0_uart2_init(void) 309 { 310 orion_uart2_init(UART2_VIRT_BASE, UART2_PHYS_BASE, 311 IRQ_MV78XX0_UART_2, tclk); 312 } 313 314 /***************************************************************************** 315 * UART3 316 ****************************************************************************/ 317 void __init mv78xx0_uart3_init(void) 318 { 319 orion_uart3_init(UART3_VIRT_BASE, UART3_PHYS_BASE, 320 IRQ_MV78XX0_UART_3, tclk); 321 } 322 323 /***************************************************************************** 324 * Time handling 325 ****************************************************************************/ 326 void __init mv78xx0_init_early(void) 327 { 328 orion_time_set_base(TIMER_VIRT_BASE); 329 if (mv78xx0_core_index() == 0) 330 mvebu_mbus_init("marvell,mv78xx0-mbus", 331 BRIDGE_WINS_CPU0_BASE, BRIDGE_WINS_SZ, 332 DDR_WINDOW_CPU0_BASE, DDR_WINDOW_CPU_SZ); 333 else 334 mvebu_mbus_init("marvell,mv78xx0-mbus", 335 BRIDGE_WINS_CPU1_BASE, BRIDGE_WINS_SZ, 336 DDR_WINDOW_CPU1_BASE, DDR_WINDOW_CPU_SZ); 337 } 338 339 void __ref mv78xx0_timer_init(void) 340 { 341 orion_time_init(BRIDGE_VIRT_BASE, BRIDGE_INT_TIMER1_CLR, 342 IRQ_MV78XX0_TIMER_1, get_tclk()); 343 } 344 345 346 /***************************************************************************** 347 * General 348 ****************************************************************************/ 349 static char * __init mv78xx0_id(void) 350 { 351 u32 dev, rev; 352 353 mv78xx0_pcie_id(&dev, &rev); 354 355 if (dev == MV78X00_Z0_DEV_ID) { 356 if (rev == MV78X00_REV_Z0) 357 return "MV78X00-Z0"; 358 else 359 return "MV78X00-Rev-Unsupported"; 360 } else if (dev == MV78100_DEV_ID) { 361 if (rev == MV78100_REV_A0) 362 return "MV78100-A0"; 363 else if (rev == MV78100_REV_A1) 364 return "MV78100-A1"; 365 else 366 return "MV78100-Rev-Unsupported"; 367 } else if (dev == MV78200_DEV_ID) { 368 if (rev == MV78100_REV_A0) 369 return "MV78200-A0"; 370 else 371 return "MV78200-Rev-Unsupported"; 372 } else { 373 return "Device-Unknown"; 374 } 375 } 376 377 static int __init is_l2_writethrough(void) 378 { 379 return !!(readl(CPU_CONTROL) & L2_WRITETHROUGH); 380 } 381 382 void __init mv78xx0_init(void) 383 { 384 int core_index; 385 int hclk; 386 int pclk; 387 int l2clk; 388 389 core_index = mv78xx0_core_index(); 390 hclk = get_hclk(); 391 get_pclk_l2clk(hclk, core_index, &pclk, &l2clk); 392 393 printk(KERN_INFO "%s ", mv78xx0_id()); 394 printk("core #%d, ", core_index); 395 printk("PCLK = %dMHz, ", (pclk + 499999) / 1000000); 396 printk("L2 = %dMHz, ", (l2clk + 499999) / 1000000); 397 printk("HCLK = %dMHz, ", (hclk + 499999) / 1000000); 398 printk("TCLK = %dMHz\n", (get_tclk() + 499999) / 1000000); 399 400 if (IS_ENABLED(CONFIG_CACHE_FEROCEON_L2)) 401 feroceon_l2_init(is_l2_writethrough()); 402 403 /* Setup root of clk tree */ 404 clk_init(); 405 } 406 407 void mv78xx0_restart(enum reboot_mode mode, const char *cmd) 408 { 409 /* 410 * Enable soft reset to assert RSTOUTn. 411 */ 412 writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK); 413 414 /* 415 * Assert soft reset. 416 */ 417 writel(SOFT_RESET, SYSTEM_SOFT_RESET); 418 419 while (1) 420 ; 421 } 422