xref: /openbmc/linux/arch/arm/mach-ixp4xx/Kconfig (revision f15cbe6f) 
1if ARCH_IXP4XX
2
3config ARCH_SUPPORTS_BIG_ENDIAN
4	bool
5	default y
6
7menu "Intel IXP4xx Implementation Options"
8
9comment "IXP4xx Platforms"
10
11config MACH_NSLU2
12	bool
13	prompt "Linksys NSLU2"
14	select PCI
15	help
16	  Say 'Y' here if you want your kernel to support Linksys's
17	  NSLU2 NAS device. For more information on this platform,
18	  see http://www.nslu2-linux.org
19
20config MACH_AVILA
21	bool "Avila"
22	select PCI
23	help
24	  Say 'Y' here if you want your kernel to support the Gateworks
25	  Avila Network Platform. For more information on this platform,
26	  see <file:Documentation/arm/IXP4xx>.
27
28config MACH_LOFT
29    bool "Loft"
30    depends on MACH_AVILA
31    help
32	  Say 'Y' here if you want your kernel to support the Giant
33	  Shoulder Inc Loft board (a minor variation on the standard
34	  Gateworks Avila Network Platform).
35
36config ARCH_ADI_COYOTE
37	bool "Coyote"
38	select PCI
39	help
40	  Say 'Y' here if you want your kernel to support the ADI
41	  Engineering Coyote Gateway Reference Platform. For more
42	  information on this platform, see <file:Documentation/arm/IXP4xx>.
43
44config MACH_GATEWAY7001
45	bool "Gateway 7001"
46	select PCI
47	help
48	  Say 'Y' here if you want your kernel to support Gateway's
49	  7001 Access Point. For more information on this platform,
50	  see http://openwrt.org
51
52config MACH_WG302V2
53	bool "Netgear WG302 v2 / WAG302 v2"
54	select PCI
55	help
56	  Say 'Y' here if you want your kernel to support Netgear's
57	  WG302 v2 or WAG302 v2 Access Points. For more information
58	  on this platform, see http://openwrt.org
59
60config ARCH_IXDP425
61	bool "IXDP425"
62	help
63	  Say 'Y' here if you want your kernel to support Intel's
64	  IXDP425 Development Platform (Also known as Richfield).
65	  For more information on this platform, see <file:Documentation/arm/IXP4xx>.
66
67config MACH_IXDPG425
68	bool "IXDPG425"
69	help
70	  Say 'Y' here if you want your kernel to support Intel's
71	  IXDPG425 Development Platform (Also known as Montajade).
72	  For more information on this platform, see <file:Documentation/arm/IXP4xx>.
73
74config MACH_IXDP465
75	bool "IXDP465"
76	help
77	  Say 'Y' here if you want your kernel to support Intel's
78	  IXDP465 Development Platform (Also known as BMP).
79	  For more information on this platform, see <file:Documentation/arm/IXP4xx>.
80
81config MACH_KIXRP435
82	bool "KIXRP435"
83	help
84	  Say 'Y' here if you want your kernel to support Intel's
85	  KIXRP435 Reference Platform.
86	  For more information on this platform, see <file:Documentation/arm/IXP4xx>.
87
88#
89# IXCDP1100 is the exact same HW as IXDP425, but with a different machine
90# number from the bootloader due to marketing monkeys, so we just enable it
91# by default if IXDP425 is enabled.
92#
93config ARCH_IXCDP1100
94	bool
95	depends on ARCH_IXDP425
96	default y
97
98config ARCH_PRPMC1100
99	bool "PrPMC1100"
100	help
101	  Say 'Y' here if you want your kernel to support the Motorola
102	  PrPCM1100 Processor Mezanine Module. For more information on
103	  this platform, see <file:Documentation/arm/IXP4xx>.
104
105config MACH_NAS100D
106	bool
107	prompt "NAS100D"
108	select PCI
109	help
110	  Say 'Y' here if you want your kernel to support Iomega's
111	  NAS 100d device. For more information on this platform,
112	  see http://www.nslu2-linux.org/wiki/NAS100d/HomePage
113
114config MACH_DSMG600
115	bool
116	prompt "D-Link DSM-G600 RevA"
117	select PCI
118	help
119	  Say 'Y' here if you want your kernel to support D-Link's
120	  DSM-G600 RevA device. For more information on this platform,
121	  see http://www.nslu2-linux.org/wiki/DSMG600/HomePage
122
123config	ARCH_IXDP4XX
124	bool
125	depends on ARCH_IXDP425 || MACH_IXDP465 || MACH_KIXRP435
126	default y
127
128config MACH_FSG
129	bool
130	prompt "Freecom FSG-3"
131	select PCI
132	help
133	  Say 'Y' here if you want your kernel to support Freecom's
134	  FSG-3 device. For more information on this platform,
135	  see http://www.nslu2-linux.org/wiki/FSG3/HomePage
136
137#
138# Certain registers and IRQs are only enabled if supporting IXP465 CPUs
139#
140config CPU_IXP46X
141	bool
142	depends on MACH_IXDP465
143	default y
144
145config CPU_IXP43X
146	bool
147	depends on MACH_KIXRP435
148	default y
149
150config MACH_GTWX5715
151	bool "Gemtek WX5715 (Linksys WRV54G)"
152	depends on ARCH_IXP4XX
153	select PCI
154	help
155		This board is currently inside the Linksys WRV54G Gateways.
156
157		IXP425 - 266mhz
158		32mb SDRAM
159		8mb Flash
160		miniPCI slot 0 does not have a card connector soldered to the board
161		miniPCI slot 1 has an ISL3880 802.11g card (Prism54)
162		npe0 is connected to a Kendin KS8995M Switch (4 ports)
163		npe1 is the "wan" port
164		"Console" UART is available on J11 as console
165		"High Speed" UART is n/c (as far as I can tell)
166		20 Pin ARM/Xscale JTAG interface on J2
167
168comment "IXP4xx Options"
169
170config DMABOUNCE
171	bool
172	default y
173	depends on PCI
174
175config IXP4XX_INDIRECT_PCI
176	bool "Use indirect PCI memory access"
177	depends on PCI
178	help
179          IXP4xx provides two methods of accessing PCI memory space:
180
181          1) A direct mapped window from 0x48000000 to 0x4bffffff (64MB).
182             To access PCI via this space, we simply ioremap() the BAR
183             into the kernel and we can use the standard read[bwl]/write[bwl]
184             macros. This is the preferred method due to speed but it
185             limits the system to just 64MB of PCI memory. This can be
186             problematic if using video cards and other memory-heavy devices.
187
188          2) If > 64MB of memory space is required, the IXP4xx can be
189	     configured to use indirect registers to access PCI This allows
190	     for up to 128MB (0x48000000 to 0x4fffffff) of memory on the bus.
191	     The disadvantage of this is that every PCI access requires
192	     three local register accesses plus a spinlock, but in some
193	     cases the performance hit is acceptable. In addition, you cannot
194	     mmap() PCI devices in this case due to the indirect nature
195	     of the PCI window.
196
197	  By default, the direct method is used. Choose this option if you
198	  need to use the indirect method instead. If you don't know
199	  what you need, leave this option unselected.
200
201config IXP4XX_QMGR
202	tristate "IXP4xx Queue Manager support"
203	help
204	  This driver supports IXP4xx built-in hardware queue manager
205	  and is automatically selected by Ethernet and HSS drivers.
206
207config IXP4XX_NPE
208	tristate "IXP4xx Network Processor Engine support"
209	select HOTPLUG
210	select FW_LOADER
211	help
212	  This driver supports IXP4xx built-in network coprocessors
213	  and is automatically selected by Ethernet and HSS drivers.
214
215endmenu
216
217endif
218