1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * Copyright (C) 1999 ARM Limited 4 * Copyright (C) 2000 Deep Blue Solutions Ltd 5 * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved. 6 * Copyright 2008 Juergen Beisert, kernel@pengutronix.de 7 * Copyright 2009 Ilya Yanok, Emcraft Systems Ltd, yanok@emcraft.com 8 */ 9 10 #include <linux/kernel.h> 11 #include <linux/clk.h> 12 #include <linux/io.h> 13 #include <linux/err.h> 14 #include <linux/delay.h> 15 #include <linux/of.h> 16 #include <linux/of_address.h> 17 18 #include <asm/system_misc.h> 19 #include <asm/proc-fns.h> 20 #include <asm/mach-types.h> 21 #include <asm/hardware/cache-l2x0.h> 22 23 #include "common.h" 24 #include "hardware.h" 25 26 static void __iomem *wdog_base; 27 static struct clk *wdog_clk; 28 static int wcr_enable = (1 << 2); 29 30 /* 31 * Reset the system. It is called by machine_restart(). 32 */ 33 void mxc_restart(enum reboot_mode mode, const char *cmd) 34 { 35 if (!wdog_base) 36 goto reset_fallback; 37 38 if (!IS_ERR(wdog_clk)) 39 clk_enable(wdog_clk); 40 41 /* Assert SRS signal */ 42 imx_writew(wcr_enable, wdog_base); 43 /* 44 * Due to imx6q errata ERR004346 (WDOG: WDOG SRS bit requires to be 45 * written twice), we add another two writes to ensure there must be at 46 * least two writes happen in the same one 32kHz clock period. We save 47 * the target check here, since the writes shouldn't be a huge burden 48 * for other platforms. 49 */ 50 imx_writew(wcr_enable, wdog_base); 51 imx_writew(wcr_enable, wdog_base); 52 53 /* wait for reset to assert... */ 54 mdelay(500); 55 56 pr_err("%s: Watchdog reset failed to assert reset\n", __func__); 57 58 /* delay to allow the serial port to show the message */ 59 mdelay(50); 60 61 reset_fallback: 62 /* we'll take a jump through zero as a poor second */ 63 soft_restart(0); 64 } 65 66 void __init mxc_arch_reset_init(void __iomem *base) 67 { 68 wdog_base = base; 69 70 wdog_clk = clk_get_sys("imx2-wdt.0", NULL); 71 if (IS_ERR(wdog_clk)) 72 pr_warn("%s: failed to get wdog clock\n", __func__); 73 else 74 clk_prepare(wdog_clk); 75 } 76 77 #ifdef CONFIG_SOC_IMX1 78 void __init imx1_reset_init(void __iomem *base) 79 { 80 wcr_enable = (1 << 0); 81 mxc_arch_reset_init(base); 82 } 83 #endif 84 85 #ifdef CONFIG_CACHE_L2X0 86 void __init imx_init_l2cache(void) 87 { 88 void __iomem *l2x0_base; 89 struct device_node *np; 90 unsigned int val; 91 92 np = of_find_compatible_node(NULL, NULL, "arm,pl310-cache"); 93 if (!np) 94 return; 95 96 l2x0_base = of_iomap(np, 0); 97 if (!l2x0_base) 98 goto put_node; 99 100 if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)) { 101 /* Configure the L2 PREFETCH and POWER registers */ 102 val = readl_relaxed(l2x0_base + L310_PREFETCH_CTRL); 103 val |= L310_PREFETCH_CTRL_DBL_LINEFILL | 104 L310_PREFETCH_CTRL_INSTR_PREFETCH | 105 L310_PREFETCH_CTRL_DATA_PREFETCH; 106 107 /* Set perfetch offset to improve performance */ 108 val &= ~L310_PREFETCH_CTRL_OFFSET_MASK; 109 val |= 15; 110 111 writel_relaxed(val, l2x0_base + L310_PREFETCH_CTRL); 112 } 113 114 iounmap(l2x0_base); 115 put_node: 116 of_node_put(np); 117 } 118 #endif 119